FCKR-No FI Document Found
Hi all,
I am trying to process a bank file to clear checks in sap and marked them as encashed.When i upload the file it recongise every details and also check number but don't find payment document associated with that check. I ran the same check in FCHR and system posted the FI document.The error message in FCKR says"Check number 0000000311782: No posting - no FI document found.
Any idea where to look,Thanks
Regards
Shaun
Hi Maverick
I am also facing the same issue i had created a txt file as Check_head and Check Rec
but still check number is not able to get the Check number from the check register and check
document database kindly share what are the steps need to check
thanks in Advance
Trinath
Similar Messages
-
"Empty document Found" error while sending a text file
Below is the error I'm getting while I'm trying to send a txt file using a fiel adapter.
Channel FILE_TLE_Sender_SalesOrder_CC: Converted complete file content to XML format.
Channel FILE_TLE_Sender_SalesOrder_CC: Empty document found - proceed without sending message.
File "/data/TLE/XS1/inbound/850/Test_SalesOrder_3064_12-15-10.txt" deleted after processing.
On the Communication Channel this is what I have:
Recordset Name: DOCUMENT_ROOT
Recordset Structure: DOC_HEADER,1,PO_HEADER,1,TAX,,FREIGHT,,SPECIAL_SHIP,,DOCUMENT_NOTE,,SHIP_TO_ADDRESS,,PRODUCT,,LINE_SHIP,,LINE_ITEM_NOTE,,ASSOC_LINE,,ORDER_MEMO,,DOC_TRAILER,1
Key Field Name: keyfield
DOC_HEADER.fieldNames Value: keyfield,Source_System,Source_SUB_System,Source_Doc_Type,Source_Doc_Gen_Date,Source_Doc_Gen_Time,Source_Company,Source_Division,Source_Party_ID,Source_Ship_Location,Source_Sell_Location,Event_Name,Application_Program_File,Application_Program_Name,Destination_System,Destination_SUB_System,Destination_DOC_Type,Destination_Company,Destination_Division,Destination_Party_ID,Destination_Ship_Location,Destination_Sell_Location,Interchange_Control_Number,Group_Control_Number,Document_Control_Number,Date_Translated,Time_Translated,Primary_Key
DOC_HEADER.fieldFixedLengths Value: 30,30,30,30,10,4,30,15,30,20,20,8,30,30,30,30,30,30,15,30,20,20,10,10,10,10,4,30
DOC_HEADER.keyFieldValue Value: DOC_HEADER
DOC_HEADER.lastFieldsOptional Value: YES
DOC_HEADER.endSeparator Value: 'nl'
Then I have same pattern for PO_HEADER, TAX and so on....
Can someone tell me why this error is happening? I'm using the same exact parameters in another XI environment and there's no error there.> Channel FILE_TLE_Sender_SalesOrder_CC: Empty document found - proceed without sending message.
> Can someone tell me why this error is happening?
Maybe your source file is empty?
This is exact what the error message says. -
No subsequent document found in Accounting
Hi Experts,
we have created subcontractiong PO for 250 QTY.....The user done the g/r for 200 qty on march 5th 2014...MM Document created but there is no FI Document,,, bellow is the Error message..
No subsequent document found in Accounting
Message no. RW011
Diagnosis
All documents generated in Financial Accounting for object type 'MKPF',
reference document number '5005743936' and organizational unit '2014' should be displayed.
System Response
No accompanying documents were found in Financial Accounting."
And for the Same PO user done the G/r FOR 40 qty.. on march 20 2014,,This time FI document and CO documents are generated...
Frist user and Second user are diffrent users..
What might be the reaon in frist time there is no FI document and Second time FI document generated..
There is changes in PO item level..
Price is the there in mm from the begining.
Its not non valuated materila
Regards,
RamHi,
the messages just says that there is no FI document created with the listed reference information.
Check SAPNE note 1949677 and the listed notes there, maybe thats an explanation for your case.
Ask your SAP base consultant if there have been update terminations in the system at 5th of march.
BR Christian -
Receiver File Adapter - Empty document found error
Hi,
I have a slight issue that I do not understand.
For example, I have a file that is 256 bytes in size and definitely has some content. However, when the file adapter processes the file it says in the log "Empty document found" - but I can see the file has content.
Any ideas ? I am using using XI 3.0 SP19.
Cheers
Colin.hi colin,
i will agree with u,
may be the XI can not understand your test data,
can u tell me the language of test data.
In file adapter go to encoding select TEXT and UTF-8.
may be this will works.
regards
sandeep. -
Empty Document Found: Problem due to FCC
My scenario relates to a Sender File Adapter and a Receiver IDoc Adapter. My Outbound Message Type / Data Type has multiple Complex elements which I later replicated to only three(3) Complex elements to simplify checking the issue. The elements defined in IR are as follows:
1.EDI_DC: Element occuring once with multiple fields
2.E2IDKU1: Element occuring 0..unbounded with multiple fields
3.E2EDKO3: Element occuring 0..unbounded with multiple fields
IDirectory has a Sender File Adapter has a Communication channel with the following specifed in FCC:
Document Name: MT_RecManager_Test_O
Document Namespace: http://mrgnetwork.com/WF/RecManager
Document Offset: <nothing specified>
RecordSet Name: RecordSet
RecordSet Namespace: <nothing specified>
RecordSet Structure: EDI_DC40,1,E2IDKU1, *,E2EDK03, *
RecordSet Sequence: Ascending
RecordSets per Message: *
KeyFieldName: SEGNAM
KeyFieldType: String(Case Sensitive)
EDI_DC40.fieldNames: SEGNAM,MANDT,DOCNUM,DOCREL,STATUS,DIRECT, EDI_DC40_FILLER1
EDI_DC40.fieldFixedLengths: 10,3,16,4,2,1,6
EDI_DC40.keyFieldValue: EDI_DC40
EDI_DC40.missingLastFields: add
EDI_DC40.additionalLastFields:ignore
EDI_DC40.endSeparator: 'nl'
E2IDKU1.fieldFixedLengths: 30,3,16,6,6,2,3,35,35,3,3
E2IDKU1.keyFieldValue: E2IDKU1
E2IDKU1.fieldNames: SEGNAM,MANDT,DOCNUM,SEGNUM,PSGNUM,HLEVEL,BGMTYP,BGMNAME,BGMREF,BGMLEV,BGMACC
E2IDKU1.missingLastFields: add
E2IDKU1.additionalLastFields: ignore
E2IDKU1.endSeparator: 'nl'
E2IDKU1.keepIncompleteFields: yes
E2EDK03.fieldFixedLengths: 30,3,16,6,6,2,3,8,6
E2EDK03.keyFieldValue: yes
E2EDK03.fieldNames: SEGNAM,MANDT,DOCNUM,SEGNUM,PSGNUM,HLEVEL,IDDAT,DATUM,UZEIT
E2EDK03.missingLastFields: add
E2EDK03.additionalLastFields: ignore
E2EDK03.endSeparator: 'nl'
E2EDK03.keepIncompleteFields: yes
ignoreRecordSetName: true
The test file contents are as follows: (please note that I have pasted the file contents in this limited "Plain Text" field, the lines are wrapping around):
EDI_DC40 4000000000000000000700 302112233445566
E2IDKU1 100000000000000000000000100000001LBXLOCKBX 1
E2IDKU1 200000000000000000000000100000001LBXLOCKBX 1
E2EDK03 10000000000000000000000020000000201120081114092712
When I run the above file contents with the FCC RecordSet as follows, the Payload is empty and I receive a message that: Empty Document found. Proceed without sending message
RecordSet Structure: EDI_DC40, 1,E2IDKU1,,E2EDK03,
When I run the above file contents with the FCC RecordSet as follows, the Payload is correctly formed and I receive my message in the Integration Engine and can see it in SXMB_MONI:
RecordSet Structure: EDI_DC40, 1,E2IDKU1,2,E2EDK03,1
I want to be able to specify an asterisk "*" in RecordSet Structure as the file contents can vary for KeyFields E2IDKU1 and E2EDK03.
I have seen various messages in SDN referring to checking the File contents and FCC and I have already done so without any results. This feature has been widely used in PI. Is there a change in PI 7.0. We are currently running PI 7.0 / SP12. Please advise.
Channel <Channel Name>: Empty document found. Proceed without sending message.
Please note that as stated before that if I change the RecordSet Structure and DO NOT specify an asterisk "*", I do not get the "Empty document found message" and the message actually appears in Integration Engine with a payload.
Thanks in advance for your input.
Edited by: Ravinder Masuta on Nov 25, 2008 3:43 AM
Edited by: Ravinder Masuta on Nov 25, 2008 3:45 AM
Edited by: Ravinder Masuta on Nov 25, 2008 3:47 AM
Edited by: Ravinder Masuta on Nov 25, 2008 3:48 AMi missed the asterick
RecordSet Structure: EDI_DC40,1,E2IDKU1,*,E2EDK03,*
If you give the above recordset structure, what is the result? -
Empty document found. Proceed without sending message
Hi All,
I have a file CC and it works fine , simple file.
But when I add Trailer to it... then I have no output file..Instead the CC channel shows that the document is empty and cannot proceed:
Here is the details ( Watch the Trailer added)
ZOUT_MT 11 -ZIN_MT 11
Recordset 1--1
Rec 1unboundedTest01 1-----unbounded
key(string) 1...1----
key 1..1(string)
name11(string) 1..1----
name21 1..1(string)
name12(string) 1..1----
name22 1..1(string)
Trail 1...1 -
Trail 1---1
key(string) 1..1 -
key 1..1(string)
test(string) 1...1 -
test1..1 (string)
In Config: Sender File CC
Doc Name :ZOUT_MT
Doc namspace : http://mytest.com/test1
RecordsetName : Recordset
Recordset Structure : Rec,*,Trail,1
Key Field Name : key
Recordset per message : 1
Rec.fieldNames : key,name11,name12
Rec.fieldSeparator : ,
Rec.endSeparator : 'nl'
Rec.processConfiguration: FromConfiguration
Rec.keyFieldValue : 1
Trail.fieldNames: key,test
Trail.endSeparator: 'nl'
Trail.processConfiguration : FromConfiguration
Trail.keyFieldValue : 1
Trail.fieldSeparator : ,
From all this work above , when I put the file having:
1,111,112
1,222,223
1,333,334
1,99
The output file in empty (null)...
Does anyone out there understand why the output file is becoming null..
here is the log I get in workbecnh (commuunication channel)
Audit Log for Message: c1a434f5-ad9f-4a26-08c1-e7d579a5927a
Time Stamp Status Description
21.01.2009 11:48:22 Success Channel ztest_sender_cc: Entire file content converted to XML format
21.01.2009 11:48:22 Warning Channel ztest_sender_cc: Empty document found. Proceed without sending message
21.01.2009 11:48:22 Success File "/mylocation/interface/SCM/somefolder/in/shilpagirlsinput.txt" deleted after processingkeyFieldValue must be different for Rec and Trail, keyfield is to distinguish Rec and Trail, their value must be different, otherwise how can you tell which record is Rec, and which is Trail?
Try to put different keyfield value, chang the input file and run the scenario.
Also because you specified cardinality 1...1 for Trail element, and 1 is used as keyfield for Rec, XI thinks there is no Trail in the outbound file, thus it produces empty document warning as Trail is required to be present by cardinality 1...1
Jayson -
FCC problem: Empty document found. Proceed without sending message
Hi all,
I am doing FCC to FCC scenario.
In that I am getting the following message in Communication channel Monitoring.
<b>Channel CC_File_FILBAS009_Sender</b>: Entire file content converted to XML format
<b>Channel CC_File_FILBAS009_Sender</b>: Empty document found. Proceed without sending message
File "/temp/xidelivery/send/FILBAS009_input.txt" archived after processing
and My File structure is as follows..
RS
-HEADER
Field1
Field2
Field3
-DATA
Field4
Field5
Field6
-TRAILER
Field7
Field8
Field9
FCC Parameters are:
RecordsetName : RS
HEADER.fieldFixedLengths : 5,1,5
HEADER.fieldNames : Field1,Field2,Field3
HEADER.keyFieldName : Field2
HEADER.keyFieldValue : 'H'
HEADER.endSeparator : 'nl'
In the same way I gave conversion parameters to DATA and TRAILER also.
Can any one tell me what is the problem?
Regards,
Pavanihi pavani,
excuse me about my previous reply.
I was just checking your FCC parameters. I see fieldseparator missing and also is it possible to paste sample input data.
I fieldsepartor is also not necessary since you have fiexedlengths. Since you say FCC to FCC and you paste the receiver FCC parameters
regards
Ramesh P
Message was edited by:
Ramesh P -
Error: Empty document found - proceed without sending message.
Hi,
I am using FCC in my Sender CC.
Error: Information Channel CC_XXXXXXXXXXXXXXXXXX: Converted complete file content to XML format.
Warning Channel CC_XXXXXXXXXXXX: Empty document found - proceed without sending message.
Thnaks,
SatyaHi,
Check this link.. Do you create input file similar to the link describe?
Empty document found. Proceed without sending message -
No documents found for the selection in J1INEMIS-new TDS report for India
Dear all,
In J1INEMIS the error is coming:
No documents found for the selection
Message no. 8I760
what can be the reason.
regardsTo get TDS certificate we use T code J1INMIS, Pls dont go to This T code: Follow this:
1. J1INCHLN
2. J1INBANK---Bank no, will be Check Issue A/C.
3. J1INCERT----In this document date should be end of the month date exampl=31/03/2011
After giving all the details in J1INCERT
select - Ctrl S (Save the document_
you will see the below screen (Variant) give variant name XXX Description (Check Printing)
save, you will get 16A Form. -
Lockbox File Help- documents found but status went unprocessed
Good Morning SAP Guru's,
I need some help here. I have a payment in a file that contains 1,662 4 records for one check. 80% of the reference information was found and on the report it states document found but the payment still went "unprocessed' in the lockbox program FLB1. The payment clears receivables in multiple customer accounts. When the file was uploaded, we deliberately did not select "enhanced invoice number' for this reason.
Why didn't it hit at least in one customer?
Any help/insight would be greatly appreciated!
POINTS PROMISEDFolks-
The error message on the Posting Log from the Lockbox program was as follows:
Accounts receivable posting error: (F5 102) Customer * is not defined in company code NNNN
As I mentioned in my earlier post, many of the documents hit, why didn't it post "On account" or "Partially applied"? -
Salary Adjustment: No valid appraisal document found
Hi ,
For our ECM , We use 2 dimensional guideline(MBOA nd CRAT)
We are facing an issue of *Salary Adjustment: No valid appraisal document found * when we try to do compensation planning for employees..
Though the appraisal status is in completed status with ratings.
is it an authorisation problem?
Are we missing a link....
any inputs?
Tks Rgds
GHey Hayerk,
Please check the dates on which the system picks the appraisal rating.
For us , the validity dates were a mismatch. Pease ask your abaper to keep a break point in the badi HRECM00_MATRIX_SEGM-HRECM00_MATR_MBOAPPR
Check in view table V_T71ADM10, the eligibility key date.(ideally somewhere in june of the year if you are going to check for ratings for in the year)
And service seniority can be 6 months as per SENI in V_T71ADM13,
And also check your configuration in V_T71ADM14.
Have u maintained the correct template and the element IDs in the levels.
Hope this helps.
Let me know if you need more details
rgds
Gayathri -
No valid appraisal document found 00000429
We have Appraisal & ECM configured. Appraisal documents are also created.
In MSS when I try to do compensation planning, I get the following error - 'No valid appraisal document found 00000429'.
Can anyone help in this regard?
Is it because the various dates in ECM i.e. Key date, Effective date etc are not in sync with the Appraisal period or anything?I am trying to do an Annual review. The status of appraisal for the selected employee was completed. I approved it and therefore the status changed to Approved. Now the earlier error i.e. - No valid appraisal document found is gone.
Instead I am getting the following errors now:
(1) Salary Adjustment (Merit) (T): Jordan Micheal does not have a salary structure acc. to basic pay record on 01/01/2010 (00000972)
(2) Salary Adjustment (Merit) (T): Error calculating compa-ratio of Jordan Micheal on 01/01/2010 (00000972)
Note:
In ECM config, we are using MBO appraisal and compa-ratio matrix.
Edited by: VS on Nov 23, 2010 12:15 PM
Edited by: VS on Nov 23, 2010 12:21 PM -
No sutable purchase document found but see in EKKO and Me23n
Hi expert,
Not getting Printout via ME9F.
No sutable purchase document found.
but i can se documnet no in EKKO and Me23n.
Regards,Hi Vivek,
ME9F can only be used to display Purchase Orders where print relevant changes have been made after output.
See information in Note 450617:
If no print-relevant changes to the purchasing document exist, then it
only possible to display the change message again via the spool request
that was created or the optical archive (if available). For more
information, also consult Note 391637.
In addition, in the above-mentioned transactions bear in mind that you
can recognize a change message by the corresponding indicator on the
message list.
Regards,
Purnima. -
ECM - No appraisal document found
Hi,
We are implementing ECM in ECC 6.0. Appraisal & ECM is been configured. Appraisal documents are also created. In compensation process it is saying 'No appraisall document found' - Inspite of existence of appraisal document.
Can anyone help in this regard.
Thanks
SirishaHi Arun
Thanq for ur response
I have checked the tcode PPPM, its fine & showing the appraisal document as completed, inspite of this, it is saying 'appraisal document not available'.
Sirisha -
Have a user who gets message "document not found ", document is found by other signatories ??
Sorry, I was not very clear. I send the document to an e mail address, it is received, however when the recipient clicks on the document to enable his signature , he gets a message that indicates the document cannot be found. I am assuming it may be something on his local machine preventing the " find " since other signers are getting the document and signing, any prerequisites for esign ?
Thanks, Bill
Bill Castetter
Director Information Technology
Town of Plainfield
206 West Main Street
Plainfield, IN 46168
[email protected]
317-839-2561 x 247
317-850 5445
Maybe you are looking for
-
Third Party Deliveries and VAT/taxes
Hello All, customers using third party delivery between two EU companies in different countries are mostly facing the same problem: the tax code is not correctly found in the sales orders and has to be maintained manually. Some of the customers are d
-
Hi, I don't understand how to make to improve the security of dot1q tunneling. If the client makes some errors by example by disabling the spanning-tree on a vlan and he creates a loop between differents sites (L2VPN). What are the safety standards f
-
More than one font in a single paragraph style
I type academic papers mainly in English but with Japanese annotations (Japanese words in parentheses). With MSWord (hate to compare), I can set both the English and Japanese font styles for a single paragraph style. Can I do this with Pages? At pres
-
Hi All. I seen couples thread in this forum talking about WDA and WF. Especially related with SWFVISU transaction where WF can sent work item id to WDA. Is there any way for us to send some data back to caller (workflow task) thru one of WDA paramete
-
Redeveloping a client's existing BC website
I have see the thread about partners redeveloping sites but for a client - I have a couple who want rebuilds. If I use a brand new portal to do this in (which would be much easier to work with), will Business Catalyst then move over the balance of th