FCE 4: Picture in Viewer and Canvas is too small

I'm still learning but the picture in my Viewer and Canvas don't show very well. They show up with 2 grey bars on the left and right of the picture. Above the picture it shows 71% instead of 100%. When I put to 100% the picture will be zoomed very big. I have no idea where's the problem but there must be something very wrong. Before i had crosslines in the viewer but this problem is solved. But how do i get the picture back to fullsize in the Viewer and Canvas?

Tom's right, if there isn't enough room for FCE to display the image full size in the window it scales it to fit. Make the windows larger, (for example put it on compositing view under window arrangement), and then choose scale to fit for each of the images.

Similar Messages

I uploaded pictures to iphoto and they are too small. How do I make them normal size for printing?

The pictures I uploaded from my digital camera are stored in iPhoto and under Photo_data_roll... I am trying to print them, but the quality is very bad because the size of the photos was compressed (or something) when I uploaded them. How do I get the photos to their normal size?

This sounds like it is more likely a problem with your camera. Digital cameras have setting for resolution and amount of compression used. I would start by looking there. If resolution is set low or compression too high, the picture might look okay on a camera's two inch screen but like c**p in iPhoto.

16:9 viewer and canvas

Ok, this is a simple thing, yet it is bothering me. Every time I see a picture of someone using FCE, the viewer and canvas are widescreen. I can't seem to get my canvas and viewer to be widescreen. I can work with widescreen just fine, but I have grey bars above and below the image. My viewer and canvas are in 4:3 ratio. Can anyone explain how to get the viewer and canvas into a 16:9 ratio?
Thanks
Alex

I am assuming that you are working with standard definition DV but have the camera set to the 16:9 setting? If so, you need to change the Easy Setup setting to DV-NTSC Anamorphic. After changing that setting create a new Project, or from the current project, just create a new Sequence (since the existing default first Sequence will still be using the DV-NTSC setting). Once you open the new Sequence, click Window, Arrange and choose one of the existing settings (Standard, Compositing, or Small Windows). The Viewer and Canvas window should automatically switch to the widescreen 16:9 format with no grey bars. The Browser and Timeline windows will also resize to match the changes in the Viewer and Canvas.

FCP 7, viewer and canvas window is dark in lion

How to fix this problem???

The image in the Viewer and Canvas windows are 1 to 2 apperture too dark. When I convert a timeline to .mov file into Compressor or Quicktime converter, has the picture (movie) the right exposure ...
hope my English is understandable...

Color profile for Viewer and Canvas?

I've noticed that the color of the video in the FCPro 4.5 Viewer and Canvas looks absolutely nothing like the color when I output to DVD or QuickTime movie. (The video in FCPro seems to be much darker.) Is there a way to make the Viewer and Canvas look more analagous to what I'm going to get on final output?
Thanks.

Nope. Computer monitors colors have such a wide range that they are very unreliable. This is why it is best to hook up a TV, or better yet a properly calibrated NTSC Monitor (the latter only if you are producing professional video).
#8 External Monitor Viewing.
Shane's Stock Answer #8:
A simple path is mac > firewire > camera or deck > rca cables > tv
Then start up your camera and tv, then open fcp.
Then go View > External video > all frames
Video playback should be Apple firewire NTSC (If you are using an NTSC set)
Audio playback should be Audio follows Video
Techinially, this should send synched video to your TV
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section
For all the stock answers, click on this link:
Shane Ross, "Stock Answers", 03:58pm Jan 13, 2005 CDT

Aperture stopped showing pictures in viewer and split view

Suddenly Aperture 3 has stopped showing any pictures in viewer and split view (except for the bottom fim strip) but I can see them all in browser view. I have tried using Aperture Repair and have reset Aperture (using Clean My Mac to delete the user setup files). I also tried creating a new library with just a few files to see if the size of the library was an issue. I also tried opening the libraries in iPhoto and have the same result. I can browse the minatures but not open the larger pictures.
The only thing I have yet to try is to delete and reinstall Aperture. But since iPhoto has the same problem, I don't see how that would be the issue.
Aperture is version 3.5.1, OS is OSX 10.9.2.

I would have to redo the cleanmymac step but essentially it is like creating a new install before using the app.
If you do not know, what exactly will be uninstalled, by a general cleaning application, don't use it. That is risky.
Using a different user account makes no difference.
That means, you are having a system wide problem. Fixing your Aperture library or settings in your account will probably not help.
First thing to try, reinstall Aperture.
And if that does not bring your split view back, reinstall Mavericks. You may have missing caches and necessary configuration files, since iPhoto is having the same problem.
Did you run CleanMyMac to uninstall other applications, before the problem first occured? Usually it is much safer, to use only the uninstaller, that come with an application. Otherwise, you are risking to uninstall items needed by other applications or the system.
To reinstall MacOS X 10.9.2, boot into OS X Recovery, see this document: http://support.apple.com/kb/HT4718

Cant see any video only white screens in Viewer and Canvas

I dont know if anyone has encountered this figured out how to resolve it yet. In FCP 7 on Snow Leopard when i drag a clip into viewer or try to edit in the Canvas all i see is a white screen. The title safe lines and wireframe show up when i turn these on and off, but no video. I occasionally get a solarized image in the Canvas. the time code progresses, but nothing in either window.
Thanks for any insights.

Thanks for all the suggestions, including links back to earlier discussions. This did shed some light, (and kicked me to be more explicit), when reviewing an earlier question on the same issue, but stating that this happened on an external Dell 2408 monitor...which is what I am using to edit. When i open the MBP and remove the video miniport cable and try to play on the laptop display, all is well, I can see video in both Viewer and Canvas. When i plug the monitor back in and drag these windows over to the monitor (cant move the FCP application wholesale) they also play fine. When i close the MBP, wait and refire it up with mouse or keyboard...I see video in both, but when i play either one the image jumps back and forth, cycling from one frame and back...while the time code advances and the audio track does too.

Green screen in both viewer and canvas

Came in this morning, tried to log and capture some material from my dsr-11. Got i/o error. Quit, restarted and the viewer and canvas screens were green. Quit and tried starting FCP without a project open. Same thing. Tried restoring old preferences. same thing. Tried restarting from cloned drive, same problem which seems to indicate a hardware problem, ran hardware tests in techtool pro without any success. Any ideas?

Update. I bought a new firewire 800 card (a LaCie, the same as the old one) but haven't installed it yet. I figured, let's see what happens if you reconnect a drive to the old firewire 800 card. Same thing; both the viewer and canvas screens are green. I quit, disconnect the drive from the firewire 800 card, restore preferences using fcprescue, same thing. I do a restart, same thing. Then I do what I did yesterday, shut down, disconnected the g5 from power for 5 minutes, reconnected, restarted, everything's working again.
So a good reminder: if things are working properly and you've tried a bunch of remedial steps, Shut down and disconnect power from your computer for a couple of minutes. Never made much sense to me, but it sometimes will help.
I'll replace the firewire 800 card in a while and post back what happens.

White Viewer and Canvas screens in FC Studio & Not an Idiot

iMac
2.66 GHz Core Duo
2GB RAM
OS X 10.5.8
FCS 3
The viewer and canvas have apparently decided to flip to white and remain there. But first, they decided they'd rather display a strange, posterized/solarized version of whatever clip was loaded at the time.
Viewer prefs set properly to RGB
Background set to black.
Changing display prefs from millions to thousands then back again - fail.
Clean reinstall of FC Studio - fail.
QT test clip - 720x480, DV/DVCPRO - NTSC
Any ideas?

Viewer prefs set properly to RGB<</div>
Okay, you know that one. Good.
Background set to black. <</div>
Completely irrelevant. Not good.
Changing display prefs from millions to thousands then back again - fail. <</div>
Right, but a restart of FCP or the Mac might also be part of that debug just to rule out all possibilities.
Clean reinstall of FC Studio - fail. <</div>
Of course. Reinstalling Apple software is the LAST thing we'd suggest. Well, it's the last thing I would suggest. It is almost always a complete waste of time for a long list of reasons but mainly for only one: unlike Windows apps, Apple software just doesn't work that way.
QT test clip - 720x480, DV/DVCPRO - NTSC <</div>
Okie dokie. When you play this clip in QT what happens?
when you launch Motion and attempt to run a previously saved comp what happens?
Any ideas? < </div>
Debugging your particular issue is not going to be easy. Trying to figure out if it's FCP, QT, your graphics card, your monitor, or some other weird and obscure setting is a question, largely, of having a good feel for your system's behaviors and application inventory and history.
Stick with it, we're going to be asking you some really idiotic questions and asking you to perform some really lame tests.
bogiesan

Help Viewer Font Size Way Too Small

Hello,
The font size of the adobe help viewer content is way too
small (it looks like a 4 pt or something). I can hardly read it at
all. Can someone please tell me how to enlarge it?
Thanks a lot!
Mike

Hi Mike
I recall that earlier incarnations of the help viewer had a
zoom setting that would allow for this. Sadly, it seems to have
disappeared and I'm unsure why.
Perhaps it will be helpful to know that you may view the
Captivate help as basic web pages? The URL is below:
Click here
to view
Cheers... Rick

Photoshop CC icons and text are too small: how to adjust so they're readable? [was: Joanne]

I have just downloaded Creative Cloud on a new computer. The new photoshop icons and text are too small for me to see or work with. I cannot seem to adjust this so its "useable"

Hey Bob,
Ive put feature requests for this in before and I know many others have as well. Is there any way to see if Adobe is actually working on this? I dont really consider this a feature request, it should be standard with the software. A feature request would be something like creative cloud libraries, not the ability to make font sizes and icons bigger.

No cursor on any website, and boxes are too small to type username and password. Example I can't type username and password for yahoo e-mail

Example of no cursor. Any website, such as youtube, there is no cursor in the box, and there are no letters when I type, but the system recognizes what I type. As for e-mail, hotmail works o.k., but with yahoo the boxes for username and password are too small, there is no cursor and I can't type anything. With gmail, there is no cursor, but I can type my username and password.

Try:
iOS: Troubleshooting FaceTime and iMessage activation

Black background in viewer and canvas

Hello
I applied blue/green filter to my clip, it is showing a black background when I play it in viewer but white background when I just view it?
ANy ideas?

Click on the % above the Canvas and Viewer and then select FIT TO WINDOW. If the gray is still there, manually resize the window to get rid of it.
It has always been gray.
Shane
"There's no need to fear, UNDERDOG is here!"

Duration indicators in the Viewer and Canvas

Usually, when you place and IN and OUT point in either the Viewer or
Canvas/Timeline, the top left window (in the Viewer or Canvas) shows you the duration of the time between those IN and OUT points.
But sometimes it's giving an entirely different number.
Can anybody explain what it's showing when not the duration between the IN and OUT (or the entire clip length if no IN's or OUT's)?
And what makes the difference between why it's showing the duration or not (when IN AND OUT points are present).
Thanks.

I'm not sure what else it would be showing you. Only thing I can think would mess it up is you have a time code break within the clip that is messing up the count.
rh

Grey background in viewer and canvas

Hi all,
I don't know how it happened but the background (on the sides of my viewable clip) is grey. I thought that it used to be black. For some reason, it's annoying me. Any idea's?
-Pk

Click on the % above the Canvas and Viewer and then select FIT TO WINDOW. If the gray is still there, manually resize the window to get rid of it.
It has always been gray.
Shane
"There's no need to fear, UNDERDOG is here!"

FCE 4: Picture in Viewer and Canvas is too small

Similar Messages

Maybe you are looking for