FCLK is not active with ZC706

Hello,
I am using zc607 (zynq-7000 SOC) I'm trying to add a simple axi slave which holds 4 registers.
alas, when trying to access the registers (either through linux or xsdb) I receive "Exception: Cannot read target memory. PL AXI slave ports access is not allowed".
trying to debug the axi lines I've come to notice FCLK was 0.
My M.O was as following:
Opening vivado project, adding my AXI slave IP, adding processing system 7, verifying memory addresses and uploading to my board. which is running petalinux through sdcard.
any help be greatly appreciated.

you need to go to ps7 properties and enable PS FCLK0 with the clock speed you need in the clock configuration page.

Similar Messages

If imessage is not activated with my phone number, does text messages can be forwarded to my ipad?

my imessage is not activating with my mobile number, i do not receive code for text forwarding in my ipad/ air 2, my iphone 4s and ipad is operating with the same iOS. plz help i am being able to use call and messages forwarding facilities.

Hi, uttam_june15.
Thank you for visiting Apple Support Communities.
I am not sure if you are unable to activate iMessage or that your phone number is not registering with iMessage. However, here are the troubleshooting articles that cover both scenarios.
If you get an error when trying to activate iMessage or FaceTime
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
-Jason H.

Design panel not active with php file?

I have DW CS5 on two computers. One one the design panel is active with a PHP file. On the other, it is not active.
I must have a setting wrong on the one computer. What do I need to do to make the design panel active? The code panel is fine on both.
It is very hard to work on a PHP file when I can't see the design panel.
Regards,
Bill Schaepe

The problem is that I have a number of PHP files that I need to modify the words in a form and it is hard to see what I am doing.
You can't do this in Code view?
On both computers, I just generate a new PHP file. On the one computer the design panel is active and I can click design tab on it to see the design. On the other one, I can't click on the design panel tab to see the design.
Both the same version revision level of DW? Both on the same platform? Do you have an option to click on "Design" under View on the main menu?

InDesign 5.0 tools/panels not activated with mouseover/mouseclick

The following summarizes the hardware, software, procedures and results in my attempt to resolve issues with InDesign 5.0. Suggestions would be appreciated. Thanks!
System:
HP EliteBook 8540W
Intel Core i7 CPU Q820 @ 1.73GHz 1.73 GHz
8 GB
64-bit Operating System
Pen Input Available
Wacom Intuos4 pen and mouse
Adobe Products:
Adobe Creative Suite 5 Master Collection, Version 5.0
Acrobat 9.4.6
Procedure:
The computer system control panel > program uninstall was used to clear all Adobe products except Acrobat, AIR, Flash Player and Media Player. The Adobe CS5 Cleaner Tool for Windows was installed and run at Clean All to remove all products and installer-related files for the Creative Suite 5.0.
The Creative Suite 5.0 was re-installed on the HP cpu using the registered program discs.
The Adobe 7_0_4 InDesign Patch-All was downloaded from Adobe and installed.
Result:
Tools Panel: Selection Tool and Direct Selection Tool will not highlight with mouseover nor activate with mouseclick.
Layers Panel: Can't click-on Layer Name to activate that Layer; individual Layer Names can't be double-clicked to rename; visability can't be toggled with mouseclick; the Create New Layer icon at bottom of panel can't be activated with a mouseclick; a New Layer can be created from the Panel upper dropdown menu; Panels location can be moved, panels opened/closed, and collapsed with mouseclick.
Character Panel: None of the Character styling dropdowns within the panel can be activated; Character styling options can be activated from the upper right panel options triangle dropdown, and they can be activated from the Application Bar: Type > Font and Type > Size. In the Type > Font flyout panel displaying all fonts, the mouse wheel will not scroll through the fonts.
Paragraph Panel: Can't click on paragraph alignment option icons.
Links Panel: In Pre-flight, can't activate link list item with mouseclick.
Stroke/Color/Swatch Panels: Can't activate any tools within these panels with mouse.

Peter,
Thank you very much. I re-set DPI to default, rebooted, and the issues I was experiencing with InDesign were gone.
Brad

TS4268 Why FaceTime and iMessage not activated with non US located Apple ID?

I have an iPad mini and I'm not able to activate FaceTime and iMessage using my apple ID whcih has a country set as Egypt, and when I tried to use another ID with US as country, it working fine.
Note: I was able to activate iMessage using the Egpytian ID before updating to IOS 6.
I guess this is a problem with IOS 6 and as a work arround you can chnage the country of you ID to US (if you don't have payment details set) and it will be activated.

gingirl wrote:
By the way who made you an expert.......http://www.apple.com/ca/iphone/built-in-apps/ I know mine had it, it was the only way to connect to my ipod....
I am an expert compare to you. I don't get over 9,000 point just being foolish.
Proof: http://support.apple.com/kb/ht4319
At the end of this Apple article, it's written in black on white.
Note: There is no FaceTime app on iPhone. Use the Phone app instead.

IPhone 4 activated with Sprint... but not activating with Apple?

I activated an iPhone at the Sprint store yesterday, and it activated fine with the carrier, but not with Apple. I was told that it is a problem with the servers due to iOS 7 coming out, so how long should I expect to be waiting for this problem to be solved?

Right now I'm in Dominican Republic, but I'll be in NY by 15th so I must get thru this 1 week, btw, right now it says it's charging it's at 14% I dont't believe its a faulty charger as I use it (the adaptor) to charge my mom's iPad, Blackberry 9360, iPod Nano 6th Gen & iPhone 2G, and all the other devices charges correctly, I'm more into the theory of the faulty battery

Signal Express not activated with Labview Full Development System Volume License

I'm using a volume license manager to generate license for disconnected machines. I just upgraded to Labview 2009. The license files work for labview but are not working for signal express. I have the Labview full development system which included signal express in the past. Both labview and signal express work fine on my computer that also has the volume licensing manager software installed. This computer is connected to the license server. I need to get signal express activated on my disconnected machines.

LabVIEW Full Development licenses still include Signal Express. Are you saying that whenever you are connected to the server you can run Signal Express just fine, but whenever you create a disconnected license Signal Express is not able to launch? Can you verify that you are, in fact, checking a license out from the server whenever you are connected to the network?
If you still have trouble I would recommend calling NI support so we could get more informatioin (such as your license file, contract ID, etc).

Tab View in Safari 6 on Mountain Lion is not activating with the Pinch Gesture.

The pinch gesture that activates Tab View in Safari 6 is not working. I have the latest MacBook Pro 17" with an updated Mountain Lion OS.
Everything else in Safari works fine, even the keyboard shortcut for Tab View works. Whether I pinch on my laptop trackpad or the standalone trackpad the pinch gesture doesn't activate the new Tab View feature.
Anyone else have this issue?

Sorry but what is the keyboard shortcut to activate tab view? KineticBranding, you said, "Everything else in Safari works fine, even the keyboard shortcut for Tab View works. " I've been looking everywhere for a keyboard alternative to the pinch out gesture that activates tab view. I am aware of cmd+shft+arrow to got left or right a tab, but is there a shortcut to activate tab view?
Thank you.

HT1430 i have updated my iphone 3g but now its not activating with the sim card i placed in. plz help

i have updated my iphone 3g and now the phone is not activating

Insert a valid, working SIM from the carrier it is locked to.

ScrollPane not activating with JTreeTable

I am using a JTreeTable that has been customized to display XML (http://www.javalobby.org/java/forums/m91839339.html)
its working fine except for the scrollpane.. when the contents exceed the size of the treetable, the scrollbar button is not appearing...
in the jnlp (source not available), the scrollbar seems to be working..so i guess i must be doing something wrong..
     spResp=new JScrollPane2();
     spResp.getViewport().add(jTreeTableMain_Resp);
     //spResp.setActionMap(jTreeTableMain_Resp.getTree().getActionMap());
     spResp.setVerticalScrollBarPolicy(JScrollPane.VERTICAL_SCROLLBAR_ALWAYS);
     jTreeTableMain_Resp.expandJTree(-1);
     jPanelResponse.add(spResp);
     jPanelResponse.revalidate();
     jPanelResponse.repaint();pls help!
PS JScrollPane2 is a subclass of ScrollPane that overrides setColumnHeaderView so that table headers are not required

prob solved...
i was setting the preferred size.. must have copied the generated code for some other component..
once i commented the setPreferredSize the scollpane started working fine...

Imessage not activating with phone number, imessage not activating with phone number

I have seen other answers like putting it off and on. Toggling the imessage and FT buttons on and off. Have reset it. Tried all sorts and not happening. It disappeared when i changed the password of my Apple id.

You might have better luck posting on the iPhone community.
https://discussions.apple.com/community/iphone/using_iphone

My iphone is not activating with a sim also

it is saying you cannot activate your account without entering your sim but i have entered it

Obtain a micro-sim from your cellular provider.

Objects not activated during Upgrade

Hi,
We are uphrading our BW system from 3.5 to 7.0. During XPRA phase i.e installation of technical content, many query elements not activated with error message 'Java communication error'. They are not present in our current production system and may be delivered with new BI content. Can we ignore these objects at this stage. What actually happens in XPRA phase? Do our basis installing all business content objects?? We are not using java functionality now on our system.
Regards,
Raj.

hello,
it may be that the services in the J2EE is not up. try to activate all services in the J2EE system.
Ask your basis to do the same.
There are some notes on the same:
SAP Note 1036075 TREX 7.10: Java parameter communication.readtimeout
SAP Note 946679 RFC_VMC_COMMUNICATION_ERROR
SAP Note 982547 COMMUNICATION_FAILURE error group instead of SYSTEM_FAILURE
SAP Note 916090
refer some of links:
Install BI_CONT 703 met the problem in phase XPRA_EXECUTION
/message/4877111#4877111 [original link is broken]
Regards,
Dhanya

Record is not displayed in Historical Reports-Activity with no Customer

Hi All,
We have an issue in Historical Reports for Activity.we are using Book of Business also.
Now the issue is under Activity History as subject area, when an activity doesn't have any Customer it should come as Unspecified in the report.
Like if it doesn't have account assosiated to it then it is shown as Unspecified in the report.
But for activity with no customer assosiated to it, it is not showing the entire record (Acitivity) in the report.
When the Customer field is removed from the displayed columns then we are able to see those activities in the report.
Note:
But when the Book of Business is not there previously, it was working fine
An response is appreciated.
Thanks & Regards,
Lemu
Edited by: Lemu on Dec 28, 2010 10:33 PM
Edited by: Lemu on Dec 28, 2010 10:34 PM

Hi,
Yes we have a workaround for this.
Since the Primary Customer is not exposed as an Activity filed.
Copy the value of the Primary Customer and display it in a filed of activity using workflows.
Then replace the customer filed with this filed.
Then u will get the activity without customer also cause the customer filed is a normal activity field.
Hope this helps.
Regards
Lemu

My iphone 3gs is not activating after updating my software with i tunes...what shall i do? cant i go back to my normal version which was ios 4.1

my iphone 3gs which is not associated with this accunt is not activating after updating the sof tware, it connects to i tunes but i tunes says "we arh your unable to continue with your activation at this time, please try again later or contact customer care". my iphone aslo just says it cannot be activated or something like that every time i try. i have been waiting for 4 hours now but it still hasnt worked. how can i uninstal this update and go back to my old version which ws ios 4.1 or or ios 4,3. i dont even know what version it updated to, im assuming it is ios5 but not sure. it says try connecting to i tunes as well but it is connected and i tunes cant activate it either. my phone is connect to a wifi but it stll says no service.
i will really appreciate some help.
thanks.

Generally this is a sign that the iPhone had previously been
hacked/modified/jailbroken and the update relocked it to the
original wireless carrier. If this is the case, only that wireless
carrier can unlock your iPhone. You must contact them to see
if they offer unlocking and if you qualify.
Where did you acquire this iPhone?
What wireless carrier did you use before this problem?
Does the app Cydia appear on your iPhone?
What does it say when you look at Settings=>General=>About=>Carrier?

FCLK is not active with ZC706

Similar Messages

Maybe you are looking for