"FCE etc. would like to accept incoming communications" messages since OS X 10.6.8

Since updating to OS X 10.6.8 I occasionally get messages asking if the app I am just opening can have permission to accept incoming messages. (This is nothing to do with Little Snitch).
The message says that it will help the app perform better . . . . I can't remember the exact wording.
Has anyone got any information on this phenomenon?
I inadvertently clicked OK this morning and would like to know how to get rid of that permission.

I have just received another one and had the presence of mind to take a screenshot!
Apparently I can turn off any granted permissions in Advanced section of the Security Pane, which I have done.
So that bit is solved but I still don't know why these messages seem to have just started in the last few weeks.
The only thing I can think of is that I updated to 10.6.7 and then 10.6.8.

Similar Messages

  • I am having trouble finding the Accept button for my licensing agreement and would like to accept.

    I am having trouble finding the Aceept button for my licensing agreement and would like to accept.

    Well, it's probably below the table... Sounds like you didn't consider the system requirements and installed on a system with too small screen resolution. If so, only using a larger res may possibly revela the magic button...
    Mylenium

  • I would like to accept cookies from pre-set websites only

    I would like to accept cookies from pre-set websites only. In the other cases ask me. How can I do it?

    Hi twozok,
    see if this is helpful : [https://addons.mozilla.org/en-us/firefox/addon/cookie-controller/?src=search Cookie Controller add-on]
    thank you

  • I have an Iphone 4S and I would like to print my text messages, including the thread and the Imessage date and time stamps.  How would I do this?

    I have an Iphone 4S and I would like to print my text messages, including the thread and the Imessage date and time stamps.  How would I do this?

    settings - message - imessage - OFF

  • I recently bought an iphone and would like to save witten text messages from blackberry to my new iphone..how can i do that??

    I recently bought an iphone and would like to save witten text messages from blackberry to my new iphone..how can i do that??

    You can't.
    The iPhone stores text messages in conversation format for starters.

  • I would like to send a text message to a cell phone when certain alarms occur.

    I would like to send a text message to a cell phone when certain alarms occur.
    I have read some of the other post which don't give a straight forward answer on how to accomplish this task.  Also the newest post on this topic is from 2005.  I'm sure things have changed since then.
    Please help me with a step by step solution.
    Thanks for your help!

    You may use U.C.ME-OPC to send text messages to any cell phone. You may use a cellular modem that is connects to a serial COM port. In addition you may send an email that will be received as an SMS or eamil. If you use a cellular modem you may also send commands (for example: change or query values) from your cell phone to Lookout through U.C.ME-OPC.
    U.C.ME-OPC connects to Lookout using OPC or DDE.  
    To learn more visit Control-See web site at www.controlsee.com .

  • I would like to ask a few things since i`m new with java

    i would like to know if anyone can help me with a few things:
    1)With which method does java get the ip address of the web user that visits the web page in which my applet will be posted?
    2)Does java include charts like the ones excel does?Specificly does java include the pie chart?
    3)How difficult is it to connect a database with my applet?
    4)Can i store applets in a database?

    i would like to know if anyone can help me with a few
    things:
    1)With which method does java get the ip address of
    the web user that visits the web page in which my
    applet will be posted?it can't
    2)Does java include charts like the ones excel
    does? Specificly does java include the pie chart?You can use JChart, FreeChart or Graphics.drawArc() to do your own
    3)How difficult is it to connect a database with my
    applet?In a word: tricky
    4)Can i store applets in a database? What?!?
    I think you need to do a crash course in JSP/Servlets, by the sounds of things you're about to embark on a whole heap of frustration if you use applets for this. Step one in any project, get the right tool for the right job

  • HT201269 I would like to sync my text messages from my iphone 4 to my iphone 5c. I was able to sync everything else but my message, how can I go about doing this?

          I would like to sync my messages from my iphone 4 to my Iphone 5c. I was able to sync everything but my text messages. Im trying to figure out how to go about doing this.

    I think this is what you're looking for.
    To use Continuity for SMS and MMS with your iPhone and your Mac, iPad or iPod touch
    Your iPhone, iPad, and iPod touch need to use iOS 8.1, and your Mac needs to use OS X Yosemite.
    Sign in to iMessage on your iPhone, your other iOS devices, and your Mac using the same Apple ID.
    On your iPhone:
    Go to Settings > Messages > Send & Receive > You Can Be Reached By, and add a check to both your phone number and email address.
    Go to Messages > Text Message Forwarding, and enable the device(s) you would like to forward messages to.
    Your Mac, iPad, or iPod touch will display a code. Enter this code on your iPhone to verify the SMS feature.
    From this article.
    Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support

  • I would like to reset my time capsule since there are old files which I don't need any more. How should I do it?

    Everything is working fine, I just would like to delete the old files and buck up the new one.
    What steps should I take?

    This will make it fresh-from-the-factory clean.
    If the AirPort Base Station or Time Capsule isn't accessible from AirPort Utility, the Factory Default reset can be accomplished by using the reset button.
    1. Unplug the AirPort Base Station or Time Capsule from power.
    2. Press and hold the reset button with a pen or pencil, then plug the AirPort Base Station or Time Capsule back in while continuing to hold the button until you see the light (LED) flash rapidly. This should happen after a few seconds.
    3. Release the button. This will factory default reset the AirPort Base Station or Time Capsule.
    http://support.apple.com/kb/ht3728
    I'm not sure if that affects files on AirDisk, but you can easily erase the disk in AirPort Utility after you do the above reset.

  • I got into a support community re: os 5.1 and would like to get out of it since I get continual posts. How do I do this?

    How can I get out of a support community. I posted once and now receive several posts day.

    Do you see the Actions box at the top of your topic on the right? See the first option? Go to the forum in question. That first option will read "Stop email notifications." Click the link and that will terminate the email notifications for that topic.
    In your personal profile you can make specific changes to how or if you will receive notifications, but I would leave them alone. Use the above to control whether you will receive notifications on a topic by topic level.

  • Would like to change my security questions since i don't know the answers

    i recently added a new gmail address, changed ITunes e-mail to new one, made a new password. have been getting prompts via the old address, but it will not accept the old password associated with that e-mail. can't get in. can't figure out how to explain this to ITunes. i think i have made progress, but when making changes on my account details, saw that the security questions do not instantly call up answers i know.  want to change my security questions. HOW?

    iCloud is insisting i sign in under my old id but i added that id to the new id under the new password:  So irritating that it won't sync them between my macbook and my ipad!

  • HT1296 I would like to store my text messages from my iphone on my computer...can it be done and if so how?

    Hi as a newbee to the world of apple i need your help.
    I want to transfer text messages (not pictures) to keep a records of what has been sent to me...time, date, content.  Is there a easy way of sync this infomation to record and store it???? if so hows it done????
    cheers
    B

    thanks that just the trick...is there a free app????
    if not i'll get this
    cheers
    B

  • Would like to remove pop-up message stating when remote content has been blocked.

    The message appears as: "To protect your privacy, Thunderbird has blocked remote content on this page [Options] X". It can be closed but comes up every time I open an E-mail. I don't want to stop disabling remote content, but I do want to stop this message appearing as it makes the little screen space I have for reading E-mails even smaller.

    You could opt to read emails in 'Simple HTML' or 'Plain Text'.
    View > Message Body As > Simple HTML

  • IMessages not accepting SMS text message since an update

    I upgraded to the latest version of Yosemite, 10.10.2 and ever since then my imessages account has stopped sending/receiving SMS text messages and shows them as pink/red

    Hi,
    Have you tried resetting the option of the iPhone so it causes a New code number to appear on the Mac ?
    Repeat the setting if you don't see a code number straight away.
    9:29 pm      Tuesday; March 3, 2015
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Would like to disable HTTP and use only HTTPS yet I get side effects

    Hello,
    I have established a secure connection between the AS ABAP and AS Java.
    I would like assure that all communication between the servers is using https and for that, as a test, I have deactivated the http service using SMICM transaction.
    The only side effect I could recognize so far is that the Web Dynpro for ABAP stuff doesn't work through transaction SE80, the working area simply doesn't come up. If I activate HTTP again it is working.
    Am I doing the right thing by disabling HTTP completely and if yes, what else do I need to do in order to prevent this side effect from happening?
    Roy

    humuhumunukunukuapuaa wrote:
    If I get some nice approvals on my app spree in 10 days, I would like to close Talbots and Abercrombie and Fitch store cards. Total CL for the 2 is $2,700 ($1,350 each)  but I can make up for that closure and utilization loss by getting quite a bit more than those amounts on majors during my app spree. Talbots has only been open 4 months, A&F one year. I have other cards that are the same age or older so should not majorly affect AaoA. Thoughts? I know some will say don't close cards, but they're store cards and I don't need to be responsible for store cards I don't use.If you have no use for them and don't foresee using them in the future then you should probably close them out.  They won't affect your AAoA as the cards will stay in your reports for 10 years.  No sense in keeping cards that you don't want just to take up room in your sock drawer.

Maybe you are looking for

  • Maximum Time Exceed.

    Hi Guru's, I executed the MB5B report for finding the opening and closing stock providing the Material, Plant, Company code, Posting date but it took long execution time and ended in 'Maximum Time Exceed'.. I also tried in Background but the job didn

  • Macbook pro 13-inch mid 2012 manual

    I can not locate the manual for my MacBook Pro 13-inch mid 2012 - Which mnual shuld I use if there is none.

  • Oracle streams configuration

    Hi, Our organization is planning to implement Oracle streams. I have couple of fundamental questions: 1. Can you configure Oracle Streams while the source database is up and running? 2. I think the answer is yes, but please confirm that the LCR data

  • Approval for creating users in an organization

    Hi, We have a requirement where approval is required for creating users in Organisation X. Also, the admin has to fill in a field SSN before approving the request. We have implemented this by changing the approval form. But the admin can still approv

  • OWSM Policy in OSB

    I am trying to build a sample OSB service having the OWSM policy attached to it.I am using the option of "From OWSM Policy Store " and used the policy oracle/wss_username_token_service_policy. When i tried to exceute the OSB,i am getting an error as