FCE time off 1 frame?

In the viewer of FCE, if the time of a clip is say, 18 seconds 15 frames and you mark an in point there, then type +204 (to go forward EXACTLY 2 seconds & 4 frames) it should say 19:19 right--but it says 19:20, it adds one frame every time. I've not noticed this problem in the Pro version and it should have nothing to do with drop frame as it's under a minute. Any thoughts? Thanks.
It's FCE 3.5

Strange... in my viewer it goes to 20:19, not 20:20. I guess this implies something with your FCE has gone awry. Try trashing preferences and see if it makes any difference: http://fcpbook.com/Misc1.html

Similar Messages

  • Turning off frame blending in Adobe Media Encoder

    Is there a way to turn off frame blending in Adobe Media Encoder?  I have a bunch of
    Flip Mino HD footage (1280x720p) which I wish to convert to P2 720p format so that
    I can more easily mix and match it in the Premiere timeline with actual P2 footage
    shot on an HVX200.
    I successfully used Media Encoder to perform this task but there is one problem.  The
    Flip footage is 30fps and P2 720p is 29.97fps.  So Media Encoder uses frame blending.
    The frame blending sometimes creates obnoxious artifacts so I would like to turn it
    off but there seems to be no way to do this (or alternatively "conform" the 30fps input
    to 29.97fps so that no blending is nescessary).
    After Effects CS4 would seem like an alternative since it has nice batch composition
    creation and rendering features but it cannot render to the P2 format - it appears to
    have a older version of Media Encoder embedded within it - predating P2 support.
    I would like a solution that is easily "batchable" as I have several hunderd Flip Mino HD
    clips that need to be processed.
    You might also ask, why not just import the Flip clips unchanged into Premiere CS4
    and mix them with the P2 clips?....I have tried this and it seems to drive Premiere crazy
    introducing various crashes and other strange behaviors.  The pre conversion to P2
    route seems to work fine.  I just want to get rid of the frame blending.

    I happened upon this video just before I made my posting and it doesn't help with the
    crashes/hangs.  When I import more than about 20 Flip Mino HD clips it seems to trigger
    some sort of memory corruption bug in Premiere.  Some of the clips start to just
    show as solid green in their thumbnail views in the timeline and scrubbing the timeline
    eventually hangs Premiere altogether.  This is reproducible on two different computers
    although the exact symptoms change slightly each time it is tried.  Importing only 3 or 4
    clips actually seems to work, at least for a short while.
    The problems happen even if the only thing imported into the project are Mino footage and
    the Sequence is set to Desktop or XDCAM mode.  So the crashes have nothing to do
    with P2 editing mode.
    The same installation of Premiere CS4 on one of these computers has been just used to
    successfully edit and render out a P2 project with hundreds of clips, stills and titles so the
    basic CS4 installation seems to be solid.
    I'll eventually file a bug report but for now I'm more interested in getting the job done.

  • Issue with PTO (Paid Time Off) quota generation

    Hi All,
    We have an issue with quota generation of PTO for our employees.
    The issue goes like this:
    We have a Paid time off for employees 5weeks( 200 hrs) for employees who have worked less than 5 years.
    we have  paid time off for employees 6 weeks ( 240 hrs) for employees who have worked more than 5 years.
    we have the following logic that has to go in this config:
    -- Our fiscal year starts on Feb 1st and ends on Jan end or Feb starts which has a full week of working days. ( ex: if 01/31/2012 falls on a Thursday the following Monday which has full 5 day working week would be the end of the fiscal year).
    -- Depending on the working hours of  the employees and the date of joining for the first year ( for new hires)0041 info type the eligibility gets varied and reduced. Ex( employees who joins on start of fiscal year and works 40hrs per week schedules is eligible for 200hrs of PTO. Employees who join in the month of august and works for 35 hrs per week ( i.e mid of fiscal year) would get 91 hrs of PTO.
    I need to put this in the system. I am thinking this could be done with out tweaking PCR.I need help in configuring this in Absence quotas as to what are the things i need change in system config and how do i do it. Please help with some screen shots if possible.  I really need this to get it done ASAP. Looking forward for help.
    Thanks,
    Chowdary.

    We use TM00 schema. Can i call TS15 and TS 12  rules into TM00 acheieve my issue of quota entilements?
    Iam doing this because my businees needs to see if an employee chages his work schedule from 40 to 30 or 20 etc.. the PTO has to vary accordingly.
    As the minimum eligibility is to work for 20 hrs to avail the PTO days. If at any point the employee drops it under 20 he will not be eligible till he work any this >= 20hrs per month so the evaluation has to check periodically to update the quota availability.... I need help plz suggest ...

  • Query-Paid Time Off (PTO)

    Hi,
    I am working on Time Management. I have a query. I need to set the PTO (Paid Time Off) right wherein the Details given as under:-
    Scenario:-
    1) Length of Service=0-0.99
    Accrual hours per pay period=4.01
    Yearly Equivalent= 96 Hours
    Maximum Hours of Accrual=96
    2) Length of Service=1-1.99
    Accrual hours per pay period=4.01
    Yearly Equivalent= 96 Hours
    Maximum Hours of Accrual=144
    Here the query is that the Maximum number of Hours to be accrued should be 96+96=192 but the client wants it to be 144 and not 192 but clients wants to add the Scenario 1 and 2 for maximum number of hours but the total should not exceed 144. Same is the case with other scenario’s given wherein I need to add maximum number of hours but there is limit set  for total.
    I went to T559L but unable to understand how to incorporate the above stated.
    Kindly help.
    Regards,
    Garima

    Hi,
    Kindly go give a reply.
    I need to solve the query.
    It will be suitably rewarded.
    Regards,
    Garima

  • Overtime compensation by time off.

    Dear Experts,
    I am using TM00 for time evaluation, I want to compensate the overtime perfomed by employee by time off only (no payment for overtime), I am using PCR YO16 for determining overtime (Copy of TO16 Determine overtime without approval), I have set the compensation type 3 (Compensation time off) using PCR YO16, I have created one absence quotya type 02 called as "comp off" with "INCREASE" mode in customizing, I have kept base entitlement for this quota type as Day Balance 0410 (Time off from overtime), the issue is that the quota type 02 is geting accrued twice if employee works overtime this is because PCR for compensation of Overtime TC10 updates the quota 02 by UPDTQA by overtime hours and QOUTA function also increases the quota type 02 by overtime hours,.
    Since my quota type 02 should only get generated if any employee works overtime I dont want it to get processed by QUOTA function so could you please let me know how to achieve it.
    If there is any other solution for my requirement then also please let me know.
    Thanks,
    Javed

    Hi Okan,
    For accessing the quota in time evaluation should be in increase mode.
    Still I tries as you said be it is also preventing it from getting updated by UPDTQA.
    I am having one workaround...if I remove the UPDTQA statement from TC12 I am getting correct results since the quota is getting updated by QUOTA function only...but I think this would not be the correct way to get the solution since SAP has provided the UPDTQA statement in TC12 means there should be some purpose behind it...right...the correct way would be to avoid the quota getting updated by QUOTA function...I think we are missing something...bevause of which we are not able prevent QUOTA function from updating our quota..please suggest...
    Thanks,
    Javed

  • Trying to use labview to analyse analog data from a jump on a force plate and measure peak force (at two points, initial land and 2nd land from jump). Also need to mark the time of flight (time off plate).

    Attached is a file of 3 trials of a drop vertical jump activity onto a force plate.  the subject stands on a platform off the force plate, jumps onto the force place and immediately jumps up as if going for a rebound.  I am able to run this data and obtain a waveform graph with no problems.  however, I need to be able to find the initial contact with the force palte, the peak of the drop, the intial time off the force plate (prior to the jump), the return from the jump and finally the second peak (landing from the jump). 
    I want to calculate the time of flight ( time off the plate and in the air after the intial drop) to calculate juimp height.
    I had someone write me a mathscript for it and it works well, however, I need to do it without mathscript as I do not understand mathscript (nor Labview!!).
    Please help
    Attachments:
    Jose_Index and shift register6.vi ‏130 KB
    NI post.docx ‏365 KB

    OK, but I'm not understanding what you're asking us to do... Are you asking us to explain what the MathScript code is doing? (It's searching the array for the elements when the values are above or below a threshold.) Are you asking someone to convert the whole MathScript code to LabVIEW (we are not a code-writing service), or you just want to be able to calculate the new stuff you want with LabVIEW?
    In the future, please do not post proprietary file formats. Most people do not have Word, or Word 2007 for that matter. Please post text files or PDFs. Thanks.

  • Unable to find consolidate field in Time off Process application

    Hi All,
    I create an aplllication for Time off process and unable to find "consolidate" field when selecting set up block parameters .I am using portals EP 7.0 Version
    Could you please help me in getting this ...
    Thanks ,
    Nararaju.

    Hi,
       we group parameters so that the output of process actions is automatically entered as input .We can consolidate parameter at Action,block adn process levels
    follow the below steps
    1. Select your Seq Block and click on the tab "Parameters" at the bottom pane
    2. Mark all the parameter (press ctrl for multiple ) and Click on Map
    3. Supply the Name and say create
    at last do a SavaAll
    hope this will solve ur problem
    cheers
    souza

  • Turning on the backlight with backlight timer off

    With the backlight timer set on off, there is a feature to turn on the backlight by holding the menu button. I remember doing that a while ago, but my ipod no longer does that anymore. Now with the backlight timer off, and i hold the menu button it no longer does that (it just goes to the main screen). I've tried reseting the ipod, but the feature does not come back.

    The only way I can think of to get the feature back is to "update" using an older updater, such as the one that came with your CD.
    Reinstall the updater from the CD that came with your iPod would give you an older update that would contain the feature your looking for. Also using the "previous updaters" feature in the iPod folder on your computer would have the same effect. Update the iPod with one of these. However, bear in mind that newer features such as the volume limiter that are on the new 1.1.1 update would not be available.

  • My facetime starts connecting then fails to make the call ? ive tried the swtiching face time off switching macbook off then switching it back on the logging back in to facetime but still no joys. any help ?

    my facetime starts connecting then fails to make the call ? ive tried the swtiching face time off switching macbook off then switching it back on the logging back in to facetime but still no joys. any help ?

    my facetime starts connecting then fails to make the call ? ive tried the swtiching face time off switching macbook off then switching it back on the logging back in to facetime but still no joys. any help ?

  • FCP turns off when I turn off frame blending

    Hi, I really hope that someone can help with this. I'm running FCP 5.1, 8 GB, 2.66 Ghz. Just starting yesterday, everytime I keyframe a move in the motion tab, as I click to turn off frame blending, FCP quits. No "app unexpectedly quit" warning or anything. Just shuts down. It's pretty annoying when you're on a deadline.
    Anybody have any ideas? Please feel free to step up to the plate. Thanks!
    mac pro G5   Mac OS X (10.4.8)   Big Huevos

    Did you do any software updates recently? You should always clone your startup drive when you have a stable OS/Application combo. This way you can restore your system to it's previous state quickly.
    Have you repaired permissions?

  • Shouldn't variables reset each time the frame plays?

    In my flash program I have everything on one frame. In the actionscript on that frame, I made a variable called currentButton and set it to the first button, to keep track of which button is currently pressed. In the click function this variable is changed to whatever button was clicked.
    Now, I didn't think this would work, because seeing that the one frame is being played over and over, (there's no stop() command in there) I thought currentButton would keep being reset every frame. To my surprise, it worked just fine. Not that I'm complaining, but I'd like to know why it's doing that. Shouldn't all the code on the frame be done every time the frame is played, including the part that sets currentButton to button1?

    The frame is not played over and over... you can easily test by just putting trace("hello"); in frame 1 and testing. You'll see hello only one time. Unless you have more than one frame, the stop is automatic.

  • Sysdate truncating time off

    Hi,
    I am having issues with a date field that I have on a form.
    The field is hidden and has a default set as sysdate. This gets the date OK but it is truncating the time off.
    I have tried using a date picker (DD-MON-RR HH24:MI) , but when I have sysdate set as the default, the time is set to 00:00. If I take the default off, the time is returned OK. The formatting masks are also no use when I have set the default as sysdate.
    As it is a hidden field, using a date picker is not very useful anyway.
    I have also tried using a text item and setting the default as to_char(sysdate, 'DD-Mon-RR HH24:MI:SS') but as the database column that is being inserted into is of type DATE, that is no use either and to_date(sysdate, 'DD-Mon-RR HH24:MI:SS') still trunactaes the time.
    I dont really want to have to start using background triggers to set the time, or use custom functions as this could be problematic in the future to maintain.
    I am currently using Apex v2 although we are looking to upgrade to v4 very soon.
    Any help would be great,
    Thanks

    Hi Jeff,
    I have tried that but I am getting the
    "ORA-01830: date format picture ends before converting entire input string
    01830. 00000 - "date format picture ends before converting entire input string"error.
    I have tried everything I can think of.
    Even if I run it as an SQL with something like
    UPDATE xxmel_apex_at_transactions trn
    SET trn.creation_date = to_char(sysdate,'DD-Mon-RRRR HH24:MI:SS')
    WHERE trn.transaction_id = 412;
    I still get the above error. :-(
    Chris

  • Source of Time-off Request Project

    Hi,
    I am new to CAF guided procedures, I am trying to implement the Callableobject in webdynpro(java) same as time-off request. in gallery>examples>Time-offrequset, will clear my doubts. so how can i get the DCs
                 com.sap.caf.eu.gp.example.timeoff.wd.create.CCreate
                 com.sap.caf.eu.gp.example.timeoff.wd.approve.CApprove
                  com.sap.caf.eu.gp.example.timeoff.wd.complete.CComplete
                  com.sap.caf.eu.gp.example.timeoff.wd.display.CDisplay
    Regards,
    Naga

    Hi Chandan,
    Thanks For your reply.
    todo These  things, i needed from the source.
    1. When we open the time-off process , its opening webdynpro view directly, without clicking execute button. how can we achive it?, i tried the example "Designing a process from the scratch" , but didnt get it.(its directly opening webdynpro screen when i click the initiate the process, how can i acieve this?)
    2.How can we allocate the action to processors in run time?
    3.when we initiating a process its not not asking the stepsfill input, edit roles ? how can we achive this?
    Regards,
    Naga

  • Time off in print preview doesn't show

    Hi, 
    I'm working in Project 2010 on a Windows 7 machine.
    In the Gantt-diagram the time off (saterday and sunday) is shown.
    However, it doesn't in the print preview neather on the print itself. Te free time is just as blank as the rest of the week.
    I use project a lot but never had this problem.
    Even when I copiet the rows to another project where I didn't have the problem, the problem also moved to that project..
    Hope anybody can help me with this problem.

    Have you compressed the print so you are not showing every day?  Check File > Print and click the Page setup hyperlink.  On the Page tab does it show 100% ?

  • Error in generate the time off from overtime

    Dear all,
         I try to config absence quota of  the overtime compensation(time off) in the system, and without clock time.one hour overtime for one hour time off.And I put the time evaluation into payroll calculation,this means we don't have the time evaluation.
         Now I have a problem that when I run the payroll calculation, the quota hasn't generated in the end. I find that in the process in payroll, the quota of time off have generated but hasn't transfered. The table qttrans is nothing and others table have the data.
        So , can you tell me where I have made a mistakes.
        Thanks.

    Simon
    if you are not haveing RPTIME00 (TE)  the quotas are generated throough Programme  RPTQTA00 Tcode PT_QTA00
    if u want to generate the Compoff for Quotas  Just check the Use of the Option IT0416  and XT00 Sub schema which you have use to insert the PCR
    and if u want to Generate the OT  you can generate it through  IT2010 , IT0015
    and also check the Time status in Infotype 0007  Which you have being maintained
    Edited by: Sikindar on Oct 11, 2009 11:56 AM

Maybe you are looking for