FCP 10.1.3 multiple graphic images into one frame

Hi - How do I put multiple graphic images into one frame? - so it kind of looks like a video wall - except these are still images. I can do it manually but it's not precise. Anyone found a way other than this? Thanks.

Here is my quick and dirty generator called "9 Pictures": https://www.dropbox.com/s/92c536wgesh2yzj/9%20Pictures.zip?dl=0
To install it, unzip the file and place the folder inside /Users/yourname/Movies/Motion Templates/Generators
It will look like this in FCP X. You just have to click each drop zone icon in the inspector and then select the desired clip from the browser. Use the Pan and Scale controls in the inspector to select which part of each image you want to use. Note: this was done in the hope that it may be helpful, but it is no more than a quick thing. You can also control-click the generator in the generator browser and choose open in motion (if you have it) to see how it was done and to modify it.

Similar Messages

Combine multiple still images into one clip PE 10

Is it possible to combine mulitple still images into a single clip? For example, I have 50 still images in a video track, each of which is a clip, and I want to combine them into single clip out of them so I can adjust the opacity without having to adjust each of the 50 clips individually. Any information is welcome. Thanks.

Mark,
I had done this but I was hoping there was an easier way to do it within PE, without having to export as a video file and then importing that video file.
One has to think about what PrE is doing with the Timeline, to understand why the Export/Share is necessary to get Stills/Clips to become one file. PrE is a non-destructive editor, in that it does not actually work with the Source Footage/Files, but only extracts data from them. What we see on the Timeline is really a proxy file, representing the edits that we are making. It is stored as XML language, with first links to the Source Files, and then a set of instructions on what we have done with that data. Since the Timeline is but a representation, of what we have done, there is no AV file - yet. That does not come about, until we Export/Share. At that point, PrE looks at the Project file (PREL), and notes exactly what data is required from the Source Files. The program then reads that information, and say gathers the data of Clip # 1 from 00;00;00;00 until 00;05;00;00, for use in the output file. It then moves to say Clip 2, and extracts the data needed there. Finally, the program processes that data, say adding Effects, and then Exports/Shares to a new file - creating that from the data, and the instructions. Still, the originals are not changed in any way - they are untouched, and only read from.
For instance, say we have a 20 min. Source Clip, and cut it into 30 tiny segments, "deleting" material between those. We have not really Cut that Source Clip, and we have not really deleted anything - only in our proxy file, and with the instructions in the PREL. It is the same with Still Images. We see them as separate Clips, with the Duration that we have set, and perhaps any animation that we have added via Keyframing the Fixed Effects>Motion>Scale (Zoom), and Motion>Position (Pan), but other than seeing those changes in the proxy file, used only for display of the Timeline and playback, nothing has been done yet. Then, upon Export/Share, when the output file is created, those changes are enacted on it.
Good luck,
Hunt

How do I add multiple images into one file?

I'm sure this is something that's been covered in another post (or even in the help portal) but I think my wording in my search terms are not correct or... I don't know, because I just can't find what I'm looking for.
I want to know how to add multiple images into one file/one image, both horizontally and/or vertically. To give you an idea of what I mean, check out :
http://www.best10apps.com/apps/comic-story,531596060.html
If you scroll down, you'll see a heading entitled : Screenshots of Comic Story. Notice how there's 3 pictures (divided by borders). 2 of those pictures are side by side, and 1 of them is below the first 2 pictures.
I want to know how to add different pictures/images and put them into one picture.

One way is to create template PSD files and populate them with your images using Photoshops scripts.
Photo Collage Toolkit UPDATED June 12, added Picture Package Support via PasteImageRoll and BatchPicturePackage scripts.
The package includes four simple rules to follow when making Photo Collage Template PSD files so they will be compatible with my Photoshop scripts.
There are eleven scripts in this package they provide the following functions:
TestCollageTemplate.jsx - Used to test a Photo Collage Template while you are making it with Photoshop.
CollageTemplateBuilder.jsx - Can build Templates compatible with this toolkit's scripts.
LayerToAlphaChan.jsx - Used to convert a Prototype Image Layer stack into a template document.
InteractivePopulateCollage.jsx - Used to interactively populate Any Photo Collage template. Offers most user control inserting pictures and text.
ReplaceCollageImage.jsx - use to replace a populated collage image Smart Object layer with an other image correctly resized and positioned.
ChangeTextSize.jsx - This script can be used to change Image stamps text size when the size used by the populating did not work well.
PopulateCollageTemplate.jsx - Used to Automatically populate a Photo Collage template and leave the populated copy open in Photoshop.
BatchOneImageCollage.jsx - Used to Automatically Batch Populate Collage templates that only have one image inserted. The Collage or Image may be stamped with text.
BatchMultiImageCollage.jsx - Used to Automatically Batch Populate Any Photo Collage template with images in a source image folder. Easier to use than the interactive script. Saved collages can be tweaked.
BatchPicturePackage.jsx - Used to Automatically Batch Populate Any Photo Collage template with an image in a source image folder
PasteImageRoll.jsx - Paste Images into a document to be print on roll paper.
Documentation and Examples

I have a paid subscription, but am no longer able to merger multiple pdf documents into one pdf. What's up?

I have a paid subscription, but am no longer able to merger multiple pdf documents into one pdf. What's up?

Pat:
Below is a copy of an 8/7/2013 email from adobe. I prepaid a one-year subscription, and, until I recently upgraded to Windows 8, I was able to make several dozens of merged pdf documents. I seem to be no longer able to use the merge feature that I had successfully and repeated used. When I search for the merge feature I end up with a request that I pay for an upgrade monthly subscription to use the merge feature.
Tom
=================================here follows my subscription email====================================================
Welcome to Adobe ExportPDF
2 messages
[email protected] <[email protected]>
Wed, Aug 7, 2013 at 1:01 PM
Reply-To: [email protected]
To: [email protected]
Dear Thomas Corr,
Thank you for purchasing a subscription for Adobe ExportPDF.
Sign-in to export a PDF Now >>
With your subscription you can:
Enjoy unlimited online conversions from PDF to Word (DOCX).
Make scanned text editable.
Maintain page, paragraph, and font attributes.
Preserve tables, images, and multi-column text.
Export PDF comments to Word.
Help and feedback
Get help from Adobe on the Support Center.
The Adobe ExportPDF Team

Question - how to layer images into one

I've been looking for the "how to steps" to layer images into one. All the sites talk about "photoshop" but none actually brake down as which version etc...if you know the steps please post it up so I can stop looking. Thank you!!

I'm creating a new website and wanted to have 5 pictures layered onto one another on our company logo. Like on this web page at the top. I'm using Adobe Photoshop CS4 Extended
http://allwebcodesign.com/templates/T27dChromeNavy/Graphic-LOGO-sample.htm

Multiple users logged into one server, each users printer has a different name, application needs ONE name to print to.

Multiple users logged into one server, each users printer has a different name, application needs ONE name to print to.
I'm NOT in any way a Terminal Services expert and I need help trying to get an application program working in a multi-user environment.
The issue is that the printer changes for every user that is logged in. The application needs to print NOT to the default printer, but to a "special" printer which is selected in the application... let's call it a label printer to simplify the explanation.
You have your default regular printer, easy for the application to find that one, and then you have a special printer that labels get printed onto. The application needs to know what printer is the label printer. So we allow the user to select that in the
application and the selection is stored in a config file in
C:\ProgramData\mfgr\prog\setting files
I don't have access to the application so I can't change how this works.
In the "regular" world, selecting the label printer driver to use should be per machine, NOT per user. When a new user logs into a machine, the physical printer doesn't go "poof" and a new printer suddenly appear. Same printer for all
users.
Yet in terminal services, the physical machine is "merged" with the virtual machine on the server. And there can be many users logged in at the same time. So each users real machine (and real printer) is injected into the "fake" terminal
services machine. The name of the printers is made unique for each user. So the printers DO go "poof" and change names depending on the user logged into terminal services.
So user "A" logs in and sets up the application to print to "LabelPrinterForUserA" (or whatever the name of the printer happens to be), that setting is stored in the ProgramData subfolder, and all is well. Later, user "B" logs
in, and when they print, the application tries to print to "LabelPrinterForUserA" which doesn't exist for user B or is only accessible by user A. If user B re-configures, that breaks it for user A.
SOLUTION 1: The way that /should/ work (in my mind) is that you define one "generic" printer in Terminal Services... call it "Virtual Label printer" and when the user wants to print to it, the print job gets re-directed back to whatever
physical printer is actually connected to their local workstation. There is a map of virtual printer to actual printer depending on the current user. The application is told once to print to "Virtual Label Printer" for all users.
SOLUTION 2: Or... there should be some way to make the ProgramData sub folders separate per user. E.g. when user "A" tries to access:
C:\ProgramData\mfgr\prog\setting files
they actually get
C:\UserData\UserA\AppData\mfgr\prog\setting files
and user "B" gets
C:\UserData\UserB\AppData\mfgr\prog\setting files
So the question I have is: Does either of those solutions exist hidden somewhere in the setup of terminal server? Or is there another way around this issue that I don't know?

I don't really have a "for sure" answer to this, but because people here can't seem to deal with a question that hasn't been answered I'll provide the best answer I did receive from ServerFault.com user Nathan:
I can feel your pain with using old software on terminal servers ...the solution I've come up with definitely won't scale as it requires some manual configuration, but I've gotten this method to work with our label printers (which require to be
printed to an LPT port...yep, that old).
Share your USB-connected printers to the network on each machine. Then, have the user log in on aunique session for each of them
(a TS account cannot be shared among computers for this to work) and install a network printer pointing to the USB one they shared. Try to use a DNS name to account for possible DHCP movements.
After, it should work. Each user can do this since display names can be identical as long as the ports are different (which they are).
This was clarified by the following series of comments:
I think you are on to something here, and I originally advised the admin to do this. The problem he ran into is that it setup the printer names in the TS as "printer on usersworkstation"
and he could not rename it except to change the "printer" to whatever. E.g. the "on userworkstation" remained. I believe there is another way of installing the printer which avoids this, but I can't find it. Ages ago, one used to do NET
USE LPT2 \\computer\printer password /USER:domain\user /PERSISTENT:YES and then tell the driver to print to LPT2 –  James
Newton Mar
17 at 16:21
@JamesNewton That's actually the exact method we used. The way around the "network printer" part is to install it as local printer and map it to a TCP/IP port that way. –  Nathan
C Mar
17 at 16:28
You mean in the case where the printers are TCP/IP connected and not local USB / LPT to the users workstation? That makes sense. Wonder if this will work for USB connected printers... –  James
NewtonMar
17 at 16:35
@JamesNewton You'd share the local printer on the client's PC then on the server connect via TCP/IP to it. You'd need static addresses or use DNS names if DHCP, though. –  Nathan
C Mar
17 at 16:51
Ah. Yes. I see. Looks like the LPT thing should work even with a USB connected printer:superuser.com/questions/182655/… –  James
Newton Mar
17 at 17:09

Hello Apple community... I am trying to combine multiple pdf's into one, using preview, but when I drag the additional pages they show up as separate documents.

I am trying to combine multiple pdf's into one, using preview, but when I drag the additional pages they show up as separate documents. When I drag the doc in a line would show up in the past, and if I went above th eline all was good. It doesn't have a line, and no matter what I try I am having no success.
Please help!

According to an Apple Support article, unless there are unforeseen issues
in file ownership or permissions, the combining of .PDFs should be simple.
•OS X: Combining PDF documents using Preview - Apple Support
There are a few variable and similar methods, some change with version
of OS X in use; some vintage OS X may vary a little in the process...
A variety of similar topics appear in search results, with terms:
" mac os x combine pdf into one " such as this page shows...
https://www.google.com/?gws_rd=ssl#q=mac%20os%20x%20combine%20pdf%20into%20one
If the system is older than Mavericks there may be other methods to try.
Suggestions are among linked results in the search. I see a few fair ones.
•Here's another that offers generally similar suggestions...* this info looks OK, extra links, do not:
http://osxdaily.com/2014/06/27/how-to-join-multiple-pdf-files-into-a-single-pdf- document-in-mac-os-x/
{ note: avoid clicking on links to products in * this ^ page, since they likely will not help & may be adware prone }
If you have a problem after trying other methods, based on an OS X
your computer is running, post back with more exact information...
Good luck & happy computing!
edited

How do I bind multiple PDF Documents into one single document?

I am trying to bind multiple PDF documents into one single document can anyone please help me?

You would need Adobe Acrobat to do that. Reader doesn't have the ability.

How do you merge multiple pdf's into one document?

How do you merge multiple pdf's into one document?

Hi pharmovative,
You can use the Combine PDF feature of Adobe PDF pack to combine multiple PDF files into one document. (Or, if you have the full version of Acrobat, you an do it there as well by choosing Create > Combine Files into a Single PDF.)
Please let us know if you need further assistance.
Best,
Sara

HT1918 Is there a way to consolidate multiple Apple IDs into one if they are all issued to the same persons(s)?

Is there a way to consolidate multiple Apple IDs into one if they are all issued to the same persons(s)?

No. Unfortunately, you can't combine Apple IDs togetehr, even if you own them all.

How Do I Combine Several Images Into One Image Which Contains Links To A Series Of Web Sites?

How do I combine several images into one such that the combined image contains a series of web links? In particular, I’d like to create such an image and put it into my Outlook email signature. At present, as per the image below, I have at least six separate images in my email signature with each image containing a web link. Is Photoshop the best tool for this job? Or would it be easier to do this in some other package? I have three packages at my disposal: Photoshop, Ilustrator and Dreamweaver. Can someone please explain in detail how I would do this? Or perhaps someone could direct me to a link that explains how to do this. Thank you.

Thank you for that correction, Hobotor. I admit I hadn't thought about an image map, in the context of someone who doesn't seem to know HTML very well... My thinking was running along the use of the Photoshop Slice Tool to get most of the way there...
To expand on the above, if you were to slice up your image using the Slice Tool, say like this:
Save for Web & Devices will create the HTML and save all the sub-images.
Then you edit the HTML and add a (hypertext link) elements surrounding the various images. Only thing is you'll have to set the border-style of the images to none.
For example:

<table id="Table_01" width="554" border="0" cellpadding="0" cellspacing="0">
<tr>
<td colspan="10">
   <img id="Sig_01" style="border-style:none" src="images/Sig_01.jpg" width="554" height="56" alt="" /></td>
</tr>
<tr>
<td colspan="10">
   <a href="http://www.GrahamsWebSite.com"><img id="Sig_02" style="border-style:none" src="images/Sig_02.jpg"
        width="554" height="43" alt="" /></a></td>
</tr>
etc.
A full copy of the HTML and images can be found here... View Source to see it as an example:
http://Noel.ProDigitalSoftware.com/temp/Graham/Sig.html
-Noel

Best approach to join multiple statistics tables into one

I have read different approaches to join multiple statistics tables into one, they all have a column "productobjectid".
I want to get all data for each product and put it to excel and output a jpg statistic with cfchart.
How would you do this, the sql part?
Thanks.

A couple suggestions:
1) when joining tables, its best to list both table/fields that you are joining in the FROM clause:
FROM shopproductbehaviour_views INNER JOIN shopproductbehaviour_sails ON shopproductbehaviour_views.productobjectid = shopproductbehaviour_sails.productobjectid
2) You add tables to a SQL join by placing another join statement after the SQL above:
SELECT *
FROM TableA INNER JOIN TableB on TableA.myField = TableB.myField
INNER JOIN TableC on TableA.anotherField = TableC.anotherField
3) If you have columns in the tables that are named the same, you can use column aliases to change the way they appear in your record set:
SELECT TableA.datetimecreated 'tablea_create_date', TableB.datetimecreated 'tableb_create_date'
4) Certainly not a requirement, but you might want to look into using <cfqueryparam> in your where clause:
WHERE shopproductbehaviour_sails.productobjectid = <cfqueryparam cfsqltype="CF_SQL_VARCHAR" value="#all.productobjectid#">
You might want to consider checking out one of the many tutorials on SQL available online. Many of the questions you posed in your post are covered in pretty much every basic SQL tutorial. Alternately, a good SQL book is worth its weight in gold for a beginning web applications developer.

Is it possible to paste two images into one layer?

I'm having some issues pasting two images into one layer. Every time I paste the second image, it automatically creates a new layer...is there anyway to prevent that from happening? I'm making an animation on photoshop and I want there to be more than image in some of the frames. Please let me know if you have any suggestions! Thanks!

You can merge the two layers together once they're position. Select the top layer and choose merge down or select both and choose merge layers (from the layers menu).
http://help.adobe.com/en_US/Photoshop/11.0/WSfd1234e1c4b69f30ea53e41001031ab64-78b2a.html

I want to combine 9 images into one so I can get them printed on a card any help or do I need an inexpensive app?

I would like to combine 9 images into one so that I can print them on a card. Can I do this in i-photo or do I need an inexpensive app?

No, iPhoto can't do it. If you have Pages it can be done there very easily. Drag all of the photos into a Pages page, resize and arrange as necessary.
Otherwise you'll need a 3rd party image editor that supports layers.
Some Image Editors That Support layers:
Photoshop Elements 11 for Mac - $79
GraphicConverter - $40
Rainbow Painter - $30
Imagerie - $38
Acorn - $50
Pixelmator - $60
Seashore - Free
GIMP for Mac - Free
Xee 2.1 - free

Paste image into new frame with same offset

InDesign CS4-- I'm trying to copy an image from one frame and Paste Into another frame on the same page, and have it appear in the same position within the frame. I want it to adhere to the offset coordinates of the previous frame, but instead, it uses the offset coordinates of the page, or centers the image within the new frame. As I recall, CS2 or CS3 had a feature that allowed me to do this, but I cannot figure it out in CS4. Please help! Thanks.

Thanks, Rob. Unfortunately, I got a new error with the latest script you posted (sorry--not trying to be a pest!!). It says,
Apple Script Error!
Error Number: -2753
Error String: The variable myRend is not defined.
(One thing that's different is I'm working on a different machine than I was the first day I posted about this, but I'm using the exact same version of InDesign. Would this make a difference? I forgot to copy the original script file from the other computer before coming to work today... If I need to do that, I can.)
Thanks for your continued help!

FCP 10.1.3 multiple graphic images into one frame

Similar Messages

Maybe you are looking for