FCIP interface stuck at initializing on 9216i v2.1a (vsan segmented)

Following the instructions in both the config guide and troubleshooting guide to configure the FCIP profile and interface, my fcip2 interface status is stuck at initializing. Looking in FM events tab, I can see that the 9216i's are cycling between these states: vsan merged; N_Port unmanageble; vsan segmented and N_Port Up. show fcdom domainlist on the higher priority switch shows it flip-flopping between [local] and principal] [local] states. Using show zoneset active, I can see the zoneset being transfered over to the 2nd switch. Despite all this, the fcip interface does not stay up. Thanks for helping.

Just going from your info, it sounds like the interface comes up for a little bit of time. More than likely then, the issue is MTU. You have an MTU configured larger than somewhere in the network can handle it. If you get the show log output and it shows alot of TCP retransmissions, this is the problem.

Similar Messages

  • Color Laserjet Pro MFP M177fw - stuck on initializing - fresh new printer not working

    http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Pro-MFP-M177fw-stuck-on-initializing/m-p/5097731/highlight/false#M194928 ==QTE==Two days ago I received my printer (same as in this thread) and I am experiencing the exact same problems which are described throughout this thread. The printer is stuck on initializing and makes continuous loud noises. Please let me know how this can be taken care of. I would either need to replace this product, or to have it fixed somehow. Await yours soonest.==UNQTE== ++ Ref to the question from the above thread, I also post it here as  a new question just to ensure that I get a response. Thanks beforehand and look forward to hearing from you. BrgdsErik

    Hi @SSAB ,
    I can send you that information in a private message.
    In the forum beside your handle name just click on the envelope to view it.
    What happened prior to this issue? (update, paper jam, changed toner)
    I would do a hard reset if you haven't tried this method.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation.
    If you need further assistance, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • When i open it gets stuck at "initializing installer" and the green bar doesnt move. How do i fix this so it installs?

    Adobe cloud setup downloaded off the internet just fine but when i open it gets stuck at "initializing installer" and the green bar doesnt move. How do i fix this so it installs?

    Multiredwolf123 have you utilized the steps listed in Error "Failed to Install" Creative Cloud Desktop application - http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html to resolve the current error?

  • Requests stuck in 'Initialized' and 'Received' status

    Hello.
    I perceiving that in my environment, the Requests, usually "Revoke and Disable" are stucked either "Initialized" or "Received" status. I do not know why.
    But, I saw that sometimes in the Resource of the User, the Resouce is Rrovisioning or Waiting.
    First question.
    If the Resource of the User is different of "enable or provisioned" status, this could interfering on the Request of Disabled or Revoke?
    Second question.
    How can I solve the problems of the "stuck requests"?
    Bye.

    Hey Daniel,
    Request status itself in OIM is not consistent. For the answer , you need to go through each step and record what your status is to know what the outcome is going to be. So, you should get different status's if you do more than into one task and also have actual approval tasks involved.
    I hope this helps,
    THiago Leoncio.

  • MFP M177fw stuck on initializing

    My printer stucks on initializing. Tried to cut the power off and start it again. Doesn't work. The toner carousel doesn't rotate either. What should i do?!

    Hi , I read your post and see that the new printer is stuck initializing. I will certainly do my best to help you.
    Disconnect the USB/Network/FAX and power the printer on Standalone. Check and remove any packaging material inside the printer and toner. Setting Up the Printer Hardware for HP Color LaserJet Pro M177fw MFP Printers. Do a hard reset to see if that will resolve the issue.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation. If the issue persists, perform a power drain by disconnecting the power cord from the back of the printer and keeping the power button pressed for 30 seconds and in case of a power switch keep the switch in ON position for 30 seconds before reconnecting the power chord. Try and update the printer's firmware. HP Color LaserJet Pro MFP M177fw. Please check your private messages for additional steps to try.
    In the forum beside your handle name just click on the envelope to view it. How is the printer connected? (USB/Ethernet/Wireless) If you appreciate my efforts, please click the 'Thumbs up' button below. Thank You.

  • Satellite A210/A215 recovery stuck on "Initializing the Partition"

    Model: Toshiba Satellite A210/A215
    Task: System Recovery
    Problem: Stuck on "Initializing the Partition"
    A few months ago, my Satellite A210/A215 suddenly wouldn't start Windows, and after a few tries of restarting, said that there was no operating system. I'm currently in the process of trying to perform a full system recovery; however, the recovery seems to have stopped on "Initializing the Partition." Now, as the recovery process had been moving quite slow before anyway, I allowed the computer to sit over night. This morning, the computer is still on "Initializing the Partition". Any suggestions would be great!

    Are you using the recovery partition or recovery discs?
    For now, I'd suggest giving up on that trial and trying again. You might as well give it a few tries even if the second one doesn't take! If you try a few times and it still won't go, it sounds like the hard drive itself might be bad.
    - Peter

  • Application Server Administration Service Timer Job stuck at Initialized 0% . Config Cache clear doesnt Help.MOSS2007

    Hi All,
    One of my WFE/Query server for MOSS is showing Application Server Administration Service Timer Job  stuck at Initialized  0% in CA timer Job status. 
    In timer Job Status in CA under the SSP Job Control service I find the Application Server Administration Service Timer Job  struck at 0%
    I have tried Clearing config cache of the Farm . I have tried disconnecting this server from Farm and reconnecting it with Psconfig UI, I have tried running Psconfig.exe on the affected server. But even after doing this service is stuck at 0%
    If I exit the OWSTimer.exe from task manager, it shows aborted at 0% . I am using a single SSP and reconfiguring SSP is not an option right now.
    Any help regarding it will be greatly appreciated.
    Regards,
    Rohit

    Hello,
    Have you changed the password recently? Also try to restart the windows timer service on all server.
    You might also want to check these threads:
    http://sharepoint.stackexchange.com/questions/44073/why-timer-job-stucks-at-initialized-status
    http://social.msdn.microsoft.com/Forums/en-US/d238cc1c-5c41-4762-9878-020cb36679c3/wss-30-workflow-timer-job-status-stuck-at-initialized-0
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/7d932581-91a9-41f2-8848-95f8a72ba19b/timer-job-initialized-0?forum=sharepointadminlegacy
    Hemendra:Yesterday is just a memory,Tomorrow we may never see
    Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • After effects cs6 gets stuck on initializing mediacore after is been used.please help

    Everytime I use after effects cs6 and then want to open it again it gets stuck on initializing mediacore. I then have to restart windows or my computer to make it work again. Please hel. Thanks

    We need to know a lot more to help you. Please provide answers to the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"

  • ITunes installation always get stuck on "Initializing QuickTime types"

    Whenever i try to install iTunes and QuickTime it always get stuck on "Initializing QuickTime types."
    I am not able to update my software!
    Please Help!

    Me Too!!
    I have XP SP3. Intel pentium 4 2.6Ghz. 4Gb RAM. 116GB open on one HDD, 72GB open on the other.
    I'm on Admin access level.
    I'm trying to install iTunes 7.7 bundled with Quicktime 7.5.
    I emptied my temp folders.
    I shut down my antivirus and anti-spyware.
    I shut down all non-essential startup menu items.
    My folder names dont have unusual characters.
    I have uninstalled all versions of Quicktime and iTunes and iPod updaters from my machine.
    Still no luck.
    When Installing the Quicktime application, the entire machine locks up when it gets to the "Initializing Quicktime types" segment of the install.
    I have left the machine on its own for up to 14 hrs and it never does regain normal function.
    The only way to regain control is to reset or hard shutdown.
    Can someone please respond to this so my daughter can use her 2 month old graduation present?
    Thank you so very much.
    PS:
    How about standalone downloads for each application?
    And, how about patches so the download doesnt take so long and the installation doesn't need to be so intrusive?
    Message was edited by: Jeteye97

  • After effects is stuck on initializing media core

    Well the title says it all. When ever i try to start up After Effects it just gets stuck on initializing media core. I looked on one of you're posts where it said enable a few of adobe products to be allowed on the firewall and i did but it still wont open it. Please respond asap.

    Considering the wealth of information you've supplied about your system, the versions of software you're running and any ancillary cards you have have installed, here's my best guess given the facts at hand:  AE doesn't like you any more.  What did you do to make it so angry with you?
    First, you should apologize to AE.
    Then you should UNINSTALL Quicktime X and install the latest version of QT7.

  • It is stuck on Initializing Installer???

    I am on PC and when I double click the icon to install I the green bar moves a little but stops after about 20 seconds and it is stuck on initializing installer. Tried restarting and re downloading nothing helped.

    Hi Poke,
    Please refer to the help document below to fix the error:
    Error: "Installer failed to initialize" | Windows
    You may also refer to the threads below where this issue has been addressed:
    Creative Cloud Installer not Initializing AGAIN.
    Installation - stuck on initializing
    Re: App Installer Freezes at "Initializing Installer"
    Regards,
    Sheena

  • Printer stuck on "initializing"

    I purchased the printer in February 2015 (less than 6 months ago) and connected to my network wirelessly (plugged in via surge protector that was brand new).  Every thing was great until a week ago.  The printer power went off and when it came on, it stayed on the initializing screen.  I let it go for 48 hours, no change.  I unplugged for an hour and replugged it in, no change.  I unplugged for 3 days and tried again, no luck.   I came to the forums and tried the steps recommended in another post: Attempted a hard reset (unplug while still on and wait 60 seconds, reconnect to wall outlet) - nope Attempted power drain (unplug while keeping power button pressed for 30 seconds) - nope Attempted to update software via HP Support Assistant on my computer, all updates current and no change I even went as far as uninstalling the printer and software from my computer and attempting to reconnect via USB connection - that solution was problematic as the printer never made it to ready mode to install software. Attempted to intall for wireless network but I can't get to the wireless menu on the printer due to it being stuck on initializing. Please help, I am becoming more frustrated by the day and can't go much longer without the printer.  I invested more money to ensure that I would have a quality, reliable printer.  Cheaper printers did not fizz out on me this quickly! 

    Hi , I see by your post that the printer is stuck initializing. I would like to help you.
    I will send you another step to try in a private message.
    In the forum beside your handle name just click on the envelope to view it. If the issue continues, please Contact HP Support for further assistance. Fill in the model number and the form to receive a case number for quicker assistance. If you appreciate my efforts, please click the 'Thumbs up' button below. Thank You.

  • CAPTURE stuck on INITIALIZING

    I've removed an existing streams configuration. It appeared to be successful.
    However, now that I attempt to define a new configuration, I encountered the following problem:
    Capture process status seem to be stuck on INITIALIZING, sometimes moving to DICTIONARY INITIALIZATION and back.
    I've read that this could be a problem with finding the archive logs to process, so I checked first_scn of the capture process to see what scn we need next.
    And then checked:
    SELECT r.CONSUMER_NAME,
    r.NAME,
    r.FIRST_SCN,
    r.NEXT_SCN,
    r.PURGEABLE
    FROM DBA_REGISTERED_ARCHIVED_LOG r, DBA_CAPTURE c
    WHERE r.CONSUMER_NAME = c.CAPTURE_NAME;
    To see which log files are needed, and indeed one of them contained the scn I found before.
    Then I checked that the files in the result of that query indeed exist at that location, and they do.
    What am I missing?

    I suspect you still have an SCN initialisation on.
    did you also abort the SCN initialisation on the schema for apply and capture when you removed the streams ?
    on 10gR2
    for capture :
    execute DBMS_CAPTURE_ADM.ABORT_SCHEMA_INSTANTIATION( schema_name => 'owner');
    for apply
    execute DBMS_APPLY_ADM.SET_SCHEMA_INSTANTIATION_SCN( source_schema_name => 'owner , source_database_name => 'SOURCE_DB_LINK_NAME' , instantiation_scn => null , recursive => true);
    or also :
    exec dbms_streams_adm.remove_streams_configuration;

  • Updater stuck on "initializing", iTunes wont recognize Ipod anymore

    Hi,
    Just got a new Ipod over a week ago, uploaded all my songs and everything seemed to be fine...until today - i've recharged it on my laptop and tried turning it on but it didn't work - went on the support site and finally restored the iPod to Factory Settings. When I connected my iPod again to the Laptop, iTunes didn't recognize my iPod. So I've downloaded the latest iTunes and tried updating the software.
    Now, when i try to update with the iPod Updater 2006-03-23, it gets stuck on "initializing" and iTunes won't recognize my iPod either.
    When I click on My Computer, it comes up as "Removable Disk E" and in Device Manager, it comes up under Disk Drives "Apple iPod USB Device"
    When i switch on my iPod, it seems to be working fine...but i just cannot download any music on it coz my iTunes won't recognize it...
    Please help!!!!
    I use Windows XP, Dell Inspiron 630m and iPod 30GB
    Thanks,
    Cornelia
    Dell Inspiron 630m   Windows XP  

    thanks, i'd appreciate that...
    i went to the ipod store today and have been told that my ipod is fine but my software causes the issues. I'm supposed to delete everything and restore again. Trying to do that now but it's still not working yet. I had Tunebite installed to convert wma to mp3s as well, that might have caused all the trouble. there might probably still some hidden files i didnt get rid of because when i reinstall iTunes, my iPod is still not recognized... i keep u posted as well...

  • Hyperion Uninstall stuck on Initializing

    Hey all,
    When attempting to uninstall using either Add/Remove Programs or Uninstall.cmd, I can make it all the way through product selection and confirmation, however once running the uninstaller is stuck on initializing.
    On attempting to perform a manual removal I am unable to get all components. Deleted Hyperion folder and vpm.properties and relevant registry entries, but it still shows as installed when attempting to perform a reinstall.
    Anyone have any ideas on how to make the uninstaller work (which should be a given) or where to find any remaining components for manual removal?

    Under the installation directory you will find two files set_hyphome_1.bat and .oracle.products. Make sure you delete these two files.
    It is better to go ahead with uninstallation through Oracle EPM System-->Foundation Services--> Uninstall EPM System instead of deleting the Deleted Hyperion folder and vpm.properties and relevant registry entries.
    You might face issues while reinstalling the EPM System all again. Try installing it on the different drive on your machine.
    eg: If You have installed it on C drive the path where you will get set_hyphome_1.bat and .oracle.products.
    C:\Documents and Settings\<name>\

Maybe you are looking for