FCH9 did the work of FBRA too

Dear all,
As far as my concern, This transaction FCH9 should anule only the check and after this we need to run FBRA to create the reverse document of the ZP.
The situation is that when we run FCH9 the tx did both things, cancel the check
and reverse the document. So when he run the FBRA it doesn´t works,
because FCH9 had did it before.
Do you know why this could be happening?
Thanks & Best Regards,
Esteban

That seems weird that FCH9 also reversed the payment document. Are you sure that FCH8 was not used accidentally. People normally confuse the two.
Did this happen only once? If so it may be as I described above. If it is happening regularly I suggest you raise an OSS note because it is not normal.

Similar Messages

  • HELP NO Chapters from FCP and Compressor-Did the FCP markers correctly too.

    Hi Everyone,
    Having allot of good Beans with FCP.
    One problem though:
    1. Export to DVDSP4 with CHAPTER markers on my timeline and when I try to import my m2v file from Compressor its greyed out for some reason so, I drag it into DVDSP4 from finder and highlight my play button on the 1st template
    MENU: SET ASSET AND CREATE CHAPTER INDEX.
    It usually works great while it continues on but, I dont see my chapters anywhere.
    I know they are there but, someone on online here said that you dont see the chapters while in compressor (which I wish showed them in the preview windo to confirm they are there) but, have yet to see them who up in DVDSP4.
    I still think this is a FCP inquiry but, trying to forums.
    HELP<

    http://discussions.apple.com/thread.jspa?messageID=2010186&#2010186
    Has some info on Chapter Markers to help.
    Are you exporting the markers when you export from FCP? Are you adding them and making sure that they are on the timeline (not the track) in FCP? (If you open the movie in QT you should see the markers on the lower left in a crop down selector if they exported properly.)

  • HT1386 It says to click the device button in the upper right corner....there isn't one.  Itunes doesn't even recognize my devices since I did the most current update.  I have two iPhones, thru different carriers, and neither one works now!

    I did the latest iTunes update...I have 2 iPhones--each thru a different provider.  Now, I can't sync to download any music from iTunes.  iTunes doesn't recognize either device now.  I went thru diagnostics, didn't work.  I tried the suggestions from Apple...it says to click the device button in upper right corner....there isn't one.  When I connected each for the first time after update, it "installed device drivers".  I have checked for further updates on iTunes--nothing.  I made sure there were no updates listed for iPhones...all up to date.  I get an error code and from what I have looked through in forums etc, it seems like a lot of people are getting it...0ex000084 I believe it was.  Windows opens to download photos but that's it.  Devices are not listed at all.  I have tried all 3 USB ports in computer too.  I have never had any problems before this update!!  HELP!  I just bought $15 worth of music I can't download to phones now!

    On the left hand side of iTunes do you have the sidebar up left hand side?
    If this is not up then try this, with iTunes open press "Control" and "s" together and it should bring it up. From the sidebar it should show an option devices with the iPhones underneath it.

  • I recently did the iOS 7.0.2 update, now I'm unable to purchase apps. "App could not be purchased at this time. Please try again later. ". I have tried a few of the suggestions and nothing has worked. Reset,change auto lock time on main screen, now what??

    I recently did the iOS 7.0.2 update, now I'm unable to purchase apps. "App could not be purchased at this time. Please try again later. ". I have tried a few of the suggestions and nothing has worked. Reset,change auto lock time on main screen, change language setting. Now what???

    This sorted it for me:
    Backup your iPhone to iCloud (I believe backing up to iTunes will work too). Now go to "Settings --> General --> Reset --> Erase All Content and Settings" to completely restore your iPhone to factory settings. Assuming you've backed up to iCloud, you'll be asked when setting up your iPhone if you want to restore from an iCloud backup. Choose that option and once your iPhone has restored itself from your backup, this annoying problem will finally be gone! (was for me anyway).
    To restore from an iTunes backup, connect your iPhone to your computer, load iTunes. Click the File menu and select Devices > Restore from Back up.

  • TS1538 I plugged in my iPad into my computer, I did the "hold the power button, then the home button simultaneously" stuff to try to downgrade my iPad. But I forgot that my compiter had a virus, but it was too late. My iPad won't come back on. What do I d

    I plugged in my iPad to my Windows 8 computer via USB- 30 pin iPad 3 connector cable because I wanted to downgrade my iPad for a reason. I did the method where you completely shut off your iPad, hold the power button for 3 seconds, then simultaneously hold down the home button and the power button, etc. I forgot that my computer had a virus that my dad was about to remove, but it was already too late. The apple "boot-up" sign disappeared like right when I released the button, and my iPad wouldn't turn on anymore. It has been about an hour now, and it still doesn't work. Do you guys think that I have any chanceof waking up my iPad ever again?

    What do you mean by "downgrade my iPad for a reason"?  You cannot downgrade an iOS device.
    A virus on the computer should not affect your iPad unless it has been jailbroken, it has no access to the operating system otherwise.
    Clean up the computer, then do a reboot of the iPad by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears.
    If that does not help, you will have to restore it using the recovery mode, instructions for doing that are found in http://support.apple.com/kb/HT1808.

  • Hello I am experiencing some problems for my iMessage and FaceTime. I did the steps the Apple provided online and I still can't get it to work. My updates are up to date. Everything is working fine it's just that the Apple iMessage won't except anyth

    hello I'm experiencing some problems with my iMessage and face time. I did with Apple provided me online. I did the steps. Nothing will work, it keeps saying activation turn on Wi-Fi when my Wi-Fi is turned on. As soon as I got this on Christmas. iMessage and FaceTime have not been working. My Apple and ID password are correct. Everything else is working fine. My iOS updates are up to date, everything is fine except FaceTime and iMessage

    Did you try everything here?
    iOS: Troubleshooting Messages
    Using FaceTime and iMessage behind a firewall
    iOS: Troubleshooting FaceTime and iMessage activation
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    In the future saying your tried the Apple on-line articles does provide us with information as to which ones you found and tried

  • I am on windows 7 and I upgraded to 10.0.2 and now it will not open. I have removed firefox completely and uploaded it again and that did not work. So my latest attempt I removed firefox 10 again and uploaded the beta version and once again nothing.

    I am on windows 7 and I upgraded to the newest verison of firefox and now it will not open. I have removed firefox completely and uploaded it again and that did not work. I then made sure it could get through my firewall and that did not work. So my latest attempt I removed firefox 10 again and uploaded the beta version hoping that would do it and once again nothing. It will not open at all. Please help - is there a live chat or a number to talk to someone at Firefox?

    I think when uninstalling you may also have to choose (tick) to delete the preferences and other personal data like the bookmarks, stored passwords etc. to erase completely. If you are installing afresh, please try right-clicking on the file and '''Run as administrator''' to install. And when uninstalling, please also make sure choose to delete all data and also manually delete any '''Mozilla''', '''Mozilla Firefox''' or '''Firefox''' from %appdata%, %localappdata% and %programfiles%. You can open a location by typing for eg. %appdata% in the '''Run''' box (Windows key + R). You may also have to check the '''VirtualStore''' folder in %localappdata%. Files in the VirtualStore can be problematic. I think a clean installation may help.
    [https://www.mozilla.org/en-US/firefox/new/ Firefox]
    [http://kb.mozillazine.org/Installation_directory Installation Folder]
    [http://kb.mozillazine.org/Profile_folder Profile Folder]
    Please note that using system restore would usually damage the Firefox installation.

  • I am not able to launch FF everytime i tr to open it, it says FF has to submit a crash report, i even tried doing that and the report was submitted too, but stiil FF did not start, and the problem still persists, please help me solve this issue in English

    Question
    I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
    '''(in English)'''

    Hi Danny,
    Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
    but not 180, right?
    I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
    =COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
    or
    =SUM(IIF(Fields!TICKET_STATUS=4,1,0))
    If you still have any problem, please feel free to ask.
    Regards,
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • My iPod 5 will not sync ANY music. All my music was on prior to syncing. The sync deleted all my music. I can now no longer add any music. I have the "sync music" checked. Restoring factory settings did not work. Any thoughts?

    All my music was on prior to syncing. The sync deleted all my music. I can now no longer add any music. I have the "sync music" checked. Restoring factory settings did not work. Any thoughts?

    When you synced with iTunes It would have tried to replace the music on the iPhone with what is on the computer. which is what happens when you sync with iTunes.
    If the songs are purchased you can re-downloaded them Pretty easily. You mentioned that you still see the songs and that you could not play them. Do they have a Cloud symbol next to them? If so this means that you can download them but that they are not on the device.

  • I recently tried to burn some photos to a disc.  It did not work, but then I ended up with a .fpbf folder on my desktop.  Can't trash it, and when trying to burn again, I get this "... can't be burned because the original items can't be found". Help???

    I recently tried to burn some photos on a CD. For some reason, It did not work.  Now I have a .fpbf folder on my desktop. I can't seem to get rid of it.  I tried dragging it to the trash, but then I get a box asking my to type my password it, so Finder can make the changes.  Doing so, does nothing at all.  And when I try to burn another CD from the same .fpbf file, I get a the following message: "There are 35 items that can’t be burned because the original items can’t be found. Skip the items and continue burning?".   When I skip and continue burning, nothing shows up on the CD.  In the meantime, the .fpbf folder is still in my desktop.  I tried changing the aliases on each pic, but it still doesn't work.  Any ideas of how I can remove this folder from my desktop?
    Thank you.

    Beavis2084,
    Thank you for your detailed explanation but something is seriously wrong with my computer. Although the method you have described is very similar to the one I tried in step 2 from my second post, I have since "done things" which may have complicated matters—or suggests that my computer has a more serious problem.
    Here's what I did:
    1). Installed Onyx and discovered that I had a .plist file (com.apple.iphotomosaic.plist) that was causing a Syntax error: "Conversion of data failed. The file is not UTF-8, or in the encoding specified in XML header, if XML." After doing some research online, I was given the understanding that downloading the iLife update 9.0.3 (I installed the more recent version, 9.0.4) would solve this problem because it would also fix some system issues. So, I downloaded it...and when it didn't solve the problem, I decided to just deleted that .plist file.
    2). I read your knew post and decided to follow your directions, even though I realized they were basically the same steps I followed in the 2nd method I mentioned earlier. I say "basically" because, for some reason, after inserting a blank disc, my computer does not open the disc in the Finder. Instead, it places the blank disc's image on the Desktop, even though the Finder's Preferences and the System's Preferences are set to have it open in the Finder—nothing should be on my Desktop! (Note: When transferring the items (all folders) I want to burn to the blank disc, I did not use the Option-Click-Drag method as before, I used the Click-Drag method, which created the curved arrow in the lower left corner of each item.)
    Now, for the result of "method 2," the method we basically have in common, the computer goes through the burn stage but, in the verify stage, tells me that it is unable to verify the disk, suggests that my DVD may be unreliable and that I should try another disc, and then tells me about some "fork" (?) error (-43).
    I don't know what to do anymore...

  • I was using Lightroom v5.6 when a notice came up to update to v5.7.  I did the down load but must have gotten a bad down load because it will not install.   And the old 5.6 on my desktop will not work.   So no 5.6 or 5.7 . any ideas  how to get something

    I was using Lightroom v5.6 when a notice came up to update to v5.7. So I did the download but it would not work or install.  And the 5.6 version will not work now either.   So I am screwed - no 5.6 or 5.7 and no access to Adobe Tech.   Any help will be appreciated.

    My iPod is a click wheel...I think that's fifth generation?
    I've always used my firewire cable to update my iPod. I've tried using USB in the past but for some reason it always says that my iPod has low battery and won't let me update it, so I just use firewire. Can I not use firewire with itunes 7?
    I'll try using the USB again. It's laying around here somewhere. Just gotta find it.

  • My iPhone safair says it cannot open because it is not connected to the internet.  What do I do? I do not believe I changed any settings.  I have turned the phone off but this did not work.

    Safari cannot open because the iPhone is not connected to internet.  I do not believe I have changed any settings.  I have turned off the phone and then on, but this did not work.  Help?

    For Safari to work, you need either Wi-Fi or cellular data.
    Are you connected to a Wi-Fi hotspot?
    If not is Settings > Mobile/Cellular > Mobile/Cellular Data: ON

  • HT5654 Just tried 3 times to update iTunes on my PC running Vista.  There was an error.  It stopped the installation.  Now iTunes will not start at all.  The error message tells me to reinstall which I tried but did not work.  What should I do?

    Just tried 3 times to update iTunes on my PC running Vista.  There was an error.  It stopped the installation.  Now iTunes will not start at all.  The error message tells me to reinstall which I tried but did not work.  What should I do?

    Hello, Jdragone. 
    Thanks for the question.  Start with completely uninstalling iTunes and all of it's components in the order specified in the article below.  Once this is done, download and install iTunes.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    If you receive any errors when uninstalling any components of iTunes, try the steps in the article below for each component that gives you an error.
    "The feature you are trying to use is on a network resource that is unavailable" alert appears when removing Apple software in Windows
    http://support.apple.com/kb/TS3704
    Cheers,
    Jason H.

  • I just got a new macbook pro. How do I get the 900  songs that I took off of cds into iTunes on my computer from my iPhone. I had no problems syncing the music I had purchased from iTunes. I have tried to sync it using iTunes match, this did not work.

    I just got a new macbook pro. How do I get the 900+  songs that I took off of cds into iTunes on my computer from my iPhone. I had no problems syncing the music I had purchased from iTunes. I have tried to sync it using iTunes match, this did not work. I would like to have access to my full library without going into the user profile of my old computer, which is on my new computers hard drive. I would like to eventually delete the old profile so that I have more space on my hard drive.

    http://support.apple.com/kb/HT4527?viewlocale=en_US&locale=en_US

  • I cannot access the internet, I tried to answer that said to go to settings, safari, tap clear history, cookies and cache, cut off, then on, but it did not work.  When I go to internet the screen is grey??? please help I am a new user!!

    I cannot access the internet the screen is grey, I have tried by using the answer from someone but it does not work...I went to settings, tap safari, then clear the history, cookies, and cache, then turn off ipad.  When I did that twice, it did not work.  How long does it take for the clear history to work?  I am a brand new
    user of the ipad2 and I am disappointed that this is happening already.

    Have you been able to access the internet previously and now it's suddenly not working, or are you still trying to access the internet for the first time on your iPad?  Are you at home trying to connect through your home router?  If you are at home, did you put your home routers encryption code as your password?  The encryption code is what your iPad is looking for and it is usually found on the router and is typically a 13 digit combination of letters and numbers.  Let us know......

Maybe you are looking for

  • Web Service Security is not working when migrating application from Tomcat

    Hi, We have a application running successfully in tomcat6 It calls a Webservice call through TIBCO BW interface. When we deployed the same WAR file in Weblogic 10.3.2, it gives me a error on Prefix[ds] not able to locate namespace URI not found error

  • Hard drive wont work on leopard after using mountain lion

    My current imac at home runs on 10.5.8 which i think is Leopard. I have been using an external hard drive for over a year with my mac.  A few days ago i decided to use my hard drive on my work imac which runs on the new Mountain Lion operating system

  • How to add an image in a JPanel

    Hi All, How to add an image in a JPanel and make it display. Thanks,

  • Difficulty displaying numeric info in text field

    I'm trying to display the playheadTime of an FLV movie (called vid_player) on the stage in a test field (called myTextField). I used to be able to do this in older actionscript, but with AS3, I'm having a heck of a time. Here's my code: function getC

  • IPad 2 "stuck" on mute and how I fixed it.

    Did not see a discussion related to this, so forgive me if I'm addressing something that's already been addressed. Sometimes I notice that I'm not getting sound from my apps, even with the sound turned up. I discovered that this happens when the side