FCE doesn't recognize my HV 20
I have a new Canon HV 20 and FCE doesn't want to drive it.
I tried to capture with iMovie 8 and I worked.
What's wrong with my camcorder ?
Hi, I am also using a Canon HV20 and have figured out how to capture HDV with it. A couple of things that I learned:
1 - The "easy setup" on FCE needs to match the "playback" setting on the camera
2 - I need to follow the directions in the HV20's manual: First turn camera on to "play", then connect Firewire cable to computer, lastly open the application. It recognizes the camera every time, but since there doesn't seem to be any ability to control the deck through the computer, I rewind the tape to the place that I want capture to begin before going through that sequence of steps.
3 - my screen saver coming on during capture was causing the application to "freeze" and capture to cease. So I set screen saver to "never" and haven't had any problems.
Hope this helps.....
CD
Similar Messages
-
FCE Doesn't Recognize My New Cam
Final Cut Express doesn't recognize my new video camera that I just plugged into the computer. Is there a thing I'm supposed to do within FCE to make the camera recognized? Thanks.
You should specify, what camcorder you try to connect. If it is tape based then there should not be any problem, but with AVCHD you can expect difficulties. If it a new Panasonic HDC-SD9 for example then it is practically incompatible with any editing video software. I checked iMovie08, FCE 4 on Intel Mac and Sony Vegas on Windows machine. All programs crashed on import attempt.
BTW, did anyone find solution for SD9 problem except Voltaic conversion? I searched over internet and did not find even single case of successful direct HDC-SD9 files import.
And no, I do not have Perian installed on my Mac.
Thanks for any suggestions. -
FCE doesn't recognize Panasonic VTR
For 1st time i have filmed HDV 1080i on Panasonic HVX 200 P2 card; while trying to capture on FCE,the following message comes: plug-in VTR ,it does not recognizeI have Imac 20'. Can anyone help please?
FCE dos not support DVCPRO HD. This codec is only available with Final Cut Studio.
-
Doesn't recognize AVCHD files!
FCE suddenly doesn't recognize AVCHD files. I've been able to import using Log And Capture before. Now it suddenly doesn't even recognize the files. I dragged them to the desktop and still no luck. What the ****!!???
My issue is with the AVCHD recognition.
Background:
I have been using a card reader and popping the cards in there for import. Have not had any problems with this method up until this point. I have also copied the AVCHD folder to the desktop and imported from there with no issues. Suddenly FCE does not recognize either.
I did a complete reinstall of SL because I have been having a few other issues apart from FCE. I have done this with all previous upgrades of OSX on the advice of most Mac pros. Have not had any issues with those installs. With SL I did the upgrade without the complete reinstall. It seemed to work fine but I started running in to several system quirks. So to take that out of the equation I wiped the drive and did the clean install. So far so good. I back up my system drives at least once a month so I have everything saved.
However... FCE still will not recognize the AVCHD files, either from the card or from the desktop. I will try from the camera via USB.
Thanks again. -
Itunes 10.6 doesn't recognize my iphone 4s 32gb, could you please help me?
I bought an iPhone 4s 32gb from Singapore. I'm living in Chennai, India. To connect it to my computer (windows XP,), I have downloaded iTunes 10.6.1.7. Unfortunately iTunes is not recognizing my iPhone. I had tried to troubleshoot it by reinstalling iTunes (2 times). I have restarted the apple mobile device from control panel. I try connecting my iphone in another usb port. but no use. I don't know what am I missing?. iTunes opens on my computer. but doesn't recognize my device. when I click on help. it says an "unknown error has occurred. your computer is not connected to internet. please check your internet connection and try again later". I don't know what to do? could you please help me? thank you so much for your help and time.
I did the apple's diagnostics test on my computer. I'm pasting the result for your info.
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
System manufacturer System Product Name
iTunes 10.6.1.7
QuickTime not available
FairPlay 1.14.37
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.1.1.4
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0013AC2C0E8DEF50
Current user is an administrator.
The current local date and time is 2012-06-12 20:13:12.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel(R) G41 Express Chipset
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {D85300A1-330D-41ED-AC5A-EC032B22FBF0}
Description: Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller - Packet Scheduler Miniport
IP Address: 192.168.1.3
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Tue Jun 12 19:48:36 2012
Lease Expires: Wed Jun 13 07:48:36 2012
DNS Servers: 192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Basic connection to the store failed.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
iTunes has never successfully accessed the iTunes Store.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
G: Optiarc DVD RW AD-7220A, Rev 1.01
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.6.1.7 is currently running.
iTunesHelper 10.6.1.7 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) N10/ICH7 Family USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.Well, you do not mention what computer OS you are using, so here are the support documents for both.
Windows: http://support.apple.com/kb/TS1538
OS X: http://support.apple.com/kb/TS1591 -
ITunes doesn't recognize either of my iPods
I downloaded the latest update recently and since then iTunes doesn't recognize either of my two iPod touches (4th gen), even though the computer does. My iPad (1st gen) is still recognized normally. I tried uninstalling iTunes and reinstalling it several times, and that didn't work. The iPods are recognized by iTunes on other computers. The computer in question runs windows 8.1, if that makes a difference. From the look of these forums it looks like I'm not the only one who has this problem. Please help.
Hi Tanskalinen,
If you are having issues with iTunes not recognizing some of your devices on your Windows machine, you may find the following article helpful:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
- Brenden -
After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?
Refer to this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538 -
My apple ID and password, recognized through out the Cloud, is not being recognized in the itunes store. I am signed into itunes.When I want to change something in my account, the sign in prompt comes up and doesn't recognize my PW
Solved the problem. I had to allow cookies for safari and it run - as here: Re: itunes keeps asking for my apple id password. it's NOT entered incorrectly.
-
After i plug in my iphone 5s, it always asks me to trust the laptop, i click trust and my laptop makes that noise as if I've pulled my phone out, but i haven't, so now my itunes doesn't recognize my phone, please please help me?
THis also happened with my old iphone 4s
I need help!Hi loist,
Thanks for visiting Apple Support Communities.
If your iPhone is not being recognized by your computer after you click "Trust," the troubleshooting steps found here can help:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jeremy -
Tecra M4 - DVD drive doesn't recognize any disk under Vista
Hi,
after the installation of Vista my dvd drive doesn't recognize any disks !
No upgrade from XP! It was a clean Vista installation.
I found several links about the registry entries upper and lower filter this entries doesn't exist in my registry under the class CDROM.
I tested the drive under XP it works fine and recognizes everything.
Drivers are correctly installed no problems in the device manager is prompted.
So i have no idea how to get it working, seems to be a Vista problem
Could any one help me ? I'm really frustrated about this
Thanks for your helpMaybe this helps:
- Remove the CD/DVD drive from the device manager.
- Then access the registry and remove the Upperfilters and Lowerfilters values completely from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
- Then reboot the notebook
But what happens exactly? What disks are not recognized? -
How do I pair a bluetooth headset when my MAC doesn't recognize it? The hedset work properly because they are paired with my iPhone. The headset is not an Apple product. It'd 3rd party.
Ask the headset manufacturer.
Barry -
I have an early 2008 and mid 2010 13 inch macbook pro running iTunes 10.7. Itunes on both machines doesn't recognize blank cds or allow me to import from a music cd when I insert it.
iTunes does not use the .xml it uses the .itl
If you are sure your old library file migrated across (does the file size and modification dates suggest it has?) start iTunes while holding down the option/alt key and guide it to the .itl file to get it to use that one. -
I went to iCloud and my mail doesn't recognize my password but even worst my iTunes does not want to open because it says my library is blocked somewhere on a hard disk where I have no access ...
HELP HELPTo confirm, your existing mail client isn't communicating with your existing and remote mail services at Dreamhost? Which mail client are you using (Apple mail?), and how is mail on the client set up?
It would initially seem that your client is still referencing the server, either for its inbound or outbound mail. (And I'm not sure how unplugging the server helps here, unless there's some sort of a configuration issue, or a duplicate network address or such.) This would usually be something within the configuration of the mail client.
The Mac OS X Server is significantly easier than the many other servers and server operating systems I've dealt with over the years, but it requires reading the manuals and/or some knowledge of networking and of server environments.
Small shops and home folks without the time or inclination to "spin up" on these server areas can be well-served with some help initially configuring the server. Servers are different from clients. Stuff that you're implicitly used to using when you're running a client -- the DHCP server, for instance -- are what the servers provide you with.
As for Mac OS X Server and particularly if you head outside of the default settings and sequences and off into the customizations, which is what has happened here, you might want to engage some assistance. Not just for the direct and obvious initial set-up sequence, but also for getting you set-up and started with backups and other such tasks. Before you get too deep in here and get too much underway and too much saved on your disks, do seriously consider getting somebody in to help set this box up for you.
Mac OS X Server is not "no IT", but it is rather closer to "less IT" than most. Particularly once you get it configured and running. -
when I plug my iPhone in to my computer, iTunes doesn't recognize it as a device. I have deleted and re-downloaded iTunes twice which seems to fix the problem temporarily but then the next time I plug my phone in, the device is not recognized.
What happens if you go to iTunes > File > Devices, do you get the option to Sync iPhone?
You could try a reinstall of iTunes. OS X Yosemite: Reinstall apps that came with your Mac -
I just updated iTunes to 11.1.4.62 and it doesn't recognize my iPod.
Hello All!
I've just recently updated iTunes to the latest version but it no longer recognizes any of the iPods in my house. It shows up in Windows but for some reason when I open up iTunes, iTunes just doesn't recognize that it's plugged in. I've never had this happen with any past updates, can anyone assist me please?
Thanks in advance.SOLVED:
refer to this forum if in need: https://discussions.apple.com/message/24603547#24603547
Maybe you are looking for
-
Ipod Classic 80 & iTunes 9 syncing of contact and calendars no longer
Itunes 9 doesn't seem to allow my 80 gg ipod classic to sync contacts and calendars. It says I don't have and and would I like to open iCal/Address Book to create some. I did get one notice that itunes no longer syncs contacts on my ipod... it appear
-
In January, I moved into a new apartment and immediately set up a bundle with Verizon. This bundle included: -High Speed Internet -DirecTV My high speed internet works fine, but I've never bothered with DirecTV until now. I have an LG LED-LCD 26",
-
Hi there, I need to activate a timeline event on a symbol with a button press on another object, then when the button is pressed again, reverse the timeline event. This will have something sliding in and out of the stage. If the animation is placed r
-
Do we need to install SAP Portal for implementation of ESS & MSS
Hi All, We are implementing SAP (ECC 6.0) for one of our client, Due to some contractual limitations, we do not want to implement SAP portal though it is a part of standard delivery, I want to know that is it absolutely necessary to install and imple
-
Error in Tax Calculation while Invoice Verificatio
Hi, While doing invoice verification, the excise duties, cess and higher secondary cess show wrong figures. While these are seen correctly in Purchase Orders, their values differ while doing MIRO. I have checked the tax procedure, but everythi