FCE not recongnizing DV camera

My computer sees my Canon DV camera via firewire but when I try to capture through FCE, it does not see it. When I try to select my settings in easy setup FCE crashes on me. Any help would be much appreciated!
-Liz

Canon cameras are finicky in their implementation of firewire. Make sure your Easy Setup is DV-NTSC Firewire Basic. You might also need to trash your FCE preferences. See this link from Tom Wolsky, legendary contributor to this forum:
http://fcpbook.com/misc1.html

Similar Messages

  • FCE not recognizing camera

    I have a Sony HDR-HC1. FCE HD will recognize the camera when in down-convert mode but not when in HD mode.
    Any suggestions?

    Not quite sure what you're asking. Do you mean the HD resolution on the camera? It shoots in 1080i. There are two settings for vcr mode. One is HD and the other is HD-DV mode in which it automatically down-converts the HD to SDV. FCE has no problem seeing and digitizing the video in that mode. But it will not see the camera when in HD mode.
    Is there a specific setting in FCE for it to recognize HD? I couldn't seem to find it anywhere.
    Thanks for your reply.

  • After I make a note in the notes icon that came with the ipad, it immediately is emailed to my email address and disappears from notes. How can I make it stay on notes?

    After I write a note in the notes icon that came with the ipad, it immediately emails it to my email account and erases it from the note pad. How do I make it stay on the notepad? I don't particularly want it emailed to me.

    I have a test with some questions (multiple choice, FIB, matching, etc). I have just one button to submit all the answers, and after submiting the student can see his score and review the test to know where he failed. He can't answer again. However, he can change the answer multiple times before submiting.
    "if i turn on success/failure captions the student will see them while answering" - before submitting
    "if i turn them off he wont know what's the right answer" - after submitting
    My results page is the default. I didn't use any variable. When i go to the results page after reviewing the test all the entry boxes are "wrong".

  • Need to backup and remove photo library form my iphone.  This library was previously backup on a hard drive that crashed.  So these photos are only in the photo library and not in the camera roll.  If I do a full backup, it only takes the camera roll.

    Need to backup and remove photo library from my iphone.  This library was previously backup on a hard drive that crashed.  So these photos are only in the photo library and not in the camera roll.  If I do a full backup, it only takes the camera roll.
    So this is a 2 part question:
    1) how to I backup the Photo Library to my new hard drive (as the last one was unrecoverable but previously backed up)
    2) how do I remove the Photo Library form my phone (preferably after backup in item 1)
    Thanks, Janis

    Since it has always been very basic to backup your computer and all it's data, Apple provides no way for you to transfer music from your iPhone back to your computer.  As you know, you can re-download all iTunes purchases, but music that you ripped yourself you'll have to just re-rip again.
    You can try and find 3rd party applications that might help you.  I'm sure you'll pay, however.
    Let this be a very important lesson learned.
    Best.

  • Could not complete the camera raw command because of disk error

    Hi,
    First off, I am using a Mac (OS X ver. 10.9.2) and Adobe Creative Cloud Photoshop (2014). I just downloaded the preset pack off VSCO for Adobe Camera RAW and I am having trouble getting it to work.
    When I try to launch the "Camera Raw Filter", I get the message 'Could not complete the Camera Raw Filter command because of a disk error.' (this also happens sometimes when i try to import the RAW files into photoshop...I don't know if it's the way i'm importing them or what...?)
    I've tried uninstalling and re-installing photoshop cc several times and restarting my computer and have searched online but cannot find anything at all to help me (or i just don't understand, urgh).
    Please help!

    I'm getting same error and I think it's related to Adobe Camera Raw.  I see several manifestations of this problem:
    1) Open a RAW file (.NEF) directly using Photoshop CC 2014 - I get an error "Could not complete your request because of a disk error."
    2) In Photoshop CC 2014.  I go to Filter > Camera Raw Filter - I get an error "Could not complete the Camera Raw Filter command because of a disk error."
    I can do the following successfully:
    1) Open and edit a RAW file successfully in Lightroom 5.7
    2) Open a RAW file successfully in Photoshop from Lightroom 5.7 (when I do an "Edit in Photoshop CC 2014" from Lightroom 5.7)
    I was previously on LR3 and Photoshop CS5 on Mac OSX 10.6.8 (Snow Leopard) and bought an upgraded MacBook Pro last week.
    My upgraded system is now:
    Mac OSX 10.10.1 (Yosemite)
    Photoshop CC 2014
    Lightroom 5.7
    I've uninstalled / reinstalled Photoshop and Lightroom numerous times and the problem still occurs.
    Anyone else having the same problem?

  • Bridge does not show my Camera Raw Adjustments in previews or thumbnails.

    Bridge CS6 on my Mac is not showing my Camera Raw adjustments in a preview pane or thumbnail.
    Here's how it worked until recently:
    I open a .CR2
    I make some adjustments
    I click "Done"
    The thumbnail and the preview show the adjustments I made
    Now, it works like this:
    Open a .CR2
    Make adjustments
    Click "Done"
    The preview and thumbnail don't show all the adjustments. I can't see the results of noise removal, but I can see a drastic change in Exposure
    If I double-click the CR2 file, it opens in Camera Raw, and I see all my adjustments, including noise removal.
    Here's what I've tried, but saw  no difference (I restarted Bridge every time):
    Purge Cache
    Purge Cache for Selection
    Replaced Camera Raw plug-in as described here: Camera Raw 8.4 | No metadata or Camera Raw edit
         (Doing so made Camera Raw disappear in Bridge, so I restored the original file)
    Reset Preferences
    Reset Standard Workspaces
    All the above fixes were inspired by this thread: Re: Bridge CS6 not showing Camera Raw adjustments
    Why don't I see the noise removal effect in the previews? I am sure I saw it a few weeks ago. I rely on that, to help me sort and cull photos.
    I'm hoping there's a preference toggle that I accidentally changed. It's definitely a puzzle. (Version: Bridge CS6 5.0.1.21 5.0.2.4)
    Message was edited by: moonatwork after updating Bridge version. I tried all the above fixes again, after updating Bridge. It actually got worse. I tried replacing the Camera Raw plugin, which failed as before. I then restored the previous plugin, as before, but Bridge now fails to honor the preference, "Double-Click Edits Camera Raw Settings in Bridge" and instead always opens Photoshop.

    Thanks, Omke. I tried updating, then applying all the same fixes to the updated version. No change.
    I can attach a screenshot, but I must block out names and faces. All you'll see is my Bridge interface, not the faces in the portraits. Hope that helps.
    My specs:
    Bridge CS6 5.0.2.4
    Mac OS X 10.6.8
    16 GB RAM
    65 GB free disk space
    2 monitors, 2 graphics cards:
    ATI Radeon HD 4870
      Type:    GPU
      Bus:    PCIe
      Slot:    Slot-1
      PCIe Lane Width:    x16
      VRAM (Total):    512 MB
      Chipset Model:    NVIDIA GeForce GT 120
      Type:    GPU
      Bus:    PCIe
      Slot:    Slot-4
      PCIe Lane Width:    x4
      VRAM (Total):    512 MB

  • How do I transfer all photos and music from my old iphone 3gs to new iphone 4s? I have a new laptop because the old one broke and so do not have non camera roll photos or music stored anywhere apart from the iphone 3gs and cannot update io5 on the iphone

    How do I transfer all photos and music from my old iphone 3gs to new iphone 4s? I have a new laptop because the old one broke and so do not have non camera roll photos or music stored anywhere apart from the iphone 3gs and cannot update io5 on the iphone 3gs without erasibng everything. i need help!!!

    Syncing to a new iTunes library or computer will erase your phone. Only if you back up manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
    Do this:
    Disable autosync in iTunes, connect your phone to your new computer and right click on it in the device list and choose backup. iTunes will backup your device without syncing.
    Transfer your purchases the same way, choosing "transfer purchases" this time.
    When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
    Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the iPhone for the first time.
    Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
    There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
    About backups and what's saved:iTunes: About iOS backups
    How to back up and restore:http://support.apple.com/kb/HT1414
    How to download apps for free again:http://support.apple.com/kb/HT2519
    Saving other data is also described here. How to back up your data and set up as a new device

  • No luck importing from SonyHandycam DCR-DVD650?  I am using USB import to my MacBook that is running OSX 10.6.8. The MacBook is not recognizing the camera.  Any ideas what the issue could be?

    I am not having any success in importing my videos from Sony Handycam DCR-DVD 650 to my mac book.  I am using the USB connection.  The macbook is not recognizing the camera.  The macbook is running OSX 10.6.8.  Any ideas on what the problem could be?

    http://support.apple.com/kb/HT2361 There's a recommendation that when using this camera to record in the 'Standard' format instead of VR format. So if you know what the setting was you used to record the disk that's a starting point.
    According to this website the camera should be compatible with iMovie '11
    http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
    So here's some steps to take to get the Mac to recognize your camera.
    1. Try it more than a few times, sometimes it can take 2-4 attempts to get iMovie to recognize a camera for the first time.
    2. Always get the power adapter for your camera out of the bag. Hook it to the wall outlet, then plug your camera into that. Don't run it off the battery.
    3. With the camera plugged into the wall, in DV playback mode. Hit play and just let it play video out continuously, then reboot the Mac. As soon as you see the desktop, launch iMovie. Go to File Menu > Import from Camera and see if the Capture window opens with your video playing through.
    4. Make sure iPhoto doesn't try to launch itself automatically when it detects your camera has been connected to the Mac. Sometimes it tries to steal the videos off of a camera and 'blocks' iMovie from seeing the camera when it's attached. So make sure iPhoto hasn't interecepted your camera and is not running at all when you launch iMovie
    No guarantees, but some things to try

  • Bridge not finding my camera, have reset comp and still no luck.

    i'm on a macbook pro. operating on software 10.9.5 (not looking to update just yet) I normally connect my camera to my computer and upload my images through Bridge. for some reason today Bridge can't find my camera at all. i've already restarted the computer and re downloaded bridge. what do i do? i've never had this happen since having my new camera and comp and i'm ticked about it.

    Could be a faulty card, a faulty cable connecting the card reader to your computer…
    You are not connecting your camera  directly to your computer, are you?
    This excerpt is from a long-gone post by author Bruce Fraser:
    Bruce Fraser - 4:17pm Jun 14, 04 PST (#5 of 21) Opening files directly from the camera is a bad idea for a variety of reasons*, and it most certainly isn't faster than using a FireWire or USB2 card reader.         •
            • Drains the camera battery
            • Runs the risk of the software you're using to open the images writing to the card and destroying the format
            • Runs a small but significant risk of USB power frying the camera
            • Slowest method known to mankind of getting images off a CF or SD card

  • I could not open my camera raw files from canon mark iii with my photoshop CS5. Tried to update Camera raw 6.7 but failed to install. Message said 'There was an error downloading this update. Please quit and try again later'. How could I open Raw files ?

    I could not open my camera raw files from canon mark iii with my photoshop CS5. Tried to update Camera raw 6.7 but failed to install. Message said 'There was an error downloading this update. Please quit and try again later'. How could I open Raw files ?

    Try installing it manually from:
    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7.1 Update
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7.1 Update
    Regards,
    Ashutosh

  • I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is  2010and does not read my camera,  I went out and downloaded the new one and it does not link to adobe photoshop cs5

    I have moved my Photoshop CS5 to my traveling computer,a Surface Pro 3.  I have photoshop loaded but in trying to look at raw images it says my camera raw does not support the sony alpha 65 which is what I have.  I went out and tried to download the newest raw version and even went out and did a zipfile download and it will not update my current version.  What should I do

    I have 6.0.  Tried to download newest verion and it will not download.  Went out and then downloaded a zipfile and it still will not download, thus cannot look at my raw pictures.
    Thanks, John
    m: gener7 
    Sent: Thursday, December 11, 2014 6:01 PM
    To: JOHN STAHLY
    Subject:  I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is  2010and does not read my camera,  I went out and downloaded the new one and it does not link to adobe photoshop cs5
    I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is  2010and does not read my camera,  I went out and downloaded the new one and it does not link to adobe photoshop cs5
    created by gener7 <https://forums.adobe.com/people/gener7>  in Photoshop General Discussion - View the full discussion <https://forums.adobe.com/message/7007148#7007148>

  • HT4101 I am trying to connect my JVC Hard Disk Drive Camcorder to my IPAD 2 via the Apple camera kit. I am able to down photos, but video files not showing. Camera shows Mass Stoarge. How can I download videos please.

    I am trying to connect my JVC Hard Disk Drive Camcorder to my IPAD 2 via the Apple camera kit. I am able to download photos, but video files not showing. Camera shows Mass Stoarge. How can I download videos please?

    The file name only has 6 characters and I'm not sure what the .mod format is. So that's why they are not seen by the iPad.
    Another way to transfer. You can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
    Secrets of the iPad Camera Connection Kit
    http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
     Cheers, Tom
    Look at this link for convertion the .mod format.
    http://www.makeuseof.com/tag/convert-mod-camcorder-video-format-mpg-instantly/
    Message was edited by: Texas Mac Man

  • Iphone 5c does not work rear camera (screen is black) and a flash light since yesterday. Maybe someone knows what happened.

    Yesterday stopped working camera application turns on but the screen is black. It does not work too flashlight. It is gray in the control panel. Maybe somebody know what happened if I need to return my phone service warrants.

    Hello szpryczek,
    Thanks for using Apple Support Communities.
    To troubleshoot issues with your iPhone camera, please follow the steps below.
    Camera
    Camera isn't functioning or has undesired image quality
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
    Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
    Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    If the issue persists after the previous steps, please click the link below to contact Apple Support.
    Issue not resolved
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Take care,
    Alex H.

  • HT4623 After i updated my iPhone i realized i do not have my camera anymore how to get it back? I also using a new notebook so I do not have a back up to transfer it from.  Please help

    After i updated my iPhone i realized i do not have my camera anymore how to get it back? I also using a new notebook so I do not have a back up to transfer it from.  Please help

    I'm assuming you mean you don't have your camera application (which is not saved on any backup anyway).
    One way to find it is to get to your home screen, swipe the screen from right to left, and type "Camera" in the search field.  Camera is a core Apple app and cannot be deleted, so it must be there somewhere.
    An alternate approach is to do Settings > General > Reset > Reset Home Screen Layout

  • PSE 9 does not come with Camera Raw 6.2?

    Photosho Elements 9 does not come with camera raw 6.2
    , I downloaded the trial version which came with an outdated 6.1... the only version of 6.2 is for PSE8 and does not work with PSE9 how is this possible? How can they release a product with an outdated ACR????Now we have to wait for an update to a new product???Come on people!!!

    Cheap shot, Phil. Up to now, Mac users got no Organizer but a special bonus: full Bridge, full access to full featured ACR. With this version, both platforms get the same stuff -- it's less than full Photoshop/Bridge CS5, at a small fraction of the price.
    I admit, as a Mac user who shoots RAW, I liked the old trade-off...but I can understand the desire to make the two products consistent. If that makes PSE "inferior" for you than you should stick with Bridge CS4/Raw 5.7, or move up to the full-featured siblings, or switch to Lightroom.

Maybe you are looking for