FCE Express is writing render files to startup disk not external hard drive

Hi
I'm using FCE Express HD 3.5.1, with a MacBook Pro 2.4 GHz Intel Core 2 Duo, with 2 GB memory.
I'm using a Lacie big disk extreme as my scratch disk, and FCE is set up to write all render files to this. However, I noticed that my startup disk was becoming full and realised that FCE is writing render files to the startup disk not the external hard drive.
I've quit, shut down, etc...
Any ideas what is going on?
Many thanks
Helen

Whenever FCE is behaving strangely, one thing to try is trashing the preferences. Here's how:
http://www.fcpbook.com/Misc1.html

Similar Messages

Do macs keep a record of what files are copied to an external hard drive?

Is it possible to set up a MacBook to keep a record of what files are copied to an external hard drive?

Start up in safe mode and log in to the account with the problem. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode.
Safe mode is much slower to start up and run than normal. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
You may now be able to log in and move the files off the Desktop. Then restart as usual.

Hi! I have a WD my book external hard drive plugged into my imac and I want to share it over my network with my apple tv. I went into system preferences sharing, checked "file sharing" and added my external hard drive to the shared folder. So now it is

Hi!
I have a WD my book external hard drive plugged into my imac and I want to share it over my network with my apple tv. I went into system preferences > sharing, checked "file sharing" and added my external hard drive to the shared folder. So now it is listed in "shared folders" but under "users" everything is grayed out (it says "read and write" for "everyone" - but "read and write" is grayed out, and it doesn't let me add or subtract users). Now I can access all of the folders I shared from my imac except for the externalhard drive. What's going on?

Hi RRFS!,thanks for help.I forgot to tell that hard drive has 2 partitions 1:format :Mac OS Extended (Journaled) and that works properly,2:format:MS-DOS (FAT32) and when i "get info" for both :first has shering & permitions:You can read and write - with name and privilege, second has shaing & prermissions:You can read and write- without name and privilege

Does file vault effect using a external hard drive as back up

does file vault effect using a external hard drive as back up

weird_glasses wrote:
... as you can guess Im still on L plates ...

Why can't I drag my files in finder to an external hard drive?

I'm trying to drag my files from finder to an external hard drive--I just get the universal "do not" symbol. How do I do this?

1.youd need a program like PARAGON to write to a NTFS drive from your Mac.
2. IF you can offload that data onto your PC or other computer, THEN format same in Mac OSX extended journaled, you can just drag and drop files to it.
3. To show the HD on desktop go to Finder > preferences > General > check on "external disks" and "hard disks"
4. The "EASY" option really is to get another HD for use with your Mac, unless of course you need specific files off that drive ON your Mac.
$70 for a good cheap quality 1TB external USB HD.
5. FAT32 and (better option>) EXFAT can read/write to BOTH Mac and PC (however time machine will not use either)
6. See mac format below, HFS+ i.e. "mac osx extended journaled"
FORMAT TYPES
FAT32 (File Allocation Table)
Read/Write FAT32 from both native Windows and native Mac OS X.
Maximum file size: 4GB.
Maximum volume size: 2TB
You can use this format if you share the drive between Mac OS X and Windows computers and have no files larger than 4GB.
NTFS (Windows NT File System)
Read/Write NTFS from native Windows.
Read only NTFS from native Mac OS X
To Read/Write/Format NTFS from Mac OS X, here are some alternatives:
For Mac OS X 10.4 or later (32 or 64-bit), install Paragon (approx $20) (Best Choice for Lion)
Native NTFS support can be enabled in Snow Leopard and Lion, but is not advisable, due to instability.
AirPort Extreme (802.11n) and Time Capsule do not support NTFS
Maximum file size: 16 TB
Maximum volume size: 256TB
You can use this format if you routinely share a drive with multiple Windows systems.
HFS+ ((((MAC FORMAT)))) (Hierarchical File System, a.k.a. Mac OS Extended (Journaled) Don't use case-sensitive)
Read/Write HFS+ from native Mac OS X
Required for Time Machine or Carbon Copy Cloner or SuperDuper! backups of Mac internal hard drive.
To Read HFS+ (but not Write) from Windows, Install HFSExplorer
Maximum file size: 8EiB
Maximum volume size: 8EiB
You can use this format if you only use the drive with Mac OS X, or use it for backups of your Mac OS X internal drive, or if you only share it with one Windows PC (with MacDrive installed on the PC)
EXFAT (FAT64)
Supported in Mac OS X only in 10.6.5 or later.
Not all Windows versions support exFAT.
exFAT (Extended File Allocation Table)
AirPort Extreme (802.11n) and Time Capsule do not support exFAT
Maximum file size: 16 EiB
Maximum volume size: 64 ZiB
You can use this format if it is supported by all computers with which you intend to share the drive. See "disadvantages" for details.

Can I bring files from a NTFS formatted external hard drive (from Windows XP 32 bit desktop) to my new macbook pro retina?

Can I bring files from a NTFS formatted external hard drive (from Windows XP 32 bit desktop) to my new macbook pro retina?

What are these files you are trying to copy over?
If they are program specific and there is no program on a Mac to read them then you'll have to find either a Mac version of that program or one that does the same thing and can read those files.
The file extension should not change just because you connect a NTFS formatted drive to a Mac computer. A Word Document is still a .doc/.docx ad the same for all other office type programs. Music files with an extension of .MP3, or whatever, should read the same on both system. Same goes for all other files like images with a .JPG extension.
Yes I would network them.
I would not use Migration Assistant. There is nothing on your Windows PC that can be used on the Mac other than your personal data files. No programs or settings can be carried over from Windows to OS X.
marimbapony1 wrote:
Also, when I view the files from the external hard drive, they show up as .nbz and are not recognized by any program on the Mac. Should I just abandon the hard drive option and start sharing files through the LAN approach?

Will a Mac automatically delete files/videos/pictures from an external hard drive?

I plugged in one of my external hard drives that contained documents, photos, and videos formatted from Windows. When I plugged it into my MacBook none of my files were on the external hard drive and I didn't see any prompts asking if I wanted to reformat my hard drive so I'm not sure if it was automatically deleted. Will a MacBook automatically delete files, pictures, videos from an external hard drive?

No.
What format is the external drive?

Slow file access-Elements 12: I store all my photo files (".nef" RAW files) in a RAID 1 external hard drive, which the Elements Organizer links to the reference thumbnails. Over some time - say, the past year, and especially recently, the time to bring

One further bit of information: I did recently run a "disc scan", in case there were file system errors, then ran defragmentation -- on the external drive. This did not solve the problem.

I think I'll deal with your different questions in several posts, it'll be easier for me.
josephunit2n a écrit:
A few comments: recently, for the first time, I did a full "backup catalog" routine (with external RAID storage connected) to a second external usb drive, which ran successfully (done, at the time, over longstanding concern that even the RAID 1 storage was not enough data security - as you have mentioned).
Good thing, and it's not really a surprise for me, I would have expected no slow down in a process which only reads your RAID drive data.
One big concern: in all transactions (backup catalog; move to external storage) I always ignore the "reconnect missing files" dialogue. This is due to past experience. Long ago, when I ran it routinely, it was a disaster. At first, I thought I might reconnect a few randomly missing files. While this was so long ago I cannot recall all details, everything went to hell. Even after manually locating a "missing" file, the "reconnect" never worked. The number of "missing" files skyrocketed, far out of any realistic number. Even with Adobe phone support (which is critical for such an application - and must be made available again, I have no problem paying for it), the catalog was hopelessly corrupt, and I manually built a new catalog, file-by-file. Adobe advice then: NEVER USE "RECONNECT MISSING FILES", which I have followed religiously (while also trying to be meticulous in my transactions, not to ever create any "missing" files).
I have never read Adobe advising to never reconnect missing files. Maybe it's not the best course in all circumstances, but I don't see a possible problem there. What is recommended by Adobe is to always reconnect files before doing a backup... Now, my own experience is that if you don't reconnect before a backup you get a restoration where the catalog still points to missing files and where those missing files have not been backed up, totally logical. I would not consider this question as a BIG concern.
. Finally, "just for fun", moments ago I connected the RAID storage drive, opened the organizer, and randomly opened a few images in "full screen" view - then opened a scattered group of 4 or 5 images -- and, they all came up promptly!!!!! So, this "slow access" problem isn't consistent, all the time. Also, I must comment, your advice to avoid the RAID 1 external usb drive, for future catalog storage, seems "tech superstition", which I will not harshly criticize, as I also have my own technology irrational superstitions. I believe the computer "sees" this drive no differently than any other external, usb, drive.
There's a difference between 'technology irrational superstition' and 'reasonable doubt due to ignorance' ... Understanding the problems which may arise when using a RAID drive array supposes understanding of:
- how the organizer catalog recognizes any drive in its database. That's ok for me, but I have no personal experience of such systems. What I can tell you is that most of the problems I have seen with RAID systems were of that kind.
- How efficiently the organizer deals with the OS when using a catalog stored on the main drive, with adequate RAM and scratch disk space while the files themselves are on the external RAID drive. Some organizing tasks imply writing to the files themselves. The xmp sidecar files (very small) are stored together with their raw parent. The thumbnails are stored in a database in the catalog folder...
- How the organizer works with the OS (the APIs) and the particular disk driver. (I am totally ignorant, but I have seen similar problems for other Adobe applications in the feedback forum).
... As I said, I have to leave for a moment...
To be continued!

Is it possible to use backup files previously copied to an external hard drive to backup an iPhone?

My sister froze her iPhone by trying to turn it off during a software update (not sure why) and restored it because she thought it would fix it. Unfortunately she unintentionally deleted all of her data and settings. She doesn't use iCloud, so I'm assuming all her files are backed up to her computer when she syncs her iPhone, but using iTunes I can only find two backup points using Edit>Preferences>Devices, both in the past few minutes. I know that each sync overrides the last backup files instead of creating newer ones, so apparently older backup files from her computer can't be used to recover her data. However, we both periodically use an external hard drive to back up our computers by basically dragging and dropping our files onto it, so there is an earlier version of her User folder on the external hard drive. It would definitely be preferable to use the backup files from a few months ago that are on the external hard drive and lose a few photos than to lose years of data, so would it be possible to direct iTunes to those backup files (AppData etc) instead of the ones saved on her computer hard drive? There's not any kind of browse option I can see that could allow me to get iTunes to search for backup files on the external hard drive and I'm not computer savvy enough to manually find the files and connect them to iTunes. Is it even possible to use backup files from an external hard drive? Do I have to replace the ones that exist on her computer now?

Garageband can't use VST plugins.
If you're talking about AUs: you could try to put an alias into the HD/Library/Audio/Plug-Ins/Components folder instead of the actual files, and see if GB loads them.

2 computers at home working with the same files i keep on an external hard drive to free up space the internal drives. I have an airport extreme time capsule to back up both computers. how can i get it to back up the hard drive plugged into time capsual?

I want to run both my macbook pro and imac from a single external hard drive.
i bought a time capsual and set it us as my network and plugged my external hard drive into it. so now both my computers can access it and work on the same image and film files. the time capsual does a lovely job of backing up both my computers and my wifes. but i cant get it to back up the external hard drive that is conected to it. ive looked on the forum and it seems to me that its not possible, which seems odd to me that mac would enable you to plug a hard drive into the time capsual but not let you back it up, what is the point in that!?
so my question is can i back up the external hard drive with time machine, and if not how do i set up my home network so that all my computers can access the same files and time machine will back everything up?
I did the upgrade to maverics on my imac which has caused me a major headache as now all my apature albums have been updated to 3.5.1 but my macbook pro can no longer open them because im unable to upgade it to maverics, but thats another story.
If anyone can help me with my time machine issue i would be very greatful.
many thanks

i cant get it to back up the external hard drive that is conected to it. ive looked on the forum and it seems to me that its not possible, which seems odd to me that mac would enable you to plug a hard drive into the time capsual but not let you back it up, what is the point in that!?
so my question is can i back up the external hard drive with time machine, and if not how do i set up my home network so that all my computers can access the same files and time machine will back everything up?
The TC for whatever it is promoted as,, is still a simple hard disk in a router. It was designed for laptops to use as a backup. A desktop can use a USB drive, faster cheaper and more reliable than a network drive but the laptops need a network wireless storage. Hence the TC. It is NOT nor was it ever designed to do the job you are trying to use it for.. it is not a NAS.. it has no internal backup.
What is more Time Machine has no ability to backup network drives no matter what their format.
So the solution is to either use a real backup software.. eg Carbon Copy Cloner which can do far more than TM can or ever will. It is around $40 so hardly expensive. But since the TC was never designed for it, this will be slow.. and the next question is where are you going to back to. Using the TC as backup location for your files is less than great. Primarily because all your files are still on the same device albeit on different disk. It is also because mixing data and TM backups is not so great. The TC cannot be partitioned although you can alleviate some of the issues..
See this info.
Q3 here http://pondini.org/TM/Time_Capsule.html
Let me go back to the question.
so my question is can i back up the external hard drive with time machine, and if not how do i set up my home network so that all my computers can access the same files and time machine will back everything up?
Fundamentally the TC is the wrong place to do this.
The right place is to plug the USB drive into the iMac.. since it is a desktop machine and you are probably not lugging it around. Simply share the USB drive to the network.
The MBP can then access the USB drive, and it will be around twice the speed of networking to the same drive on the TC. TM on the iMac can then also backup the USB drive to the TC as part of the normal TM backups.
The only thing is the iMac needs to be turned on to allow MBP access.

Can i use windows migration assistant to transfer files from my windows formatted external hard drive to my mac?

I have a windows formatted external hard drive and a macbook pro. I was wondering if i could use the windows migration assistant to transfer files from my external hard drive to the mac

No.
Just connect the drive to your Mac. The Mac can read most Windows formats (it cannot WRITE Windows New Technology File System (NTFS) formatted drives.

Moving Garageband Music Files to MyBook for Mac External Hard Drive on OSX 10.5.8 I'm a musician and need to make space on my mac hd. Is it safe to move music files there and delete them on the mac? Thanks!

use a MyBook for Mac external hard drive.
I need space on garageband or the entire hard drive, since I am getting the "need space on the hard drive" messages.
It's scary to move my precious music files!
How should I move them to the external and feel safe about doing so?
Or are there other methods besides the obvious, clearing caches, deleting the trash and downloads, etc., that are recommended?
I am doing music now and producers are waiting for the new vocals!
Help!
Thanks!

The process is as simple as just copying your Garageband project to the external drive and deleting from the macs hard drive. But before you delete anything you really need to back them up to someplace else also. Having just one copy is not safe. Get another external drive, DVDs or even flash drives, you absolutely need anything important in more then one place.

I'm not able to save any files on an none apple external hard drive, what can i do to make it work?

I bought a omega 320GB external hard drive so a friend could save the files off an old windows laptop i had but now when i try and open the files on my mac, it doesn't let me. i'm also not able to save any file on to this hard drive either! can some one please help me?

The drive has the NTFS format, which the Mac OS can read but can't write to. Copy the files from the external drive onto your Mac, then reformat the external drive using Disk Utility, creating a Mac OS Extended volume and using the GUID partition scheme. Then you'll be able to write to the drive. Note that reformatting erases everything from the drive, so don't do it until after you've saved the drive's contents to other media.

IMovie Hangs on startup if my external hard drive is switched on.

Hi guys & girls,
I'm new here and also new to Macs in general so be gentle!
I bought my system back in April and have been running iMovie '08 quite happily, using my external hard drive to store the iMovie events. Anyway, within the last week iMovie started to hang whenever I start it up - it just sits there with no change, even after half an hour so I end up having to 'force quit' it.
I re-installed iMovie from my OS X disks and it didn't make any difference, however I've noticed that if I copy the event I want to use across to my internal hard drive then switch off my external drive before launching iMovie then it works OK.
The only thing I can can think of that I've changed recently is that I installed Skype and also a demo version of 'iStopmotion', which has since expired. Could these have caused this to happen or is it likely to be a co-incidence?
My external hard drive is a 300GB Lacie d2 Quadra, using a USB connection as I wanted to keep the firewire port free for my camcorder. I currently have 106GB available on the external hard drive.
-james

Welcome kultofkylie to the  iMovie boards..
+re-installing is a habitual ritual on inferior systems+ ..
stop doing that on Unix based OS' as MacOsX.. it can 'confuse' the file structure..
there are other procedures to give an app a 'slapp on backhead' ..
to clear the fog..
external harddrive is formatted to MacOs/hfs?
did Skype install any 'codecs'? have a look in your /Library/Quicktime folder.. what plug-isn are listed there...? e.g. older perian.org plug.ins keep iM from working correctly..
did you copy your Event via Finder or within iM08?
did you try to trash the .plist?
sorry for long list of Qs, but you did a lot, you shouldn't..

Original files and catalog on same external hard drive?

I am about to install Lightroom 3. I have read alot about creating catalogs. In order to get ready for the installation I am organizing all my photos in folders by year and putting them on ONE external hard drive. This requires a lot of effort to copy them from many different locations: a second external hard drive and from the desktop of my computer hard drive. I am on a Mac running Snow Leopard. Is it a good idea or doesn't it matter or is is wrong to have all my photos and the one catalog I will create on the same hard drive. What I'm asking is: should the catalog AND the original files be on the same hard drive or doesn't it matter. Thanks.

I am about to install Lightroom 3. I have read alot about creating catalogs. In order to get ready for the installation I am organizing all my photos in folders by year and putting them on ONE external hard drive.
Completely unnecessary, but if it makes you happy, go ahead.
If your photos come from a digital camera (and not a scanner), then Lightroom will give you the ability to find photos by years the instant your photos are imported into Lightroom. You don't have to do the work to put the photos into year folders or other year structures.
What I'm asking is: should the catalog AND the original files be on the same hard drive or doesn't it matter.
Doesn't matter. Catalog can be on any connected hard drive, photos can be on the same drive or different drives (plural), connected or disconnected.
Advice: don't organize via folders. I think this is a sub-optimal use of your time. Folders should be used as storage locations, and are not organizational tools any more (they were organizational tools before you had Lightroom). Set up your folders however your want to meet your storage needs (so if you really want all your photos on one drive — a good idea in many but not all cases — then do that to meet your storage needs) but don't use folders any more to achieve organization/searchability/"easy to find". Use keywords and metadata inside of Lightroom to achieve organization/searchability/"easy to find".

FCE Express is writing render files to startup disk not external hard drive

Similar Messages

Maybe you are looking for