FCE working with a Canon HV10 model

I cannot make FCE recognize my Canon HV. Yes I know its not on the list however, Mac knew I had this camera when they sold me the new Mac and FCE software. Is there anyone else out there that is using a Canon HV10 model. FYI imovie, works fine with it.
Mac Mac OS X (10.4.9)

Canon cameras usually require a Firewire Basic choice.
Search the forum for "Easy Setup" plenty of info here.
Here's one to start:
http://discussions.apple.com/click.jspa?searchID=-1&messageID=1257194
Al

Similar Messages

Will Elements 12 work with my Canon printer model pixma ix6520?

will Elements 12 work with my Canon printer model pixma ix6520?

You must install the TWAIN driver:
http://helpx.adobe.com/photoshop-elements/kb/twain-installed-photoshop-elements-11.html
However, it may still not work, since some scanners are not compatible with the 64-bit PSE 12. Epsons have the most problems, unfortunately.

Does the "Mini DisplayPort to VGA Adapter" work with all Samsung tv models?

Does the "Mini DisplayPort to VGA Adapter" work with all Samsung tv models?

It's a VGA adapter. Nothing special about that. If your Samsung monitor supports VGA then it will work.
But why not go completely digital and use a Mini DisplayPort to HDMI adapter to skip the analog conversion? It also supports passing audio over HDMI.
About Mini DisplayPort to HDMI adapters

StarTech Adapter not working with Dell Inspiron 15, model 3521

Side Note: I wrote a reply to a thread that was from 2013. I do apologize because the link was sent to me by my bf and I did not realize how old it was. Since my reply has to be approved I can't delete it.
Current Issue: StarTech Adapter not working with Dell Inspiron 15 model 3521
I bought my Dell laptop last year and at first I did not realize that it had only one audio jack (combo, as the specifications manual says), I only noticed when I was trying to plug in my Ozone Rage ST headset.
I searched online threads and found out that I needed an adapter and most people mentioned Headset Buddy. I couldn't find any adapters for sale in my country (or employees didn't really know what I was talking about) and since Headset Buddy is a bit expensive, I decided to try StarTech Headset adapter for headsets with separate headphone/microphone plugs - 3.5mm 4 position to 2x 3 position 3.5mm M/F www.amazon.com/.../ref=cm_cr_pr_product_top.
It arrived today and let me tell you that I can't make it work. I can hear everything but I can't get the external mic to work or even be detected. I have always used my headset (mostly for gaming) and I prefer to use my external mic rather than the internal one. First I connected my headphone and mic jacks to the adapter and only after that did I connect it to the laptop combo jack. I also tried vice-versa. It didn't work, regardless of the order. I even tried with a different headset and it still didn't work. What else can I do?
I have also found a thread on Dell forums saying that Headset Buddy doesn't even work on Dell Inspiron 15, model 3521. So since it doesn't work and I'm assuming StarTech doesn't, either, what am I to do/buy?! I am getting extremely frustrated and I'm very disappointed with Dell because the brand should have included with the laptop a proper working adapter for these situations and not make its customers buy an extra accessory to make whatever working gear they already had function. It just doesn't make sense to me! Either make the changes work properly or simply don't touch anything. I spent some of my savings on this laptop which, overall, is great but now I am being forced to spend more on an item to allow me to use my headset. I am running out of options here and even Dell can't seem to tell its customers with 100% certainty what really works for this specific model.
If I can't make the adapter work, I just hope I can return it, otherwise I'll end up with no refund and with a piece of equipment I have no other use for!
Any thoughts?

Hi,
Thanks for your reply.
This is the first time I was forced to buy adapters such as these so I don't know if I'm doing something wrong or if there's anything else I can do to make it work. When I plug the adapter to my Dell, the laptop presents me with several options such as: headphones, headphone, speakers, skull candy headphones, etc (maybe some may have different names but since I see them in Portuguese, I'm not quite sure how they appear for someone who has the computer in English), I have picked different options and it still doesn't work, the only noticeable changes are sound quality related, I guess.

What are the settings in Aperture to work with a Canon 9000?

What are the settings in Aperture to work with a Canon 9000? Canon website says Aperture is not supported. Is it True?

Do you mean the Canon PIXMA Pro9000 printer?
If so, does this help?
https://discussions.apple.com/thread/3681934?tstart=0

Why Model MD297AE/A is not working with Fcae time and Model MD293C/A is working in UAE with Facetime

Why Model MD297AE/A is not working with Fcae time and Model MD293C/A is working in UAE with Facetime.
In fact I have given my iPhone to my daughter to use in Canada (purchased from UAE ISP) she is unable to use Face Time within Canada. ?
Is it possibile to activate FaceTime in Canada if iPhone is purchase from UAE.
Purchase under Points by ISP (No contract)
Thanks
Abbas

Hello sir
I agree what u replied for the above question, but because of the UAE request, you cannot deactivate the facetime completely from this iphone, they should stop working through SIM network. The iphone is a universal mobile which can travel all over the world, many tourist people will suffer due to that, pls re-consider in taking back and try to make it upgrading this software.
Thanks
SATHISH KUMAR

Working with "Adaptive web service model"

Hi,
Please refer any blogs or documents related to working with "Adaptive web service model".
Thank you.
Regards
Bhanu.

Hi,
refer these,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d076c662-8c0f-2b10-8ca4-e63c26e2e489
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/900bbf94-a7a8-2910-e298-a651b4706c1e
How To Reimport Web Service Models in Web Dynpro for Java
The specified item was not found.
Using RFC as WebService in WebDynpro
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/wdjava/faq%2b-%2bmodels%2b-%2badaptive%2bweb%2bservice
http://help.sap.com/saphelp_nw04s/helpdata/en/46/ddc4705e911f43a611840d8decb5f6/frameset.htm
Regards,
ramesh
Edited by: Ramesh Babu V on Oct 20, 2008 2:44 PM

New iPhone &iPad 2 working with Extreme Base Station Model A1034

iPad 2 worked with Extreme Base Station Model A1034. Now new iPhone and now neither can connect to the Base Station. What could be the reason for the iPad 2 to stop working with the Base Station and why can't the iPhone use the Base Station? Thank you!

At this point are you saying that none of your wireless clients can connect to the AirPort? If so, then I would recommend that you do the following:
I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref:Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

Does 30 Gig Logic Board Work With A 60 Gig Model?

Does 30 Gig Logic Board Work With A 60 Gig Model?

It should work, but I would be careful just in case.

Lightroom (CC) 2015 is not working with Macbook pro 2015 model ! any clues about it ??

lightroom (CC) 2015 is not working with Macbook pro 2015 model ! any clues about it ??

Ahmed
Generally signing out and signing in (signing out and back into the Creative Cloud application ) will fix this. If it isn't resolving the issue for you, let us know what you see and we can try something else.
Pattie

Would a Tamron 18-270 mm lens work with a Canon T51

This forum has been a blessing to me, and I am asking YET another question.
I just purchased a Canon T5i and two lenses, 18-135mm and 55-250mm, thanks to the direction of this wonderful forum.
I am also looking for a lens that would work as an "all-in-one" lens for my travel photography, as changing lenses is not something I like to do on my travels.
Has anyone had any experience using theTamrom 18-270mm with the Canon T5i? Is it compatible with this camera? I read some great reviews about the lens, but do need some information.
Thank you so much!!!!

Yes it will "fit" your T5i. Now will it work?
You already know my answer. I don't like off-brand lenses and this Tammy is no exception to that statement.
You might consider one review:
Slow and occasionally indecisive autofocus
Geometric distortion across much of the zoom range
Significant chromatic aberration at wideangle and telephoto (especially 270mm)
Macro performance rather compromised (very soft at F6.3, focus shifts on stopping down)
Uneven zoom action, zoom creep when not locked
Slightly sub-par build quality
What you already have is better than most of the off-brand lenses out there. That first concern on the list should turn you off on this Tamron.
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 8.7, Lightroom 5.7

How to get macbook pro to work with a canon wft-e6 wireless file transmitter

I recently purchased a Canon WFT-E6 wireless file transmitter for my 1DX Canon Camera. I can't find a way to set up my Notebook Pro to work with this device. Has anyone run into the same issue? and if so do you have a solution?

My guess is that you will see a wireless network in range using your Airport menu. The Airport menu looks like
. If it is all gray and nothing is inside of it, then the network was not properly setup. I do not have one, but if you tried to setup the network, and you can't see the device, then you might need Canon's support.

HT5633 can my ipad model Mc820LL work with a bluetooth keyboard model number IH-B-IP2103

can my ipad model Mc820LL with a bluetooth keyboard model number IH-B-IP2103

iPads work with bluetooth keyboards. What does this have to do with the Apple TV?

Which Speedlite Flash will work with my Canon Rebel EOS T3 1100 D?

Hi, I am new to the digital age and over 55 years old. My husband bought me a Canon Rebel EOS T3 1100 D in July. (I fought the "technological" upgrade until my old Canon film camera quit on me.) I've been taking pictures since 1966, so I'm not new to photographing, just to our technological advances.
I would so very much appreciate if anyone could help me with which Speedlite flashes will work with my specific Canon T3 Rebel 1100 D camera.
Thank you so much for your time.
Solved!
Go to Solution.

I've just received my 430EX II that I purchased for use with my Rebel T2i. The main reason I purchased the Canon product was....in 60 years of using Canon products I've never had a failure or a bad experience. I've been using the 430EX ll for a few days and I'm quite happy with the results. Far, far better than the built in flash. It's on sale now with free Fed X shipping. That's hard to beat.
Best of luck with your new camera.
Joe

Do the older 'film SLR' third party EF lenses work with new Canon DSLR's

I have an old film EOS Rebel G with two lenses (Sigma 28-80 Macro) & (70-300 Quantaray 1:4-5.6 LDO Macro).
I got away from the SLR style camera several years ago and am now looking to take the plunge again as the quality of the point and shoot and smart phones can't compare.
I tested both of these lenses on a friend of mine's Canon T3i. The lenses would not auto focus. I thought since his camera had the 'red dot' mount they would function but they would only work as a manual focus. My initial thought was that his camera is really designed to support the EF-S style lens that that is why it could not auto-focus.
Am I truly out of luck or will some of the higher end (full frame) DSLR's support the auto focus features of these lenses? Or do the new Canon's not support older third party lenses?
Thanks,
Chris

Hi New2dslr,
While older Canon EF lenses work with our new cameras, we can't be certain with third party lenses. If modifications for the lenses are not available from their respective manufacturers, I recommend investing in some good quality Canon lenses..
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

FCE working with a Canon HV10 model

Similar Messages

Maybe you are looking for