FCE 4 - which file settings for DVDSP2?

I've just upgraded my OP system from 10.2 to 10.5 Leopard and Final Cut Express from V2 to V4.
To create a file to use in DVDStudio Pro 2, I used to go 'Export'> QT Conversion> MPG2> Double pass and had my own settings which used to give good quality results when that file was brought into DVDSP when I created a DVD.
On FCE Vs4 this option has disapeared - so I guess I will use QT conversion but what will give the best settings from there?
Also I seem to have missed out on Livetype- probably did not check it on the install disc upgrade?
Thanks in advance

Do you know for certain that iDVD 4 won't work with Leopard? When I'm told something won't work I generally try it ....... and occasionally it does work!
AFAIK you just install iLife 09 and it over-writes the existing apps, unless you have altered their names in the Applications folder.
The iLife apps are pretty well self-contained and not as complex as FCE so there is no need to uninstall them.

Similar Messages

  • Which project settings for project for Canon Powershot Video Editing?

    Which project settings for project for Canon Powershot Video Editing?
    I want to edit video taken with a Canon Powershot SD 550 taken in NTSC 640 x 480. When I start a new project, which project settings should I be using? Also when exporting the project to view on a computer should I stick with the AVI or will MPEG or another universal format give me better end quality?

    Hunt,
    This user has two thread topics here that are identical to ones at the forum which I frequent. Early on I  downloaded video from the Canon Powershot that he says he is using for the basis of my comments. So, I have put that video through gspot myself. Since the user is going between the two forums (mostly here), I did not want anything lost in the back and forth. The goal is to help attainment of the goal. That is why I am including comments at both locations:
    At The Other Forum
    Project Settings Thread
    http://www.elementsvillage.com/forums/showthread.php?t=52299
    Rotation Thread
    http://www.elementsvillage.com/forums/showthread.php?t=52298
    The user has gotten back to me on the video rotation issue, thanking me, but telling me that another workflow was identified...and, as I note, generously shared with both sites. I am in the process of personally checking out what he said worked for him in that regard. However, the user has not gotten back to me on the topic of project settings.
    So to expedite matters, when you get a chance, could you please check out my comments in that thread? I would be interested in your perspective on the matter and what I wrote.
    Thanks.
    ATR

  • FCE-HD export settings for slideshow

    Hey dear specialists,
    I need to have a help for the export settings for a slideshow
    I am using FCE-HD 4.01 on either MacBookPro with Mountain Lion or on my old G5 with 10.6
    Input are slides in JPEG with 15MByte Pixel.
    As soon as I am using transition of a picture the result in export in all setting I can choose from FCE, which I found out is very bad, because picture has the interlacing effects at the borders
    What can I change to get a good result
    Thanks in advance for the feedbacks
    Best regards
    FJ
    N.b.:  screenshot abstract >>>> see right hand video lines

    Hey Russ,
    the video rate of the object does not change when I manipulate on the easy setting
    If I import pictures, I do this directly from pircture folder into the BIN, and that should be independently from video input setting
    The frame rate should also not be a problem for me here in Germany, because working directly from MAC to flatscreen
    I put you a screenshot of the new sequence
    The Mov output looks not that bad, even if one looks into detail see picture attached, the steps between one and next frame creates problems
    I try also to send you the latest version of a slide transiltion example in iPhone quality ( this can not be attached ) it is a 2MB file. If you like I send you by email.
    looks a bit improved vs the morning, but I do not feel confident.
    What do you think?
    Best regards and will come back tomorrow
    FJ

  • Execute Teststand as windows-user: which files needed for write-access

    Hello,
    which files/directories do i have to set for write access?
    Normally windows-administrator can access everything.
    But a windows-user has for example no write-acces to teststand\Cfg.
    So sometimes i get the error-message that a file is write protected.
    Is this somewhere explained in the TS-documentation that also a windows-user need write-access? I have this question from a client and i am not sure how exactly it is.
    Thx for info
    Message Edited by OnlyOne on 07-10-2009 05:36 AM

    Hi OnlyOne,
    With TestStand 4.1 and later, we changed the directories for the TestStand Cfg folder and the TestStand Public folder (formerly called the TestStand Users Directory). These changes allow a normal Windows-User to write to the TestStand Cfg and Public folders without having to specifically grant write permissions.
    Manooch H.
    National Instruments

  • FILE Settings for Archiving

    Hi All,
    I'm having some trouble with archiving.  Currently I am trying to archive production orders.  I have gone through the steps of finding TECO orders, setting their deletion flags and indicators with PPARCHP1, and have done a test run with PPARCHA1 which is successful.  However, when I try to do a production run, I recieve an error.  Also, when I try SARA and object PP_ORDER, I get an error in the log saying "Operating system message: No such file or directory". 
    I believe this is a problem with the settings in FILE.  I have made a logical path ARCHIVE_PROD and tried using a physical path to both my desktop, and another drive, such as I:\ARCHIVE\<FILENAME>.  The logical file name ARCHIVE_PROD1 with data format WK1, and refers to Logical path ARCHIVE_PROD.  I'm not sure what I should put for the Physical file.
    Our BASIS admin has never worked with FILE either.  Could someone help me out on how to configure the logical file path and name correctly? 
    Thanks,
    J

    Hi J,
    Try this:
    Logical Path-  'ARCHIVE_PROD'
    Physical Path- 'I:\ARCHIVE\<FILENAME>'
    ( i assume you are using Windows OS; choose syntax group as windows)
    Logical File Name: 'ARCH_PROD_LFN'
    Physical File Name: '<SYSID><CLIENT>_<PARAM_3>_<DATE>_<TIME>_<PARAM_2>'
    (enter the pysical file name as it is, without the quotes. at run time SYSID will be replaced by system id, CLIENT by client number, PARAM_3 by archive object id, DATE by date, TIME by time and PARAM_2 by a counter value)
    also take care that the archive folder I:\ARCHIVE\ in this case has proper permissions so that the sidadm user can access this folder for writing.
    all the best,
    Naveen

  • Which sequence settings for Canon Rebel T2i ?

    Hi everyone!
    I need immediate help. A friend of mine did a rough cut of a project (in Windows Movie Maker) shot with a Canon Rebel T2i.
    He gave me the file (in .wmv), so that I could do a little color correction and sound editing in Adobe Premiere Pro CS 4.
    I am not sure which settings I have to choose when creating a new project.
    I guess the settings that I chose were wrong, because when I played the video, there was something like a blue flash covering half of the frame every second.
    What should I do?
    Here is a picture:

    Hi there
    You should re-post this in the Premiere Pro forum. This forum is for Adobe Captivate discussion.
    Click the link below, then on the page that appears, click the drop-down selector and choose Premiere.
    Click here
    Cheers... Rick

  • Outlook PRF file settings for Exchange 2013 environment

    Hi Team,
    Client - Outlook 2007
    Existing environment - exchange 2007
    New environment - exchange 2013
    Recently migration of exchange 2007 to exchange 2013 happened in our environment subsequently some users mailboxes are moved from exchange 2007 to exchange 2013.
    In the Exchange 2007 environment, users outlook profile settings are applied via importing the below prf file and it works fine.
    ;Automatically generated PRF file from the Microsoft Office Customization and Installation Wizard
    ; Section 1 - Profile Defaults
    [General]
    Custom=1
    ProfileName=outlook
    DefaultProfile=Yes
    OverwriteProfile=Yes
    ModifyDefaultProfileIfPresent=false
    ; Section 2 - Services in Profile
    [Service List]
    ServiceX=Microsoft Outlook Client
    ServiceEGS=Exchange Global Section
    Service1=Microsoft Exchange Server
    ServiceEGS=Exchange Global Section
    ; Section 3 - List of internet accounts
    [Internet Account List]
    ; Section 4 - Default values for each service.
    [ServiceX]
    CachedExchangeMode=0x00000002
    CachedExchangeSlowDetect=true
    [ServiceEGS]
    CachedExchangeConfigFlags=0x00000900
    MailboxName=%UserName%
    HomeServer=mailboxserver.exchange.xxx.xx
    [Service1]
    OverwriteExistingService=No
    UniqueService=Yes
    MailboxName=%UserName%
    HomeServer=mailboxserver.exchange.xxxx.xa
    AccountName=Microsoft Exchange Server
    ; Section 5 - Values for each internet account.
    ; Section 6 - Mapping for profile properties
    [Microsoft Exchange Server]
    ServiceName=MSEMS
    MDBGUID=5494A1C0297F101BA58708002B2A2517
    MailboxName=PT_STRING8,0x6607
    HomeServer=PT_STRING8,0x6608
    OfflineAddressBookPath=PT_STRING8,0x660E
    OfflineFolderPathAndFilename=PT_STRING8,0x6610
    [Exchange Global Section]
    SectionGUID=13dbb0c8aa05101a9bb000aa002fc45a
    MailboxName=PT_STRING8,0x6607
    HomeServer=PT_STRING8,0x6608
    RPCoverHTTPflags=PT_LONG,0x6623
    RPCProxyServer=PT_UNICODE,0x6622
    RPCProxyPrincipalName=PT_UNICODE,0x6625
    RPCProxyAuthScheme=PT_LONG,0x6627
    CachedExchangeConfigFlags=PT_LONG,0x6629
    [Microsoft Mail]
    ServiceName=MSFS
    ServerPath=PT_STRING8,0x6600
    Mailbox=PT_STRING8,0x6601
    Password=PT_STRING8,0x67f0
    RememberPassword=PT_BOOLEAN,0x6606
    ConnectionType=PT_LONG,0x6603
    UseSessionLog=PT_BOOLEAN,0x6604
    SessionLogPath=PT_STRING8,0x6605
    EnableUpload=PT_BOOLEAN,0x6620
    EnableDownload=PT_BOOLEAN,0x6621
    UploadMask=PT_LONG,0x6622
    NetBiosNotification=PT_BOOLEAN,0x6623
    NewMailPollInterval=PT_STRING8,0x6624
    DisplayGalOnly=PT_BOOLEAN,0x6625
    UseHeadersOnLAN=PT_BOOLEAN,0x6630
    UseLocalAdressBookOnLAN=PT_BOOLEAN,0x6631
    UseExternalToHelpDeliverOnLAN=PT_BOOLEAN,0x6632
    UseHeadersOnRAS=PT_BOOLEAN,0x6640
    UseLocalAdressBookOnRAS=PT_BOOLEAN,0x6641
    UseExternalToHelpDeliverOnRAS=PT_BOOLEAN,0x6639
    ConnectOnStartup=PT_BOOLEAN,0x6642
    DisconnectAfterRetrieveHeaders=PT_BOOLEAN,0x6643
    DisconnectAfterRetrieveMail=PT_BOOLEAN,0x6644
    DisconnectOnExit=PT_BOOLEAN,0x6645
    DefaultDialupConnectionName=PT_STRING8,0x6646
    DialupRetryCount=PT_STRING8,0x6648
    DialupRetryDelay=PT_STRING8,0x6649
    [Personal Folders]
    ServiceName=MSPST MS
    Name=PT_STRING8,0x3001
    PathAndFilenameToPersonalFolders=PT_STRING8,0x6700
    RememberPassword=PT_BOOLEAN,0x6701
    EncryptionType=PT_LONG,0x6702
    Password=PT_STRING8,0x6703
    [Unicode Personal Folders]
    ServiceName=MSUPST MS
    Name=PT_UNICODE,0x3001
    PathAndFilenameToPersonalFolders=PT_STRING8,0x6700
    RememberPassword=PT_BOOLEAN,0x6701
    EncryptionType=PT_LONG,0x6702
    Password=PT_STRING8,0x6703
    [Outlook Address Book]
    ServiceName=CONTAB
    [LDAP Directory]
    ServiceName=EMABLT
    ServerName=PT_STRING8,0x6600
    UserName=PT_STRING8,0x6602
    UseSSL=PT_BOOLEAN,0x6613
    UseSPA=PT_BOOLEAN,0x6615
    EnableBrowsing=PT_BOOLEAN,0x6622
    DisplayName=PT_STRING8,0x3001
    ConnectionPort=PT_STRING8,0x6601
    SearchTimeout=PT_STRING8,0x6607
    MaxEntriesReturned=PT_STRING8,0x6608
    SearchBase=PT_STRING8,0x6603
    CheckNames=PT_STRING8,0x6624
    DefaultSearch=PT_LONG,0x6623
    [Microsoft Outlook Client]
    SectionGUID=0a0d020000000000c000000000000046
    FormDirectoryPage=PT_STRING8,0x0270
    WebServicesLocation=PT_STRING8,0x0271
    ComposeWithWebServices=PT_BOOLEAN,0x0272
    PromptWhenUsingWebServices=PT_BOOLEAN,0x0273
    OpenWithWebServices=PT_BOOLEAN,0x0274
    CachedExchangeMode=PT_LONG,0x041f
    CachedExchangeSlowDetect=PT_BOOLEAN,0x0420
    [Personal Address Book]
    ServiceName=MSPST AB
    NameOfPAB=PT_STRING8,0x001e3001
    PathAndFilename=PT_STRING8,0x001e6600
    ShowNamesBy=PT_LONG,0x00036601
    ; Section 7 - Mapping for internet account properties.  DO NOT MODIFY.
    [I_Mail]
    AccountType=POP3
    ;--- POP3 Account Settings ---
    AccountName=PT_UNICODE,0x0002
    DisplayName=PT_UNICODE,0x000B
    EmailAddress=PT_UNICODE,0x000C
    ;--- POP3 Account Settings ---
    POP3Server=PT_UNICODE,0x0100
    POP3UserName=PT_UNICODE,0x0101
    POP3UseSPA=PT_LONG,0x0108
    Organization=PT_UNICODE,0x0107
    ReplyEmailAddress=PT_UNICODE,0x0103
    POP3Port=PT_LONG,0x0104
    POP3UseSSL=PT_LONG,0x0105
    ; --- SMTP Account Settings ---
    SMTPServer=PT_UNICODE,0x0200
    SMTPUseAuth=PT_LONG,0x0203
    SMTPAuthMethod=PT_LONG,0x0208
    SMTPUserName=PT_UNICODE,0x0204
    SMTPUseSPA=PT_LONG,0x0207
    ConnectionType=PT_LONG,0x000F
    ConnectionOID=PT_UNICODE,0x0010
    SMTPPort=PT_LONG,0x0201
    SMTPSecureConnection=PT_LONG,0x020A
    ServerTimeOut=PT_LONG,0x0209
    LeaveOnServer=PT_LONG,0x1000
    [IMAP_I_Mail]
    AccountType=IMAP
    ;--- IMAP Account Settings ---
    AccountName=PT_UNICODE,0x0002
    DisplayName=PT_UNICODE,0x000B
    EmailAddress=PT_UNICODE,0x000C
    ;--- IMAP Account Settings ---
    IMAPServer=PT_UNICODE,0x0100
    IMAPUserName=PT_UNICODE,0x0101
    IMAPUseSPA=PT_LONG,0x0108
    Organization=PT_UNICODE,0x0107
    ReplyEmailAddress=PT_UNICODE,0x0103
    IMAPPort=PT_LONG,0x0104
    IMAPUseSSL=PT_LONG,0x0105
    ; --- SMTP Account Settings ---
    SMTPServer=PT_UNICODE,0x0200
    SMTPUseAuth=PT_LONG,0x0203
    SMTPAuthMethod=PT_LONG,0x0208
    SMTPUserName=PT_UNICODE,0x0204
    SMTPUseSPA=PT_LONG,0x0207
    ConnectionType=PT_LONG,0x000F
    ConnectionOID=PT_UNICODE,0x0010
    SMTPPort=PT_LONG,0x0201
    SMTPSecureConnection=PT_LONG,0x020A
    ServerTimeOut=PT_LONG,0x0209
    CheckNewImap=PT_LONG,0x1100
    RootFolder=PT_UNICODE,0x1101
    [INET_HTTP]
    AccountType=HOTMAIL
    Account=PT_UNICODE,0x0002
    HttpServer=PT_UNICODE,0x0100
    UserName=PT_UNICODE,0x0101
    Organization=PT_UNICODE,0x0107
    UseSPA=PT_LONG,0x0108
    TimeOut=PT_LONG,0x0209
    Reply=PT_UNICODE,0x0103
    EmailAddress=PT_UNICODE,0x000C
    FullName=PT_UNICODE,0x000B
    Connection Type=PT_LONG,0x000F
    ConnectOID=PT_UNICODE,0x0010
    I have changed the home server in [ServiceEGS] and [Service1] with the CAS Array VIP configured with the DNS name
    autodiscoverservices.exchange.xxxx.xx  but it is not working and getting "Exchange server unavailable" error. Some one have any idea how to
    configure the user outlook profile via a prf file which works with exchange server 2013 autodiscover services. Is there any more settings to be applied to the PRF file to make it work.
    [ServiceEGS]
    CachedExchangeConfigFlags=0x00000900
    MailboxName=%UserName%
    HomeServer=autodiscoverservices.exchange.xxxx.xx
    [Service1]
    OverwriteExistingService=No
    UniqueService=Yes
    MailboxName=%UserName%
    HomeServer=autodiscoverservices.exchange.xxxx.xx
    AccountName=Microsoft Exchange Server

    May I ask why you changed the home server to autodiscoverservices.exchange.xxxx.xx?
    Basically, we set it to Microsoft Exchange server address.
    Flynn

  • Save as .avi file settings for television movie

    Can anyone tell me what settings should be used to save a
    .avi file so that it will open correctly in a program such as
    Pinnacle Studio?
    We want to make this into a DVD and it keeps getting
    distorted no matter what we try.
    Thank you

    What resolution is your original Flash movie?
    - B

  • Which display settings for using projector

    Hi Everybody,
    I am using a projector to show a QT movie that is widescreen.
    How do I determine which display setting to use to maintain the wideness if possible. There are so many...
    THe screen is really more of a 4:3 screen. Tallish and vertical.
    Thanks,
    Al

    I use the 16:10 and the 1440 x 900 setting.
    Wonderful to look at... except for some of the creepy looking bad guys.

  • Choosing which sequence settings for multi format

    I have XDCAM EX, Canon DSLR and GOPRO footage: all shot at 1080 30P. Which shoud i choose? Cheers

    You should convert everything a common format and frame rate first.
    Two things to consider:
    What format do you have the most of?
    What will be the output format?

  • FCE export settings for higher quality video

    Hello. I'm a self-schooled newspaper video features producer and relative newcomer to Final Cut Express, shifting from Premium Elements. I've just begun using it to upload videos to my newspaper's finicky web system, which will only accept .flv files of a certain size. My modus operandi has been to export my videos as large .avi files, using Quicktime conversion and DV/DVCPRO/NTSC, with medium quality, with 16 bit sound set at 32 Khz. Then I run that .avi through the Adobe Flash Media Encoder with a frame rate of 15 fps, deinterlacing and resizing the screen to 640 by 480. This procedure (outlined by our former video editor) produces serviceable web quality video (You can see video that results from using these settings at http://wvgazette.com/multimedia). So, two questions: 1) I have created an 8-minute FCE music video for my band and wish to export it at a higher quality (for use on Vimeo) than these newspaper settings. Which of them do I change so that a higher quality video results without waiting all night for a massive file to upload? 2) And wthere might I turn for guidance on better understanding the Sanskrit of FCE video export settings for newbies? Thanks for any help.
    Douglas Eye
    http://hundredmountain.com

    The simplest way to produce good quality video for the internet is:-
    1. File>Export Using QT Conversion.
    2. The "Format" window should say, "QT Movie".
    3. In "Use" select "LAN/Intranet" from the dropdown menu.
    4. Click "Save" and when it has finished encoding, upload it.
    Do not mess about altering audio settings, frame rates etc.
    Using the above settings an 8 minute video would be encoded in around 20 minutes (depending on computer speed) and would be well under 100MB.
    Is that too big?
    Message was edited by: Ian R. Brown

  • Which files actually hold the info & settings for a single Mail Account?

    One of my mail accounts must have gotten corrupted yesterday. Since then I can no longer retrieve mail for this account. This account can still send mail normally. All the other mail accounts on this machine function properly and I can retrieve emails from this account on another Mac.
    I could probably solve the problem by deleting the account and recreating it. However when I had this problem once before and deleted/recreated the account it was a long process to try to import all the old emails (which I want to keep) from my Time Machine backup. At that time I still lost emails because the import kept hanging up at the same point in the process, so I would like to avoid having to go through that again.
    I'm hoping that if I could identify the files that hold all the account specific info I could restore just those files with Time Machine. I'm guessing that if I were to quit Mail, restore those files and then relaunch Mail, everything should be back to the way it was before the files were corrupted.
    Does anyone know if my theory is valid? And, if so, do you know which files I need to replace and where to find them?
    -- Thanks, in advance, for your help!

    Thanks for the response!
    Well, I looked in the location you mentioned (Users/yourname/Library/Mail/nameof_yourpop account) before posting my question, but if you look in that POP folder the only things there are the .mbox files for that account: Deleted Messages.mbox, Drafts.mbox, INBOX.mbox, Junk.mbox & Sent Messages.mbox. Inside each of those are the actual emails for those folders, which would restore all the emails (which I haven't lost), but there doesn't seem to be any files that carry the info/settings for the account.
    I was hoping to find the settings files which must be located somewhere else. Do you have any other suggestions?

  • How the files are decreasing from RBS storage after some time i delete docs from document library, where shld I check the settings for this?

    HI
    I created a web application and configured  rbs storage ,
    I uploaded documents (for ex: 18 number)
     after uploaded  documents ,  and observed the RBS storage folder, number of files are increasing (39 number) , its working fine
    and also  I run the querys to check the rows increasing or not , (when I upload new doc rows are increased its fine also)
    select count(*) from alldocs
    Select count(*) from AllDocstreams
    but when I delete some docs from document library ,
    1)the doc itself deleted from document library
    2)when I check the rbs storage  there is no number of files are decreased(its still 39 files ), its same as  before doc deleted from doc library
    after some time I found the number of files are decreasing from RBS storage folder in sql server,
    here I want to know the how the files are decreasing from RBS storage  after some time, where  shld I check the settings for this? and how I control on it
    here how I know the settings for cleaning up orphan BLBOS how  these deleted BLOB
    adil

    1. WHen you delete the file from Sharepoint, it is still present in Recycle bin. This is a default setting in sharepoint for 30 days. Once files are deleted fro Recycle bin, it can also be delete from RBS
    2. There is a RBS cleanup job which deletes files from RBS. for more info check 
    http://mehuljamod.blogspot.in/2012/09/remote-blob-storage-maintainer-rbs.html

  • What are the settings for datasource and infopackage for flat file loading

    hI
    Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
    pls let me know
    regards
    kumar

    Loading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
    Uploading of Transaction data
    Log on to your SAP
    Transaction code RSA1—LEAD YOU TO MODELLING
    1. Creation of Info Objects
    • In left panel select info object
    • Create info area
    • Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
    • Create new characteristics and key figures under respective catalogs according to the project requirement
    • Create required info objects and Activate.
    2. Creation of Data Source
    • In the left panel select data sources
    • Create application component(AC)
    • Right click AC and create datasource
    • Specify data source name, source system, and data type ( Transaction data )
    • In general tab give short, medium, and long description.
    • In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
    • In proposal tab load example data and verify it.
    • In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
    • Activate data source and read preview data under preview tab.
    • Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
    3. Creation of data targets
    • In left panel select info provider
    • Select created info area and right click to create ODS( Data store object ) or Cube.
    • Specify name fro the ODS or cube and click create
    • From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
    • Click Activate.
    • Right click on ODS or Cube and select create transformation.
    • In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
    • Activate created transformation
    • Create Data transfer process (DTP) by right clicking the master data attributes
    • In extraction tab specify extraction mode ( full)
    • In update tab specify error handling ( request green)
    • Activate DTP and in execute tab click execute button to load data in data targets.
    4. Monitor
    Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
    Loading of master data in BI 7.0:
    For Uploading of master data in BI 7.0
    Log on to your SAP
    Transaction code RSA1—LEAD YOU TO MODELLING
    1. Creation of Info Objects
    • In left panel select info object
    • Create info area
    • Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
    • Create new characteristics and key figures under respective catalogs according to the project requirement
    • Create required info objects and Activate.
    2. Creation of Data Source
    • In the left panel select data sources
    • Create application component(AC)
    • Right click AC and create datasource
    • Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
    • In general tab give short, medium, and long description.
    • In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
    • In proposal tab load example data and verify it.
    • In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
    • Activate data source and read preview data under preview tab.
    • Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
    3. Creation of data targets
    • In left panel select info provider
    • Select created info area and right click to select Insert Characteristics as info provider
    • Select required info object ( Ex : Employee ID)
    • Under that info object select attributes
    • Right click on attributes and select create transformation.
    • In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
    • Activate created transformation
    • Create Data transfer process (DTP) by right clicking the master data attributes
    • In extraction tab specify extraction mode ( full)
    • In update tab specify error handling ( request green)
    • Activate DTP and in execute tab click execute button to load data in data targets.

  • Java WebDynpro's and IE security settings for file download

    We have a EP 7.0 SP13 environment on which we have deployed a number of own developed java webdynpro's. In some of these webdynpro's we provide the file download functionality. The portal and webdynpro's are used by both internal personnel and external customers.
    On the other hand the default Internet security settings for Internet Explorer, disable "Automatic prompting for file downloads".
    When a user, with these default security settings active, tries to use our webdynpro's file download functionality, the screen seems to refreshes but no file download starts. When (s)he retries, the session runs for some minutes and gives following error message:
    "com.sap.tc.webdynpro.services.session.LockException: Thread SAPEngine_Application_Thread[impl:3]_20 failed to acquire exclusive lock on client session ClientSession".
    This behavior is explained in SAPNote 1234847. Webdynpro provides a single-thread module, meaning a user session is blocked for the during of the request. And because the previous file download isn't yet completed the new try can't start.
    Issue now, although the users IE settings allow file downloads and don't block pop up's, he can't download the file and even isn't made aware of the cause of the failure.
    How can we avoid this issue, without having to communicate the
    application requires specific browser settings?

    Welcome to the Apple Support Communities
    See > http://support.apple.com/kb/HT5290
    You can install the program using different ways:
    1. Right-click the application installer and choose Open.
    2. Go to System Preferences > Security and Privacy and select Anywhere in Allow applications downloaded from

Maybe you are looking for