FCE 4 - No sound during editing.

I have upgraded from FCE HD 3.5.1.
Once I have captured or imported a clip I cannot hear the sound through my speakers. The VU meters are registering that there is sound on the audio tracks.
All settings match those from FCE 3.5.1.
When I use FCE 3.5.1 there is no problem with the sound.
Any help would be appreciated.

Hello!
I took 18 minutes video with my Sony DSC W200 digital camera. When I watched it with Quicktime all was OK.
I have tried to edit it with FCE but there is no sound and there is no audio wave seen on edit screen?
Has it something to do with HDTV, you can watch video on that kind of tv (Sonys own system).
I have checked all canvas systems and it does not help.
What to do?
Joska
Finland

Similar Messages

I cannot get sound when editing

I am not sure why I can't get sound when editing.
I've tried different things to correct and nothing is helping.

1: What's your setup?
- If you have external speakers, do you have sound when you unplug those?
2: Do you have sound from other apps and the system? (try the Sound PrefsPane..)
3: 'No sound when editing' Do you mean when scrubbing, or during playback??

Mac Pro makes clicking sounds during startup

Recently my Mac Pro began making clicking sounds during startup or upon waking from sleep mode. Usually there are six clicks lasting a total of about 3 seconds, and then the clicking stops. After that everything seems normal.
Since my computer didn't used to make these clicks, I suspect something could go very wrong in the near future. I don't know if these clicks are coming from the hard drive, the fan or, perhaps, relays.
Can anyone help?

Consilience wrote:
I moved both my hard drives to different slots
Do the drives themselves have relays in them or are there relays associated with each slot?
Hi, sorry for delay, an all nighter to re-assemble my case.
Interesting, just moving drives made a difference.
Possibly the jarring required to get them out & back in altered internal interference.
Or the drives connection made better contact. Tough call there.
The drives arms inside swing back & forth at blurring speed across the drive platter to read it.
Not sure how old the drives are, but like mine, they are about 3-4 years old, and I have a theory when they get to 5 years old, like me, I now start clicking going up stairs.
* The hardware test that's part of your OS install disc should report if it sees an issue with the drive.
It's also highly recommended to use http://www.alsoft.com/diskwarrior/index.html
By chance do you monitor the temps inside?
There are a few temp programs that will show components and their temp & rpm of fans.
I like http://www.macupdate.com/info.php/id/23049/smcfancontrol
This will let you bump up the fan speeds to where it made a huge difference when set at 1100 rpm.
At that speed, you just start to notice the fans, but it dropped my internal temps by 30 degrees. I had 174 degrees prior, which is not the best thing with large ram filled slots.
For reference, my temps now with smc', the hottest memory stays about 134 vs 174, and exhaust steady at 93, with ambient showing 82. I can live with that.
I occasionally run custom floor fan to move the air out of the room.
Ceiling fan is also on.
Back to drives"
You can also leave the case door off while running him.
The temps briefly add about 10 degrees max while I tested this.
Sit close while you have it on to pin point the clicks, but I still think it's the drive.
At first sign of clicking, rest hand at under side of drive to verify.
Drive 1 will not have that access.
Relays in theory do click, but in computers, they are micro small, I doubt one could hear them.
Were any changes made recently to park the drives?
This is usually not recommended.
I may have forgot something to add, but you have enough for the moment.
Good Luck, and if the inside needs it, use bright flash light to inspect closely and blow out
any excess dust.
The optical drive bay slides out easy, as do the RAM sleds.
Inspect power supply fan, and others for excess dust.
I just lay the case on it's side, and ribbon cable allows it to set the optical bay sled on the edge of case.
All connecting cables are removed from the outside of case prior.
Doubled up bed sheet works well on the floor, desk, table and protects from scratches.
I have airtank set at 30 psi from airbrush compressor to remove excess, and detailed with Q-tips dipped in alcohol. Including video card fan. Last nights mission.
Later.
Message was edited by: Philscbx

Docked iPod only outputs sound during video to TV

I have a 5G iPod in an Apple dock, connected to my TV using a Monster audio cable and an S-Video cable. For some reason, it only outputs sound during videos or a photo slide show - not at all for music only playback. I'm baffled! Any idea why? It's a Panasonic plasma, and I've tried three different inputs. None work for music, but video is fine.

The iPhone 4, unlike iPod, doesn't ask you to set for PAL or NTSC. In fact, in the SETTINGS/Video menu it only asks if you want to "Start Playing From Beginning", "Closed Captioning" and "Home Sharing". I was surprised it had no settings like the iPod at all.

No sound during import from camcorder

When I am importing video from a DV tape in a camcorder I don't hear any sound. After the clip is captured, you can hear the sound during playback. Is there a setting that allows you to hear the sound during import? I have tried importing HDV format from a camcorder and regular DV from a tape deck with the same results.

iMovie does not play sound on import. This makes sense if you consider that most current camcorders do not import in real time. They are faster or slower than real time depending on the speed of the Mac.
See if your camera has a speaker. You can listen from the camcorder.

How to show Append Changes previous value in text box during edit

Hi,
I am using multi text column with append mode, all feature of append mode is working fine,but when any other field has been changed on that time append text box take blank value.
when using same list with ssrs ,report shows the current data,but after approved by manager current item change in blank and current data come in history.
is any way to do ,if any body change the any item same data appear during edit time in same column.
Hasan Jamal Siddiqui(MCTS,MCPD,ITIL@V3),Sharepoint and EPM Consultant,TCS
|
| Twitter

Hi Hasan,
According to your description, my understanding is that the multi text column with append mode is not working fine in your SharePoint 2010.
For reproducing your scenario, I created a new custom list , turned on its version feature and added a multi text column with append mode. But it was working fine when I change the values of both the
multi text column and other columns.
For your issue, could you create a new list to verify the multi text column with append mode works correctly.
Best Regards,
Eric
Eric Tao
TechNet Community Support

TS5150 i'm having trouble with the sound during playback on my apple tv

theres no sound during playback on my apple tv

Welcome to the Apple Community mdez3799
Have you tried adjusting the "Audio Out" and the "Dolby Digital" settings in settings > audio and video? It may be worth trying several combinations of these settings, although typically it is the "Dolby Digital" setting that causes most problems for users.
If you are using a sound system/receiver, make sure that you have correctly mapped the input port on your sound system to the output, if you are unsure about how to do this, refer to the manual that came with your sound system.
Have you tried playing various content sources (i.e. podcasts, music, iTunes Store video, other video etc), do you have the same problem with all types of content? If you use optical you might also check that you can see a red light at the end of your optical audio cable. Is your optical audio cable plugged straight into your sound system, or does it go through a switch or other device?

No sound during calls in iphone4

hi friends , recently i hv updated my iphone 4 to ios 7 , it was working perfectly , but after 2 days itz fell down ... after that no sound during calls(both mic n speaker) , but itz working on skype n viber .idk watz d prob , can any one help me out

Hi, I do have the same problem. Just bought the phone. Updated right after bying to Androit 4.1.2 and Build nr 9.1.A.1.140.Calls with headset or loudspeaker works. But if I switch it too normal calling I´couldn´t hear a thing. I turned the phone on and off: no change. I even did a reset: no change.I really didn´t wanted 2 buy an iphone because I thought that the androit phones got better over the years. Somehow I really disappointed right after 3 days having the new phone. Is there any help for this problem, did we flipped the wrong switch somewere in an hidden submenu or is the phone broken? Thx for the help

No Sound During DVD Playback

I have a new HP elitebook 8460p and there is no sound during DVD playback. Is there a setting I may be able to change? Here is a list of things I've tried and pertinent information:
- Confirmed all system mute settings are off (e.g., not muted)
- Confirmed DVD works on other devices
- DVD will not play sound in InterActual Player, Windows Media Player, or VLC Media Player
- Picture is fine...just no audio
- Running XP
- All other system sounds work
Help!

Try installing AC3 Filter:
http://www.free-codecs.com/download/ac3_filter.htm
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

I have a MX 860 Printer and it makes a squeaking sound during warm-up but not during printing.

This printer is making loud squeaking sounds during warm-up, it prints ok but I don't know where it is coming from or how to go about fixing it.Any help would be appreciated.

Hi Den,
Please open the cover to the printer and look for any foriegn objects. Also, please look in the paper feed opening for anything that may be out of place.
If you continue to have difficulties, please contact our support group using the following link:
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

FCP quits during editing

*Hi, FCP keeps quitting during editing. usually when playing the timeline.*
*Anyone knows what's causing it?*
Process: Final Cut Pro [354]
Path: /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Identifier: com.apple.FinalCutPro
Version: 6.0.5 (6.0.5)
Code Type: X86 (Native)
Parent Process: launchd [84]
Date/Time: 2009-03-03 12:22:54.713 +0800
OS Version: Mac OS X 10.5.6 (9G55)
Report Version: 6
Exception Type: EXCBADACCESS (SIGBUS)
Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000000
Crashed Thread: 83
System Configuration
:Model: iMac7,1, BootROM IM71.007A.B03, 2 processors, Intel Core 2 Duo, 2.8 GHz, 4 GB
Graphics: kHW_ATIr600M76Item, ATI,RadeonHD2600, spdisplayspciedevice, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR2 SDRAM, 667 MHz
Memory Module: BANK 1/DIMM1, 2 GB, DDR2 SDRAM, 667 MHz
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.38.24)
Bluetooth: Version 2.1.3f8, 2 service, 1 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD5000AAKS-40TMA0, 465.76 GB
Parallel ATA Device: OPTIARC DVD RW AD-5630A
USB Device: Keyboard Hub, (null) mA
USB Device: Apple Keyboard, (null) mA
USB Device: My Book, (null) mA
USB Device: My Book, (null) mA
USB Device: Built-in iSight, (null) mA
USB Device: IR Receiver, (null) mA
USB Device: Bluetooth USB Host Controller, (null) mA
Thread 83 crashed with X86 Thread State (32-bit):
eax: 0xffafd401 ebx: 0x6714668d ecx: 0xffafd400 edx: 0x00000000
edi: 0xffffffa3 esi: 0x00000000 ebp: 0xb0d47068 esp: 0xb0d4702c
ss: 0x0000001f efl: 0x00010212 eip: 0x6713d098 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x0000001f gs: 0x00000037
cr2: 0x00000000
Binary Images:
0x1000 - 0x75cfe8 com.apple.FinalCutPro 6.0.5 (6.0.5) /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
0xb23000 - 0xb26fe0 +KGCore ??? (???) /Applications/Final Cut Pro.app/Contents/Frameworks/KGCore.framework/Versions/A/KGCore

Since I don't know what a lot of these crash reports really mean I can only guess. However I see it reporting MyBook on a USB port. FCP wants firewire for external drives.
Try that, repairing permissions and resetting FCP prefs tho I suspect it's the drives on USB. try that first

Aperture corrupting images during editing

Hello,
Starting a few days ago, aperture started corrupting images during editing. This was normally at the time of my fist cut, going through doing simple straighten and croping. Sometimes it would happen when doing a small lighten or darken of the exposure. I purchased a new MacBook Pro about a month ago but this only started happening this week. No OS or Aperture upgrades this week. I did have a crash earlier this week and after the crash my Spotlight re-indexed my computer. I updated QuickSilver this week and Awaken. I tried quiting both QS and Awaken but problem still happens. The real scary thing is I usally have to go back and re-import the raw CR2 image to fix the problem, doing an update from master or resetting all adjustments does not fix the problem. Below is an example of an image with the problem. This is a Version Export of a corrupted image, as you can see the cor Can I get any help?

Ernie Stamper:
The Aperture Libraries are on the local drive. I do have an external Firewire drive I can use to test your theory but since I recently replaced the whole laptop at the Apple store so I am thinking it is not hardware related but one of three things: an Aperture bug, my configuration, or memory (see more on memory below).
leonieDF:
I don't think it is related to a hardware issue unless it is memory. I took the laptop into the mac store because I was having a hardware issue not discussed in this thread. The laptop was completely replaced except for the memory since I purchased 8GB of memory after the computer was purchased. I put the 8GB memory back into the new laptop. If this is a memory problem it is not showing up in diagnostics. I am planning on doing two things this weekend. First thing is putting back in the original apply memory and testing. If I still get the issue I am going to do a complete uninstall of Aperture and re-install maybe something in my settings/libaries are corrupted. I am reaching for straws at this point. I might also try a complete reformat and only install Aperture and test to see if something else installed might be causing this, but I can't think of what it would be.

Freezing, Application Ending while using PSE 12 during editing.

Good afternoon, I'm using PSE 12 and the application keeps on freezing and ending during editing. Just purchased a new MAC laptop that is running Yosemite 10.10. Any advice? Thank you in advance.

CSanchez98
If your program is Photoshop Elements 12, you have posted in the wrong forum. Your thread has somehow been posted in the Adobe Premiere Elements Forum (video editing).
Please repost your thread in the Adobe Photoshop Elements Forum
https://forums.adobe.com/community/photoshop_elements
or wait for a moderator here to see your thread here and move it from here to there.
Much has been written about Photoshop Elements 12 on Mac Yosemite 10.10 and the good people in the Adobe Photoshop Elements Forum should be
able to advise you with the best information possible on this matter.
ATR

Help: Just finished shooting a wedding and Aperture crashes constantly during editing. All pic's in RAW and even after making sure I have the latest Aperture update, I have had to rebuild my library twice and "repair" does not seem to fix the issue. Help?

Help: Just finished shooting a wedding and Aperture crashes constantly during editing. All pic's in RAW and even after making sure I have the latest Aperture update, I have had to rebuild my library twice and "repair" does not seem to fix the issue. Help?

Well!
If you have ThunderBolt, I would go with such for an External Working Drive, spinning platter or SSD depending on your budget
This does not have to be huge just big enough to house your most current Jobs
Once the Current Job is put to rest I would move it to a larger multi bay hard drive unit, USB or FireWire nothing fancy, no RAID, set up as one single Disk
This would only be accessed when something is needed from a past Job so the connection does not have to be speedy
The Drobo would be relegated to Vaults and backups
You can set up a Vault on the Drobo to back up the External Working Library and then Reconnect it when you have moved the Library over to the other Enclosure
This has worked for me pretty smoothly for a long while, but I have found over the years that one can not assume all people work in the same manner! :-)

Stop Playback Looping During Editing

Can't seem to find where to set the loop/don't loop option. At the end of the timeline, the playback goes to the beginning and starts playback again. I want it to stop at the end and not loop (during editing). Can you help me find the setting to stop it from continuing playback from the beginning of the clip (stop playback looping during editing).
Premiere Elements 10
Win7(64)

There is no direct way to stop playback AT the last Frame.
Does the End key not work on your computer?
Once playback has been stopped, the PageUp and PageDn keys will take you to the first Frame of the last Clip, or to the first Frame of that last Clip. The Cursor keys will also step you, Frame-by-Frame, inside the Clip.
Good luck,
Hunt

FCE 4 - No sound during editing.

Similar Messages

Maybe you are looking for