FCE not exporting color corrections (help please)

I see there are some really experienced Final Cut folks here. Anyone care to help with this glitch?
I've imported AVCHD footage from a Canon Vixia in 1920x1080. I edit it in Final Cut Express. I add Color Correction and Brightness / Contrast Filters. Then I export it as regular Quicktime (no compression). For some reason the brightness changes get exported but the color correction changes do not. I have tried rendering the footage before export. No change. It only exports brightness edits.
How can I fix this?
thank you for your help!

Hi and welcome to the forum!
What are your sequence settings? Are you seeing the color changes in your canvas before export?

Similar Messages

  • PS Elements 11 -- Incorrect Colors, color painted not matching color selected -- Help please!

    Having a really odd issue with colors. The color that I have in my brush/paint bucket does not match the color that I picked up in my eye dropper/foreground color. Instead it paints out some diluted version of the color I'm using, and I have no idea why. I tried to look up a solution -- I reset the paint brush, all of the tools. And I have no layer styles set on said layers used.
    Any ideas how I could fix this? I need too desperately.. And as a side note, I am using RGB for color.

    Suggest that you reset the brush tool. On the tool's option bar, look for this:
    Click on it to reset the tools. If that does not fix it, go to Edit>Preferences>General and look for for this:
    Click on it, close PSE, then open the program.

  • Mail will not send messages. Help please: it receives OK but parks my outbound stuff in either Drafts or Outbox

    Mail will not send messages. Help please: it receives OK but parks my outbound stuff in either Drafts or Outbox

    Thanks for your answer. Apprciate it very much. Just prior to receiving your email, I got back online. However, as I had tried what you suggested (and a lot more as I am 'reasonably' competent), and had been so doing since yesterday afternoon, I do believe that what you suggested was correct - that it was my third rate ISP that was at fault.
    Nevertheless, many thanks once again.
    MJ

  • I just switched from Outlook to Mail and now the sent messages are not being displayed.  Help, please.

    I just switched from Outlook to Mail and now the sent messages are not being displayed.  Help, please.

    Back up all data. Rebuild the mailbox.

  • TS1702 Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.

    Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.

    Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.

  • My Apple desktop computer, 2.4 GHz Intel duo core, OS 10.6.8, stopped recognizing the WD My Book connected via firewire. It works fine with the USB port so it's not the drive. Help please.

    My Apple desktop computer, 2.4 GHz Intel duo core, OS 10.6.8, stopped recognizing the WD My Book connected via firewire. It works fine with the USB port so it's not the drive. Help please?

    It can be the bridge. It could need firmware update. or the FW ports may be an issue. LaCie seemed to invent the phrase/tip 'resetting firewire ports' due to the issues with their drive cases.
    You can try an SMC Reset.
    So far I have avoided name-brand and tend to see them mentioned. Often with a new OS (though you are on 10.6.8, but when 10.6 came out there was a common complaint and thread of users: FW or USB worked but not the other interface).

  • I reset the ipad. hoping it would help. but still it needs password for activation. the owner already forgot password for icloud as well as password of the email since it was not used since 2011. help please.

    I reset the ipad. hoping it would help. but still it needs password for activation. the owner already forgot password for icloud as well as password of the email since it was not used since 2011. help please.

    Your sister can go to https://iforgot.apple.com/ and see if she can recover her password.
    There is nothing anybody else can do.

  • Muse is not exporting the correct fonts.

    I was just about to update my website when I did a browser preview and noticed that two sections are not exporting the correct fonts. The font is not only wrong, but the size is dramatically increased - so much so that it is breaking the design (things that should be one line are now two) so much that I can not update the website until this issue is fixed. The one thing I know is related is that the error is only happening in three boxes that I recently worked with and did change the fonts (all of them typefi fonts) in design mode to look at the differences, but in the end I did not keep any of the changes. I checked and it's the same problem in both Firefox and Chrome. But, it is showing the correct fonts in Muse's preview window. Does anyone have an idea what's going on?

    You are not the only one having this problem i have a problem now with my system fonts only showing some of the families in that font
    atm i can't find my helvetica font in muse but i can see it fine in photoshop, indesign, and illustrator.
    its kinda pissing me off cause there is so many bugs atm with muse and fonts. and all we get each time is small ways to get it to work. then a new update comes up for muse and ruins it all again…
    they really need to fix this.

  • I cannot upload an exel file from lap top to numbers in iPad, message says file not supported.   Any help please?

    I cannot upload an exel file from lap top to numbers in iPad, message says file not supported.   Any help please?

    File Sharing lets you transfer files between iPad and your computer. You can share files created with a compatible app and saved in a supported format.
    Apps that support file sharing appear in the File Sharing Apps list in iTunes. For each app, the Files list shows the documents that are on iPad. See the app’s documentation for how it shares files; not all apps support this feature.
    Connect iPad to your computer.
    In iTunes, select iPad in the Devices list, then click Apps at the top of the screen.
    In the File Sharing section, select an app from the list on the left.
    On the right, select the file you want to transfer, then click “Save to” and choose a destination on your computer.
    Transfer a file from your computer to iPad:
    Connect iPad to your computer.
    In iTunes, select iPad in the Devices list, then click Apps at the top of the screen.
    In the File Sharing section, click Add.
    Select a file, then click Choose (Mac) or OK (PC).
    The file is transferred to your device and can be opened using an app that supports that file type. To transfer more than one file, select each additional file.
    Delete a file from iPad: Select the file in the Files list, then tap Delete.
    or use dropbox

  • Png files not exporting in correct color code

    Hey everyone I've had this continual problem in illustrator with png exports, for some reason my png's export with duller, less saturated colors than what I am seeing inside of illustrator. However, my jpegs export correctly. I've been able to figure out that my png's are not exporting with the correct color code (sRGB), even if this option is selected in "save for web" options. I have been having to open the png's in Mac's preview program or opening them into photoshop and exporting with sRGB profile embedded from there. I figure there must be some setting I don't have selected within illustrator. Document color mode is RGB, working space is sRGB, "Color Management Policy" is preserve embeded profile, and under the "Assign Profile" option it is set to working space RGB: sRGB. Any suggestions?

    I don't think there is anything wrong with the color management you are using.
    I suspect that you are using Illustrator CS6.
    Although you can specify that the image has to be converted to sRGB (and it probably does), the profile is not embedded in the file.
    The latest CC version does, although you cannot check a box: ICC Profile like you can when saving JPEG.
    I think the reasoning behind this could have been: "PNG is a web file format. and Browsers cannot be trusted with colormanagement, most of them think that all files are sRGB, so why embed the profile..."
    So you did the right thing by assigning the profile in Photoshop.
    Ton

  • Safari is not loading pages correctly or even not at all. Help please!

    So my Safari is not loading pages correctly, making some have just plain text with no images, and others partially loaded with no images or no video.
    Some pages, after trying to refresh, completely refuse to load and say that Safari can't find the server. These pages work on firefox, which is also on the same computer and what I am having to use to type this currently.
    I have already reset Safari, as well as disabled extensions (which I didn't have any) and neither has fixed the issue.
    Any help would be appreciated, thanks!

    Hello ddc92,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
    http://support.apple.com/kb/ts3230
    Have a nice day,
    Mario

  • SB X-fi Xtreme Audio PCI-E Not working correctly help please

    Hi i have a SB X-fi Xtreme Audio PCI-E card on my pc , i have currently installed windows 7 and for months now i am trying to make the card work .. I have a poor sound especially when there is bass, the card is not detected by windows 7, its detected as a high definition audio device , when i plug my mic is not found..and i cant use the creative applications because is says its not supported or i have no creative poroducts on my pc ... I have tried all the latest drivers and stil have the same problem.. HELP PLEASE !!

    First, uninstall all creative drivers, console, from add/remove. Restart computer install: . X-Fi Xtreme Audio Series Driver .04.0000 from creative website. 2.X-Fi Xtreme Audio Pack .03.0002 from creative website. 3. install Creative Console from here: http://forums.creative.com/t5/Sound-Blaster/PAX-Console-Launcher-V-0/td-p/549970 * PAX Console, Modded Original Console, but newer then Creative) or this creative console: CSL_PCAPP_LB_2_6_09.exe ( it creative original console) With this console you will have bass, treble, etc, BUT you need to open ConsoLCu.exe from Program Files/Creative/Console Launcher. ConsoLCu.exe have all the options you need. Creative forget about thier sound board, thier drivers, bass, treble, etc, about customers. If you install thier drivers from their website you will not have BASS, and also an crappy sound. You need to install Creative Console from google, or from http://forums.creative.com/t5/Sound-Blaster/PAX-Console-Launcher-V-0/td-p/549970 to have bass, crystalizer, etc. I also have Creative Audio PCI-e board..... crappy chipset, just like Sb Li've 24 biti PCI.

  • Batch Exporting  Color Corrected Clips, QT issues

    Hello,
    I work for a small ad company with a couple guys on the road shooting video, a video editor(me) and a few graphic designers. For company workflow reasons I take video footage from guys on the road and export to Quicktime movies(5-50 per client, 5-10 sec. apiece) and give to graphic designers, they then use After Effects and Motion to lay graphics on and lay out vid for ad.
    1. I generally capture the whole tape.
    2. I select Ins/Outs from that tape and make (lets say) 50 clips in timeline.
    3. I make all clips independant and rename in order 1-50
    4. (THIS IS WHERE PROBLEM STEMS) I color correct all clips using 3 wheel color corrector
    5. I pull all 50 clips (numbered, color corrected) into a client bin
    6. Right Clip bin, Batch export.
    7. Check Use In/ Out , Make Self Contained, Prefix .Mov, Quicktime movie using MPEG 4compressor, best quality, and set destination.
    8. Hit Export
    The result is a Quicktime Movie that has sound but is frozen on first frame of video.
    Normally this process works perfect and I have no issues with QT. Step 4 is something that I would like to incorporate but everytime I try I get the issues with Quicktime.
    Thanks ahead of time for help, hope I gave someone enough to go off of.
    I.V.

    If you drag the clips from the timeline to a bin and select them all and choose batch export and set the option to export in to out, it should work.  Not sure about the naming option, but I suspect it'll work.  Do a test first. 

  • LR4 no exported video change-help please

    Exporting from LR4 video there is no change to adjusted clip. I went through the clips from the the 5D mark II before I had LR4 in Quicktime and trimed and saved them. Made adjustments to the jpeg still. and synced the jpeg  preset and exported. Video exported with no change. Using 2.7 GHz Intel Corei5 10.6.8 12 GB of ram. Please help or guide me to a disscussion that I haven't been able to find among the many.

    http://help.adobe.com/en_US/lightroom/using/WS75C39DDC-B701-4840-A703-0755A5C04878.html#WS 2bacbdf8d487e582-424a4e56134157e47bf-8000
    Original :Exports the video in the same format, and at the same speed, as the original clip.
    under this Adobe help link exporting video - it doesn't say anything about not exporting the file without changes. Why would I want to export a copy of the video without changes made in LR?
    When exporting  as H264 I see a change. S0 "Original" means just what it says" and "Of course - same as re-saving a JPEG" isn't answering the question of exporting the video as original not exporting with lightroom changes. 
    Is the DPX format lossless to the "original" or is the export choice of save as Original not  functioning correctly, saving the files with the same format, and same speed as the original with LR adjustment?
    It looks like the DPX format is according to this link
    http://www.digitalpreservation.gov/formats/fdd/fdd000178.shtml
    under the Quality and Functionality Factors subsection isn' t for use in desktop PC applications. It seems that DPX is for archieveing much like the DNG or so it would seem in what I have found so far.
    All in all is the DPX format what should be used for lossless work flow or is the save as Original  not functioning the way that it should?

  • XML not pulling color correction or Motion Generator data?

    Does FCPX 10.0.8 support exporting XML data related to color correction or motion Generator templates?
    If I export a project to XML and reimport the same XML film into FCPX all resources are recognized and appear in the correct place/lane. My custom motion title themes come through, but the "Whites" generator in the project reverts its settings to default (i.e., in the Generator tab of the inspector the pop up is set to Smokey (defualt) instead of "Bright White" (selected in my original project). I also loose any color work I did on any of my clips.
    Anyone have a similar problem? Workaround?

    Hello veritasmediapro,
    I was wondering if you discovered a solution for the above. I am experiencing the same as what you describe. I was hoping I could use the fcpxml format to have a 3rd party tool generate a file that changes motion generator parameter values. My plan was to use key frames. As far as my experiments tell generator parameters as well as key frames on generator parameters are not supported :-(

Maybe you are looking for