FCE 3.5.1 Mac Pro and Panasonic NV-GS200
FCE 3.5.1 HD hangs when I start up with my Panasonic NV-GS200 camcorder connect via firewire. I have tried firewire DV PAL, Firewire basic PAL etc with no effect. FCE will only load if I turn off the camcorder. iMovie '08 stops at the blue importing video screen if it recognises the camera and iChat AV 4.0.2 does not recognise the camera or freezes. My OS 10.5.2 is fairly vanilla with all the recommended updates from Apple. Quicktime is up to date as is Flip4Mac WMV. The only other firewire device connected is an external HDD but both powering down and disconnecting the device has no impact. I have used a couple of different firewire cables, used the front firewire port, the back port and the port on my 20" Apple Cinema Display. I have an early (2006) Mac Pro 2 x 2.66GHz dual-core Intel Xeon with 2 GB RAM and 3 x 500GB internal HDD and ATI Radeon X1900XT.
The camcorder works fine with iMovie '08 on my new MacBook Pro 2.6GHz (Nov 2007) and on an old 1.25GHz eMac running 10.4.11. I can capture video if I boot into MS Vista under Boot Camp on my Mac Pro using MovieMaker.
This is very frustrating. The camera and cable combination works well on every machine I have tested except my Mac Pro under 10.5.2. The camera had worked previously on the machine under Tiger but I haven't used FCE for the last 8-12 months. A google search indicates sporadic mention of similar issues but with no solutions. I would appreciate any help if someone has resolved this issue.
NO ANSWERS - Just a few thoughts.
It appears from what you say that there is either a problem with your Mac or more likely with some of the updates you have done recently, rather than the camera.
Over the last year certain QT updates have caused FCE problems, though I haven't heard of iMovie being similarly affected.
Could you install FCE on your MBP and try that ? If your MBP has identical updates it will probably show the same problem, but if it did work it might give a few more clues.
Also would it be possible to try another camera just to rule out that it is not your Panasonic that is at fault?
If anyone else has any positive ideas please chime in !
Similar Messages
-
Have just got a Mac Pro (and am also new to Macs). I have a two year old Panasonic NV-GS15 digital video camera attached via firewire, I can't pick up the camera at all...in i-movie, Final Cut Pro (5.1) or even see it when looking under the firewire port. Have been on Panasonic website and the driver information I found was related to PC/Windows. Have emailed Panasonic but they aren't replying.
Any suggestions/answers/wishes of luck?
Mac Pro Mac OS X (10.4.7) 2 x 2.66 Dual Core Intel Xeon, 2GB 667 MHzI have same problem with Mac Pro and Panasonic PV-GS120. I went to Apple store and tried Mac Pros over there and they all had the problem. PowerBooks (G4 and Intel) as well as iMacs can all see the camcoder fine and iMovie imports clips without problems. System Profiler does not show any FireWire devices once the camcoder is attached Mac Pro and /var/log/system.log reports that FireWire has been reset multiple times in the last minute. I've filled in the form to escalate issue to Apple but I have no idea when the issues is going to be addressed.
Mac Pro Mac OS X (10.4.7) -
Can I download FCE 4 onto my macbook pro and imac?
Can I download FCE 4 onto my macbook pro and imac? I have it on the macbook pro already and want to put it on my new mac, can it be done?
Can I download FCE 4 onto my macbook pro and imac?
Yes, you can install it on both. You can't have it running on both computers at once unless you have two licenses for it.
(38491) -
" help me please" I have Windows 7 32 bit installed on my mac pro and Bought Mini DisplayPort to VGA Adapter to connect to lcd tv But it does not work? why? please help me
I have to boot with a Windows
When I use the Mac operating system not have a problem and DisplayPort to VGA Adapter Working properly
why does not work with windows ?
What should I do؟
I'm grateful to give advice
tanks
[email protected]Someone in another section answered this. Thanks.
-
I have photoshop C6 on my MAC Pro and want to install it on my new MAC desktop. I sent the files with AirDrop but photoshop wont open I get an error message that it cant find the Library. Any thoughts?
download the installation files and install using your serial number or adobe id,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5.4 (win), 5.4 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
I have mac pro and firefox 3.0.19
I am trying to download a video from youtube.?
I can see the video. I want to download it and save in my computer to see it again.
I have download helper. While the 3 red,blue,and yellow sphere are turning, It gives me the choice of place to save,and when I click and choose desktop , for example, this message comes ."Conversion requires an external application that appears to be missing on your system. Configure conversion ?
When I click on okay, another page comes, which says" converter and a box next to it . in the box is written FFMpeg. but I can change it to MEncoder. In another box, says configure conversion rules. When I click on it, nothing happen.Thanks for your help.
== This happened ==
Every time Firefox opened
== I want to download a video from youtubeNo, this reply is not helpful. It simply generates this little gem:
"This service requires the conversion feature to be enabled.
Configure conversion ?"
And the same clicking on buttons that makes nothing happen and going around in circles with the escape key. -
i have a long-existing iPhone 4s with one apple id and started a job where I received a macbook with another apple id. how do i get my phone to sync with the Mac Pro and secondly how do i get my music on there?
No not bothered about sycing apps etc it is all about calendars and maybe notes. IN terms of how its done I just want it the easiest way and preferably so that if an entry is made on one calendar then it populates the other.
Thgius is beacuse I have my work diary on outlok, which I then link with my ical. I want to make sure that information is then shared with her.
Chris -
My 5yr old iMac will not connect to the Internet. All other computers at home will, including my Mac Pro and iPad. I'm at my wits end. What should I do?
Which OS are you using (update your user profile).Try a
SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
The 5 second timing is important to a successful reset. -
IPhone not showing in iTunes on Mac Pro, and BLOWS keyboard on two Macs!
I have an extremely annoying issue since I upgraded my original iPhone to 2.0 and 2.1:
- I've got an iPhone (8GB, first gen) with 2.1 firmware
- Mac Pro early 2008
- Aluminium Keyboard (standard)
- iTunes 8
Whenever I attach my iPhone, the keyboard goes dead. Totally. Only way to re-animate it is by unplugging the iPhone and wait 5 seconds, then re-plug the keyboard. This is on a newly created Admin account on the Mac Pro and the iPhone that has been through a total factory reset back to 2.1 today...
And a newly re-installed iTunes 8 on (all computers).
Note my iPhone is no longer recognized in iPhoto or Aperture or iTunes on the Mac Pro either.
However, the iPhone works fine on a Mac Book Pro (newest model).
It does show up and sync on an iMac Intel 2.0 GHy, but kicks the Aluminum keyboard on that machine as well...
What is going on??
I will have to double-post this in iTunes and iPhone section, apologies in advance, but this is just too ridiculous... someone must have an answer to this. At least an explanation. I have been through every single USB port on my Mac Pro.
Apple "Genius" in Apple Store Regent Street recommended an archive & install of Leopard 10.5.x. Yeah right. I am working on this machine, I have not got time for that silly idea...
The thing is, this all worked fine before the 2.0/2.1 update... but why is the bl oo dy thing working on a new MacBook Pro and not on my Mac Pro?// Apologies for cross-posting this in three threads, but as it - at least for myself - provided an instant solution to a nagging problem, it should be alright. //
Alrighty, here we go - today I FINALLY made successful progress WITHOUT having to re-install my entire system...
I figured it was very weird that my iPod Mini would work fine on my Mac Pro USB ports, as all other small devices did too, but that the iPhone (first gen) would simply not trigger any reaction whatsoever.
The iPhone could be ruled out from being the funny one as it was instantly recognized on Macs in the Apple Shop. As I really did not feel I had time to archive & install and whatnot on my work machine, and the fact that I always thought my Mac Pro should have a few more (USB) ports, I researched suitable internal USB expansion boards.
After reading up about it, I decided to get this one: *Sonnet Allegro Express USB* - this card installs in seconds - you simply sht down your Mac Pro, pull the mains plug, take off the side door, unscrew the two thumbscrews holding the blind plates towards the back, take out one of the blinds, push the card in carefully but all the way in, re-attach the blind-holding plate and fire up your machine.
I plugged my regular iPhone dock into the back, pushed in my iPhone, and was instantly greeted by the short humming of the iPhone! Starting iTunes, the iPhone popped up in the side bar again - my precious iPhone is back alive and happy to sync contents!
Very happy to finally have found a solution.
If anyone tries this, I really hope it works as good for you as it did for me - if it doesn't, then for about $50 you've at least got those extra four USB ports on the back of your Mac Pro you always wanted
Good luck! -
I have moved from a G5 Powermac to an Intel Mac Pro and selectively porting over items from a backup hard drive.
How can I access and use documents and drawings created on the PC based computer ?Clarisworks, you need Appleworks, which will only work with Mac OS X10.6.8 or earlier. See this tip if you must go newer. Mac Pros with newer hardware configuration than July 20, 2011 can't use Mac OS X 10.6.8 or earlier without this tip and then it would be Mac OS X Server. I'm not sure if the new black Mac Pro supports that configuration or not.
iPhoto, there is an iPhoto for all versions of Mac OS X.
iTunes, there is an iTunes for all versions of Mac OS X. Note with iTunes versions 11 and later, which are needed for syncing with iOS 7 or or later, you will lose coverflow, if you liked that feature. Sadly you can't run an older version of iTunes from within Mac OS X 10.9 or later.
Sketchup: http://help.sketchup.com/en/article/60107 shows the versions that will work with intermediate Mac OS X versions, and this shows the latest version: http://help.sketchup.com/en/article/36208 be sure to click on the operating system you choose to use.
GIF - Viewing GIFs Apple's Preview can do that. Editing them, I like http://www.lemkesoft.com/ Graphicconverter.
DMG is able to be opened by all versions of Mac OS X. This are just "disk images" which store programs on a virtual disk that will open when double clicked. Frequently you'll find the installer of the said program inside. To find out if the program itself is compatible with 10.7 through 10.9, see http://www.roaringapps.com/
Otherwise see the resources on:
https://discussions.apple.com/docs/DOC-2455
If you end up deciding to stick with Snow Leopard. -
I have used my older Mac Pro and now my new 2011 iMac fo play the many movies and TV shows I have dowloaded. Great results.
But I also have a lot of Blu Ray disks.
I am going to load windows 7 via Boot Camp for other reasns. After that is done, and even with an external Blu Ray player, is it still not possible to play Blu ray movies?
Thanks for your consideration.....I have used my older Mac Pro and now my new 2011 iMac fo play the many movies and TV shows I have dowloaded. Great results.
But I also have a lot of Blu Ray disks.
I am going to load windows 7 via Boot Camp for other reasns. After that is done, and even with an external Blu Ray player, is it still not possible to play Blu ray movies?
Thanks for your consideration..... -
i install windows 7 on my mac pro. and participate in windows 7 to 50gb 2 disk. but now i cannot enter my mac. only windows is appearing what should i do. when try enter my mac want me to format rest of the disk. how can i reinstall my mac?
If you use Windows program to partition the Hard Drive, the Apple partition gets destroyed.
Windows does not understand it is a guest on your Mac, and throws garabge wherever it pleases. -
I had an HP laptop. Just bought a Mac Pro and want to get my music and photos moved over. Can't I just open my I tunes in my new laptop and then connect my Iphone or I pod and sync my music into my I tunes?
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
-
I just replaced the hard drive for my Mac Pro, and I am trying to restore what is on my Time Capsule, but it wont connect, and only is giving me the pinwheel of death. What do i do?
You will need to boot from some alternate boot device to accomplish this, if you did not initialize the drive before installing it.
If you have another Mac, you may be able to use FireWire target disk mode.
If your MacBook has a DVD reader and you have a Mac OS X Installer/Utilities DVD, such as the one that shipped with it, you can boot from that DVD, answer only the "what Language" question, and wait a quarter minute for the MenuBar to be drawn. Then examine the Utilities menu or the Installer menu and Find Disk Utility. -
Cannot Complete Installation of Vista with Mac Pro and Boot Camp
I only have one hard drive with my Mac Pro, and I partitioned the drive into two sections with boot camp and restarted with my Vista 64 bit Ultimate CD.
I have tried formatting the partition with Vista and it still gives me the dreaded error message of "windows is unable to find a system volume that meets its criteria". I've tried deleting the partition during installation, and making a new partition with Vista, reformatting, then restarting the computer. Same message.
I don't know what to do. I've tried like mad searching for topics like this one here, but every one of them deals with installing vista on a second dedicated hard drive on the Mac Pro. I only have one. How do I get this to work?
Please help if you can. I would REALLY appreciate it. I'll be watching the thread. Thank you!!Loyalty4Life wrote:
Thank you for your reply! I'll be here all night.
I have the 3GHz Dual-Core Intel Xeon processors. I tried installing Vista ultimate with my 32 bit software, but I still get the same message (I own both legally, btw).
Thanks for your help.
Several things to do:
Run OS-X Disk utility and repair the disk if necessary, and file permissions.
Be sure your HD has the GUID partition scheme and if it has SMART that it's OK
Zap the PRAM
Be sure you are logged in as administrator when creating the BC partition and starting the installation of Windows from Leopard
When I installed Vista Ultimate 64-bit, I was using BootCamp beta, 1.2 or 1.3. I created the partition with BootCamp Assistant.app as you did. It's a 60GB partition that I formatted with NTFS with BC.
After starting the install in Tiger, I then simply inserted the Vista 64-bit DVD and that was it.
It just installed.
Ditto with XP-Pro on my other MBP. Zero problems with BC. It was also done with a beta, BC1.0.
I have never installed Windows using Leopard. When I updated to Leopard from Tiger nothing changed, but there seem to be more problems with Leopard and BC2.0 than there were with Tiger and the beta versions.
There are no requirements about legality until after the OS is installed, so that's a moot point.
There are some install DVDs that are in ISO format and they won't work, but it seems that yours is working but not finding a suitable volume.
You might try reformatting the BC partition with BootCamp assistant as FAt32 and seeing if that works, but you are limited to 32GB if you do that, but it would be a good test. Vista should then format it into NTFS.
Be sure that your Leopard OS is fully backed up because stuff happens when you keep fooling around with partitions.
Also look through this forum for similar problems.
Maybe you are looking for
-
How I can synchronize my Mail Accounts in Windows Live Mail with iOS?
I want to synchronize my Mail Accounts with password from Windows Live Mail to my iphone on iOS. How I can do that?
-
How do i simulate a digital instrument using FP
Hi I am a new user of LabView and need to construct an application to verify the operation of data logger programs. I need simulate data from various analogue and digital instruments using standard test data from a spreadsheet. I have just about fi
-
My printer will not print in black even though i put in a new black ink cartridge.
my printer will only print things in color. Black print will not show up at all or only very faintly. I installed a new HP cartridge.
-
How set up multiple homepages to open in a separate window (not a tab) when desired...
I would like to setup and be able to click on a Firefox profile (I assume profile) or pass parameters to the firefox.exe and have firefox open about 6 separate windows (not tabs) set to different home pages. If I use the Pipe Symbol in Options, it wi
-
Screen variants--screen number and program
Hi, I am a functional consultant and not familiar with coding/development.I needed some help with regards to creating a screen variant. -->In which scenarios can one use a screen variant? -->How do we find the screen number and program?I checked the'