FCE 4 and Macbook memory...

Just bought Final Cut Express upgrade to version 4 - but, have realised the system reqs say I need min 1 GB of disk space. My macbook Pro has only 512 MB.
Is there a way round this? I was running the previous version of FCE no probs - I have a La Cie drive attached via Firewire, with 168 GB available...
Thanks!

Ok, have bought - and installed - the extra RAM. On 'About This Mac' it now reads 'Processor 1.83 GHz Intel Core Duo.2 GB 667 MHz DDR2 SDRAM'. Processor 1.83 GHz Intel Core Duo.'
So, all well and good. I followed the exact instructions re install from the Apple Site.
But now FCE won't start up.
It tries, tells me the usual warning re 'unable to locate Firewire' etc...
Then, just quits.
I've ran all the latest Software Updates, so I'm at a loss now...
Help!

Similar Messages

  • My macbook pro model mid 2009 is running slow. free memory is 35 mbs and inactive memory is  1.36 gb with a total of 5 gb RAM memory

    Problem description:
    too much inactive memory 1.87 gb and free memory only 35 mb
    EtreCheck version: 2.1.1 (104)
    Report generated 10 December 2014 3:30:26 pm IST
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Mid 2009) (Verified)
      MacBook Pro - model: MacBookPro5,5
      1 2.26 GHz Intel Core 2 Duo CPU: 2-core
      5 GB RAM Upgradeable
      BANK 0/DIMM0
      1 GB DDR3 1067 MHz ok
      BANK 1/DIMM0
      4 GB DDR3 1067 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      NVIDIA GeForce 9400M - VRAM: 256 MB
      Color LCD 1280 x 800
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: 4:42:54
    Disk Information: ℹ️
      WDC WD5000LPVT-80G33T2 disk0 : (500.11 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      [redacted] (disk0s2) / : 499.25 GB (142.01 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      HL-DT-ST DVDRW  GS23N 
    USB Information: ℹ️
      Apple Inc. Built-in iSight
      Apple Internal Memory Card Reader
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
    Gatekeeper: ℹ️
      Anywhere
    Kernel Extensions: ℹ️
      /System/Library/Extensions
      [not loaded] com.driver.KUSBModemCDC07 (4.0.2) [Support]
      [not loaded] com.driver.KUSBModemDataA07 (4.0.2) [Support]
    Startup Items: ℹ️
      JHHPortDetect: Path: /Library/StartupItems/JHHPortDetect
      Sudochmod: Path: /Library/StartupItems/Sudochmod
      Startup items are obsolete in OS X Yosemite
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
      [running] com.bjango.istatmenusagent.plist [Support]
      [loaded] com.google.keystone.agent.plist [Support]
      [loaded] com.oracle.java.Java-Updater.plist [Support]
      [running] jp.co.canon.CUPSCAPT.BG.plist [Support]
      [loaded] org.macosforge.xquartz.startx.plist [Support]
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
      [invalid?] com.adobe.SwitchBoard.plist [Support]
      [running] com.bjango.istatmenusdaemon.plist [Support]
      [loaded] com.google.keystone.daemon.plist [Support]
      [loaded] com.microsoft.office.licensing.helper.plist [Support]
      [loaded] com.oracle.java.Helper-Tool.plist [Support]
      [loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
      [loaded] org.macosforge.xquartz.privileged_startx.plist [Support]
      [loaded] org.tcpdump.chmod_bpf.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist [Support]
    User Login Items: ℹ️
      iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      Caffeine Application (/Applications/Caffeine.app)
      AdobeResourceSynchronizer ApplicationHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
      Dropbox Application (/Applications/Dropbox.app)
      HyperDock Helper UNKNOWN (missing value)
    Internet Plug-ins: ℹ️
      o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
      Default Browser: Version: 600 - SDK 10.10
      AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 [Support]
      FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
      Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
      QuickTime Plugin: Version: 7.7.3
      googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
      SharePointBrowserPlugin: Version: 14.0.0 [Support]
      AdobePDFViewer: Version: 11.0.09 - SDK 10.6 [Support]
      zako: Version: zako 1.0.0.0 - SDK 10.8 [Support]
      iPhotoPhotocast: Version: 7.0 - SDK 10.8
      JavaAppletPlugin: Version: Java 7 Update 71 Check version
    User internet Plug-ins: ℹ️
      BlueStacks Install Detector: Version: Unknown
    Safari Extensions: ℹ️
      AdBlock
      ClickToFlash
      Awesome Screenshot
      Breaking News
      The New York Times
    3rd Party Preference Panes: ℹ️
      Flash Player  [Support]
      Java  [Support]
    Time Machine: ℹ️
      Skip System Files: NO
      Mobile backups: ON
      Auto backup: YES
      Volumes being backed up:
      Arupreet: Disk size: 499.25 GB Disk used: 357.24 GB
      Destinations:
      CHIKKI [Local]
      Total size: 331.41 GB
      Total number of backups: 2
      Oldest backup: 2014-06-10 13:36:00 +0000
      Last backup: 2014-09-08 13:57:40 +0000
      Size of backup disk: Too small
      Backup size 331.41 GB < (Disk used 357.24 GB X 3)
    Top Processes by CPU: ℹ️
          8% python
          3% WindowServer
          3% uTorrent
          2% SystemUIServer
          0% mtmfs
    Top Processes by Memory: ℹ️
      1.29 GB JavaAppLauncher
      123 MB SystemUIServer
      102 MB iStatMenusDaemon
      86 MB com.apple.WebKit.WebContent
      81 MB WindowServer
    Virtual Memory Information: ℹ️
      50 MB Free RAM
      1.97 GB Active RAM
      1.90 GB Inactive RAM
      673 MB Wired RAM
      6.70 GB Page-ins
      8 MB Page-outs
    Diagnostics Information: ℹ️
      Dec 10, 2014, 10:48:11 AM Self test - passed
      Dec 9, 2014, 02:54:15 AM VLC_2014-12-09-025415_Arus-MacBook-Pro.crash

    Not sure if using Terminal would help:
    Launch Activity Monitor
    Select Memory tab
    Launch Terminal
    type sudo purge
    password
    10-15 sec later Terminal should refresh and show freed memory & cache

  • I HAD MY MACBOOK MEMORY CLEARED AND CANNOT UPLOAD MY IPHOTO ANYMORE

    I recently had my macbook memory cleared and reset to all default settings. I was advised to back up all my personal documents and data as everything will be cleared. However, due to some technical issue (and one of the reason for memory wipe) i had to manually backup important documents, which were my itune, iphoto, and uni assignments.
    After i my macbook had been wiped and returned to default settigns i began to reinstalled the documents i had backed up on my external hard drive. However, when i came to open iphoto it was saying i had to download it from the app store?? when i looked on the app store it was asking for me to buy iphotos for over £10 !! i was not aware i would have to buy this feature as i never originally bought the feature when i first got my macbook. without downloading iphoto i cannot access my photos which was the main thing i wanted to save as these are personal memories of me and my children.
    Can anyone help me with this issue as i do not feel i should buy iphoto just so i can recover my own photographs, i have already paid for the memory wipe as it was strongly advised by the technician, who also helped me back up my documents in the store (which took 4 hours). I am correct in thinking that iphoto originally came as standard on my macbook when i bought it in 2009 or will i be required to purchase this and download it again??

    Your post says you have a late 2009 MacBook with OS X 10.6.8. With the MacBook, you received 2 gray-faced OS X disks, one with the system programs and one with application programs. The application program disk will have iPhoto on it, so you would re-install it from there. See this Apple note on how to reinstall iPhoto.

  • HI, I HAVE A MacBook Pro 2.3GHz dual-core Intel i5 AND I WAN'T TO UPGRADE THE HARD DRIVE UP TO 750GB AND ALSO THE RAM MEMORY TO 8GB. WHAT SPECIFIC MODEL OF HARD DRIVE AND RAM MEMORY SHOULD I BUY??? THANKS

    HI, I HAVE A MacBook Pro 2.3GHz dual-core Intel i5 AND I WAN'T TO UPGRADE THE HARD DRIVE UP TO 750GB AND ALSO THE RAM MEMORY TO 8GB. WHAT SPECIFIC MODEL OF HARD DRIVE AND RAM MEMORY SHOULD I BUY??? THANKS

    No need to type in all caps - we HEAR you!
    I would take a look at the internal drives offered by both Crucial (click the link "Internal Hard Drives Now Available") and OWC. I would stay away from Western Digital drives as they seem to have problems on a number of Mac models.
    You can also shop for RAM at Crucial and OWC - just select the System Scanner tab at the Crucial website to find out which memory is right for your machine.
    Good luck,
    Clinton

  • Which Apple MacBook Pro has the most RAM and HDD memory?

    I would like to know this because I plan on buying a MacBook Pro and I just want to make sure I'm buying the one with the most RAM and HDD memory and not some other one. Why do I need specifically this? Because I'm a gamer; I like playing games. I'm a watcher too; I like watching movies. Last but not least, I would like to sync my iPhone to a device that's from the same company. I don't know why, but I guess it's because I don't like uncoordination, or something like that. In short, I don't believe in "clashing". Even electronics.

    The Hardware In Any Mac is Exactly the same as used in Any PC of like model year and included hardware. i7 being faster then an i5 CPU.
    Apple uses the same exact Intel CPUs and Chipsets that all other computer use manfacturer today. There is No difference.
    Ogelthorpe is comppletely correct that Windows, by nature of the OS, is better for running games and the hardware it comes on, by nature of the way they are manufactured even though it is the same hardware as in a Mac, is better for gaming because of the way they are cooled and the overall case design. More air vents and better air movement across the parts that get hot while gaming.
    Mac notebooks on the other hand don't cool as well by nature of the air intake and exhaust systems. Both air intake and exhaust are at the screen hinge and the fans are designed to be quieter then on most Windows PC notebooks. Even if Windows is installed on Mac that Mac will run hotter then a PC with the same exact hardware configurations. This is a fact and experienced by many Mac users. Including myself.
    Mac fans run all the time. From the second you start them up to the second they shut down completely. I personally don't know of any Windows PC notebook that do that. My Dell E6420 with the exact same CPU and more RAM, 16GBs in the Dell and 8 in my Mac, with the Dell having 2 drives, one a SSD the other a Spinner in the media bay, and the Mac having only one Seagate XT series in the main bay the Dell fans rarely come on unless I am taxing the system in some way. They are not on continuously and certainly not when I turn the system on. So Apple has designed the Mac to run the fans continuously to try and keep the system cool from the first power on.
    So your statement is completely false. But it is what most people think even though it is unfounded.
    ShaneBunting wrote:
    This is not true. The hardware is simply better on a Mac. Even when running Windows on a Mac, you'll have a far better experience than on a PC..

  • Should I upgrade to Snow Leopard/ Lion using a MacBook Pro with 2.26 GHz Inetl Core 2 Duo Processor and 2GB Memory? Can my old macbook take it?

    Should I upgrade to Snow Leopard/ Lion using a MacBook Pro with 2.26 GHz Inetl Core 2 Duo Processor and 2GB Memory? Can my old macbook take it?
    thanks

    Yes. You should be fine with Snow Leopard, but Lion requires a minimum of 2 GBs of RAM. If you upgrade to Lion I would first upgrade your RAM to at least 4 GBs if your model supports it. Also, see:
    How to Install OS X Updates Successfully
    A. Repair the Hard Drive and Permissions:
    Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally. 
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    B. Make a Bootable Backup Using Restore Option of Disk Utility:
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.
    C. Important: Please read before installing:
    If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
    You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
    The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update.  While the installation is in progress do not use the computer.
    D. To upgrade:
    Purchase the Snow Leopard Retail DVD.
    Boot From The OS X Installer Disc:
    Insert OS X Installer Disc into the optical drive.
    Restart the computer.
    Immediately after the chime press and hold down the "C" key.
    Release the key when the spinning gear below the dark gray Apple logo appears.
    Wait for installer to finish loading.
    E. If updating:
    Download and install update(s) 
    Use Software Update, or
    Download standalone updater(s).

  • Is it possible to upgrade my macbook air 13" from 1.86 GHz 128 gb flash and 2GB memory to the 2.13 GHz  256 and 4GB memory, how much would it cost?

    Is it possible to upgrade my macbook air 13" from 1.86 GHz 128 gb flash and 2GB memory to the 2.13 GHz  256 and 4GB memory, how much would it cost?

    About the only thing that "might" be able to do is upgrade the SSD. OWC sells SSD upgrades for that unit. You would have to contact Apple though to verify that no warranty issues would apply when making the upgrade.

  • HT1270 Used the right memory, both for my iMac and MacBook Pro, iMac worked, MacBook Pro didn't start (warning tone). Any idea?

    Used the right memory according to page, both for my iMac and MacBook Pro, iMac worked, MacBook Pro didn't start (warning tone).
    Any idea?

    I suggest you buy your memory from OWC or DataMem. Both guarantee the memory works or will replace it if it does not, no questions asked, within their 30 day return period. I've used both for over 20 years, and no complaints.

  • Is there any difference between DDR3 memory and LPDDR3 memory? As i brought my macbook air 2013 recently and i saw the specifications it is indicating DDR3, buy apple website stated LPDDR3. Anyone can advise on this?

    Hi
    Is there any difference between DDR3 memory and LPDDR3 memory? As i brought my macbook air 2013 recently and i saw the specifications in the system info that is indicating DDR3, but apple website stated LPDDR3. Anyone can advise on this?

    Welcome to Apple Support Communities
    Read > http://en.wikipedia.org/wiki/Mobile_DDR DDR is the RAM used in computers, and LPDDR is common in mobile computers

  • Imac and Macbook pro can no longer see one another

    I'm not sure why, but all since I upgraded to Yosemite, I can no longer see my iMac on my Macbook Pro and vice versa. I could always see the computer that I needed to connect to in finder, or I could connect with my iCloud password. As of today, I can no longer access my iMac from my Macbook Pro and that's a problem. If someone could provide directions (dumbed down version) explaining how to connect the computers from scratch, I would greatly appreciate it. I am fine with setting it up again but I can't recall how I did it.  Thanks so  much. I did upgrade both my iMac and MacBook pro to Yosemite over the weekend.
    Model Name: iMac
      Model Identifier: iMac11,3
      Processor Name: Intel Core i3
      Processor Speed: 3.2 GHz
      Number of Processors: 1
      Total Number of Cores: 2
      L2 Cache (per Core): 256 KB
      L3 Cache: 4 MB
      Memory: 4 G
      SMC Version (system): 1.59f2
    Model Name: iMac
      Model Identifier: iMac11,3
      Processor Name: Intel Core i3
      Processor Speed: 3.2 GHz
      Number of Processors: 1
      Total Number of Cores: 2
      L2 Cache (per Core): 256 KB
      L3 Cache: 4 MB
      Memory: 4 GB
      SMC Version (system): 1.59f2

    Ensure Sharing preferences are set correctly for both devices.

  • In OSX Activity Monitor, what's the difference between 'free' memory and 'inactive' memory

    In OS X Activity Monitor, what's the difference between 'free' memory and 'inactive' memory. My daughters 2Gb MacBook Pro is very slow, it probably needs more memory but there is almost 1Gb of 'inactive' memory but no 'free' memory when an application is opened.
    Thanks

    Free RAM is the one that has not been used by any application since you started up your Mac, and inactive RAM is the one that was used by an application and it is not in use anymore.
    1 GB of inactive RAM is a lot, and it may be the cause of the slowness. There are a lot of apps that allows you to turn inactive into free RAM. I use FreeMemory, but have a look at the Mac App Store.
    If you are a developer, you can do that with a command you can type into Terminal:
    sudo purge

  • Quality and aspect ratio with FCE and iPhoto

    Project started by importing hundreds of slides shot by different cameras with difference settings. Slides were imported into i-photo where I used the slideshow function to make several segments.  As I was choosing the photos and dragging them into slideshows I cropped them all into 16x9 ratio so they would all be uniform.  I then sent to QuickTime movie using the built in iPhoto export button and selected “custom export” setting with DV/DVCPRO-NTSC compression with quality set to “Best” and aspect ratio to 16x9.
    Then imported into FCE and did serious editing (music, effects, titles, etc.).  When finished I tried exporting as both a QT self-contained movie and QT conversion (using DV/DVCPRO and 16:9) but the quality is terrible and when I make a iDVD the picture is squeezed and distorted into a 4:3 ratio despite the fact that the IDVD is set to 16:9. I have spent over a month on this project and have fellow travelers waiting for my “creative” touch.  Can anyone tell me where I went wrong on both aspect ratio and quality? Thanks.
    PS: Am using MacBook Pro, OS 10.7.4 FCE 4.0.1 and iPhoto-11 9.3.2

    Hi
    I'm not shure - but I can share my thoughts
    I tried exporting as both a QT self-contained movie and QT conversion (using DV/DVCPRO and 16:9)
    I DO NEVER - Use Export as QuickTime CONVERSION
    I DO - Share as QuickTime .mov - straight off
    I had problems with 16x9 until I understood that
    • I had to select type of project as WideScreen in FC
    • Browser Window in FinalCut E and Pro - can extend far to the Right with several Columns. One Column states Anamorphic. When set my material to this. THEN introduced it into TimeLine. Can not be done in after hand.
    • Export as above
    • In iDVD there are TWO places to set 16x9
    - When creating a NEW iDVD Project - SELECT --> WideSrceen
    - In iDVD Project / Projectinfo [ Shift+cmd+I ]- ALSO set 16x9
    Yours Bengt W

  • Mac mini  and macbook air startup takes hours

    When I restart my mac mini, it takes approximately 16-18 HOURS to boot. During this time the grey screen is displayed with the Apple logo, and the turning wheel is turning and turning but nothing happens.
    I updated the mac mini to Mountain Lion.
    What is funny, my macbook air has exactly the same problem. So I dont think that this is a hardware related problem. My macbook air takes about 8-10 hours to restart.
    Anybody has the same experience or has a solution?
    Again, both my mac mini and macbook air have this problem.
    Thanks!!

    Whew, this is incredible!?
    See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
    http://support.apple.com/kb/PH7029
    Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
    How much RAM & free Disk space do you have also, click on the Memory & Disk Usage Tabs.
    Open Console in Utilities & see if there are any clues or repeating messages when this happens.
    In the Memory tab of Activity Monitor, are there a lot of Pageouts?
    Open console in Applications>Utilities, check the system log for the date/time of the last  Startup for clues.

  • Sharing computing power between macpro and macbook pro

    Hey all... someone mentioned to me that I can connect my latptop and desktop together so that I can "combine" processsing power. I use various music creation software, logicpro and protools and would like to use the laptop to offload/run the plugins and the desktop to run the audio programs. Can this be done? If so, how? I will also post this to the Logic forum. Thanks.
    Scot
    macpro and macbook pro   Mac OS X (10.4.9)  

    i must be humorously challenged... LOL... I am using my Macs for processing audio via Protools and Logic. What I wanted to do was to offload some memory intensive programs to the laptop, stuff like Altiverb, Soundtoys and NI software instruments. I generally have no issues running the Logic plugs but add BFD, NI Absynth, Soundtoys Echoboy/Filter Freak and Altiverb, plus Sample Tank etc... and I can melt down the MacPro even with 4G Ram... not so much running Logic but for sure with ProToolsLE.

  • Yosemite 10.10.2 update has slowed down my iMac and Macbook. Anyone else have this problem?

    My iMac and Macbook were operating well until the Yosemite 10.10.2 update. Now, the wheel spins when I try to scroll down on pages, or when I try to move from screen to screen. Programs freeze up more often, needing to be forced to quit, or just crash altogether. Safari has been particularly affected. Both computers are only 6 months old. I close all other programs and Safari tabs, but this does not help.
    (iMac 2.7 GHz Intel Core i5, Memory 8 GB 1600 MHz DDR3; specs on Macbook not handy as I post this.)
    I have come to dread OS X updates and I'll be careful about downloading them in the future.  I am becoming more and more disappointed in Apple as a whole. The last time I called Applecare for help was pointless. I learn more from forums like this.

    Activity Monitor - Mavericks  also Yosemite
    Activity Monitor in Mavericks has significant changes
    Performance Guide
    Why is my computer slow
    Why your Mac runs slower than it should
    Slow Mac After Mavericks
    Things you can do to resolve slowdowns  see post by Kappy
    Try running this program and then copy and paste the output in a reply. The program was created by Etresoft, a frequent contributor.  Please use copy and paste as screen shots can be hard to read.
    Etrecheck – System Information

Maybe you are looking for

  • Ipod Touch Totally Dead After Failed Update to 4.0 OS

    Hi folks, There is another discussion with the exact same title but the problem was never resolved. I decided to create a new discussion because I successfully revived my buddies iPod that had the same problem. I know a lot of people probably still h

  • Teamviewer changing lists as navigate through pages-probl for anyone else?

    Hi All, We're using R/3 4.7, ESS 50.4 and MSS 6.1.20.  After much correspondence with SAP we have discovered that the teamviewer does not behave the way we thought/want it to. Basically as the teamviewer is applied on a page basis, each page gets the

  • Mic wont work.

    I cant get my microphone to work, it worked fine last week. I tried a different mic and it still wont work. So I think its my laptop. I reinstalled my sound card and made sure it wasn't muted.

  • Using image as background of frame

    I have a JFrame. I want to add an image (created from a jpeg file) on it as a background. Then, I will draw on that background. Please tell me how can I do. I tried to use createImage method from JFrame object image = frame.createImage(440,400); and

  • Levels, not Curves in CS6

    Using CS6, try to open a curves adjustment layer...the way I have for years...levels opens. Will not correct. Have to close the app and reopen. Impossible to find on internet. What's up?