Fcp 5.03 halts when capturing

when capturing g5 halted and random happens, and another problem i set still frane time to 1 but after i imported the still frame sequence and i find the length of still frame's length is not 1 and in fcp 4.5 it works fine and i was troubled i would be if you anyone helped me great thanks to you and tell me why

Welcome to the forums, blankmac. When you say you have random halts when capturing, do you mean that the capture stops but you still have the media, or do you mean that the program halts/quits, or do you mean your entire computer stops (kernal panic)?
What is the length of the imported still?
Patrick

Similar Messages

When capturing mini dv footage into fcp, the media comes in sped up.

when capturing mini dv footage into fcp, the media comes in sped up.
fcp 4.5
g5 running OS 10.4.10
has never happened before.
[email protected]

DVCam decks should automatically lock onto the control track and playback OK, it's normally not the case the other way around with regular DV decks that don't pick up on the fact it's DVCam material and play back slowly and with picture and sound breakup.

Monitoring audio in sync with video when capturing in FCP studio

Is there a way I can monitor audio in sync with video when capturing in FCP Studio? I know you can plug headphones into your tape deck but that sound is not in sync with the video in the capture window due to time delay. I tried plugging the headphones into my Powerbook but could not get any audio coming through these, nor audio through the Mac's inbuilt speakers.

The preview checkbox is ticked and the audio monitor indicates that sound is being picked up (the levels rise and fall) but I still can't hear anything! The audio/video sync on the external monitor is ok, but because there is a time delay between that and the video capture window, I can't use that as a reliable monitor for sound sync. If I could resolve the video sync problem there, then I could monitor the sound through the external monitor.

[FCP S2] How to make each scene a clip when capturing video?

Hi,
I'm totally new to Final Cut Pro and have recently purchased my Mac Pro and FCP Studio 2. I come from background of Pinnacle Studio on PC and so this seems like a huge leap.
Any way, With Pinnacle Studio, when capturing video it automatically made each scene (point between Start rec and Stop rec on Video Camera) into a clip. I could then drag&drop the clips I wanted into my project timeline. I can tnen eaily add transitions inbetween these clips in my time line.
Now with FCP S2, it seems to capture the video as one long clip and apparently, as I've been told, the only way to separate each scene is to manually cut at the point of a scene cut. Now I can't believe that $1200 software would make you do that and $99 software does this automatically. So I have come here in the hope to find an expert who can explain to me, in very simple terms and steps, how I can achieve this in FCP S2.
Any help will be much appreciated.

Here is a bit of the FCP manual that relates to capturing a single tape and capturing individual clips for each break in TC:
How to Avoid Capturing Clips with Timecode Breaks
The “On timecode break” pop-up menu in the General tab of the User Preferences
window gives you several ways to avoid capturing clips with timecode breaks. It’s
important to set this option to suit the way you intend to capture your clips. You have
several options:
Â Make New Clip: This is the default option. Video that’s already been captured before
the break in timecode is saved as a single media file, with its Out point set to the
frame occurring immediately before the timecode break. Final Cut Pro then
automatically continues capturing video after the dropped timecode frame as a
second media file. When this option is selected, clips captured after timecode breaks
are named with the original name and the number of the clip. For example, if the
first captured clip’s name is “Cats Playing,” the second clip’s name is set to “Cats
Playing-1.”
This is a good option to choose if you are capturing an entire tape. For example,
suppose you are capturing the entire contents of a 60-minute tape that has four
timecode breaks. Instead of restarting the capture every time a timecode break is
detected, Final Cut Pro captures all media from the tape as five clips, skipping over each
timecode break and ensuring that the timecode of all captured media is frame-accurate.
There you have it.

BATCH CAPTURE TAPELESS workflow still FCP is looking for a capture device when going ONLINE

Hi,
I am working on a documentary and about to go online with my edit.
I used Sony FS100. Tapeless. I did Log and Transfer to ProRes 422 in FCP 7.
Later when I run out of space I used Media Manager to RECOMPRESS everything to ProRes Proxi. Worked well.
But now when I try to batch capture to ProRes 422 FCP is looking for a capture device thinking I am working with tapes.
How do I make FCP undrerstand I am tapeless? Does the recompress kill the possibility of bach capturing back to online full quality 422?
Thanks for the support!
Gabor

I have read through some more forums and I only found one mention of the Media Manager 'Recomress' function.
It said:
"Transcoding with MM (recompress). It preserves timecode/reel name, file names, etc... Except the clip ID, which is used along with reel name and timecode to batch capture from source files (at least for P2)."
Clip ID is the metadata relyable for the work of batch capture. It seems without it it is impossible to batch capture.
I wonder why they designed Recompress like that, if it is true?

Sound but no video on tv monitor when capturing/viewing timeline

Can someone please suggest a solution to my problem? It seems that my settings have all of a sudden changed and I can no longer view the video on my tv monitor when capturing or when playing the clips in my timeline. I've already checked to see that I'm using "firewire" settings.
Any ideas what the settings should be?
Thanks!

I'm gonna jump in here as I'm in the same boat....
I'm having trouble connecting my camera as a d to a converter for monitoring.
Firewire out from computer to DV Camera / camera analog rca out to monitor. Camera shows input from lens on monitor. FCP is set to - video playback>firewire>ntsc. External video> all frames.
What do I need to do to allow throughput from FCP - camera - monitor?
Thanks for the tag-along....

What to set when capturing to an external firewire drive?

When capturing to an external firewire drive that will also be used to edit the video, what do I need to set in the Scratch Disk window? Just the scratch disk? Do I need to also set the waveform cache? thumbnail cache? autosave vault?
Thanks.

Depends on your overall configuration/workflow...but I'll usually set my external for Video Capture/Video Render/Audio Render. Then both cache files to my system drive and my Autosave Vault to the external...unless I have an additional internal or second external. I keep my Project files on the system/startup drive.
When you click on the 'Set' button, it's best to simply select the root of whatever drive you want to use. This alleviates the possibility of uncontrolled heirarchy of 'scratch folders' cluttering up your system. If you select the root, then FCP creates a "Capture Scratch" folder at the root level, and each new project gets it's own folder within the main "Capture Scratch" folder.
Setting your autosave vault somewhere other than where your project file is located, can save your butt, if your system drive (or wherever your project file is located) decides to crash.
Others may do it differently, as I do on occasion...just depends on what drives/Mac I have available at the time.
Hope that helps.
K

No audio when capturing from vcr using canopus100

When I log and capture, the video is there, and the audio tracks "show up", however, the audio cannot be heard during capture (previewed), nor is it heard when I export the movie using QuickTime conversion.
I exported the file as a QT movie and played it back in QT, and of course, no audio.
Which switch have I not thrown here?
Thanks
JD

OK, I suppose it would help to know the details to provide a proper analysis of the situation.
1) Canopus 100 is connected to vcr through the s-video input, and the audio is going in through the standard mini-jack interface.
2) FCP Capture Settings are:
Device Control: Non-Controllable Device
Capture/Input: DV NTSC 48 KHz Copy
Scratch Disk Free Space = 852.3 GB
3) The audio tracks "show up" when I do a capture...meaning, there are 2 tracks placed in the timeline. I can view some audio activity in the Waveform Monitor, but I do not actually hear any audio.
On that note, audio plays fine when capturing video from my Sony PD150.
Also, when using the same set up with the Canopus using iMovie, the audio previews, captures, and plays back just fine.
Thanks again. Any additional info needed just let me know. I really appreciate it!
JD

Selecting microphone when capturing video from the webcam

Using Final Cut Pro X
I want to capture video from my webcam into Final Cut. I have a USB microphone (Yeti) with which I want to record the audio. I cannot find an option to select my input source for audio when capturing this footage. Final Cut seems to default to my microphone on my webcam, which causes echoing and noise. I can select the USB mic when doing a voiceover, but when I capture video I cannot find an option to select my input. I've made my USB mic my default device in Sys Prefs, but that doesn't work. Any other ideas?
Options
1. Figure out how to change the default input for webcam capture in Final Cut
OR
2. Use another program. I've also tried to do the same in both QuickTime and iMovie, and they both capture audio only from the webcam as well.
Everything I've found online talks about voiceover. I don't want that. I want to capture video with it.
Suggestions are appreciated. Thank you.

acyclone wrote:
Thanks. Don't know why I didn't see it. That arrow is pretty small.
I do still have an issue that I cannot figure out. I'm using the same mic for webcam recording (now in QT thanks to Luis) and in Final Cut for voiceovers. Though I'm still on the same Mic the sound is not the same. It's close, but the sound on the voiceover sounds cleaner and clearer. I'm sitting in the same spot speaking the same way, but the sound quality difference is noticable. Not sure why.
It seems that the difference is in how each software deals with it.
It may be that QT is sampling audio differently from FCP X somehow, or using a different audio codec or whatever.
Just guessing, I really have no concrete knowledge.
Oh, wait: there are a few things that I can notice, after trying a small example: the QT audio is AAC at 44.1 KHz,
the FCP X is AIFF at 48KHz. Compression and sample rate are different.

Can FCP7 Regen Time Code when capturing from tape to allow for TC Breaks?

Can FCP7 Regen Time Code when capturing from tape to allow for TC Breaks? Or does it start capturing with time code from the tape and then just keeps rolling regardless of TC breaks on the tape, thus not matching code after the first TC break? I don't see any preferences where you can ask it to regenerate the code it is writing based on the code it's receiving from the tape (i.e. continuous jam). I'm guessing it just keeps on going with the code it started with. Anyone know different?
Thanks!

It is not clear from your post what you want FCP to do when it encounters the timecode break on the tape that it is ingesting.
You have three choices:
If you choose "Make New Clip" then FCP will stop, roll the tape forward to legitimate code, and then attempt a pre-roll and start capturing again. The new clip will have timecode that corresponds to the timecode on the tape.
If you choose "Warn After Capture", FCP will keep ingesting and the timecode will continue contiguously from the source code of your starting clip, meaning it won't match the tape after the point of the break.
MtD

Final Cut wont recognize when i push esc when capturing now.

Final Cut wont recognize when i push esc when capturing now on an uncontrolled device.
help.

I have captured from a VHS player thru a camcorder to FCP, but never experienced a Capture Now not stopping after pressing the ESC key. I did a quick search and found a question similar to yours. The following suggestions are mostly from a response posted by Tony Gay:
1. Trash the FCP preferences. Try Preference Manager for doing that if you don't already have it.
2. Run Disk Utility and select Repair Disk Permissions
3. Check your System Prefs, make sure that your Energy Saver settings are so that the system stays awake and disks do not power down.
4. The FCP preferences will need to be reset. If using Capture Now, check that it is not limited, reset your drives and etc.
5. Check that the codec of the camera/tape match the setting that you are capturing with.
6. Try capturing a short piece using Log and Capture...
7. Try Capture Now.
The person with the problem posted back reporting that after doing the above, ESC was again working with Capture Now.
Good luck.

Error using pretrigger when capturing more than one channel

I am having problems acquiring data with pretrigger samples when capturing more than one channel, using NI-PXI-6071E hardware and Labview's Analog Input VIs (Legacy NI-DAQ).
My goal is to trigger on one signal, while capturing another. Unfortunately, I cannot use the PFI0 for external triggering, as our cables/hardware have already been built, so I must use an analog input channel as the trigger. I understand that to do so I must capture both channels, and the channel that I wish to trigger off of must be the first channel in the list.
If I trigger and capture on the same channel (tried 1-4) then it
works great, regardless of the number of pre-trigger samples set. If I
capture more than one channel (passing the trigger channel first), with no pretrigger samples set, then triggering and capturing both work fine. However, if I do the same with the pretrigger sample > 0 I get the following error:
Error -10621 occurred at AI Control. Possible reason(s):
NI-DAQ LV: The specified trigger signal cannot be assigned to the trigger resource.
I don't se any such limitation explained in the user manual, and searching the forum, I have found a few other people that had the
same
problem
but they did not have solutions. Any ideas?
Solved!
Go to Solution.

I'm sorry for double-posting this. I was trying to post it in the DAQ board and it kept ending up on the LabView board.
If moderators have the ability to delete this thread you are welcome to do so.

Final Cut Express: No audio when capturing from camcorder

When capturing video from my "Sony TRV 18" digital camcorder and a Canon ZR500 digital camcorder
into Final Cut Express 4.0.1 via fire wire to my scratch disk - a LaCie external hard drive -
I get the video in my browser but it has no accompanying audio.
When I move a captured clip from the browser to the viewer and time line, the video shows up, but (1) there is no accompanying audio shown in the audio time line, (2) no audio can be heard and (3) the audio meters show no action.
My Easy Setup settings for audio match my camera audio settings.
I've used different firewires between the camera and the scratch disk. Still the same.
This has been a problem for about a month. Everything worked fine before. To make project deadlines, I have worked around this anomaly by capturing clips in IMovie 4 on my older Mac laptop than transferring the media clips to my Final Cut Express scratch disk. That works, but it is time consuming and requires rendering of all the audio.
I use an IMac with OSX 10.6.5 with 266 GHz intel Core i5.
Thank you in advance for any tips that could help.

Hi Sid
I get the video in my browser but it has no accompanying audio.
YES - This is the way FinalCut Express AND Pro works !
If You need the audio - Then You connect a small set of speakers to Your miniDV Camera
(headphone out)
alt. if no phono-out on Camera is to connect a small TV to the Camera analog way
and here You can both see and hear during Capture
(BTW - Connecting a small TV (or if §§§§§ is no problem a reference monitor
§5-10,000 or even more) is a Very good way of keeping Quality control during
editing process. Eg Transitions, audio levels, color fidelity etc. I do and the
ref monitor are well compared to my final DVDs.)
There are NO WAY that You can monitor audio during Capture in any FinalCut versions !
Yours (been there and done that - or as said in Sweden "butted Your head at it") Bengt W

A way to adjust audio when capturing video?

I transfered some video/audio and am having distortion in some audio.
The original audio does not peak and when I captured it in Premiere CS6, it is not peaking out, but when I play back, I can hear occasional distortion. The video is up at:
http://www.youtube.com/watch?v=aNNgJiZMrRA
Does this sound like it is overmodulating or is something else happening?
Is there a way to adjust audio when capturing audio or is it a straight feed? Wondering if I can lower the audio input to try to fix.
thanks in advance for your help,
Charlie

How are you capturing the content? Because in my experince premiere doesn't have a way to adjust the audio levels of what your capturing. However if you post how you are capturing the footage in more detail I might be able to help. Please tell me exactly how you have everything hooked up.
For example if you have the camera hooked straight to the computer or if you're using a capture card if so what kind. Some capture cards have audio gain settings which might be causing the issue. Also some decks and cameras have audio playback volume settings which can also cause audio to be sent to premiere louder than what it started as. So if you give more detail I may be able to offer some sort of help.
One thing you might try though to remove that distortion is too add a lowpass filter to the audio, and start off by setting the low pass filter to like 3000 and just adjust by 500 up or down from there until the distortion goes away. I've had to do this in the past with audio that's distorted before. (Although I haven't experinced the specific issue you're experincing before.) Although it will make the persons voice sound muffled it will take most of the distortion out. Which getting rid of distortion at the cost of making it sound somewhat muffled is a decent trade off if worse comes to worse and you can't get the issue figured out.

Change the video resolution when capturing a WEB-cameras

Language: Java
It is used in addition: JMF
When capturing video from WEB-cameras with JMF - getting the video is at the lowest resolution.
Can you please tell how to change the video resolution?
The code by which the captured image (no SWING-forms):
MediaLocator getWebCam = new MediaLocator("vfw://0");
private Player player;
Timer timer = new Timer(40, this);
public BufferedImage grabFrameImage() {
Image image = null;
FrameGrabbingControl frameGrabbingControl = null;
if (player != null)
frameGrabbingControl = (FrameGrabbingControl) player.getControl("javax.media.control.FrameGrabbingControl");
Buffer buffer = frameGrabbingControl.grabFrame();
if (buffer != null)
image = new BufferToImage((VideoFormat) buffer.getFormat()).createImage(buffer);
if (image != null)
return (BufferedImage) image;
return null;
public WorkWithWebCam() throws NoDataSourceException, IOException, NoPlayerException {
initComponents();
player = Manager.createPlayer(Manager.createDataSource(getWebCam));
player.start();
private void jButton1ActionPerformed(ActionEvent e) {
timer.start();
public static void main(String args[]) {
EventQueue.invokeLater(new Runnable() {
public void run() {
try{
new WorkWithWebCam().setVisible(true);
}catch(Exception ex){}
public void actionPerformed(ActionEvent e) {
panelMain.getGraphics().drawImage(this.grabFrameImage(), 0, 0, 400, 300, null);
P.S. Can you please tell how this forum can be identified code \ listing?

Hello,
I don't know if there is a way to change the video. But I think you can easily use your own videos by using a local .mpg or .3gp file via InputStream. Just change the player's parameters in video/mpg instead of capture://video.
Hope it helps...
Torsten

Fcp 5.03 halts when capturing

Similar Messages

Maybe you are looking for