FCE doesn't recognize Panasonic VTR

For 1st time i have filmed HDV 1080i on Panasonic HVX 200 P2 card; while trying to capture on FCE,the following message comes: plug-in VTR ,it does not recognizeI have Imac 20'. Can anyone help please?

FCE dos not support DVCPRO HD. This codec is only available with Final Cut Studio.

Similar Messages

  • MBP doesn't recognize Panasonic HDC-TM900

    My MBP doesn't recognize Panasonic HDC-TM900 videocamera. I tried to connect both devices through an USB cable, but the camera is not recognized by the computer, no trace of the camera in System Profiler or Disk Utility. What should I do to solve this problem? Any tip welcomed.

    It's very possible that the card was not formatted properly inside the camera or you are recording in 1080p60 (or 50) and your editing software does not recognize that format.
    I hope that makes sense

  • FCE Doesn't Recognize My New Cam

    Final Cut Express doesn't recognize my new video camera that I just plugged into the computer. Is there a thing I'm supposed to do within FCE to make the camera recognized? Thanks.

    You should specify, what camcorder you try to connect. If it is tape based then there should not be any problem, but with AVCHD you can expect difficulties. If it a new Panasonic HDC-SD9 for example then it is practically incompatible with any editing video software. I checked iMovie08, FCE 4 on Intel Mac and Sony Vegas on Windows machine. All programs crashed on import attempt.
    BTW, did anyone find solution for SD9 problem except Voltaic conversion? I searched over internet and did not find even single case of successful direct HDC-SD9 files import.
    And no, I do not have Perian installed on my Mac.
    Thanks for any suggestions.

  • FCE doesn't recognize my HV 20

    I have a new Canon HV 20 and FCE doesn't want to drive it.
    I tried to capture with iMovie 8 and I worked.
    What's wrong with my camcorder ?

    Hi, I am also using a Canon HV20 and have figured out how to capture HDV with it. A couple of things that I learned:
    1 - The "easy setup" on FCE needs to match the "playback" setting on the camera
    2 - I need to follow the directions in the HV20's manual: First turn camera on to "play", then connect Firewire cable to computer, lastly open the application. It recognizes the camera every time, but since there doesn't seem to be any ability to control the deck through the computer, I rewind the tape to the place that I want capture to begin before going through that sequence of steps.
    3 - my screen saver coming on during capture was causing the application to "freeze" and capture to cease. So I set screen saver to "never" and haven't had any problems.
    Hope this helps.....
    CD

  • Pro Doesn't recognize Panasonic PV-GS250

    I want to import movies created on my 3-chip Panasonic PV-GS250, but the MBP won't recognize the camcorder. No, it does not have firewire, but surely there must be a way using the USB cable! I don't want to spend hundreds more $$ for a new camera.
    Solution anyone?

    Welcome to the Forums!
    No, it does not have firewire
    Ummmm...it most certainly does!! And the FireWire connection is the best for digital video (USB can drop frames, FireWire won't). Admittedly, it's not called "FireWire" by Panasonic. You'll see terms like DV-Link, IEEE1394, etc. All are FireWire. All you need is a 4-pin-to-6-pin FireWire cable, plug the 4-pin (smaller end) into the camera (the port is marked DV), and the 6-pin end into your Mac. The camcorder should be set to playback mode not PC mode (and *this is important*, since in PC mode iMovie will see the camcorder but give a connection error, but with the camcorder in playback iMovie should detect it and control it - at least, it does for my PV-GS35).

  • FCP doesn't recognize VTR mode on HVX camera

    I'm new to FCP7 and can't figure out why log and capture doesn't recognize the VTR mode on my Panasonic HVX. I turn on the camera, switch it to VTR (by pressing the MCR/VCR button) and the launch FCP with my MBP connected to the camera by FireWire. When I launch L&C and the click on the now button, I get a black screen that says the camera must be in VTR mode. Yet when I launch iMovie, the capture window will play and record the video on the camera just fine. The video is on a miniDV tape. I don't have a P2 card so can't try that method.

    L&C!  Did that work?
    Works for you & I can do it from my MBP, but evidently not from my iPad.  Weird.
    OK...the thing you need to do first in FCP is choose the DV/NTSC Easy Setup. THEN try to capture from tape.
    Yeah, did that first.  I'll try again when I get home tonight.

  • IMovie doesn't recognize my Panasonic v100M camcorder

    iMovie 11 doesn't recognize my Panasonic v100M camcorder. I've done all the steps on another support page (unplugged, plugged it back in, restarted, etc) and nothing.  I even changed the internal video capture setting to iFrame and iMovie (nor does my Macbook Pro) recognize the camera.  HOWEVER, if I save the video to a SanDisck, and plug it in with an adapter, it sees it.  Go figure.  I'm lost here and frustrated because Apple lists this as one of the camera's it's OS is compatable with. Any help, suggestions are more than welcomed.

    Hey Brett...
    Thank you for the link.  I ended up calling Apple that evening. Found out the camera was supported in iMovie '09, but not '11. Go figure. lol. So I reinstalled '09, but haven't checked it yet to see if it was working. They gave me a case number just in case, so we'll see.  :-)
    Totally appreciate the response!  I'll let you know how it goes.

  • When I plug in my panasonic videocamera iMovie doesn't recognize the videocamera (iPhoto does). I did the same operations several times in the past, I don't understand because is not working anymore...please

    I don't understand why iPhoto recognize the pictrures in the videocamera and iMovie doesn't recognize the videos and the videocamera.
    I see all the pictures taken in iPhoto but I can't see any video in iMovie because I don't see the videocamera in iMovie.
    I did the same operation several times in the past and always worked it out, with USB connection, I've tryed to restart the computer, to turn on and off the camera, to change cable, to change MAC: always the same problem!
    Please is anybody so kind to help me ? Thank you!

    hi dlpmaster!
    So, when it updates the program is working but then it sort of freezes. Then unfreezes and then again..
    hmmm. what antivirus applications are you using?
    as an experiment, does the freezing behavior still occur if you disable the antivirus prior to plugging your ipod in?
    love, b

  • IPhoto '09 doesn't recognize my Lumix DMC-ZS3

    iPhoto '09 doesn't recognize my new camera, a Lumix DMC-ZS3. It pops up on iPhoto as "NO NAME". I am able to import photos from it without a problem, although I have not done any videos yet, so I'm hoping this won't be an issue.
    Anyone else having a similar experience with their Lumix?
    Any way to get rid of "NO NAME" and get iPhoto to recognize the camera model?
    Any advice/tips about using this camera with iPhoto?
    Thanks.

    I am having the same problem with my new Panasonic ZS3. I am able to import pictures through iPhoto, but when I open iMovie ('09) and sync up the camera a dialogue box pops us saying "Looking for Cameras and Devices" and below it says Panasonic DMC-ZS3 (seemingly recognizing the camera). This runs for about 30 seconds and then it disappears (apparently never fully recognizing the camera). It never pulls up a screen with the videos on the camera available to be downloaded. After this dialogue box runs, I have tried clicking on the camera button on the toolbar and it says "No camera connected-to import video please select a camera". The Lumix has the option of shooting HD video in either AVCHD or Motion JPEG. I shot several videos in the AVCHD (which I thought iMovie would support) but they are not coming up! I am going crazy trying to figure this out. Any help would be greatly appreciated.
    Thanks

  • Thinkpad A31p doesn't recognize HDD

    Hello, I'm new to the form.
    A friend has this Thinkpad A31p with no HDD. He got a new WD-120gb ATA-6 from Newegg. We don't know if this drive is compatible. He wants to install XP on it but the computer doesn't recognize it. He doing this from scratch. Any ideas.
    Thanks

    Here you go:
    http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=180347070612&viewitem=&salenotsupported
    BTW, I am NOT affiliated with the seller in any way.
    Hope this helps.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • Doesn't recognize AVCHD files!

    FCE suddenly doesn't recognize AVCHD files. I've been able to import using Log And Capture before. Now it suddenly doesn't even recognize the files. I dragged them to the desktop and still no luck. What the ****!!???

    My issue is with the AVCHD recognition.
    Background:
    I have been using a card reader and popping the cards in there for import. Have not had any problems with this method up until this point. I have also copied the AVCHD folder to the desktop and imported from there with no issues. Suddenly FCE does not recognize either.
    I did a complete reinstall of SL because I have been having a few other issues apart from FCE. I have done this with all previous upgrades of OSX on the advice of most Mac pros. Have not had any issues with those installs. With SL I did the upgrade without the complete reinstall. It seemed to work fine but I started running in to several system quirks. So to take that out of the equation I wiped the drive and did the clean install. So far so good. I back up my system drives at least once a month so I have everything saved.
    However... FCE still will not recognize the AVCHD files, either from the card or from the desktop. I will try from the camera via USB.
    Thanks again.

  • Itunes 10.6 doesn't recognize my iphone 4s 32gb, could you please help me?

    I bought an iPhone 4s 32gb from Singapore. I'm living in Chennai, India. To connect it to my computer (windows XP,), I have downloaded iTunes 10.6.1.7. Unfortunately iTunes is not recognizing my iPhone.  I had tried to troubleshoot it by reinstalling iTunes (2 times). I have restarted the apple mobile device from control panel. I try connecting my iphone in another usb port. but no use. I don't know what am I missing?.  iTunes opens on my computer. but doesn't recognize my device. when I click on help. it says an "unknown error has occurred. your computer is not connected to internet. please check your internet connection and try again later". I don't know what to do? could you please help me? thank you so much for your help and time.
    I did the apple's diagnostics test on my computer. I'm pasting the result for your info.
    Microsoft Windows XP Professional Service Pack 3 (Build 2600)
    System manufacturer System Product Name
    iTunes 10.6.1.7
    QuickTime not available
    FairPlay 1.14.37
    Apple Application Support 2.1.7
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 5.1.1.4
    Apple Mobile Device Driver not found.
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.5.502
    Gracenote MusicID 1.9.5.115
    Gracenote Submit 1.9.5.143
    Gracenote DSP 1.9.5.45
    iTunes Serial Number 0013AC2C0E8DEF50
    Current user is an administrator.
    The current local date and time is 2012-06-12 20:13:12.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    Intel(R) G41 Express Chipset
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:        {D85300A1-330D-41ED-AC5A-EC032B22FBF0}
    Description:            Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller - Packet Scheduler Miniport
    IP Address:             192.168.1.3
    Subnet Mask:          255.255.255.0
    Default Gateway:    192.168.1.1
    DHCP Enabled:      Yes
    DHCP Server:         192.168.1.1
    Lease Obtained:     Tue Jun 12 19:48:36 2012
    Lease Expires:       Wed Jun 13 07:48:36 2012
    DNS Servers:         192.168.1.1
    Active Connection: LAN Connection
    Connected:             Yes
    Online:                    Yes
    Using Modem:        No
    Using LAN:             Yes
    Using Proxy:           No
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was unsuccessful.
    The network connection timed out.
    Basic connection to the store failed.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    The network connection timed out.
    iTunes has never successfully accessed the iTunes Store.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.2.0.1),
    G: Optiarc DVD RW AD-7220A, Rev 1.01
    Drive is empty.
    **** Device Connectivity Tests ****
    iPodService 10.6.1.7 is currently running.
    iTunesHelper 10.6.1.7 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C8.  Device is working properly.
    Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C9.  Device is working properly.
    Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CA.  Device is working properly.
    Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CB.  Device is working properly.
    Intel(R) N10/ICH7 Family USB2 Enhanced Host Controller - 27CC.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

    Well, you do not mention what computer OS you are using, so here are the support documents for both.
    Windows:     http://support.apple.com/kb/TS1538
    OS X:     http://support.apple.com/kb/TS1591

  • ITunes doesn't recognize either of my iPods

    I downloaded the latest update recently and since then iTunes doesn't recognize either of my two iPod touches (4th gen), even though the computer does. My iPad (1st gen) is still recognized normally. I tried uninstalling iTunes and reinstalling it several times, and that didn't work. The iPods are recognized by iTunes on other computers. The computer in question runs windows 8.1, if that makes a difference. From the look of these forums it looks like I'm not the only one who has this problem. Please help.

    Hi Tanskalinen,
    If you are having issues with iTunes not recognizing some of your devices on your Windows machine, you may find the following article helpful:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Regards,
    - Brenden

  • After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

    After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • My apple ID and password, recognized through out the Cloud, is not being recognized in the itunes store. I am signed into itunes.When I want to change something in my account, the sign in prompt comes up and doesn't recognize my PW

    My apple ID and password, recognized through out the Cloud, is not being recognized in the itunes store. I am signed into itunes.When I want to change something in my account, the sign in prompt comes up and doesn't recognize my PW

    Solved the problem. I had to allow cookies for safari and it run - as here: Re: itunes keeps asking for my apple id password. it's NOT entered incorrectly.

Maybe you are looking for