FCC Sender file adapter : Message Spitting 1:2
Hi expert
i am execuing a file to file scenario, with message splitting 1:n
1 source MT and 2 Target MT.
My source MT structure becomes as
Message
....Message1
.......SourceMT
................row
....................Field1
....................Field2
Now how to configure this structure at Sender file adapter
File Content Converson.
as after adding to MT at target side in message mapping...
2 extra hedder are added at source MT..
Regards
ajayp
> Message
> ....Message1
> .......SourceMT
> ................row
> ....................Field1
> ....................Field2
>
> Now how to configure this structure at Sender file adapter
> File Content Converson.
>
> as after adding to MT at target side in message mapping...
>
> 2 extra hedder are added at source MT..
Ignore 2 extra header and do your FCC as you do in normal scanario.
Similar Messages
-
FCC Send File Adapter - missingLastFields not working
Hi
I have a flat file to capture using the sender File adapter
Parameter as follows:
Header_fieldNames : Key,Name,StaffID,Telephone
Header_fieldFixedLengths : 2,12,10,8
Header_endSeparator : 'nl'
Line_fieldNames : Key,Address,Company,LineText
Line_fieldFixedLengths : 2,20,20,40
However there are times where last field come in missing.
Hence I use the Header_missingLastFields : error
Line_missingLastFields : error
However it does not seem to be working as the adapter fails to pick the file from the FTP folder
but if I replace error with ignore, the sender adapter picked the files and process and send to the receiver adapter.
I need to flagged error in sxmb_moni if last field or last few fields are missing....any advise how could this be achieve ?
Regards
FredHi Freddy,
I think you might like to specify missingLastFields = add. then it will add the missing fields as empty. you can further check if these are empty in mapping and then fail the message or create an alert.
If you specify "ignore" then you will not get those fields in your structure and if you specify "error" then the file will not be picked up.
have a look here
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
missingLastfields
If the inbound structure has less fields than specified in the configuration then the XML outbound structure is created as follows:
○ ignore
Outbound structure only contains the fields in the inbound structure
○ add
Outbound structure contains all fields from the configuration; the fields missing in the inbound structure are empty.
○ error
Conversion is terminated due to the incomplete inbound structure. An error message is displayed
regards,
francis -
Sender File adapter - Message per recordset
Hi All,
I have a scenario in where I have to split a large file (txt) into smaller files and then process them in PI.
Normally I use FCC and message per recordset... It splits all messages and everything is ok.
BUT, now I have to split the messages at specific key points. I cannot split it by a static number. It may vary. It is totally dynamic.
So I want to use the adapter module to write my own code to split the message when I need to. but how?
When using the FCC the messages get split before they even arrive at my adapter module. So is it possible to split them manually using adapter module???
Thanks.Hi Chris,
These are my thoughts on this issue. 40 MB (larger file) need to be split into small files (according to your requirement, at dynamic key points).
You can split large file using OS script, but it cannot be monitored using SAP PI infrastructure. I think you are considering writing an adapter module. So, I assume your PI system can handle that large file (40 MB) in memory. My opinion is, do not go with adapter module, as it is difficult to code, maintain and memory intensive. Try to create another new scenario, which picks up this large file, splits it into small pieces and place these small files in folder, from where current scenario picks up files. In new scenario, use Java Mapping (as input in not XML, we cannot use Graphical, XSLT) to split the payload at dynamic key points using OutputAttachments http://help.sap.com/javadocs/pi/SP3/xpi/com/sap/aii/mapping/api/OutputAttachments.html .
Hi All,
I have seen messages with multiple attachments which were processed in SAP PI (I have seen multiple attachments in SXI_MONITOR). I have not tried using OutputAttachments http://help.sap.com/javadocs/pi/SP3/xpi/index.html . Please let me know, whether we can generate multiple files from multiple attachments and place them in target directory using receiver file channel?
Regards,
Raghu_Vamsee -
Mapping problem due to FCC in sender file adapter
Hi All
I am doing File( Flat File ) to RFC Scenario.it is working fine..
the problem comes in mapping with multiple records.
FCC at sender file adapter is used
my Data Type are :
Source DT Target RFC import parameter(table).
E2ED20* ITEM*
KEY VBELN
VBELN POSNR
E2E24* CHARG
KEY
POSNR
CHARG
<b>*->>multiple occurence
E2ED20 and E2E24 are 2 segment ,KEY is used in FCC to identify E2EDL20 & E2EDL24</b>
My source text file is like this :
E2EDL20 0200
E2EDL24 xyz
E2EDL20 0201
E2EDL24 abc
E2EDL24 efg
E2EDL24 mln
E2EDL20 0202
E2EDL24 gty
so the payload should be :
0200 xyz
0201 abc
0201 efg
0201 mln
0202 gty
in <i>FCC ignoer record set= true</i>
otherwise is not called...
i try to use split by value & use oneasmany , not helpfull.
in message mapping when i checked th field VBELN -> display queue
i am getting an array 0200
0201
0202 in white fields
thanks & regards
Ashutosh Rawat<b>Source payload</b>
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MT_MATNO_FILE xmlns:ns="urn:abc:xxx">
- <E2ED20>
<KZ>E2EDL20</KZ>
<FIELD1>020</FIELD1>
<b><VBELN>0083662685</VBELN></b>
</E2ED20>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900001</POSNR>
<CHARG>1078629</CHARG>
<LFIMG>3200</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900002</POSNR>
<CHARG>1078630</CHARG>
<LFIMG>1895</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900003</POSNR>
<CHARG>1079145</CHARG>
<LFIMG>1883</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900004</POSNR>
<CHARG>1079146</CHARG>
<LFIMG>3195</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
- <E2ED20>
<KZ>E2EDL20</KZ>
<FIELD1>020</FIELD1>
<b> <VBELN>0083662648</VBELN></b>
</E2ED20>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900011</POSNR>
<CHARG>1001450</CHARG>
<LFIMG>2946</LFIMG>
<MEINS>8PC</MEINS>
</E2E24>
- <E2ED20>
<KZ>E2EDL20</KZ>
<FIELD1>020</FIELD1>
<b> <VBELN>0083673936</VBELN></b> </E2ED20>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900012</POSNR>
<CHARG>1073953</CHARG>
<LFIMG>2458</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
</ns:MT_MATNO_FILE>
<b>at target what required is</b>
<item>
<b><VBELN>0083662685</VBELN></b>
<POSNR>900001</POSNR>
</item>
<item>
<b><VBELN>0083662685</VBELN></b>
<POSNR>900002</POSNR>
</item>
<item>
<b><VBELN>0083662685</VBELN></b>
<POSNR>900003</POSNR>
</item>
<item>
<b><VBELN>0083662685</VBELN></b>
<POSNR>900004</POSNR>
</item>
<item>
<b><VBELN>0083662648</VBELN></b>
<POSNR>900011</POSNR>
</item>
<item>
<b><VBELN>0083673936</VBELN></b>
<POSNR>900012</POSNR>
</item>
in Sender FCC
E2ED20.fieldFixedLengths 7,76
E2ED20.fieldNames KZ,VBELN
E2ED20.keyFieldValue E1EDL20
E2ED20.endSeparator 'nl'
E2E24.fieldFixedLengths 7,24,13,7,3
E2E24.keyFieldValue E1EDL24
E2E24.fieldNames KZ,POSNR,CHARG,LFIMG,MEINS
E2E24.endSeparator 'nl'
ignoreRecordsetName true
source file is already there...
Message was edited by:
ashutosh rawat -
Problem in Sender File Adapter using FCC with Variable structure
Hi Experts,
Hi Experts,
I have facing an issues while using FCC in Sender File adapter. Below are the configs for the same:-
Recordset structure required is ==HEADER,1,DATA,*,TRAILER,1
Recordset per message == *
Key Field Name == Key
(Sorry i dont know how to insert screen shot here..pls tell me how can i insert screen shots here on sdn)
HEADER.fieldSeparator ,
HEADER.endSeparator u2018nlu2019
HEADER.fieldNames Key,x,y,zu2026
HEADER.keyFieldValue 1
HEADER.keyFieldInStructure ignore
HEADER.fieldContentFormatting trim
HEADER.additionalLastFields ignore
HEADER.missingLastFields ignore
DATA.fieldSeparator
DATA.endSeparator
DATA.fieldNames
DATA.keyFieldValue
DATA.keyFieldInStructure
DATA.fieldContentFormatting
DATA.additionalLastFields
DATA.missingLastFields
Using same variables for Trailer record as well.
Source CSV file which i am picking:-
ADSE ,RASD,replan Contact ,2 0080509 0 8:43:25 ,
EMPL ,0011111, S Top Up ,20080401 ,20080430 ,sdf , 00000000431250 ,2007 , , , , , ,20080414 18:07:35,
EMPL ,0222222, r Cash Award ,20070701 ,20070703 ,ded , 00000000023509 ,2007 , , , , , ,20080414 18:09:31,
EMPL ,0233333, Cash Award ,20070801 ,20070831 ,df , 00000000044057 ,2007 , , , , , ,20080414 18:10:56,
EMPL ,0244444, Cash Award ,20080101 ,20080111 ,sf , 00000000026717 ,2007 , , , , , ,20080414 18:08:29,
BTRL , 5140,
When i tested the scenario and monitored it using MDT in CC monitoring tool its giving me below mentioned error.
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
XML document must have a top level element. Error processing resource 'http://myurlname/mdt/me...
However if i change the occurence of DATA as some specific value for eg 4 instead of * it works fine.
Kindly help me in solving this problem.
Thanks,
Aditya VermaHi Madan,
Thanks a lot for giving me the way to this. But when i tested this with the below file its giving me the same error. Please let me know if i need to do any changes to the parameters mentioned above:-
ADSE ,ASDA,Sha replan Fr ont Feed Contact ,2 0080509 0 8:43:25 ,
EMPL ,0011111, Cash Top Up ,20080401 ,20080430 ,TPV , 00000000431250 ,2007 , , , , , ,20080414 18:07:35,
EMPL ,0222222, r Cash Award ,20070701 ,20070703 ,TPV , 00000000023509 ,2007 , , , , , ,20080414 18:09:31,
EMPL ,0233333, r Cash Award ,20070801 ,20070831 ,TPV , 00000000044057 ,2007 , , , , , ,20080414 18:10:56,
EMPL ,0244444, Cash Award ,20080101 ,20080111 ,TPV , 00000000026717 ,2007 , , , , , ,20080414 18:08:29,
EMPL ,0255555, Cash Award ,20080301 ,20080320 ,TPV , 00000000027870 ,2007 , , , , , ,20080414 18:08:25,
EMPL ,0266666, Cash Award ,20071001 ,20071020 ,TPV , 00000000020681 ,2007 , , , , , ,20080414 18:09:31,
EMPL ,0877777, Cash Top Up ,20080401 ,20080430 ,TPV , 00000000036000 ,2007 , , , , , ,20080414 18:07:05,
EMPL ,0888888, Leaver Cash Award ,20071201 ,20071231 ,TPV , 00000000157200 ,2007 , , , , , ,20080414 18:11:29,
EMPL ,0899999, S Leaver Cash Award ,20080301 ,20080331 ,TPV , 00000000153530 ,2007 , , , , , ,20080414 18:07:42,
EMPL ,0800000, S Leaver Cash Award ,20070701 ,20070731 ,TPV , 00000000012234 ,2007 , , , , , ,20080414 18:08:34,
BTRL , 5140,
This the original csv file which i'll get in live. Kindly suggest as ur solution worked with other file but not working with this scv file.
Thanks a lot,
Aditya. -
Required Changes in FCC Paramenters for Sender File Adapter.
Hi
I am Doing File-File Scenario.I am using FCC in the Sender File Adapter. I have defined the structure as below.
My Source Structure
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_Source xmlns:ns0="http://city.net/filecopy">
<Message>
<Id>123</Id>
<Head>
<Id>123</Id>
<Filename>test.xml</Filename>
</Head>
<Body>Helloworld</Body>
</Message>
</ns0:MT_Source_FILE>
So for the above structure, I have defined the FCC Parameters as
Document Name: MT_Source (Message Type)
Document Namespace:http://city.net/filecopy(Namespace)
Recordset Name: Message (root node)
Recordset Structure: Message,1,Head,1
Recordset Sequence: Ascending
Recordsets per message:1
Keyfield Type: string
In the Table Rows I have defined
Message.fieldFixedLengths: 3,10
Message.fieldNames: Id, Body
Message.fieldSeparator: ,
Message.endSeparator: 'nl'
Head.fieldFixedLengths: 3,8
Head.fieldSeparator: ,
Head.endSeparator: 'nl'
Head.fieldNames: Id, Filename.
My Input Text file
123,Helloworld
123,text.xml
I am Getting Output as
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MT_Source xmlns:ns="http://city.net/filecopy">
- <Message>
- <Message>
<Id>123</Id>
<Body>HelloWorld</Body>
</Message>
- <Head>
<Id>123</Id>
<Filename>test.xml</Filename>
</Head>
</Message>
</ns:MT_Source>
I should get Body field after Head Structure as in the Source Structure, So Please what changes do I need to do in the Parameters Specified above to get the desired Output.
So How should I define the FCC Paramenters For Sender File Adapter ?
Any Help Would be Appreciated.
Regards,
VarunHi Everyone,
I could Succeed to some extent.
I have defined the parameters as follows
Recordset Structure: Message,*,Head,1
Key Field Name: KZ
Key Field Type: integer
In the table, I defined the Parameters as
Message.fieldFixedLengths:1,3
Message.fieldNames:KZ,Id
Message.keyFieldValue:1
Message.keyFieldInStructure:ignore
Message.fieldSeparator:,
Message.endSeparator:'nl'
Head.fieldFixedLengths:1,3,8
Head.fieldNames:KZ,Id,filename
Head.keyFieldValue:2
Head.keyFieldInStructure:ignore
Head.fieldSeparator:,
Head.endSeparator:'nl'
Message.fieldFixedLengths:1,11
Message.fieldNames:KZ,Body
Message.keyFieldValue:3
Message.keyFieldInStructure:ignore
Message.fieldSeparator:,
Message.endSeparator:'nl'
My source text file
1,123
2,123,test.xml
3,Hello World
my output is
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MT_Source xmlns:ns="http://city.net/FileCopy">
- <Message>
- <Message>
<Id>123</Id>
</Message>
- <Head>
<Id>123</Id>
<Filename>test.xml</Filename>
</Head>
</Message>
</ns:MT_Source>
I got the output almost correct except I am not getting the value in the Body
Any help would be appreciated.
Please correct me If I am wrong.
Regards,
Varun
Edited by: Varun on Sep 2, 2008 12:06 PM
Edited by: Varun on Sep 2, 2008 12:15 PM -
Sender File Adapter - FCC - No incoming field separator - How to do FCC?
Hi,
I have a sender File adapter and I need to do the File Content Conversion but there apparently no incoming field separator and the file ocntains just running text - no data records but just information.
For example the incoming file is something like:
The Hongkong and Shanghai Banking Corporation Limited 27JAN2009 PAGE 1
Incorporated in Hong Kong with limited liability
ABC IAL LIMITED ABU DHABI, UAE
ABC MIDDLE EAST Account No. 001-8888888
ABU DHABI Payment Set AAA
BBB MAIL BOX NO.99 Contact Person ABC LIMITED
7777777777 Telephone
AUTOPAY LIST - PROCESSED
(AUTOPAY-OUT SALARY)
Payment Date 27JAN2009
First Party Narrative . 66666666
Second Party Narrative .
The Message type that I am mapping to contains:
MT_XXXX
WA
Item
Item2
Item3
This is so that the information can be mapped to different field areas and send across to the Receiver Mail Adapter. In the mail i receive, i get the running text. I tried giving the field separator as '0x09' but it is not working.
I have also tried WA..fieldContentFormatting to nothing but again no luck.
I have tried with Recordset Sequence with Ascending and variable and have also tried Recordsets per Message with * and blank - but it did not help.
Please advice.
Regards,
ArchanaHi,
I assumed that it was tab but when I made the change in FCC, it did not work.
I would still like to have a output where it looks like below if more than 2 types of information in 1 line as below:
ABC IAL LIMITED ABU DHABI, UAE
ABC MIDDLE EAST Account No. 001-9999999999999
and not something like:
ABC IAL LIMITED ABU DHABI, UAE
ABC MIDDLE EAST Account No. 001-999999999999
I am not sure what to do here.
Help please.
Regards,
Archana -
FCC Paramenters for Sender File Adapter
hi
I am using FCC in the Sender File Adapter. I have defined the structure as below. Fields ID, Filename, Values will be generated at Runtime as I have defined Used Defined Funtions for Both.
Only I will Pass the value in Body. i.e "Hello".
So How should I define the FCC Paramenters For Sender File Adapter ?
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_Source_FILE xmlns:ns0="http://city.net/FILEtoHTTP">
<Message>
<Id>123456</Id>
<Head>
<Id>123456</Id>
<Filename>sample.xml</Filename>
</Head>
<Body>hello</Body>
</Message>
</ns0:MT_Source_FILE>
In the source text file, Do I need to send only "Hello" value because ID and filename will be generated at runtime?
Regards,
Varun
Edited by: Varun on Sep 1, 2008 6:00 PMHi,
Refer this link:
http://help.sap.com/saphelp_NW04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
Regards,
Nithiyanandam -
Recordset per message in Sender File Adapter
Hi Friends
I have configured a sender file adapter to pick up *.txt files from a specific path, Since the file is having thousands of records it is failing to process the file at PI level . In order to avoid the problem I have kept Recordset Set Per Message as 10 , but still PI is processing all the records into a single message. Please help me in troubleshooting it.
Regards
Suman.Hi Suman,
Go thru these threads for troubleshooting...
Massive file
Processing huge file loads through XI
Processing of huge no of Inbound xml files
Bottleneck in Large file processing
How to process large data files in XI ? 100 MB files ?
Regds,
Pinangshuk. -
Hi
I have an excel file which I save as a csv extension. If I use FCC in Sender File Adapter, I need to add a module in my communication channel. Can anyone provide me with that?
Is this module generally deployed on XI server beforehand or do I have to write a java code and deploy it myself?
I have already had a look at this blog
/people/sap.user72/blog/2005/07/04/read-excel-instead-of-xml-through-fileadapter
VaibhavYou will have to create a module in this case.there is no standard module available for this fuctionality as of now.
Ref: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/02706f11-0d01-0010-e5ae-ac25e74c4c81 to help create a module. -
Sender File Adapter FCC Question
Hello folks!!
I am trying to configure a FCC for Sender file adapter and wanted to consider a Line feed Carriage return line which will look as below to be a empty tag in XML. After Line 4 there will be a blank line which identifies the start of next record. I tried using Field.MissingLastFields , Field.endSeparator etc., Perhaps I am not using the correct value. Any help appreciated.
Line1
Line2
Line3
Line4
Line1
The expected XML is as below:
<Record>Line1</Record>
<Record>Line2</Record>
<Record>Line3</Record>
<Record>Line4</Record>
<Record></Record>
<Record>Line1</Record>Hi Greg
Thanks for your feedback. I tried and it didn't work. below is the FCC i have in sender adapter
RecordSetName = RecordSet
RecordSetStructure = Dummy,*
Dummy.fieldNames = Record
Dummy.endSeparator = 'nl'
Dummy.missingLastfields = add
Dummy.ignoreRecordsetName = true
Dummy.fieldSeparator = 'nl' and also I tried with Dummy.fieldFixedLengths = 255 .
Still I don't get the empty tag for the blank line in the file, so my output is still same . Please note the blank line doesn't have a space so if I place the cursor and move to next in blank line it will go to next line ( Carriage return and line feed).
Please suggest . -
Sender File Adapter FCC to Hierarchial MT Coversion
Hi,
I have MT with structure as follows
Header 1..1
F1 string 1..1
F2 string 1..1
SUB 1 to unbounded
S11 string 1..1
S12 string 1..1
Can you anybody help me out how to convert the a CSV file to Convert the structure mentioned above using sender File Adapter FCC.
Regards,
Daniel.LAHi,
There is no suc h direct way to get the data from csv fiel with conversion.
Either you can use JAVA Mapping for it or use the adapter module to read csv files.
How to process CSV data with XI file adapter
/people/sap.user72/blog/2005/01/06/how-to-process-csv-data-with-xi-file-adapter
"JAVA MAPPING", an alternate way of reading a CSV file
/people/rahul.nawale2/blog/2006/07/18/java-mapping-an-alternate-way-of-reading-a-csv-file
There is one way that you could bypass IR (Integration Repository) for any type of files, see below link
/people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository
Making CSV File Lookup Possible In SAP XI !!!
/people/sundararamaprasad.subbaraman/blog/2005/12/09/making-csv-file-lookup-possible-in-sap-xi
This will help you
Thanks
Swarup -
Sender file adapter Need to Get Only one record Using FCC
Hi All,
I am using File to ABAP Proxy interface, where i need to Trigger my proxy so in my sender file adapter , i need to configure as such it is should take only one record, from whole file i am using Key field parametrs in FCC but it is taking all the records which is not having the key fields also
please help me
Thanking you
Sridhar2A64310 1 6V83970 03751650016001154000 1 6V9961XT-3 13236157001160
2A64310 1 6V83970 000 1 6V9962XT-3 23236162
2A64730 1 6V83970 03751650016000106000 1 6V9962XT-3 13236162000112
2A64730 1 6V83970 000 1 6V9961XT-3 23236157
2A64741 6V99481 6V83971 4S541403751650016000152360 1 6V9964XT-3 13236168000166
2A64741 6V99471 6V83971 4S5414 000 1 6V9963XT-3 23236167
2A64772 6V99492 6V83982 3S860605001650017000244000 2 6V9965XT-3 13289090000248
2A65690 1 6V97460 07501226872000110000 11242153L&MP 1
2A65690 1 6V97460 000 11242121L&MP 2
EOF
this is sample file , i need to have any one line , cause i need to just trigger a proxy , i am not to going tp take entire file cause in real time i will getting 100 MB file which will be a performance issue -
Sender File Adapter: No Messages
Hi,
I have configured a sender file adapter to read a flat file using file format conversion, in the file poler mode using NFS. I could confirm that the File is being read, and the adapter status from the Adapter framework (is:port/AdapterFramework) indicates the adapter is working fine (Green light, and last message processed at XXX........).
However, I did not find any messages from SXMB_MONI.
Further, I got inot the RWB, and found the following Audit log:
It indicates an error "Transmitting the message to endpoint http://kansbwul01:50000/sap/xi/engine/entry?action=execute using connection AFW failed, due to: Received HTTP response code 404.."
What is the problem, and how can I resolve it?
Thanks
Feroz
Success Channel CDWFileReader: Entire file content converted to XML format
Success Send text file "/tmp/XIDemo/3315-TL-20041126-0000IN.txt", size 164533, character encoding ISO8859-1 with QoS EO
Success Application attempting to send an XI message asynchronously using connection AFW.
Success Trying to put the message into the send queue.
Success Message successfully put into the queue.
Success The application sent the message asynchronously using connection AFW. Returning to application.
Success Confirmation mode test found. File will be resent next time
Success The message was successfully retrieved from the send queue.
Success The message status set to DLNG.
Error Transmitting the message to endpoint http://kansbwul01:50000/sap/xi/engine/entry?action=execute using connection AFW failed, due to: Received HTTP response code 404..
Success The asynchronous message was successfully scheduled to be delivered at Sun Jan 09 19:13:21 CST 2005.
Success The message status set to WAIT.Hi,
Further to my earlier post, the following is the message log from the message monitor. Any clues whats going wrong. Can I configure a File Sender->File Receiver scenario?
Where and how are the port settings and user credentials configured for the AFW.
-Feroz
Message ID f49f6d21-632c-11d9-805a-0003ba54d619
RefToMsg ID
Conversation ID
Sequence Number 0
Message Type Asynchronously Sent Message (SEND)
From Party
From Service Name: LB1_CDWFilePoler
To Party
To Service Name: LB1_CDWFileWriter
Action Namespace: http://erc.ge.com/cdw/poc Name: ReadFile
Connection Name AFW
Status Not Delivered
Profile XI
Transport HTTP
Delivery Semantics Exactly Once
Times Failed 4
Number of Retries 3
Sent / Received 01/10/2005 12:42:33
Transmitted / Delivered 01/10/2005 12:57:33
Next Delivery 01/10/2005 12:57:33
Persist Until 02/09/2005 12:42:33
Valid Until
Retry Interval 5 Minutes
Address http://kansbwul01:50000/sap/xi/engine/entry?action=execute
Credential SAPPasswordCredential(XIAFUSER):password=********:sapclient=100:saplang=
Transport Headers SOAPAction="http://sap.com/xi/XI/Message/30" Content-Type=Multipart/Related; boundary=SAP_63fa9d21-6337-11d9-8f3c-0003ba54d619_END; type="text/xml"; start="" HTTP=POST
Node ID 1485750 -
Sender File Adapter - No error, but not generating any message
I am working on a file to RFC scenario. The sender file adapter is using content conversion to read a comma delimited file. The file is being picked up and archived correctly, and the adapter monitor does not show any errors. However, the process disappears at this point. I don't see any messages in SXMB_MONI, and there is no sign that the process is reaching the RFC adapter. Has anyone ever had this happen before?
I have four line types for Buildings, Additions, Floors, and Rooms.
I list all four in the recordset structure, and I identify a key for each with the keyFieldValue parameter. I list a fieldSeparator of ',' and an endSeparator of 'nl' for each row. And i have a list of the fieldnames in the fieldnames parameter.
The only thing i'm not sure about is the keyFieldinStructure parameter. I have specified ignore there, because I don't want that field in my XML. Do I still need that field in my sender datatype, even if I'm ignoring it, or can I leave it out?
Thanks for any help. Please don't just list blogs unless they have something you think is helpful with my specific problem. I have already read all of the blogs that deal generally with the sender file adapter and file content conversion, and I need more specific help at this point.I made one error before, it IS showing up in the Recovered Adapter Audit Log (it took that log about 10 minutes to open that particular tab so I didn't notice them there).
Here is what it says there:
2006-06-12 11:22:59 Success Channel CC_S_File_FIPM_Buildings: Entire file content converted to XML format
2006-06-12 11:22:59 Warning Channel CC_S_File_FIPM_Buildings: Empty document found. Proceed without sending message
2006-06-12 11:22:59 Success File "/interfaces/one line building.txt" archived after processing
Here are my parameters in the file content conversion:
Buildings.fieldNames RecordType,PLTXT,STORT,STREET,POST_CODE1,CITY1,REGION,PARNR,X_COORD,Y_COORD,ASSIGN_SQ_FT,BLDG_NUM,CAMPUS,GR_SQ_FT,NET_SQ_FT
Buildings.keyFieldValue 'B'
Buildings.fieldSeparator ','
Buildings.endSeparator 'nl'
Buildings.keyFieldInStructure ignore
Additions.fieldNames RecordType,ASSIGN_SQ_FT,BLDG_ABBR,CAMPUS,ADDITION,BLDG_USE,BLDG__NUMBER
Additions.keyFieldValue 'A'
Additions.fieldSeparator ','
Additions.endSeparator 'nl'
Additions.keyFieldInStructure ignore
Floors.fieldNames RecordType,BLDG_ABBR,CAMPUS,ADDITION,FLOOR,ASSIGNABLE_SQUARE_FOOT,BLDG_NUMBER
Floors.keyFieldValue 'F'
Floors.fieldSeparator ','
Floors.endSeparator 'nl'
Floors.keyFieldInStrucutre ignore
Rooms.fieldNames RecordType,SHTXT,MSGRP,ADDITION,ASSIGNED_DEPT,BLDG_ABBV,FLOOR_CAMPUS,AREA,RCD_CODE,DEPT_CODE,BUILDING_NUMBER,ROOM_COMMON_KEY
Rooms.keyFieldValue 'R'
Rooms.fieldSeparator ','
Rooms.endSeparator 'nl'
Rooms.keyFieldInStructure ignore
And here is my data type:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_FIPM_BuildingUpdate xmlns:ns0="urn:XXXXXX:FIPM:Buildings:SYS">
<Buildings>
<PLTXT/>
<STORT/>
<STREET/>
<POST_CODE1/>
<CITY1/>
<REGION/>
<PARNR/>
<X_COORD/>
<Y_COORD/>
<ASSIGN_SQ_FT/>
<BLDG_NUM/>
<CAMPUS/>
<GR_SQ_FT/>
<NET_SQ_FT/>
</Buildings>
<Additions>
<ASSIGN_SQ_FT/>
<BLDG_ABBR/>
<CAMPUS/>
<ADDITION/>
<BLDG_USE/>
<BLDG_NUMBER/>
</Additions>
<Floors>
<BLDG_ABBR/>
<CAMPUS/>
<ADDITION/>
<FLOOR/>
<ASSIGNABLE_SQUARE_FOOT/>
<BLDG_NUMBER/>
</Floors>
<Rooms>
<SHTXT/>
<MSGRP/>
<ADDITION/>
<ASSIGNED_DEPT/>
<BLDG_ABBV/>
<FLOOR/>
<CAMPUS/>
<AREA/>
<RCD_CODE/>
<DEPT_CODE/>
<BUILDING_NUMBER/>
<ROOM_COMMON_KEY/>
</Rooms>
</ns0:MT_FIPM_BuildingUpdate>
I'm going to recheck everything again, but maybe you guys will see something? I don't.
Vanda
Maybe you are looking for
-
Download: http://www.beaugauge.com/download/en/free/BeauGaugeActiveXControls.zip Use circular gauge ActiveX control in your LavView project http://www.beaugauge.com/en/edu036.htm For additional resources, please visit the website. http://www.beaugaug
-
Mod_jk load error with Apache on OS X
Hello - I have been running CF9 on OS X with a MacPorts install of Apache 2.2.21 with no issues as a "standalone" server installation. To get ready for CF10 I have ben trying to get CF10 configured with Apache. The specefic error I am getting when la
-
MRER Error - Maximum number of items in FI reached
Hello Everyone, We have just upgraded our system to ECC 6.0 and we run the automotive extension set. After the upgrade, when running MRER (RMMR1MRR) for a few vendors, we receive the following error message: Maximum number of items in FI reached I'm
-
Posting settled internal order costs to PM Order
Hi, Our client doesn't have PM module upto now. So they posted all the maintenance costs to internal orders. All the internal orders are settled properly. Now they want to implement PM module. They want the costs previously posted in internal order s
-
Af:richtextEditor font-family- adding new font
I am using af:richTextEditor in a web page. The font-family drop down inside af:richTextEditor components contains some font. I want to add some more font (e.g verdana,century etc) in that font-family drop down. Is it possible to add some extra fonts