FCC:Receiver File Adapter

Hi
This is regarding a FCC in receiver File Adapter
My requirement is as follows :
I have the following source structure
DT_Source
Structure
Field 1
Field 2
Field 3
The target file to be created will contain all the 3 fields mapped directly from the source.
but in additional to these 3 fields it will also contain 3 constants ..which aren't coming from the source.
Do I need to include that in the Target data type and map them as constant values in the mapping or can the addition of constant values be taken care of in the File Content conversion ?
thanks
Dev

Thanks Shabarish
So you mean once i get a sample file , according to the blank spaces in the resultant i should have a corresponding field in my target Message type and map it toa constant white spaces ??
ok I have one last question
Can the FIle(on the receiver side ) be a mix of values which are fixed as well as variable lenghs ??
i.e
a typical line item in the file will be like this
Field1,Field2,Constant1, ,Constant2,Field3, ,Constant3,Field4,Constant4
where Field1 and Field3 are fixed length fields with the constants and field 4 and field5 are of variable lengths ????
thanks
Dev

Similar Messages

FCC receiver file adapter new line 'nl' is not working

Hi Experts,
I am doing idoc to file scenario,i have to creart a text file in which each line will have a record.
i am using
Recordset Structure -->DeliveryRecords
DeliveryRecords.addHeaderLine 0
DeliveryRecords.fieldFixedLengths 4,25,3,10,10,10,8,18,40,10,13,15,10,4
DeliveryRecords.fieldSeparator '0x09'
DeliveryRecords.endSeparator 'nl'
but new line is not working every thing is coming in the same line.i have also tried with '0x0A' , this is also not working.
Pls suggest what can be done.??

Hi
You have to use either fieldFixedLength or fieldSeparator.
You should not mix together.
DeliveryRecords.addHeaderLine 0
DeliveryRecords.fielNames aa,bb,cc,dd,ee,ff,gg,hh,ii,jj,kk,ll,mm,nn
DeliveryRecords.fieldFixedLengths 4,25,3,10,10,10,8,18,40,10,13,15,10,4
or
DeliveryRecords.addHeaderLine 0
DeliveryRecords.fielNames aa,bb,cc,dd,ee,ff,gg,hh,ii,jj,kk,ll,mm,nn
DeliveryRecords.fieldSeparator '0x09'
DeliveryRecords.endSeparator 'nl'
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion

RECEIVER FILE ADAPTER FCC ERROR

Hi team
My scenario is a text file has to be picked up by PI, has to processe it and the receiver is Proxy and it has to get updated and sent back to FTP location.
i am using Sender File Adapter with FCC and Also receiver File Adapter with FCC.
Both the sender and receiver structures are same; i am using the same FCC parameters for both the sides.
in Receiver File Adapter i am getting the following errors
1) Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found:
Parameter '.fieldFixedLengths' or '.fieldSeparator' is missing
2)Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found:
Parameter '1.fieldFixedLengths' or '1.fieldSeparator' is missing
please help me out
thank you
Edited by: vemugantivn on Aug 16, 2010 12:19 PM

Hi,
> 1) Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found:
> Parameter '.fieldFixedLengths' or '.fieldSeparator' is missing
> 2)Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found:
> Parameter '1.fieldFixedLengths' or '1.fieldSeparator' is missing
It is saying that you are not using the fieldSeparator parqameter.
have you provided the field separator parameter? if not then give like below
order_row.fieldSeparator : , (give what ever the separater you are using)
or
order_row.fieldSeparator : 10,5,... (if you are using fixed length)
Regards
Ramesh

Error in Receiver File adapter - FCC

Got error message as "File Adapter Receiver Channel CC_OB_REQ: Not initialized - cannot proceed: null"
My requirement is to send IDOC to file which consists of 4 fields, My target message interface is
MT_REQ
FILE_STRUC
    FILE_OP
       AAA (Field1)
        BBB(Field2)
       CCC(Field3)
       DDD(Field4)
Output file should contain the above 4 fields with fixed lengths 20,1,1,2
So I declared FCC in File Adapter as
I tried many options
RecordSet Structure: MT_REQ,FILE_STRUC,FILE_OP
FILE_STRUC.fieldSeparator - 'nl'
FILE_OP.fixedFieldLengths - 20,1,1,2
FILE_OP.fieldSeparator - 'nl'
FILE_OP.endSeparator - 'nl'.
Please let me know where is the problem?
Thanks in advance,
Krishna

Hi Ramakrishana,
In FCC fixed length file format when your XML payload is goes to Adaptor engine, it should contain all fields in XML. Otherwise its throw error in FCC channel. Please check receiver payload at SXMB_MONI or message monitoring of Run time work bench. In that payload you will find that some of the fields is not generated in target payload.
Field in receiver payload is not generated means from sender payload corresponding field is not coming. As per my past experience this generally happens in IDOC sender.
solution:- In message mapping in every field from IDOC to file use mapWithDefault node function with null value. Due to this though if any field do not generates in IDOC, corresponding field will generate in File Payload and it will not throw error in FCC.
Regards,
Prashant

FCC Parameters are required in the Receiver File Adapter

Hi ,
   Sorry for posting this question again.. my Structure is
MT_CADVICE_STRING
.     . Batach -
1:Unbounded (Node)
.     .      .Header_String -
1:1
.     .      .Line_Item       -
1:Unbounded (Node)
.     .      .      .LineItem_String -
1:1
for this structure I'm geting data in the XML format.. .. my scenario is simple File to File scenario.. now i want to convert this XML to a normal Text file by using FCC in the Receiver file adapter..
and in the Receiver side   i want the file in the bellow format: (each field i want to get in the separate line but at presnt I'm getting the continution of all lines I'm not getting the data in a separate lines..)
Header_string
LineItem_String
LineItem_String
Header_String
LineItem_String
so, any abody can help on this...
And in the Receiver Communication channel i keep the FCC parameters like as bellow :
RecordsetStructure : Batch,LineItem
Batch.fieldSeparator: 'nl'
LineItem.fieldSeparator: 'nl'
Batch.endSeparator: 'nl'
LineItem.endSeparator: 'nl'
For more information.. My source file is like bellow
<?xml version="1.0" encoding="utf-8" ?>
- <nr1:MT_CADVICE_STRING xmlns:nr1="urn:Test.com:SD:CAdvice">
- <Batch>
<Header_String>1 B 1110300014200804108218 36892.80 03 10.000 10.000 0.00 0.00 008000021720080410558000.00 91958.40 649958.40 0.00 649958.40 2678.40 1000003461100000346110000034611000003461123456 18 18 0.00 $</Header_String>
- <LineItem>
<LineItem_String>2 B 1110300014 1 000000000001234567000000000001 5.000 0.00 45000.00 10800.00.00 16.00 279000.00 0.00 rcl/ML0080200804100000000357 200804100.00 01 02 000000002.00 860.13321.00 $</LineItem_String>
</LineItem>
- <LineItem>
<LineItem_String>2 B 1110300014 2 000000000001234567000000000001 5.000 0.00 45000.00 10800.00.00 16.00 279000.00 0.00 rcl/ML0080200804100000000357 200804100.00 01 02 000000002.00 860.13321.00 $</LineItem_String>
</LineItem>
</Batch>
</nr1:MT_CADVICE_STRING >
Regards
Jain

Hi jain
Provide as below definitely it will work,
RecordSet Structure : batch,Line_Item,LineItem_String
batch.fieldSeparator        ---      'nl'
Line_Item.fieldSeparator -
     'nl'
LineItem_String.fieldSeparator ---   'nl'
All your fields will come in a separate line.
Regards,
Sasi
Edited by: sasitharan on Jul 28, 2008 11:36 AM

Tab delimitter in HeaderLine in FCC in receiver file adapter

Hi Folks,
I want to use tab as a field separator for (eg) NameA.Headerline.
instead of comma in file content conversion in receiver File adapter communication channel.
example:
Recordset structure : NameA
NameA.addHeaderLine : 3
NameA:headerLine : MaterialID,Price,Quantity
PS: In NameA.headerline i want to use tab instead of comma.
How can i do that?
Thanks
Prabaharan

Hi Beena,
could you explain on which context we should use that option:
NameA.addHeaderLine - 1 ( Header line with column names from the XML document )
what it does exactly?
Thanks
Prabaharan
Edited by: Prabaharan on Aug 21, 2008 12:02 AM

Problem with fixedlenthgs in receiver file adapter

HI,
I am doing XML to flat file scenario and using mutli mapping concept without BPM.
in the receiver file adapter I am using FCC with fixedlengths,then it generated just 3 output files out of nearly 100 source files.the errored one are succcessful in the SXMB_MONI and failing in RWB-->Message moni with waiting status and MDT says that XI_J2EE_ADAPTER_FILE ,Error Code PROCESSING_ERROR .
i tried in SDN and then found something like enable the disablesecurity check box in variable substitution parameters ,then I got 4 files out.
these are my FCC params for all structures:
struc1.fieldFixedLengths
struc1.fixedLengthTooShortHandling
struc1.endSeparator
and I tried with fieldSeparator then it gives successfully all output files.
so,where is the problem?I didnt understand?
any suggestion.
thank you,
regards,
Babu Sri

Bhavesh,
I felt the same way,but assumed that ,in that way fixedlenghths wont work.
in my target structure most of the fields have 0-1 occurences ,and even in the source structure too.so,I think it might be the reason.Then I have to make all my about 60fields 1-1 madatory and using mapWithDefaultValue function, as my sources are optional.
you think it will work just using the "mapWithDefaultValue" function without changing my occurences to 1-1 in the target structure(mandatory)?infact I can try but ,cos of pain for changing like 60 fields....:) and even dont know which fields are causing the problem,so that we can apply "mapWithDefaultValue" function only on those fields.
thank you,
Babu Sri

0 byte txt file using receiver File Adapter

HI,
My scenario is Flat File to Fixed Length File.
Mapping : Based on the condition Reciever node need to generated , In some cases it wont generate any node ( No data )
Receiver Communication channel : I used FCC for Fixed length Format.
Problem : When i am generatingf the receiver file with some data it executes. But when i am generating the file with no data , it fails in the receiver comminication channel.
Could not process due to error: java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'ns0:Message1' found in document', probably configuration error in file adapter (XML parser error)'
I need the receiver file to generate with 0 bytes when there is empty data.
can any one help on this.
Thanks

Hi,
>>Problem : When i am generatingf the receiver file with some data it executes. But when i am generating the file with no data , it fails in the receiver comminication channel.
What happens in this case is, when you send a blank file to PI it processes but once it went to Receiver Adapter, it looks out for some fields because of the FCC settings. So it throws an error/exception because some fields are expected and it is not coming. Because of that you getting below exception.
Secondly, Once you send data with few values or fields it will process in Receiver file adapter FCC and if there is some error it throws error. this is why you getting exception in moni, and other places.
Regards
Aashish Sinha

Receiver File adapter content conversion using StrictXml2PlainBean

Hi All,
For receiver file adapter i am using the module StrictXml2PlainBean, and also i mentioned the module configuration like this
parameter name                              parameter value
recordTypes                                  Header,TransactionHeader,TransactionDetail,TransactionTrailer,FileTrailer
FileTrailer.endSeparator                |\n
FileTrailer.fieldSeparator               |
Header.endSeparator                   |\n
Header.fieldSeparator                  |
TransactionDetail.endSeparator   |\n
TransactionDetail.fieldSeparator |
TransactionHeader.endSeparator |\n
TransactionHeader.fieldSeparator |
TransactionTrailer.endSeparator |\n
TransactionTrailer.fieldSeparator |
But when i send the idoc, The receiver CC is throwing an error
Message processing failed. Cause: com.sap.aii.af.modules.conversion.xml2plain.ConversionException: Invalid structure name encountered during conversion: Transaction at XML element MT_DeliveryOrder,Transaction
My actual structure is
MT_DelvOrder
   Header 0...1
   Transaction 0....Unbounded
      TransactionHeader 1..1
       TransactionDetail     0...unbounded
        TransactionTrailer 1...1
   FileTrailer 0...1
The module is checking for the Transaction node,but i require the rest 3.
Same configuration i have done successfully with FCC without using the module....
So can any one suggest me where i am missing... why the module is pointint towards, the Transaction cant i ignore this node . and continue with the rest???
Regards,
Sridhar
Edited by: sridhar reddy kondam on Aug 10, 2009 12:35 AM

Hi Rajesh,
The same FCC configuration was working fine with FCC and when i am using this module configuration i am getting the prob...
In the file i need the Header,TransactionHeader,TransactionDetail,TransactionTail,Filetrailer
my sample output file is
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_DeliveryOrder>
<Header>
</Header>0...1
<Transaction>0...Unbounded
    <TransactionHeader> 1..1
     </TransactionHeader>
     <TransactionDetail> 0...Unbounded
     </TransactionDetail>
      <TransactionTrailer>1...1
       </TransactionTrailer>
</Transaction>
<FileTrailer> 0...1
</FileTrailer>
Any suggestions will be great help...
I think i need to go with other options without using this module....
Regards,
Sridhar
Edited by: sridhar reddy kondam on Aug 10, 2009 6:03 AM

Error in Receiver File adapter using File content Conversion

Hi,
I am getting the following error in the receiver file adapter.
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter 'statement.fieldFixedLengths' or 'statement.fieldSeparator' is missing
I am using the below parameters for FCC:
Recordset Structure - statement
statement.endSeparator - 'nl'
statement.fieldSeparator - '0X09'
statement.fieldNames -xblnr,wrbtr,newbs,kostl,newko,prctr,xref1,rke_wwfud,rke_wwst3,blart,bukrs,bldate,budat,gjahr,monat,ctype,waers,bktxt,posnr,wbs_element,mwxkz,businessplace,businessplace,c_waers,c_wrbtr,g_ctype,g_waers,g_wrbtr,h_ctype,h_waers,h_wrbtr,trade_id,lob,sgtxt,zuonr,reason_rev,ldgrp,tcode,lifnr
ignoreRecordsetName - true
Please let me know where i am going wrong.
Thanks,
Aparna

Hi Aparna,
I feel the problem in your content conversion parameters is with
statement.fieldNames and ignoreRecordsetName
When you are confirguring receiver file adapter for file content conversion the above one is not required. Please refer below link for details on configuring content conversion in file adapter
[http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm]
Hope this helps !!
Regards,
Amit

REG: File content conversion in Receiver file adapter

HI Gurus,
I have the scenario like proxy to file with content conversion
my message type for the source like this
MT_SOURCE
-----||
       |---ROW
------------||
                |---LINE
target strucuture also same
MT_TARGET
-----||
       |---ROW
------------||
                |---LINE
i am using the following FCC parameters in receiver file adapter
LINE.fieldSeparator = '                       '
LINE.fixedLineWidth = 90
LINE.lineSeparator = 'nl'
LINE.fieldFixedLengths = 200
LINE.endSeparator        = 'nl'
the output file show the data differently in note pad when compare to word
word output
dgepvs                       023456987
kgdd0016155710                SS Smw Ne 01
kgdd0016155710                SS Smw Ne 01
kgdd0016155710                SS Smw Ne 01
kgdd0016155710                SS Smw Ne 01
kgdd0016155710                SS Smw Ne 01
kgdd0016155710                SS Smw Ne 01
kgdd0016155710                SS Smw Ne 01
notepad out put
dgepvs           023456987   kgdd0016155710                SS Smw Ne 01       kgdd0016155710                SS Smw Ne 01          kgdd0016155710                SS Smw Ne 01            kgdd0016155710                SS Smw Ne 01    kgdd0016155710                SS Smw Ne 01
word output is the correct output wat i am expect but same out put i want in note pad can any help me out for this how can i resolve this
Thanks in advance

There is nothing wrong in your content conversion parameters. This is pure editors interpretation for the next line character.
I would do in java program to fix this issue using '\r\n'   You might want to try and see how that helps for notepad editor.

Problem with File Content Conversion (Receiver FIle Adapter)

Hi Experts,
I have following structure in receiver side:
MT_Test
   F1
   F2
   F3
   F4
Now I want a CSV file in target side in below format:
F1,F2,F3,F4
I have provided below config in receiver file adapter under content conversion tab:
Recordset Structure : MT_Test
MT_Test.fieldSeperator= ,
MT_Test.endSeperator= 'nl'
But this is generating blank CSV files in target directory..What might be the reason.. I have checked the msg in adapter engine, the XML file is correct and contains valid values for the fields..Its something like below:
<?xml version="1.0" encoding="UTF-8" ?>
<MT_Test>
   <F1>Hai</F1>
   <F2>Hello</F2>
   <F3>Bye</F3>
   <F4>Hi</F4>
</MT_Test>
I should get CSV file as
Hai,Hello,Bye,Hi
But I am getting a blank file with above said config parameters in content conversion tab.
What might be the reason for getting blank CSV files in target side???
Thanks,
Adi

Hi Adi,
>>My target structure in below format:
<?xml version="1.0" encoding="UTF-8" ?>
- <MT_Test>
<F1>Hai</F1>
<F2>Hello</F2>
<F3>Bye</F3>
<F4>Hi</F4>
</MT_Test>
So, try to edit Data type and include hierarchy level above <F1>.
Finally your Target Structure will resembles like this.
<?xml version="1.0" encoding="UTF-8" ?>
- <MT_Test>
<Structure>
<F1>Hai</F1>
<F2>Hello</F2>
<F3>Bye</F3>
<F4>Hi</F4>
</Structure>
</MT_Test>
FCC Parameters will be like this.
Structure.fieldSeparator = ,
Structure.endSeparator = 'nl'
Hope you were clear.
Thanks,
Siva.

Receiver File Adapter with File content Conversion

I have a requirement to send 2 different files to the target directory. Source is the same and different mapping for the 2 files.
This I can achieve through multi-mapping but there is a problem. How can I use the File content for receiver File adapter which is using Multimapping.
The structure of the 2 files also different.

Why would you need FCC on receiver file adapter? If you need different files to be generated from the source, you could create two receiver channels with different mappings and just add them to the same Receiver Detemination. Isn't feasible?

Email attachment name in sender mail adapter to the receiver file adapter

HI ,
Ths is regarding email to file scenario. I am trying to create file (in rceiver file adapter) with the same name as the email attachment that i read from mail sender adapter. I want ro use adapter module for this. I could find from blogs that there is module - GetAttachmentName - available that i can use for this in sender mail adapter.
Can you please let me know what whetehr i neeed to mention any module key and parameters for this.
I assume , i need to do following steps :Please confirm.
1. i can use this module - after payload swap module and before standard mail adapter module in sender mail adapter
2. select ASMA option in advanced tab in sender mail adapter
3. In receiver file adapter select ASMA option in advanced tab in sender mail adapter
4. Also select file name option in ASMA in sender mail adapter
Thanks,
Vamsi

Hi Vamsi,
your scenario is also described here: Re: sender mail adapter - attachment name
If you use the Module getAttachmentName, which is described here,
http://wiki.sdn.sap.com/wiki/display/XI/AdapterModulePI7.0GetAttachmentName
your scenario should work as you described it.
You just need to make sure that the Attachment Name that you read in the first place, is mapped to the Filename Attribute of the
Fileadapter (http://sap.com/xi/XI/System/File/FileName).
regards,
Daniel

Receiver file adapter settings

Hi,
I have a scenario in which I need to generate a file in tab delimited format. But in the receiver file adapter configuration we have only text/binary file creation mode. By setting the File Type in TEXT mode will I be able to do a tab de-limited file?? Or is there any other configuration settings need to be done?
-Ken

Hi Amanda,
Thank you so much for the great info. I think I can find some stuff but still it would be helpful if you could forward the doc to [email protected] Also, yeah it looks like the receiving file format would be complex with header and footer. In the content conversion can we specify header and footer?? or is there any other way to define...FYI my source file also contains header and footer..I am just a little confused on how to set up the message types for mapping...
Many thanks..
-ken

FCC:Receiver File Adapter

Similar Messages

Maybe you are looking for