FCE upgrade from version 2 to 3.5

I have the original FCE 1 disk and FCE 2 upgrade disk. But I never bought FCE HD, so I don't have versio 3 (=HD).
Does the 99$ upgrade version (FCE 3.5) also work when upgrading from FCE 2.03?
G5 dp2.5/2.5GB Mac OS X (10.4.6)

Yes - it will upgrade from versions 1, 2 or 3.
You will find the confirmation half way down this page in the right hand column:-
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa?productLearnMore =MA264Z/A
You may not even need the old FCE to be installed as I have been told that all you need is its serial number.
Ian.

Similar Messages

How do you fix 'unable to upgrade from version 0'?

I have been working on 6 ibooks over the past year, documenting a lot of stuff for user manuals for our school. The ibooks were all created in iBA version 1.0, but are not published - we only use them internally so we just use the previews.
I gave up trying to upgrade my 1.0 iBooks, it takes too long to 'optimize' the files when I try to open them in 2.0. I have read all the issues with iBA 2.0, but decided to download 2.0 on another computer and wabt to try to re-write all my old 1.0 manuals (I have all the files that went into them).
However, when I double-click to open the 2.0, nothing happens. So I go to 'File' and select 'New from Template Chooser'. I then get the window with all the new templates, including the portrait ones. When I select any template, say the 5th one for example, I get the prompt "The document 'Textbook 05.ibatemplate' could not be upgraded. Unable to upgrade from version 0". This happens for every template. I don't understand. I downloaded the 2.0 from the app store onto a 'clean' computer. Yes, it has Lion on it and all the spec requirements to run iBA. Can anyone help me with what to do next?

Did you ask Apple for help yet?
[email protected]
…support phone number call +1 (877) 206-2092.
Global Phone Support
We have expanded English-language publisher phone support. To make contacting the iBookstore support even easier, new local phone numbers are now available for Australia, France, Germany, Italy, Netherlands, Spain, and the U.K. Support is available Monday to Friday, from 7 a.m. to 5 p.m. (PT).
Country
Phone Number
Australia
1300 307 504
Note that this is a low tariff number.
France
0805 540 117
Germany
0800 664 5307
Italy
800 915 902
Netherlands
0800 0201 578
Spain
900 812 687
U.K.
0800 975 0615
U.S.
+1 (877) 206-2092
Toll-free from U.S. and Canada.

I can not upgrade from version 9.1.5 to 9.2.3 on my IMAC free?? I have to pay for this upgrade?

I can not upgrade from version 9.1.5 to 9.2.3 on my IMAC free?? I have to pay for this upgrade?

That is a free update (not an upgrade) what happens when you try? How are you trying to update? did your Mac come with restore disks or did you download software form teh App Store? Have you logged onto the App store and checked purchased software for updates?
LN

Issues during technical upgrade from version 4.6C to ECC 6.0

Dear All,
We have done a technical upgrade from version 4.6C to ECC 6.0 and encountered following issues -
In the t-code ABZE (acquisition with in house production) there is a check-box for reversal posting on screen with version 4.6C. However, this field is missing in ECC 6.0. Why so?
In the report s_alr_87012327, there is a field "only with creation block" in version 4.6C. However, this field is missing in ECC 6.0. Why so?
Request to kindly suggest the alternative to carry out the same in ECC 6.0.
Thanks in advance.
Regards,
Dhawal

Hi Akshya,
Please find answers below.
1) 4.6c is NON-UNICODE system, Can I upgrade it into ECC 6.0 UNICODE system?
Yes you can.
If you are on a single code page system then you can give a gap between your uprade and unicode conversion. There is no problem with the singlecode upgrade and conversion.
But if your system is MDMP then you will have to do the CUUC method that is both upgrade and unicode conversion together. Though you can give a gap and sign an disclaimer with SAP it is still not recomended way.
2) 4.6c does not have any ITS system installed. If we upgrade it to ECC6.0 ABAP only, then Can I activate WAS internal ITS?
Yes you can activate it.
3) 4.6c does not have any JAVA stack. When I upgrade it to ECC 6.0, can I upgrade it to dual stack (ABAP+JAVA)? If yes, then how?
After the upgrade and unicode conversion you can install the java stack.
Regards,
Ravi.

Is there a version of Acrobat XI Pro called 11.0.2? I am trying to submit a grant on grants.gov, and it is telling me that I need to upgrade from version 11.0.08 to 11.0.02.

Is there a version of Acrobat XI Pro called 11.0.2? I am trying to submit a grant on grants.gov, and it is telling me that I need to upgrade from version 11.0.08 to 11.0.02.

Here is the message that appears: It's not a screen shot, but this is the entire page as it comes up:
To view the full contents of this document, you need a later version of the PDF viewer. You can upgrade
to the latest version of Adobe Reader from www.adobe.com/products/acrobat/readstep2.html
For further support, go to www.adobe.com/support/products/acrreader.html
In spite of what the message says, I am using Adobe Acrobat XI Pro, not Reader.

Does the Technical Communication Suite have an installation application similar to the Creative Cloud Suite? If so, how do I get it? If not, how do I upgrade from version 4? Thank you

Does the Technical Communication Suite have an installation application similar to the Creative Cloud Suite? If so, how do I get it? If not, how do I upgrade from version 4?
Thank you.

Not sure what CCS has that you’re referring to, but TCS5 is out and can be installed via subscription or downloaded installer.

How to upgrade from version 3.2 to version 4

Current using SQL Developer version 3.2.09.
OS: SUSE Linux 11
How to upgrade from version 3.2 to version 4?
Thanks
Scott

Current using SQL Developer version 3.2.09.
OS: SUSE Linux 11
How to upgrade from version 3.2 to version 4?
The documentation is your friend.
All of that is explained fully in the Oracle documentation.
Oracle makes their documentation available for FREE download. The Sql Developer Installation Guide covers nothing BUT how to install and upgrade the product.
https://docs.oracle.com/cd/E39885_01/doc.40/e38928.pdf
The user guide is also available
https://docs.oracle.com/cd/E39885_01/appdev.40/e38414.pdf

My ipad will not stay activated after upgrading from version 7 to version 8.

After upgrading from version 7 to version8 I cannot keep my ipad activated. I have tried online tech support and visited an Apple store with no one able to tell me what is happening. Some said it might be had ware problems. Other say it might be software problems. With vs 7 I never had the problem.. I have anolder ipad with vs 5 and do not have the problems. any feed back from anyone.

'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

Can I upgrade from version 10.4.11 to 10.5.8 in order to access mobileme?

Can I upgrade from version Tiger 10.4.11 to Leopard 10.5.8 in order to access mobileme?, If so, how would I accomplish this action? I have already created a web site using iweb which came with my I-Mac (3 or 4 years old), and noe need to publish it on mobileme.

If you machine meets the minimum for Snow Leopard (10.6.x) then it would be easier to buy that. If the machine is capable I'd recommend upgrading to Snow Leopard. It's going to be difficult and more expensive to get Leopard. Here are the minimum spec's for Snow Leopard:
General requirements
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible Internet service provider; fees may apply.
Some features require Apple’s MobileMeservice; fees and terms apply.
Roger

HT201413 upgrading from version 10- now i cannot use iTunes at all!

I downloaded the most recent iTunes software (upgrading from version 10) and now I cannot use iTunes at all! Upon opening iTunes, it says that "an unknown error occurred (-45054)". If i click "ok" itunes immediately closes itself...what do I do??

Hello KarmaThaPilot,
I located an article that may help you with the issue you're experiencing. Take a look under that heading titled "Using the Repair Privileges Utility."
Troubleshooting permissions issues in Mac OS X
http://support.apple.com/kb/ht2963
For Mac OS X 10.2 or later, open Disk Utility (/Applications/Utilities/). Select your Mac OS X startup volume in the column on the left of the Disk Utility window, then click the First Aid tab. Click the Repair Disk Permissions button.
Before performing maintenance such as repairing disk permissions, it's always best to perform a backup of critical files.
Mac OS X v10.5, v10.6: How to back up and restore your files
http://support.apple.com/kb/ht1553
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Just upgraded from version 3 to version 5 but cant open do i need to uninstall 3 first

just upgraded from version 3 to version 5 but cant open do i need to uninstall version 3 before i can open ?

You need at least OSX 10.7.0 64bit.
Macintosh
 Processor: Multicore Intel® processor with 64-bit support
 OS: MAC OS X 10.7 (Lion) or later
 RAM: 2 GB (4 GB Recommended)
 Hard Disk: 2 GB of available hard-disk space
 Display: 1024 x 768 Monitor Resolution
 Internet connection required for Internet-based services

Can I Upgrade from version 5 to the latest?

Can I upgrade from version 5 ..... want to install on new 64bit machine but have lost CD ..... what are the options.
Message title was edited by: Brett N

There is never an upgrade "patch" to change an old version to a new version. Each version of PSE is an independent, full program installation.
Your options are:
Find the best price you can for a "full" version of PSE10 and purchase and install that.
Wait a while until the new PSE11 is released and purchase and install that.
Ken

Do i have to upgrade from version 10.6.8 to use icloud on my mac book air?

do i have to upgrade from version 10.6.8 to use icloud on my mac book air?

I'm afraid so. The minimum requirement for iCloud is Lion 10.7.5 (Mountain Lion preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is non non-functional - you cannot now open or access a MobileMe account.
To make use of iCloud you will have to upgrade your Mac to Lion or Mavericks, provided it meets the requirements.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Lion is available in the Online Apple Store ($19.99). Mountain Lion (10.8.x) is also available there at the same price but there seems little point as the system requirements are the same for Mavericks (10.9.x) - which is free - unless you need to run specific software which will run on Mountain Lion only.
The requirements for Mountain Lion and Mavericks are:
OS X v10.6.8 or later
2GB of memory
8GB of available space
and the supported models are:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
It is available from the Mac App Store (in Applications).
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table

What is the procedure of Call Manager upgrade from version CUCM 7.1 (MCS Server) to version CUCM 10.2 (on UCS server)

Hi
What is the procedure of Call Manager upgrade from version CUCM 7.1 (MCS Server) to version CUCM 10.2 (on UCS server) , please let me know the steps to what would be the backup procedures and upgrades.
Regards
Gaurav

I'd suggest reading this guide to make sure you have prepared your environment to support 10.x first. The link below also contains the upgrade path to 10.0(1).
One of the ways you can do this is:
1/ Apply refresh upgrade cop file on all servers in cluster.
2/ Upgrade the cluster to 8.6(2). Take a backup of the cluster.
3/ Build a cluster of 8.6(2) servers on VMs, and assign them the same hostnames and IP address as the hardware cluster. (You may need to keep these on a separate network until switching off the hardware machines)
4/ Restore the backup taken from the hardware cluster on to the VM cluster.
5/ Upgrade VM cluster to 10.0(1).
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/upgrade/10_0_1/CUCM_BK_U4214F9D_00_upgrade-guide-cucm-100/CUCM_BK_U4214F9D_00_upgrade-guide-cucm-100_chapter_010.html#CUCM_RF_UA60AFAB_00

How I can upgrade from Version 10.7.4 into the last version ?

How I can upgrade from Version 10.7.4 into the last version ?

If your computer meets the requirements then open App Store, sign in with your Apple ID. Locate Mountain Lion, purchase and download.
Apple - OS X Mountain Lion - Read the technical specifications.
Macs that can be upgraded to OS X Mountain Lion
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)

FCE upgrade from version 2 to 3.5

Similar Messages

Maybe you are looking for