FCC source file gives error in mapping

While doing File Content Conversion Text to(XML) : Multiple Records occurring in SXMB_MONI and Receiver Channel not working(Mapping Error). Please can anybody tell me how to correct this error or how to proceed.

Hi
can u please provide which FCC parameters u r using at the sender side.
to check ur mapping error just go to the sxmb_moni take the input payload from the moni , copy the payload and then copy that paylod in the test tab in the mesage mapping it will give the error at some node or field level and u will come to know about the error.
if u still face the problem please reply me back.
Thanks
Rinku

Similar Messages

Archive Source Files with Errors

Hi All,
I need to archive my sending file in repective directory, if it has errors..
It is mentioned in library that A permanent error occurs either during the conversion of the file content, or in a module in the module processor.
What is permanent error?
For example if my input file name is abc.txt which containg 3 fields id,name,address.
i have configured sending file adapter with FCC .
now i have given some faulty entries in abc.txt like for example 4 fields separated by comma,
but this is a error.Asper FCC i have given only 3 fields..
so this error file has to archive in so and so folder.
If i check Archive Source Files with Errors parameter in sending file adapter.
and specified the specified directory.
but its not working for me. file is not picking but its not coming in the archive folder.
In library it is mentioned to see message transfer bean link.
there i found Transform.PermanentErrors: True/False.
If we have not used message transfer bean then, in that case will this parameter archive source files with errors will work for FCC?
Please suggest me .
I would really appreciate if anyone could send a complete blog for this how to archive source files with errors in FCC?
Thanks in Advance..
Regards,
Reehan

Reehan,
I am not sure if you are still stuck with your issue of archiving faulty source files but I came across the same issue. Please check your mode of processing. The faulty source files archiving feature will work good in ARCHIVE mode but not in test or delete mode. I haven't check for set for read-only mode.
Good luck!

Archive Source Files with Errors, Option Does not work

Any one tried "Archive Source Files with Errors" on the
sender adapter. It shows no effect.
1.We are on SP19.
2.Adapter type : FTP adapter.
Steps for the Reconstruction
1. Configure a sender FTP adapter.
2. choose the option "Archive Faulty source files"
3. Specify a directory for "Directory for archiving Files with Erroors"
4. Send a file which can cause File Content conversion errors.
Regards,
Raj

Hi,
FYI
I am in PI 7.0 SP 10. It works fine for me. Whenever you have any content conversion problem or module problem, it has created the same input file in specified directory.
In your case are u getting content conversion error in the Communication Channel ..just cross check it. If not try to get error over there and then test this feature
Rgds,
Moorthy

Use of "Archive Source Files with Errors" for BIC module error

Hi All,
I have Edi file to Idoc scenario , where i am using SEEBURGER BICXIADAPTER.MODULE.
My question is if the input file caught in error with BIC Module e.g
"MP: exception caught with cause Error in BICMODULE-module:Temporary error: BIC XI Adapter call failed. Reason: SegmentDescription: checkAndResetChildrenCounter() not enough repetitions of the segment UNH found: 0 instead of 1 offset :80 DESCRIPTION: SegmentDescription Warning: Not enough repetitions of the segment UNH ([not specified]/[not specified])."
can we move these errornous files to another directory using Processing parameter "Archive Source Files with Errors" available with Sender File Adapter?
In File Adpater my Module tab looks like :
1 localejbs/CallBicXIRaBean Local Enterprise Bean bic
2 localejbs/CallSapAdapter Local Enterprise Bean 0
In my scenario , its not working.. do we have any other option to achive this?

Hi Jyoti,
I had a raised a similar case with SAP and came to know that archiving only works if the error raised by the module is so called "Permanent". However, bic doesn't raise permanent error due to which archiving of error files won't be possible. Seeburger haven't came up with a solution yet.
Regards,
Prateek

"Archive Source Files with Errors" feature - how to?

File sender adapter has a feature to Archive Source Files with Errors.
I have an adapter module applied to inbound files and in case an error occurs during the processing of the adapter module, I want to make use of this feature , this is because the CC keeps on picking the file with erroneous data after regular specified interval and shows up an error in RWB.
How can I use the Archive Source Files with Errors feature with this? Do I have to do anything specific in the adapter module code for this to work?
Regards,
Amol

Hi,
if you see whats mentioned on the help link
http://help.sap.com/saphelp_nw04/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/frameset.htm
it says:
To archive source files where a permanent error occurred during processing, set the indicator.
A permanent error occurs either during the conversion of the file content, or in a module in the module processor.
does this not mean it could be used with errors raised in adapter modules? ideally it should be.

Source file read error for sqldeveloper

While downloading SQLDeveloper, after almost 70%complete, i got an source file read error.
i've tried again to download but the page hangs on the license agreement page after clicking I ACCEPT.
Please resolve this issue.
Thanks in Advance
Using:
MS Win XP Home
Firefox 1.5.3
Tony Garabedian

sybrand_b wrote:
Why are you assuming utl_file works with binary files? It doesn't!It does in 10g, where file open mode B was introduced. But even with R mode you should be able to open DOC file. You might (or might not) have problem reading it:
SQL> declare
2      fh UTL_FILE.FILE_TYPE;
3      input_buffer varchar2(4000);
4 begin
5      fh := UTL_FILE.FOPEN('TEMP','Stats.doc','r');
6      UTL_FILE.GET_LINE(fh,input_buffer,4000);
7      DBMS_OUTPUT.PUT_LINE(input_buffer);
8      UTL_FILE.FCLOSE(fh);
9    exception
10      when others then UTL_FILE.FCLOSE(fh);
11 end;
12 /
ÐÏà¡±á                > þÿ                 2          4      þÿÿÿ    1
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿì¥Á €    ð¿             ¸
PL/SQL procedure successfully completed.
SQL> SY.

File Adapter - Archive Source Files with Errors.

Hi All,
Could you kindly give the steps as to how to configure sender File Adapter to archive source file which result in error ?.
Cheers,
Kushi

Hi Kushi,
To configure Sender File Adapter what you can do is:
1. Create one Communication and select the adapter as File.
2. Select the radio button Sender.
3. Enter the source directory e.g. /temp
4.Enter File name e.g. xi_test.xml
5. Under Processing parameters Chose the processing mode as "Archive" from
drop down box.
6. Enter the path where you wnant to archive your file.
7. Do not forget to enter the poll intervells. e.g. 60 & Quailty of service "Exactly Once".
8. Enter file type "Binary" if your source file is XML.
9. Check if Adapter status as "Active".
Note: Archiving the file is regardless of erorr in file.
It will archive all the source file.
Regards,
Sarvesh
****Reward Points, if found helpfull.

How to Archive Source Files with error in XI ?

Hi,
How to archive source files where a permanent error occurred duing processing? and how to set it?
Thank you in advance.
Yinglak

Hi,
What exactly u want to do.........If u want to Archive ur sender file then give Archive directory path and if u process the file with error data or success data it will store in Archive directory.
Archive Directory is used to store the sender files what ever data ur sending ........not for only error records.
Regards,
Phani
Reward points if Helpfull

** How to get Source File Name thru XSLT Mapping

Hi friends,
We require source file name after message processing (SXMB_MONI) in the output structure. We understad from Forums and blog 2664, this is possible thru UDF - DynamicConfiguration class. This UDF will work if we use message mapping. But, in our case we are using XSLT mapping. So, how do we call the same from Java Pacakage ? (Imported Archives). For writing java class separately, what are the changes to be made in the program?
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
Kindly reply, friends.
Kind Regards,
Jeg P.

Hi,
This is the example in this similar manner u have to call the method in which u have to write the code for picking the source file name.
<name>
 <xsl:if test="function-available('javamap:concat')">
 <xsl:value-of select="javamap:concat($first, $last, $inputparam)"/>
 </xsl:if>
</name>
for reference check the Link,
http://help.sap.com/saphelp_nw04s/helpdata/en/73/f61eea1741453eb8f794e150067930/frameset.htm
Regards,
Phani

Determine Target directory from Source file names with out mapping

Hi All,
I have a requirement to determine the Target Directories from the Source file names.
File Sender Adapter - XI - File Receiver Adapter
In this scenario I am not doing any mapping. Source File directory contain 3 files. These file should go to 3 directories in the Target Server.
Please help me how can meet this requirement
Thanks in advance
Kevin

Hi Kevin,
if you can separate the files by name. have 3 sender communication channels each picking up one of the files (you do this by making the regex in the file name mutually exclusive) and then send them all to the target system using the same comm. channel.
regards,
Horia

UTF8 source files course errors

I have source files encoded as UTF8 which compile and run fine, however JavaDoc is not happy about it. I've used:
javadoc -encoding "UTF8" -charset "UTF8" -docencoding "UTF8" myPackage
What's the correct way?

You might try spelling it with a dash "UTF-8".
I believe UTF-8 is an encoding, not a character set, so you
would use:
javadoc -encoding "UTF-8"
You would use -docencoding if you want the HTML files to
also be in UTF-8.
Please let us know how this works.
-Doug Kramer
Javadoc team

Disk utility gives "Error: Partition map repair failed while adjusting structures to fit current whole disk size"

I am getting the following error when running Disk Utility (under ML) on an exteral USB hard drive:
Error: Partition map repair failed while adjusting structures to fit current whole disk size.
I get thsi when I ask Disk Utility to "Repair Disk" at the top level of the disk hierarchy (i.e. not on one of the partitions within the disk but on the disk itself). I was not getting this error with Lion on the same disk before I upgraded from Lion to ML.
It seems like a bug in ML. I found websites where they suggest that you just run Lion's Disk Utility and it will show the disk to be fine.
Any thoughts?

So, I finally seemed to have resolved things with the Seagate 4TB Firewire external drive. If you Google about, you will find a thread on Seagate's own support forum that describes how to disable the sleep function on the drive. You CANNOT ALLOW THE DRIVE TO SLEEP WHILE CONNECTED TO YOUR MAC.
After a lot of reading, here's what I think is happening: the drive goes to sleep, after some period of inactivity, and when you shutdown your Mac, OS X tries to write something to the drive as part of the dismount / disconnect / shutdown process. That fails in some manner, leaving the drive 'corrupted' at the filesystem or partition level.
Then, on the next boot-up, Mountain Lion tells you that it cannot repair the drive and it mounts as read only. Your only fix at that point is to re-partition / re-format and start over (which is big fun with 3TB of data to copy back on to the drive).
If you prevent the drive from sleeping, whenever it's connected to the MacBook, then the above process doesn't occur and voila, the drive just works. So far, I haven't had any problems with about a week of starting / shutting down my MacBook connected to the offending drive (translation: I was going to return the drive, but the problem is clearly with Mac OS X Mountain Lion).

Default extension of source file in sql loader map

Hi
I created a map having a flat file as source. The file name is X. When Ran the map, these was error message said that 'Cannot find file X.dat'
Is the '.dat' a default extension when no extension is defined?
Thank you
Sozy

>
Is the '.dat' a default extension when no extension is defined?
Yes

Quicktime won't open files; gives Error -43 message.

Whenever I try to open file with quicktime I get an error message reading: "Error -43: a file could not be found (files name)" I have tried re-installing and repairing quicktime. Any suggestions? I am runnig windows Vista.

I've expierenced error 43 in the past myself and the only two things that I was aware of that caused it, was having a drive named in a way QT could not recognize, or the number of characters in a file name being limited to 21 or less.
I have never used Adobe Premiere so have no info on that.
But where you indicate a administrator issue which is related to permissions. This link may give you some info on how to navigate Windows permissions. It is in XP but you can look up for whatever OS is on the computer.
http://support.microsoft.com/kb/308421

Batch file gives error "is not recognized as internal command.." after first character

For every batch file I create, I receive the same error displaying after only running the first character in the file: ' d' is not recognized as an internal or external command, operable command or batch file.
This occurs whether I run 'dir' cd '../..' or java.exe
I've confirmed the path environment variable has the correct paths, cmd.exe is assigned to comspec, I'm running as admin, etc. What have I not setup correctly to run batch files. I can run these same commands directly at the command line.
I'm running the latest version of 8.1, on Toshiba Satellite C855

We do not have access to your computer, we cannot read your mind, and we cannot see your screen.
Please copy and paste the exact command you are using and also copy and paste the
exact error message.
-- Bill Stewart [Bill_Stewart]

FCC source file gives error in mapping

Similar Messages

Maybe you are looking for