FCE 3.5 Audio Meter Link to Frame Forward

I was watching a tutorial on FCE 4.0 and noticed that the audio meter changed as the arrow keys were used in viewer to move one frame forward or backward. Does this feature exist in 3.5? I'm unable to activate it. The audio meter works when I play a clip but not when moving frame by frame.

Turn on Audio Scrubbing in the View menu.
-DH

Similar Messages

AHH! FLOATING AUDIO METER FAILS TO REGISTER EACH FRAME'S LEVEL!

I have a problem regarding the floating audio meter - ie, the small 2 track meter that usually sits next to the tools strip in the standard window setup. For some reason, when I scroll along clips in my timeline (using the left/right arrow keys) it doesnt show the levels of each individual frame, nor does it produce the sound that should be heard from that specific frame. This is a huge problem for me, as I am trying hard to sync up clips to music, and I am now stuck with just guessing where I should cut it based on intuition. Also, along with the floating audio meter, the actual audio mixer doesn't register the levels either when trying to move frame by frame. I must make it clear that when in preview(play) mode, the audio does register and can be seen moving along with the sounds produced, but when i press space(stop) it(the level of audio) simply stays put, and does NOT change from the time that I last stopped playing the sequence.
If I am being to confusing, I am trying to be able to (while moving frame by frame with the arrow keys) see and literally hear each individual frame in efforts to make synchronizing a **** of a lot easier and more practical.
This has never been a problem before, and has just recently burdened me. I have tried restarting the settings/preferences, starting new projects, looking in the manual, etc. No dice. Can someone please help me restore FCP's ability to hear each frames audible material, as well as witness each specific decibel level of the individual frames as I arrow across?

Well...
if you make sure scrubbing is on, that would help.
You can also turn on the waveforms in the timeline tracks.
That should help too.

How can I delete the video and keep the Audio in a few frames using Imovie 11

How can I delete the video and keep the Audio in a few frames using Imovie 11?

I've met the problem too before. but i solved it with Audio Converter Mac instead of iMovie. If you have similar situation that just want to keep audio but not video, and if your file format is not workable in iMovie, you can use the Audio Converter for help too. it can easily help to extract audio soundtrack from any video format. Or if you need to convert one audio format to another, it is a good choice too, because it supports many common audio output formats.
<Link Edited By Host>

What's wrong with the audio meter?

Let me start off by saying that I know the problem I am going to report is a little bit complicated, if my limited grasp of English makes it even harder to understand, please let me know. I'll elaborate on it further.
At first, I was very happy with the CS6 because the audeo meter at the bottom right can show the volume of video EVEN WHEN i scrub through the clip in the viewer monitor. It is vital to me,because I am so used to editing based on the fluctuance of volume as I edited on FCP .However, I find the audio meter in premiere pro is kind of wonky. when I press left arrow or right arrow to move frame by frame, the the audio meter acts very strangely...I am not sure how to discribe it in words, but I'll give it a try here:
In FCP 7,the audio meter shows the volume in a very simple way: when I play the video frame by frame, the audio meter fluctuate correspondingly, to show the volume of that individual frame.
In PP, when I try to play frame by frame, the audio meter gives no reaction in the first couple of frames, then fluctuate . The most mind boggling thing is that when I stop playing the clip, instead of staying as the volume of the frame where I stop (as FCP does), the audio meter in PP slowly falls down to nothing. What gives? Can I have an audio meter in PP acting just like the one in FCP? Can anyone give me a hint of what's going on here? Thank you in advance!!

if you want the peaks to stay, right click on the audio meter and choose static peaks.
Todd recorded a great video about the audio meter and mixer here:
http://www.video2brain.com/en/lessons/changes-to-the-audio-mixer-and-audio-meters-panels
this migh help.
as for the meter not moving the first few frames, i think, i can't help you.
and keep smiling

Connection betw. Sound Pref/VoiceOver Level/Floating Audio Meter

In working with the Voice Over tool, and trying to get my levels right, a few questions came up:
1. Do the settings in Apple Pref > Sound > Input need to be checked/verified each time a recording is made? (They seem to be reverting to some default setting on my system between recordings.)
2. How do the "Input volume" and "Input level" in Apple Pref > Sound > Input affect the "Level" in the "Input" section of the Voice Over Tool, and FCE's general "Floating Audio Meter"?
3. What's the relationship between the "Level" meter bar in the Voice Over Tool Bench and FCE's general Floating Audo Meter?
4. In the Voice Over Tool under "Headphones": How does headphone volume/db affect overall levels/mix?
*Thanks for helping me get a consolidated view on how these elements interact.*

Well...
if you make sure scrubbing is on, that would help.
You can also turn on the waveforms in the timeline tracks.
That should help too.

Audio Meter Issue

I'm having an interesting audio meter problem. Working on a DVCAM project in 6.0.2. Audio is captured as mono tracks. The audio meter doesn't show separate levels for channels 1 and 2. If I make the clip a linked stereo it show separate levels. When I remove the linked stereo and go back to mono the levels stay separated. I changed the sequence output to dual mono and it seems to have solved the problem but I think I may be missing a setting for the normal audio channel monitoring. Any ideas?

Source meters on the audio mixer read independent levels. It's the timeline meter that doesn't. I always thought it was a source reference.

How to link text frames in Pages 5.2?

How to link text frames in Pages 5.2?

The correct term in Pages is Text Boxes, and true linking is not implemented in v5.2. You can Unite, Intersect, Subtract, and Exclude multiple Text Boxes via the Arrange panel. These attributes only appear when two or more Text Boxes are selected. Also, on the Arrange menu, you will need Object Placement set to Move with Text, and the Text Wrap set to None for more accurate positioning.
In the following example, there was initially a Text Box with overflowing text that was duplicated. With both Text Boxes selected and aligned, I could then use the Unite feature from the Arrange panel. This allowed the text to flow into the second box. Selecting text in one box and dragging upwards continues the text selection between both boxes. Hoefler italic applied in one box is applied to both. Appropriately placed, another trip to the Arrange panel to enable Text Wrap around and text fit adjustments.

I am using ALSA and Icecat. When I play any html5 audio/video it works, but the next time i click on another audio/video link I lose sound.

I am using Parabola (a fork of archlinux), Icecat 31.4 and ALSA
Icecat and firefox seem to hold onto the soundcard when I click on a new html5 audio/video link in the same tab. The next video/audio element loses sound. If I wait 10 seconds and click back to the start of the audio/video, the audio returns. I often get cpu spikes for icecat when it happens.
I have tried this with both motherboard and usb sound and I get the same problem. I have disabled extensions (addons) in Icecat, deleted profiles, reinstalled the browser and even installed firefox from the AUR and it still occurs.
I have disable gstreamer in about:config and restarted and it still occurs.
My .asoundrc is this:
pcm.!default {
type plug
slave.pcm "hw:0,0"
All my other audio applications work. I have noticed that if I use pulseaudio it fixes it, but it should work without anyway, like it used to. I think something happened after an update, but I'm not sure.
Any help would be appreciated. I know it's not a big problem, but it's really frustrating and I've had it for ages. I even switched browsers to get away from it.

*nerding out*
I am not an expert in this and if we get stuck I have found a mailing list for the alsa project that can be contacted: http://www.alsa-project.org/main/index.php/Mailing-lists
Gstreamer is disabled in Firefox as well as the os?
Since you are seeing issues with ogg files and moving video/audio combination I started to dig into file formats {sox http://sox.sourceforge.net/soxformat.html}
For ogg would the file format affect the "raw"?
defaults.pcm.file_format "raw"
Updated libraries
alsa-lib-1.0.6-8.FC3
alsa-utils-1.0.6-3
No no, here:
http://oss.sgi.com/LDP/LDP/linuxcookbook/html/cookbook_27.html#SEC377
Is the OGG cpu intensive for your alsa architecture? [http://alsa.opensrc.org/Ogg]
Troubleshooting sound on Linux to narrow down the issue: [http://www.troubleshooters.com/linux/sound/sound_troubleshooting.htm#the_steve_litt_diagnostic_tools]
References: [http://www.alsa-project.org/main/index.php/Minivosc]
[http://www.troubleshooters.com/linux/sound/sound_troubleshooting.htm#the_steve_litt_diagnostic_tools]
I am sorry, this is where I can no longer help. Please seek the guidance of the Linux forums or that alsa mailing list.

Selection text frame in linked text frame remove

I chose in the text frame the linked text frames
get out of text and I want to delete a text frame
Is it possible that a command letter
same thing selecting the external can

Ok. Try now,
var doc = app.activeDocument;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "~a";
var found = app.selection[0].findGrep();
for(var i =found.length-1;i>=0;i--)
        var ip = found[i].insertionPoints[0];
        if(found[i].allPageItems[0] instanceof TextFrame)
                var cont = found[i].allPageItems[0].texts[0].duplicate(LocationOptions.AFTER,ip);
                found[i].remove();
Regards,
Chinna

Dynamic Text box with linking to frames

I have a problem. I've tried everything I can think of and what I have Googled, but nothing has helped. I have a scrolling dynamic text box and I need some words in that text box to link to frames, like buttons (Not a URL). This is the file and the frame I'm on is "conflictNorthernPlains" https://dl.dropbox.com/u/72608572/civilWarEra7.zip
Thanks

use:
var tf:TextField = new TextField();
addChild(tf);
tf.htmlText = "<a href='event:frame1'>link to frame1</a><br/>";
tf.htmlText += "<a href='event:frame2'>link to frame2</a><br/>";
tf.addEventListener(TextEvent.LINK, tfF);
function tfF(e:TextEvent):void{
gotoAndStop(e.text);
p.s. please mark helpful/correct responses, if there are any.

XML configuration file to link to frames in Flash - As2.0

How can I set the url or link attribute from the XML configuration file to link to frames in my movie instead opening a HTML page? I am using Actionscript 2.0
Thank you.

What type of file is using this xml data? If it is being read by the AS2 file, then your data should resemble either frame labels or frame numbers.

Lining up text in linking text frames

I've inherited a document design from an agency that my client sometimes uses - the client can't get their hands on the original files so I've recreated from a PDF. I can't replicate how they make text line up across a page through linking text frames.
The majority of their text frames have VertJustification set to Bottom, so I'm setting that as Default for my text frames. But when I put dummy text in to my frames, I get very bad alignment of lines - especially at the top - when there is a different number of paras in each frame.
Design agency PDF http://dl.dropbox.com/u/4460087/designagencytext.png
My InDesign setup http://dl.dropbox.com/u/4460087/mytextsetup.png
Current text
9pt text
14pt leading
2mm (5.9pt) space after each para
Given their text set up - especially the 2mm space after each para - they must be doing some adjustment and balancing after the text is added. I'm just not sure how.
Any clues??

Assumption simply based on the fact that they seem to line up more often at the bottom through 80 pages of this stuff rather than at the top.
But I think you've hit the nail on the head for me. Setting my frames VertJust to 'Justify' helps me do replicate their style quite easily.
And agreed, I also think the visual distraction of lines not lining up across columns is worse than having columns line up at the bottom.
Thanks for the help.

Link to frame label instead of frame #?

How do I modify the following code to link to a label instead
of a frame #?
Btn1.addEventListener(MouseEvent.CLICK, buttonClick1);
function buttonClick1(event:MouseEvent):void{
gotoAndStop(30);
Thanks!!!

1. Is there a reason why I would use the second segment of
code vs. the
first one?
2. It seems to me that it would make sense to always link to
frame
labels vs. frame numbers in case you choose to move items
around in your
timeline. Is there any reason to not use frame labels vs.
frame numbers?
Thanks!!!!
kglad wrote:
> no. if the frame label is "contact" you would use:
>
>
>
> Btn1.addEventListener(MouseEvent.CLICK, buttonClick1);
> function buttonClick1(event:MouseEvent):void{
> gotoAndStop("contact");
> };
>
> // or
>
> var frameLabel:String = "contact";
>
> Btn1.addEventListener(MouseEvent.CLICK, buttonClick1);
> function buttonClick1(event:MouseEvent):void{
> gotoAndStop(frameLabel);
> };
>

Select all Linked Text Frames

Dear All,
My Request:
1. Is it possible to select all linked text frames of my selecting text frame (Please refer attachment)
2. Suppose If we select all text frames, is it possible to fix height for all text frames like as 3p or 4p etc....
Trying script for select all linked text frames:
if (app.selection[0].nextTextFrame == null)
   if (app.selection[0].previousTextFrame != null)
        alert("pass")
        app.select(previousTextFrame.parent) && app.select(nextTextFrame.parent) && app.select(startTextFrame.parent)
Could you anyone give solution for my request.
Thanks in advance
Beginner

Hi All,
If I select any text frame, I need to select all linked text frames of selecting text frame.
Please can anyone help me...
Please refer the above screenshot for your reference.
Trying script:
if (app.selection[0].nextTextFrame == null)
   if (app.selection[0].previousTextFrame != null)
      myParagraphs = app.selection[0].parentStory.paragraphs;
      for (j=0;j<myParagraphs.length;j++)
        myParentTF = myParagraphs[j].parentTextFrames[0].contents
        alert(myParentTF)
Output i needed:
Thanks in advance
BEGINNER

I am new to meta link

greetings,
my company got licenses for the oracle database recently, the database version we have is 10.2.0.1 i would like to upgarde to 10.2.0.3. i went to metalink and start trying to use it but i couldn't understand what to do... if some one can provide me with a guide on how to use meta link then that will be appreciated.
Karam Abuataya.

I think you should ask your customer contact at Oracle that (since you want to put that license/support money to good use) you need a run through of Metalink and Support processes to be able to take advantage of it all. For instance, there are tutorials for new Metalink users on a regular schedule.

FCE 3.5 Audio Meter Link to Frame Forward

Similar Messages

Maybe you are looking for