FCP 6 sequence fails in Compressor 3

I have a 60 minute project comprising three 20 minute sequences. They are of mixed media clips (TIFFs, H.264, DV, etc). I'm exporting each to Compressor.
Sequences 1 and 3 are compressed just fine. But Sequence 2 fails again and again, even after trashing preferences, restarting, etc. There is no explanation other than 'failed', which is of no use. Any suggestions as to how I can work out why one sequence just will not work?

If you are editing in on a timeline with a codec  that is equal or better in quality than your source material, you will not see any quality loss when you export a QuickTime movie in the sequence codec, and then use that file in Compressor.
A usual workflow is to edit in FCP-7, then export a master file of the finished edit, and then take that master file into Compressor to create your deliverables.
H.264 is not an edit friendly codec in FCP, the fact that you have had success is a function of luck. H.264 files should be converted to an edit friendly codec prior to ingest in FCP. Problems with H.264 files show up in all kinds of unexpected ways. If you check this forum, you'll find countless posts on this subject.
This, however, may not be your problem. Exporting the Sequence as a QuickTime is another way to test the integrity of the sequence - if you have a successful export, then you know the sequence is not problem and the media itself, when presented as source files to Compressor, is.
MtD

Similar Messages

  • Why can't I export my FCP 6 sequence using Compressor 3?

    I am wondering if anyone can tell me why I can't export my FCP 6 sequence using Compressor 3.0.5. 
    I have an hour-long 1080p Pro Res 422 sequence that I am trying to export using Compressor 3.  Whether I export using the 'Pro Res 422' preset or the 'H.264' preset, transcoding commences but then stops abruptly 15 to 20 minutes later with an error message saying 'Quicktime Error: -50.'
    For what it's worth, I have an early-2008 dual quad-core Mac Pro desktop with 6 GB of RAM and two ATI Radeon 5770 graphics cards.  I am currently running OS X 10.6.8.  The media (including Motion graphics) and project file are on an external drive connected via Firewire 800.
    Any advice on how to properly export this sequence at the highest quality without getting the error message is greatly appreciated!
    Shaun

    Are you "sending" to compressor?  Probably not the best way to work.
    First step:  make sure the sequence is COMPLETELY rendered.  If you don't understand how to do that, post back.
    Then, I'd strongly recommend that you export a quicktime file with current settings (file:  export:  quicktime movie NOT quicktime conversion) and bring that file into compressor and chose the appropriate preset.
    This workflow isolates each step and makes it easier to troubleshoot.
    Here are a few user tips that might be helpful
    Some tips for using compressor
    Common FCP Troubleshooting tips
    sending to compressor from fcp - a few issues

  • FCP won't run with Compressor open

    I have FCP 6 and the latest Compressor.
    I had no problem exporting my current file through compressor in the past. But, now, out of the blue, when I export the file to compressor, the color wheel instantly appears in FCP and the program will not respond. I can still work within compressor, but when I submit the job, it fails to start.
    At that point, I can only cancel the job and try to quit compressor, but it hangs and won't close. So I have to force quit.
    And then, as soon as compressor is closed, the color wheel on FCP disappears and everything is fine, like it never happened...
    Any ideas?
    Thanks.

    Actually, the color wheel doesn't start in FCP until I submit my file in compressor.

  • Deploy OS task sequence fails when deploying to multiple computers

    Hi gang,
    I'm running into an issue when imaging multiple computers with MDT 2012. Let me give some background info.
    I have installed Windows 7 64 bit on a laptop in audit mode, made my configurations, sysprepped the machine, and captured a .wim using WDS (captured to an external hard drive). I then imported this .wim into MDT, created a Standard Client Task Sequence to deploy
    the image, and successfully deployed it to a machine.
    My problem comes up when I initiate this task sequence on multiple computers simultaneously. If I put 6 computers side-by-side and run the task sequence at the same time, only a couple machines will actually succeed. The rest fail with the following:
    FAILURE ( 5624 ): 2: Run ImageX: /apply "\\CAAPPWN40\DeploymentShare$\Operating Systems\T731 (Final) Windows 7 64 bit May 2013\T731 (Final) Windows 7 64 bit May 2013.wim"
    1 C:
    Litetouch deployment failed. Return Code = -2147467259 0x80004005
    Failed to run the action: Install Operating System
    Unknown error (Error: 000015F8; Source: Unknown)
    The execution of the group (Install) has failed and the execution has been aborted. An action failed.
    Operating aborted (Error: 80004004; Source: Windows)
    Failed to run the last action: Install Operating System. Execution of task sequence failed.
    Unknown error (Error: 000015F8; Source: Unknown)
    Task Sequence Engine failed! Code: enExecutionFail
    Task sequence execution failed with error code 80004005
    Error Task Sequence Manager failed to execute task sequence. Code 0x80004005
    BDD.log is saying that "The file or directory is corrupted and unreadable."
    If I restart the computer, boot back into PXE, and run the task sequence again, this time on it's own (as opposed to 6 computers at once) it works fine.
    Can anyone help?

    I just rebooted the server and tried again, same result.
    I keep getting a "Body text cannot contain links or images until we are able to verify your account" error when posting a hyperlink. I've had my technet account since October... weird.
    Here's the snippet that's important:
    <![LOG[ Console > [ 18% ] Applying progress: 14:47 mins remaining ]LOG]!><time="11:27:10.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console > [ 19% ] Applying progress: 14:27 mins remaining ]LOG]!><time="11:27:18.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console > [ 20% ] Applying progress: 14:15 mins remaining ]LOG]!><time="11:27:32.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console > [ RETRY ] Restoring C:\Program Files (x86)\Common Files\microsoft shared\OFFICE15\MSORES.DLL again (Error = 1392)]LOG]!><time="11:27:40.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console > [ 21% ] Applying progress: 14:06 mins remaining ]LOG]!><time="11:27:42.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console > [ 22% ] Applying progress: 13:49 mins remaining ]LOG]!><time="11:27:48.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console > [ 23% ] Applying progress: 13:29 mins remaining ]LOG]!><time="11:27:55.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ZTI Heartbeat: command has been running for 5 minutes (process ID 516)]LOG]!><time="11:28:01.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console > [ RETRY ] Restoring C:\Program Files (x86)\Intel Corporation\Intel Wireless Display\it\WiDiApp.resources.dll again (Error = 1392)]LOG]!><time="11:28:01.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console > [ RETRY ] Restoring C:\Program Files (x86)\Intel Corporation\Intel Wireless Display\it\WiDiApp.resources.dll again (Error = 1392)]LOG]!><time="11:28:01.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console > [ RETRY ] Restoring C:\Program Files (x86)\Intel Corporation\Intel Wireless Display\it\WiDiApp.resources.dll again (Error = 1392)]LOG]!><time="11:28:02.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console > [ RETRY ] Restoring C:\Program Files (x86)\Intel Corporation\Intel Wireless Display\it\WiDiApp.resources.dll again (Error = 1392)]LOG]!><time="11:28:02.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console > [ 24% ] Applying progress: 13:13 mins remaining ]LOG]!><time="11:28:07.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console > [ RETRY ] Restoring C:\Program Files (x86)\Microsoft Analysis Services\AS OLEDB\110\msmdlocal.dll again (Error = 1392)]LOG]!><time="11:28:13.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console > [ RETRY ] Restoring C:\Program Files (x86)\Microsoft Analysis Services\AS OLEDB\110\msmdlocal.dll again (Error = 1392)]LOG]!><time="11:28:14.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console > [ RETRY ] Restoring C:\Program Files (x86)\Microsoft Analysis Services\AS OLEDB\110\msmdlocal.dll again (Error = 1392)]LOG]!><time="11:28:15.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console > [ RETRY ] Restoring C:\Program Files (x86)\Microsoft Analysis Services\AS OLEDB\110\msmdlocal.dll again (Error = 1392)]LOG]!><time="11:28:16.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console > [ ERROR ] C:\Program Files (x86)\Microsoft Analysis Services\AS OLEDB\110\msmdlocal.dll (Error = 1392)]LOG]!><time="11:28:17.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console > Error restoring image.]LOG]!><time="11:28:17.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Console > The file or directory is corrupted and unreadable. ]LOG]!><time="11:28:17.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Return code from command = 2]LOG]!><time="11:28:17.000+000" date="06-11-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[FAILURE ( 5624 ): 2: Run ImageX: /apply "\\MyServer\DeploymentShare$\Operating Systems\T731 (Final) Windows 7 64 bit May 2013\T731 (Final) Windows 7 64 bit May 2013.wim" 1 C:]LOG]!><time="11:28:17.000+000" date="06-11-2013" component="LTIApply" context="" type="3" thread="" file="LTIApply">
    <![LOG[Command completed, return code = -2147467259]LOG]!><time="11:28:18.000+000" date="06-11-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Litetouch deployment failed, Return Code = -2147467259 0x80004005]LOG]!><time="11:28:18.000+000" date="06-11-2013" component="LiteTouch" context="" type="3" thread="" file="LiteTouch">

  • Task sequence failed with error 80070002

    Dears,
    I'm trying deploy OSD, it was working since yesterday but from today I'm facing a problem it's fails with the above error, i got the log file smsts and here it is
    Set command line: "OSDApplyOS.exe" /data:BHN00018,1 /target:0,1
    ApplyOperatingSystem 3/27/2013 3:05:22 PM
    1828 (0x0724)
    Adding logical drive: C: ApplyOperatingSystem
    3/27/2013 3:05:22 PM 1828 (0x0724)
    Skipping non-local logical drive: E: ApplyOperatingSystem
    3/27/2013 3:05:22 PM 1828 (0x0724)
    Adding logical drive: S: ApplyOperatingSystem
    3/27/2013 3:05:22 PM 1828 (0x0724)
    Skipping non-local logical drive: X: ApplyOperatingSystem
    3/27/2013 3:05:22 PM 1828 (0x0724)
    The volume S:\ exists and is a local hard drive.
    ApplyOperatingSystem 3/27/2013 3:05:22 PM
    1828 (0x0724)
    The volume S:\ is using a valid file system.
    ApplyOperatingSystem 3/27/2013 3:05:22 PM
    1828 (0x0724)
    Windows target partition is 0-1, driver letter is S:\
    ApplyOperatingSystem 3/27/2013 3:05:22 PM
    1828 (0x0724)
    Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL'
    ApplyOperatingSystem 3/27/2013 3:05:22 PM
    1828 (0x0724)
    The machine does not have a local client cache.
    ApplyOperatingSystem 3/27/2013 3:05:22 PM
    1828 (0x0724)
    ResolveSource flags: 0x00000000 ApplyOperatingSystem
    3/27/2013 3:05:22 PM 1828 (0x0724)
    SMSTSPersistContent: . The content for package BHN00018 will be persisted
    ApplyOperatingSystem 3/27/2013 3:05:22 PM
    1828 (0x0724)
    DownloadOnDemand flag is true. Attempting to download content locally for Package BHN00018..
    ApplyOperatingSystem 3/27/2013 3:05:22 PM
    1828 (0x0724)
    Package Flags: 0x1000000 ApplyOperatingSystem
    3/27/2013 3:05:22 PM 1828 (0x0724)
    GetDirectoryListing() entered ApplyOperatingSystem
    3/27/2013 3:05:22 PM 1828 (0x0724)
    Initializing HTTP transport. ApplyOperatingSystem
    3/27/2013 3:05:22 PM 1828 (0x0724)
       Setting URL = http://PRBAHVSSCCM.ARABBANKING.LOCAL/SMS_DP_SMSPKG$/BHN00018.
    ApplyOperatingSystem 3/27/2013 3:05:22 PM
    1828 (0x0724)
       Address=http://PRBAHVSSCCM.ARABBANKING.LOCAL, Scheme=http, Object=/SMS_DP_SMSPKG$/BHN00018, Port=80.
    ApplyOperatingSystem 3/27/2013 3:05:22 PM
    1828 (0x0724)
       Setting Authenticator. ApplyOperatingSystem
    3/27/2013 3:05:22 PM 1828 (0x0724)
    Set authenticator in transport ApplyOperatingSystem
    3/27/2013 3:05:22 PM 1828 (0x0724)
    WinHttp credentials set ApplyOperatingSystem
    3/27/2013 3:05:22 PM 1828 (0x0724)
    CLibSMSMessageWinHttpTransport::Send: URL: PRBAHVSSCCM.ARABBANKING.LOCAL:80  PROPFIND /SMS_DP_SMSPKG$/BHN00018
    ApplyOperatingSystem 3/27/2013 3:05:22 PM
    1828 (0x0724)
    401 - Authentication failure on request with anonymous access, retrying with context credentials.
    ApplyOperatingSystem 3/27/2013 3:05:22 PM
    1828 (0x0724)
    Using thread token for request ApplyOperatingSystem
    3/27/2013 3:05:22 PM 1828 (0x0724)
    401 - Authentication failure on request with context credentials, retrying with supplied credentials.
    ApplyOperatingSystem 3/27/2013 3:05:22 PM
    1828 (0x0724)
    Request was succesful. ApplyOperatingSystem
    3/27/2013 3:05:22 PM 1828 (0x0724)
    DAV response string is: 
     <?xml version="1.0" encoding="utf-8" ?><D:multistatus xmlns:D="DAV:"><D:response><D:href>http://PRBAHVSSCCM.ARABBANKING.LOCAL/SMS_DP_SMSPKG$/sccm?/BHN00018/</D:href><D:propstat><D:status>HTTP/1.1
    200 OK</D:status><D:prop><D:getcontenttype/><D:supportedlock/><D:getetag/><D:creationdate/><D:iscollection>1</D:iscollection><D:resourcetype><D:collection/></D:resourcetype><D:ishidden>0</D:ishidden><D:displayname>http://PRBAHVSSCCM.ARABBANKING.LOCAL/SMS_DP_SMSPKG$/sccm?/BHN00018/</D:displayname><D:getlastmodified></D:getlastmodified><D:getcontentlanguage/><D:getcontentlength>0</D:getcontentlength></D:prop></D:propstat></D:response><D:response><D:href>http://PRBAHVSSCCM.ARABBANKING.LOCAL/SMS_DP_SMSPKG$/BHN00018/sccm?/Win7-x86-BasicApps.wim</D:href><D:propstat><D:status>HTTP/1.1
    200 OK</D:status><D:prop><D:getcontenttype/><D:lockdiscovery/><D:supportedlock/><D:getetag/><D:getcontentlanguage/><D:iscollection>0</D:iscollection><D:creationdate/><D:resourcetype/><D:ishidden>0</D:ishidden><D:displayname>http://PRBAHVSSCCM.ARABBANKING.LOCAL/SMS_DP_SMSPKG$/BHN00018/sccm?/Win7-x86-BasicApps.wim</D:displayname><D:getlastmodified>Thu,
    21 Mar 2013 09:21:33 GMT</D:getlastmodified><D:getcontentlength>4984262577</D:getcontentlength></D:prop></D:propstat></D:response></D:multistatus>
    ApplyOperatingSystem 3/27/2013 3:05:22 PM
    1828 (0x0724)
    List of files to be downloaded ApplyOperatingSystem
    3/27/2013 3:05:22 PM 1828 (0x0724)
      File: http://PRBAHVSSCCM.ARABBANKING.LOCAL:80/SMS_DP_SMSPKG$/BHN00018/sccm?/Win7-x86-BasicApps.wim
    ApplyOperatingSystem 3/27/2013 3:05:22 PM
    1828 (0x0724)
    GetDirectoryListing() successfully completed
    ApplyOperatingSystem 3/27/2013 3:05:22 PM
    1828 (0x0724)
    Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL'
    ApplyOperatingSystem 3/27/2013 3:05:22 PM
    1828 (0x0724)
    dwStatusCode >= 200 && dwStatusCode <= 299, HRESULT=801901f4 (e:\nts_sccm_release\sms\framework\tscore\downloadcontent.cpp,1304)
    ApplyOperatingSystem 3/27/2013 3:05:23 PM
    1828 (0x0724)
    WinHttpQueryHeaders() returns status code 500 (Internal Server Error)
    ApplyOperatingSystem 3/27/2013 3:05:23 PM
    1828 (0x0724)
    SendWinHttpRequest failed. 801901f4. ApplyOperatingSystem
    3/27/2013 3:05:23 PM 1828 (0x0724)
    SendWinHttpRequest (hSession, hConnect, hRequest, sRequest.c_str(), 0, bUseSSL, ullFileSize, LastGoodCredentialsType), HRESULT=801901f4 (e:\nts_sccm_release\sms\framework\tscore\downloadcontent.cpp,1542)
    ApplyOperatingSystem 3/27/2013 3:05:23 PM
    1828 (0x0724)
    DownloadFile failed. 801901f4. ApplyOperatingSystem
    3/27/2013 3:05:23 PM 1828 (0x0724)
    DownloadFile (hSession, hConnect, sSourceFile.c_str(), sDestinationFile.c_str(), ulTotalSizeRequired, ulDownLoaded, LastGoodCredentialsType, bUseSSL), HRESULT=801901f4 (e:\nts_sccm_release\sms\framework\tscore\downloadcontent.cpp,1648)
    ApplyOperatingSystem 3/27/2013 3:05:23 PM
    1828 (0x0724)
    Error downloading file from http://PRBAHVSSCCM.ARABBANKING.LOCAL:80/SMS_DP_SMSPKG$/BHN00018/sccm?/Win7-x86-BasicApps.wim to C:\_SMSTaskSequence\Packages\BHN00018\Win7-x86-BasicApps.wim
    ApplyOperatingSystem
    3/27/2013 3:05:23 PM 1828 (0x0724)
    DownloadFiles failed. 801901f4. ApplyOperatingSystem
    3/27/2013 3:05:23 PM 1828 (0x0724)
    DownloadFiles (setDirs, setFiles, sDestination.c_str(), bUseSSL), HRESULT=801901f4 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,2523)
    ApplyOperatingSystem 3/27/2013 3:05:23 PM
    1828 (0x0724)
    Retrying download... ApplyOperatingSystem
    3/27/2013 3:05:23 PM 1828 (0x0724)
    GetDirectoryListing() entered ApplyOperatingSystem
    3/27/2013 3:05:26 PM 1828 (0x0724)
    Initializing HTTP transport. ApplyOperatingSystem
    3/27/2013 3:05:26 PM 1828 (0x0724)
       Setting URL = http://PRBAHVSSCCM.ARABBANKING.LOCAL/SMS_DP_SMSPKG$/BHN00018.
    ApplyOperatingSystem 3/27/2013 3:05:26 PM
    1828 (0x0724)
       Address=http://PRBAHVSSCCM.ARABBANKING.LOCAL, Scheme=http, Object=/SMS_DP_SMSPKG$/BHN00018, Port=80.
    ApplyOperatingSystem 3/27/2013 3:05:26 PM
    1828 (0x0724)
       Setting Authenticator. ApplyOperatingSystem
    3/27/2013 3:05:26 PM 1828 (0x0724)
    Set authenticator in transport ApplyOperatingSystem
    3/27/2013 3:05:26 PM 1828 (0x0724)
    WinHttp credentials set ApplyOperatingSystem
    3/27/2013 3:05:26 PM 1828 (0x0724)
    CLibSMSMessageWinHttpTransport::Send: URL: PRBAHVSSCCM.ARABBANKING.LOCAL:80  PROPFIND /SMS_DP_SMSPKG$/BHN00018
    ApplyOperatingSystem 3/27/2013 3:05:26 PM
    1828 (0x0724)
    401 - Authentication failure on request with anonymous access, retrying with context credentials.
    ApplyOperatingSystem 3/27/2013 3:05:26 PM
    1828 (0x0724)
    Using thread token for request ApplyOperatingSystem
    3/27/2013 3:05:26 PM 1828 (0x0724)
    401 - Authentication failure on request with context credentials, retrying with supplied credentials.
    ApplyOperatingSystem 3/27/2013 3:05:26 PM
    1828 (0x0724)
    Request was succesful. ApplyOperatingSystem
    3/27/2013 3:05:26 PM 1828 (0x0724)
    DAV response string is: 
     <?xml version="1.0" encoding="utf-8" ?><D:multistatus xmlns:D="DAV:"><D:response><D:href>http://PRBAHVSSCCM.ARABBANKING.LOCAL/SMS_DP_SMSPKG$/sccm?/BHN00018/</D:href><D:propstat><D:status>HTTP/1.1
    200 OK</D:status><D:prop><D:getcontenttype/><D:supportedlock/><D:getetag/><D:creationdate/><D:iscollection>1</D:iscollection><D:resourcetype><D:collection/></D:resourcetype><D:ishidden>0</D:ishidden><D:displayname>http://PRBAHVSSCCM.ARABBANKING.LOCAL/SMS_DP_SMSPKG$/sccm?/BHN00018/</D:displayname><D:getlastmodified></D:getlastmodified><D:getcontentlanguage/><D:getcontentlength>0</D:getcontentlength></D:prop></D:propstat></D:response><D:response><D:href>http://PRBAHVSSCCM.ARABBANKING.LOCAL/SMS_DP_SMSPKG$/BHN00018/sccm?/Win7-x86-BasicApps.wim</D:href><D:propstat><D:status>HTTP/1.1
    200 OK</D:status><D:prop><D:getcontenttype/><D:lockdiscovery/><D:supportedlock/><D:getetag/><D:getcontentlanguage/><D:iscollection>0</D:iscollection><D:creationdate/><D:resourcetype/><D:ishidden>0</D:ishidden><D:displayname>http://PRBAHVSSCCM.ARABBANKING.LOCAL/SMS_DP_SMSPKG$/BHN00018/sccm?/Win7-x86-BasicApps.wim</D:displayname><D:getlastmodified>Thu,
    21 Mar 2013 09:21:33 GMT</D:getlastmodified><D:getcontentlength>4984262577</D:getcontentlength></D:prop></D:propstat></D:response></D:multistatus>
    ApplyOperatingSystem 3/27/2013 3:05:26 PM
    1828 (0x0724)
    List of files to be downloaded ApplyOperatingSystem
    3/27/2013 3:05:26 PM 1828 (0x0724)
      File: http://PRBAHVSSCCM.ARABBANKING.LOCAL:80/SMS_DP_SMSPKG$/BHN00018/sccm?/Win7-x86-BasicApps.wim
    ApplyOperatingSystem 3/27/2013 3:05:26 PM
    1828 (0x0724)
    GetDirectoryListing() successfully completed
    ApplyOperatingSystem 3/27/2013 3:05:26 PM
    1828 (0x0724)
    dwStatusCode >= 200 && dwStatusCode <= 299, HRESULT=801901f4 (e:\nts_sccm_release\sms\framework\tscore\downloadcontent.cpp,1304)
    ApplyOperatingSystem 3/27/2013 3:05:26 PM
    1828 (0x0724)
    WinHttpQueryHeaders() returns status code 500 (Internal Server Error)
    ApplyOperatingSystem 3/27/2013 3:05:26 PM
    1828 (0x0724)
    SendWinHttpRequest failed. 801901f4. ApplyOperatingSystem
    3/27/2013 3:05:26 PM 1828 (0x0724)
    SendWinHttpRequest (hSession, hConnect, hRequest, sRequest.c_str(), 0, bUseSSL, ullFileSize, LastGoodCredentialsType), HRESULT=801901f4 (e:\nts_sccm_release\sms\framework\tscore\downloadcontent.cpp,1542)
    ApplyOperatingSystem 3/27/2013 3:05:26 PM
    1828 (0x0724)
    DownloadFile failed. 801901f4. ApplyOperatingSystem
    3/27/2013 3:05:26 PM 1828 (0x0724)
    DownloadFile (hSession, hConnect, sSourceFile.c_str(), sDestinationFile.c_str(), ulTotalSizeRequired, ulDownLoaded, LastGoodCredentialsType, bUseSSL), HRESULT=801901f4 (e:\nts_sccm_release\sms\framework\tscore\downloadcontent.cpp,1648)
    ApplyOperatingSystem 3/27/2013 3:05:26 PM
    1828 (0x0724)
    Error downloading file from http://PRBAHVSSCCM.ARABBANKING.LOCAL:80/SMS_DP_SMSPKG$/BHN00018/sccm?/Win7-x86-BasicApps.wim to C:\_SMSTaskSequence\Packages\BHN00018\Win7-x86-BasicApps.wim
    ApplyOperatingSystem
    3/27/2013 3:05:26 PM 1828 (0x0724)
    DownloadFiles failed. 801901f4. ApplyOperatingSystem
    3/27/2013 3:05:26 PM 1828 (0x0724)
    DownloadFiles (setDirs, setFiles, sDestination.c_str(), bUseSSL), HRESULT=801901f4 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,2523)
    ApplyOperatingSystem 3/27/2013 3:05:26 PM
    1828 (0x0724)
    Retrying download... ApplyOperatingSystem
    3/27/2013 3:05:26 PM 1828 (0x0724)
    Tried all the available http based locations. SMB based locations will be attempted now.
    ApplyOperatingSystem 3/27/2013 3:05:29 PM
    1828 (0x0724)
    !saSMBContentSources.empty(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,2948)
    ApplyOperatingSystem 3/27/2013 3:05:29 PM
    1828 (0x0724)
    DownloadContentAndVerifyHash(pszPackageID, L"SMSPackage", saHttpContentSources, saSMBContentSources, saMulticastContentSources, sDestination, dwFlags, L"", 0, dwPackageFlags, pszUserName, pszUserPassword ), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,3106)
    ApplyOperatingSystem 3/27/2013 3:05:29 PM
    1828 (0x0724)
    DownloadContentLocally(pszSource, sSourceDirectory, dwFlags, hUserToken, pszUserName, pszUserPassword), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,3331)
    ApplyOperatingSystem 3/27/2013 3:05:29 PM
    1828 (0x0724)
    ResolveSource(pszSource, sSourceDirectory, dwFlags, 0, 0, 0), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,3221)
    ApplyOperatingSystem 3/27/2013 3:05:29 PM
    1828 (0x0724)
    TS::Utility::ResolveSource( this->packageID, this->packagePath ), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\applyos\installimage.cpp,1483)
    ApplyOperatingSystem 3/27/2013 3:05:29 PM
    1828 (0x0724)
    resolvePkgSource(), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\applyos\installimage.cpp,1503)
    ApplyOperatingSystem 3/27/2013 3:05:29 PM
    1828 (0x0724)
    Apply(), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\applyos\installimage.cpp,1712)
    ApplyOperatingSystem 3/27/2013 3:05:29 PM
    1828 (0x0724)
    Installation of image 1 in package BHN00018 failed to complete.. 
    The system cannot find the file specified. (Error: 80070002; Source: Windows)
    ApplyOperatingSystem 3/27/2013 3:05:29 PM
    1828 (0x0724)
    installer.install(), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\applyos\installimage.cpp,1787)
    ApplyOperatingSystem 3/27/2013 3:05:29 PM
    1828 (0x0724)
    Entering ReleaseSource() for C:\_SMSTaskSequence\Packages\BHN00018
    ApplyOperatingSystem 3/27/2013 3:05:29 PM
    1828 (0x0724)
    The user tries to release a source directory C:\_SMSTaskSequence\Packages\BHN00018 that is either already released or we have not connected to it
    ApplyOperatingSystem 3/27/2013 3:05:29 PM
    1828 (0x0724)
    InstallImage( g_InstallPackageID, g_ImageIndex, targetVolume, ImageType_Data, g_ConfigPackageID, g_ConfigFileName, false, g_RunFromNet ), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\applyos\applyos.cpp,522)
    ApplyOperatingSystem 3/27/2013 3:05:29 PM
    1828 (0x0724)
    Process completed with exit code 2147942402
    TSManager 3/27/2013 3:05:29 PM
    1456 (0x05B0)
    TSManager 3/27/2013 3:05:29 PM
    1456 (0x05B0)
    Failed to run the action: Apply Data Image 1. 
    The system cannot find the file specified. (Error: 80070002; Source: Windows)
    TSManager 3/27/2013 3:05:29 PM
    1456 (0x05B0)
    MP server http://PRBAHVSSCCM.ARABBANKING.LOCAL. Ports 80,443. CRL=false.
    TSManager 3/27/2013 3:05:29 PM
    1456 (0x05B0)
    Setting authenticator TSManager
    3/27/2013 3:05:29 PM 1456 (0x05B0)
    Set authenticator in transport TSManager
    3/27/2013 3:05:29 PM 1456 (0x05B0)
    Sending StatusMessage TSManager
    3/27/2013 3:05:29 PM 1456 (0x05B0)
    Setting message signatures. TSManager
    3/27/2013 3:05:29 PM 1456 (0x05B0)
    Setting the authenticator. TSManager
    3/27/2013 3:05:29 PM 1456 (0x05B0)
    CLibSMSMessageWinHttpTransport::Send: URL: PRBAHVSSCCM.ARABBANKING.LOCAL:80  CCM_POST /ccm_system/request
    TSManager 3/27/2013 3:05:29 PM
    1456 (0x05B0)
    Request was succesful. TSManager
    3/27/2013 3:05:29 PM 1456 (0x05B0)
    Set a global environment variable _SMSTSLastActionRetCode=-2147024894
    TSManager 3/27/2013 3:05:29 PM
    1456 (0x05B0)
    Set a global environment variable _SMSTSLastActionSucceeded=false
    TSManager 3/27/2013 3:05:29 PM
    1456 (0x05B0)
    Clear local default environment TSManager
    3/27/2013 3:05:29 PM 1456 (0x05B0)
    Let the parent group (Install Operating System) decides whether to continue execution
    TSManager 3/27/2013 3:05:29 PM
    1456 (0x05B0)
    The execution of the group (Install Operating System) has failed and the execution has been aborted. An action failed.
    Operation aborted (Error: 80004004; Source: Windows)
    TSManager 3/27/2013 3:05:29 PM
    1456 (0x05B0)
    Failed to run the last action: Apply Data Image 1. Execution of task sequence failed.
    The system cannot find the file specified. (Error: 80070002; Source: Windows)
    TSManager 3/27/2013 3:05:29 PM
    1456 (0x05B0)
    MP server http://PRBAHVSSCCM.ARABBANKING.LOCAL. Ports 80,443. CRL=false.
    TSManager 3/27/2013 3:05:29 PM
    1456 (0x05B0)
    and when trying to open location from IIS of the http://localhost:80/SMS_DP_SMSPKG$
    i got the following error
    I don't know it is related or not, do you have any idea about that

    This post may be of some help..
    http://social.technet.microsoft.com/Forums/en-US/configmanagerdeployment/thread/baa2d7e0-599d-4bd0-a375-8905a7d0b2ff/
    Delphin

  • Build and Capture task sequence fails at 'Prepare ConfigMgr Client for Capture' step

    The scenario is as follows:
    Task Sequence is a Build and Capture of Windows 7 SP1 x64 Enterprise
    There are 17 Applications installed split into 2 'Install Application' steps due to the 9 item limit
    129 Software Updates are installed
    SCCM 2012 RTM
    I have built and captured on this system previously however there were no 'applications', just traditional SCCM 'packages'
    All task sequence steps run successfully until it gets to the 'Prepare ConfigMgr Client for Capture' step and it fails here. Here are the relevant parts of the SMSTS.log file:
    <![LOG[No certificates to delete]LOG]!><time="15:30:12.531-660" date="11-13-2012" component="PrepareSMSClient" context="" type="1" thread="2880" file="preparesmsclient.cpp:1013">
    <![LOG[Deleting Client properties from file C:\Windows\SMSCFG.INI succeeded.]LOG]!><time="15:30:12.531-660" date="11-13-2012" component="PrepareSMSClient" context="" type="1" thread="2880" file="preparesmsclient.cpp:922">
    <![LOG[Reseting the Trusted Root Key successful]LOG]!><time="15:30:12.531-660" date="11-13-2012" component="PrepareSMSClient" context="" type="1" thread="2880" file="preparesmsclient.cpp:1088">
    <![LOG[Deleting instance of 'CCM_Client' successful]LOG]!><time="15:30:12.531-660" date="11-13-2012" component="PrepareSMSClient" context="" type="1" thread="2880" file="preparesmsclient.cpp:170">
    <![LOG[Successfully reset Registration status flag to "not registered"]LOG]!><time="15:30:12.531-660" date="11-13-2012" component="PrepareSMSClient" context="" type="1" thread="2880" file="preparesmsclient.cpp:309">
    <![LOG[Successfully disabled provisioning mode.]LOG]!><time="15:30:12.546-660" date="11-13-2012" component="PrepareSMSClient" context="" type="1" thread="2880" file="preparesmsclient.cpp:1273">
    <![LOG[Start to cleanup TS policy]LOG]!><time="15:30:12.546-660" date="11-13-2012" component="PrepareSMSClient" context="" type="0" thread="2880" file="utils.cpp:2773">
    <![LOG[getPointer()->ExecQuery( BString(L"WQL"), BString(pszQuery), lFlags, pContext, ppEnum ), HRESULT=ffffffff (e:\nts_sccm_release\sms\framework\core\ccmcore\wminamespace.cpp,389)]LOG]!><time="15:35:21.000-660" date="11-13-2012" component="PrepareSMSClient"
    context="" type="0" thread="2880" file="wminamespace.cpp:389">
    <![LOG[ns.Query(sQuery, &spEnum), HRESULT=ffffffff (e:\nts_sccm_release\sms\framework\tscore\utils.cpp,2800)]LOG]!><time="15:35:21.000-660" date="11-13-2012" component="PrepareSMSClient" context="" type="0" thread="2880" file="utils.cpp:2800">
    <![LOG[Wmi query 'select * from CCM_Policy where PolicySource = 'CcmTaskSequence'' failed, hr=0xffffffff]LOG]!><time="15:35:21.000-660" date="11-13-2012" component="PrepareSMSClient" context="" type="3" thread="2880" file="utils.cpp:2800">
    <![LOG[End TS policy cleanup]LOG]!><time="15:35:21.000-660" date="11-13-2012" component="PrepareSMSClient" context="" type="0" thread="2880" file="utils.cpp:2821">
    <![LOG[TS::Utility::CleanupPolicyEx(false), HRESULT=ffffffff (e:\nts_sccm_release\sms\client\osdeployment\preparesmsclient\preparesmsclient.cpp,457)]LOG]!><time="15:35:21.000-660" date="11-13-2012" component="PrepareSMSClient" context="" type="0" thread="2880"
    file="preparesmsclient.cpp:457">
    <![LOG[Failed to delete policies compiled by TaskSequence (0xffffffff)]LOG]!><time="15:35:21.000-660" date="11-13-2012" component="PrepareSMSClient" context="" type="3" thread="2880" file="preparesmsclient.cpp:457">
    <![LOG[Failed to prepare SMS Client for capture, hr=ffffffff]LOG]!><time="15:35:21.000-660" date="11-13-2012" component="PrepareSMSClient" context="" type="3" thread="2880" file="preparesmsclient.cpp:472">
    <![LOG[pCmd->Execute(), HRESULT=ffffffff (e:\nts_sccm_release\sms\client\osdeployment\preparesmsclient\main.cpp,136)]LOG]!><time="15:35:21.000-660" date="11-13-2012" component="PrepareSMSClient" context="" type="0" thread="2880" file="main.cpp:136">
    <![LOG[Failed to prepare SMS Client for capture, hr=ffffffff]LOG]!><time="15:35:21.000-660" date="11-13-2012" component="PrepareSMSClient" context="" type="3" thread="2880" file="main.cpp:136">
    <![LOG[Process completed with exit code 4294967295]LOG]!><time="15:35:21.015-660" date="11-13-2012" component="TSManager" context="" type="1" thread="2152" file="commandline.cpp:1098">
    <![LOG[!--------------------------------------------------------------------------------------------!]LOG]!><time="15:35:21.015-660" date="11-13-2012" component="TSManager" context="" type="1" thread="2152" file="instruction.cxx:3011">
    <![LOG[Failed to run the action: Prepare ConfigMgr Client for Capture. 
    Unknown error (Error: FFFFFFFF; Source: Unknown)]LOG]!><time="15:35:21.046-660" date="11-13-2012" component="TSManager" context="" type="3" thread="2152" file="instruction.cxx:3102">
    It looks like there is a similar issue over here (http://www.windows-noob.com/forums/index.php?/topic/5906-task-sequence-error-0xffffffff/) that was resolved by removing the Application Installations one by one until a problematic one was found
    and removed - however I would rather avoid this very time consuming process if possible.
    I have also testing this using 'capture media' in the full OS and that also fails at the same step with the same errors in the smsts.log
    The only workaround I have for now is to let the task sequence fail at the 'Prepare ConfigMgr Client for Capture' step, then I uninstall the SCCM client using 'ccmsetup.exe /uninstall' and use the 'capture media' method - obviously with no SCCM client installed,
    it skips the 'Prepare ConfigMgr Client for Capture' step and goes straight to the 'Prepare OS' step and then to the actual capture to the WIM step.
    Anybody else seeing this or have any suggestions?
    My Microsoft Core Infrastructure & Systems Management blog -
    blog.danovich.com.au

    It looks like there is a similar issue over here (http://www.windows-noob.com/forums/index.php?/topic/5906-task-sequence-error-0xffffffff/) that was resolved by removing the Application Installations one by one until a problematic one was found
    and removed - however I would rather avoid this very time consuming process if possible.
    You dont have to test it 18 times....
    Just test with 50% of the applications first, if it fails, test with 25% and then on of the time...
    You should be able to find the application, within 4-5 tests...
    Ronni Pedersen | Microsoft MVP - ConfigMgr | Blogs:
    http://www.ronnipedersen.com/ and SCUG.dk/ | Twitter
    @ronnipedersen

  • OSD Task Sequence Fails with Error 0x80091007

    Hello Everyone,
    I have a bit of a weird hash mismatch problem.  The issue is only occuring on one laptop.  The laptop was imaged successfully, new out of the box.  Computer started "acting craptacular" according to the tech, so he tried to reimage it,
    assuming one of the applications he put on the computer while setting it up for the user may have messed it up.
    From that point forward, the computer couldn't image anymore.  I can image the same model, TS, and even other models without issue.  The error logs are pointing to a hash value mismatch on the OS WIM. 
    Here are the log files - I wish there was a way to make them cleaner.  I ran some hardware tests with IBM's PCDoctor, and it came back clean.  I'm starting to run out of ideas.
    Thanks in advance!
    Log: (SMSTS.LOG)
    Download done setting progress bar to 100 ApplyOperatingSystem 5/14/2010 4:09:31 PM 840 (0x0348)
    Hash could not be matched for the downloded content. Original ContentHash = A6170DC8CFC5A443636828F093C45377B5FE2A62, Downloaded ContentHash = 7DEBC67B90C2326031EF8727238176C92A02006C ApplyOperatingSystem 5/14/2010 4:09:53 PM 840 (0x0348)
    0L == TS::Utility::VerifyPackageHash(pszContentID, sDestination), HRESULT=80091007 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,2901) ApplyOperatingSystem 5/14/2010 4:09:53 PM 840 (0x0348)
    DownloadContentAndVerifyHash(pszPackageID, L"SMSPackage", saHttpContentSources, saSMBContentSources, saMulticastContentSources, sDestination, dwFlags, L"", 0, dwPackageFlags, pszUserName, pszUserPassword ), HRESULT=80091007 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,3000) ApplyOperatingSystem 5/14/2010
    4:09:53 PM 840 (0x0348)
    DownloadContentLocally(pszSource, sSourceDirectory, dwFlags, hUserToken, pszUserName, pszUserPassword), HRESULT=80091007 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,3128) ApplyOperatingSystem 5/14/2010 4:09:53 PM 840 (0x0348)
    ResolveSource(pszSource, sSourceDirectory, dwFlags, 0, 0, 0), HRESULT=80091007 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,3029) ApplyOperatingSystem 5/14/2010 4:09:53 PM 840 (0x0348)
    TS::Utility::ResolveSource( this->packageID, this->packagePath, TS::Utility::ResolveSourceFlags::PersistContents ), HRESULT=80091007 (e:\nts_sms_fre\sms\client\osdeployment\applyos\installimage.cpp,1255) ApplyOperatingSystem 5/14/2010 4:09:53
    PM 840 (0x0348)
    resolvePkgSource(), HRESULT=80091007 (e:\nts_sms_fre\sms\client\osdeployment\applyos\installimage.cpp,1299) ApplyOperatingSystem 5/14/2010 4:09:53 PM 840 (0x0348)
    Installation of image 1 in package RH1000DD failed to complete..
    The hash value is not correct. (Error: 80091007; Source: Windows) ApplyOperatingSystem 5/14/2010 4:09:53 PM 840 (0x0348)
    installer.install(), HRESULT=80091007 (e:\nts_sms_fre\sms\client\osdeployment\applyos\installimage.cpp,1373) ApplyOperatingSystem 5/14/2010 4:09:53 PM 840 (0x0348)
    Entering ReleaseSource() for C:\_SMSTaskSequence\Packages\RH1000DD ApplyOperatingSystem 5/14/2010 4:09:53 PM 840 (0x0348)
    The user tries to release a source directory C:\_SMSTaskSequence\Packages\RH1000DD that is either already released or we have not connected to it ApplyOperatingSystem 5/14/2010 4:09:53 PM 840 (0x0348)
    InstallImage( g_InstallPackageID, g_ImageIndex, targetVolume, ImageType_OS, g_ConfigPackageID, g_ConfigFileName ), HRESULT=80091007 (e:\nts_sms_fre\sms\client\osdeployment\applyos\applyos.cpp,360) ApplyOperatingSystem 5/14/2010 4:09:53 PM 840
    (0x0348)
    Process completed with exit code 2148077575 TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    !--------------------------------------------------------------------------------------------! TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    Failed to run the action: XP SP3 - Multi-HAL.
    The hash value is not correct. (Error: 80091007; Source: Windows) TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    Sending status message . . . TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    Send a task execution status message SMS_TSExecution_ActionFailError TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    MP server rh1-sccm.ritehite.com and port 80. SSL=false. CRL=false. TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    Site code: RH1 TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    Client machine name: R842AEYa TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    Client Identity: GUID:428CFC8B-1BE1-4E11-B2C4-21E31EA71572 TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    Advertisement ID: RH1200C2 TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    Package ID: RH1000DF TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    Sending StatusMessage TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    Formatted header: TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    <Msg SchemaVersion="1.1" ReplyCompression="zlib"><ID/><SourceID>56d444c9-6bf0-4ed2-86a9-5f199c90924c</SourceID><SourceHost/><TargetAddress>mp:[http]MP_StatusManager</TargetAddress><ReplyTo>direct:OSD</ReplyTo><Priority>3</Priority><Timeout>3600</Timeout><SentTime>2010-05-14T21:09:53Z</SentTime><Protocol>http</Protocol><Body
    Type="ByteRange" Offset="0" Length="4246"/><Hooks/><Payload Type="inline"/><TargetHost/><TargetEndpoint>StatusReceiver</TargetEndpoint><ReplyMode>Sync</ReplyMode><CorrelationID/></Msg>
     TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    CLibSMSMessageWinHttpTransport::Send: URL: sccmserver.x.com:80  CCM_POST /ccm_system/request TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    The request has succeeded. 200 OK TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    Set a global environment variable _SMSTSLastActionRetCode=-2146889721 TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    Set a global environment variable _SMSTSLastActionSucceeded=false TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    Clear local default environment TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    Let the parent group (Apply Operating System) decides whether to continue execution TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    Let the parent group (Install Operating System) decide whether to continue execution TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    The execution of the group (Install Operating System) has failed and the execution has been aborted. An action failed.
    Operation aborted (Error: 80004004; Source: Windows) TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    Failed to run the last action: XP SP3 - Multi-HAL. Execution of task sequence failed.
    The hash value is not correct. (Error: 80091007; Source: Windows) TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    Sending status message . . . TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)
    Send a task execution status message SMS_TSExecution_TaskSequenceFailError TSManager 5/14/2010 4:09:53 PM 1896 (0x0768)

    Hi Guys,
    My WIM is currently sitting at 1.8 GB, so I'm not sure it is the 4 GB bug you were referring to.
    I haven't tried a re-import/update DP yet mainly because the problem is occuring on only
    one computer at this moment.  In fact, I have deployed several computers already with the same DP, same WIM and even the same model of computer.  That makes me think it isn't an issue with the WIM as
    much as it is an issue with the computer itself.
    Can you guys think of anything on the computer that would cause the failure?
    Thanks again,
    Sean

  • Build & capture task sequence fails during software update installation

    I'm sure this has been discussed a thousand times already, so I hope no one minds talking about it at least one more time.  About 6 months ago I created a reference image using a build and capture task sequence within SCCM.  After discovering
    there were certain updates that would kill a task sequence (because they required multiple restarts), I was able to exclude these updates from deployment so that my task sequence completed successfully.  Fast forward to today.  I'm working on updating
    our reference image to include the last 6 months of updates.  Again, I'm having trouble with the task sequence failing to complete.  I have excluded all of the updates mentioned in
    Microsoft KB article 2894518.  I'm able to build the image with all software updates up until 6/30/2014.  When I deploy my software group that contains updates from 7/1/2014 to 12/31/2014,
    however, the task sequence fails.  I'm pulling my hair out trying to figure out which update may be causing the issue, and trust me, I don't have much hair as it is.  So, here's my question to all of the experts out there.  What is the best
    method of debugging this issue and finding which update may be the culprit?  The log files really are confusing, so I'm hoping there are some common codes or phrases I can search for within those files.  Any and all help is much appreciated.  Thanks...

    >   I'm working on updating our reference image to include the last 6 months of updates. 
    Since this is a Build & Capture task sequence and not joined to the domain, you'll need to treat it
    like a workgroup computer.  Here are the big three things that usually trip things up:
    1.  Initial Management Point:  The Setup Windows and ConfigMgr step should have the SMSMP=<fqdn>
    property specified, as the device won't be able to see the list of MP's in Active Directory
    2.  Content Location:  Make sure the reference machine's IP address falls within an IP Range
    or Subnet ID boundary, since it can't use a AD Site boundary as a workgroup machine.
    3.  Win 7 - NTLM Fallback:  Windows 7 devices may need
    hotfix KB2522623 installed (as a package/program or with offline servicing) to ensure they fall back to NTLM properly when they fail to authenticate with Kerberos.
    If you have those 3 things taken care of, then you should copy all the logs off of the machine while the
    error message is still being displayed, zip them, and then share them out through OneDrive or Dropbox.
    I hope that helps,
    Nashs
    Nash Pherson, Senior Systems Consultant
    Now Micro -
    My Blog Posts
    If you found a bug or want the product to work differently,
    share your feedback.
    <-- If this post was helpful, please click the up arrow or propose as answer.

  • Recent Software Update - Recommended for FCP X, Motion 5 and Compressor 4 Users

    There is a recent Software Update ("ProApps Quicktime Codecs") that is recommended for the FCP X, Motion 5 and Compressor 4.  Should FCP 7/FCS 3 Users download this update as well, or avoid to prevent any conflicts?

    I have one boot drive with 10.6.8 and FCS 3, and a 2nd boot drive with 10.9 and the FCP X Trial - best to avoid any problems.  Everything is smooth as glass at the moment.

  • Task Sequence Fails while trying to access a folder in PXE

    Hello Guys,
    I am facing issues while PXE.  It fails with below error.
    Logs from server :
    Severity               Type      Site code             Date / Time       
    System Component        Message ID        Description
    Error      Milestone                    2/4/2014 9:49:11 AM               
    Task Sequence Engine   11135    The task sequence execution engine failed executing the action (DiskPart DataDisk) in the group (Install Operating System) with the error code 2147942402  Action output: T=80070047 (e:\nts_sms_fre\sms\framework\tscore\tsconnection.cpp,148)
    Failed to access the share \\server.org\SMSPKGE$\PCK000AA\ with network access account !sAccessibleSource.empty(), HRESULT=80070002 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,2392) GetAccessibleLocation(pszSource,
    saResolvedPath, sSourceDirectory, dwFlags, hUserToken), HRESULT=80070002 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,3168) TS::Utility::ResolveSource(pszPkgID, sPath, 0, hUserToken, sUserName.empty() ? NULL : sUserName.c_str(), sUserName.empty()
    ? NULL : sUserPassword.c_str()), HRESULT=80070002 (e:\nts_sms_fre\sms\client\osdeployment\installsoftware\runcommandline.cpp,395) cmd.Execute(pszPkgID, sProgramName, dwCmdLineExitCode), HRESULT=80070002 (e:\nts_sms_fre\sms\client\osdeployment\installsoftware\main.cpp,385)
    Failed to find an available source location Failed to resolve the source for SMS PKGID=PCK000AA, hr=0x80070002 Install Software failed to run command line, hr=0x80070002. The operating system reported error 2147942402: The system cannot find the file specified.
    SMSTG log from PC where it fails :
    Failed to connect to "\\server.ORG\SMSPKGE$\PCK000AA" (71)
    Task Sequence fails only when acccessing one folder and below steps have been tried.
    - Network access account is configured and its working fine for all other secondary site
    - NAA is having access to folder.
    - NAA is added to Server Local Admin Access Group.
    - Deleted folder and Replicated from central
    - Granted everyone access to folder.
    It works only when other Admin Account is updated in place of existing NAA details on primary server. However the same NAA is working fine on all Primary and Secondary servers. Issue is only with one secondary server.
    Its very strange issue!!!
    Waiting for a solution.
    Mukhyaprana

    0x80070047 = "No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept."
    You must have some non-standard policy or restriction applied to the system hosting the share.
    Jason | http://blog.configmgrftw.com

  • Task Sequence failed to restore captured data from USB drive onto a new machine using UDI task requence

    Hi,
    Environment ConfigMgr 2012 R2
    Replace Scenario: Capture data to a USB external drive and Restore it from USB external drive.
    Steps taken:
    1) Created Computer Association with New computer and Source computer
    2) Deployed UDI replace Task Sequence to Source computer and captured data to a USB external drive
    3) Run UDI Task Sequence from Boot Media to Restore data from USB External drive which had the captured data.
    Issue:
    My task sequence failed to restore data from USB external drive.
    Is there a fix
    Any help is greatly appreciated it. 

    I created a query to see the deployment logs in real time. I see the TS fails when running "Request State Store" task. Here are the logs.
    Severity Type Site code Date / Time System Component Message ID Description
    Error Milestone POK 7/22/2014 4:13:15 PM MININT-P6E4T6G Task Sequence Engine 11141 The task sequence execution engine failed execution of a task sequence. The operating system reported error 1: Incorrect function.
    Error Milestone POK 7/22/2014 4:13:15 PM MININT-P6E4T6G Task Sequence Engine 11135 The task sequence execution engine failed executing the action (Error in the task sequence) in the group (Gather Logs and StateStore on Failure)
    with the error code 1  Action output: [ smsswd.exe ] PackageID = '' BaseVar = '', ContinueOnError='' ProgramName = 'cscript "C:\_SMSTaskSequence\WDPackage\scripts\ztierrormsg.wsf"' SwdAction = '0001' Set command line: Run command line Working dir 'not
    set' Executing command line: Run command line Process completed with exit code 1 Microsoft (R) Windows Script Host Version 5.8 Copyright (C) Microsoft Corporation. All rights reserved.  Microsoft Deployment Toolkit version: 6.2.5019.0 The task sequencer
    log is located at C:\WINDOWS\CCM\Logs\SMSTSLog\SMSTS.LOG.  For task sequence failures, please consult this log. ZTI deployment failed, Return Code = 1 Command line returned 1. The operating system reported error 1: Incorrect function.
    Information Milestone POK 7/22/2014 4:13:14 PM MININT-P6E4T6G Task Sequence Engine 11134 The task sequence execution engine successfully completed the action (Copy Logs) in the group (Gather Logs and StateStore on Failure)
    with exit code 0  Action output: ... 扴捡杫潲湵⹤潬⁧潴尠停䭏偃䍓䵃卐㄰䍜彍潓牵散尤协屄潌獧䍜剏ⵐ䠳䑗塐就瑺獩瑥慢正牧畯摮氮杯潃祰湩⁧㩃坜义佄南䍜䵃䱜杯屳䵓呓䱓杯穜楴慴潴⹯潬⁧潴尠停䭏偃䍓䵃卐㄰䍜彍潓牵散�潌獧䍜剏ⵐ䠳䑗塐就潃祰湩⁧㩃坜义佄南䍜䵃䱜杯屳䵓呓䱓杯作䑓敓畴坰穩牡⹤潬⁧潴尠停䭏偃䍓䵃卐㄰䍜彍潓牵散尤协屄潌獧䍜剏ⵐ䠳䑗塐就协卄瑥灵楗慺摲氮杯潃祰湩⁧㩃坜义佄南停湡桴�潬⁧潴尠停䭏偃䍓䵃卐㄰䍜彍潓牵散尤协屄潌獧䍜剏ⵐ䠳䑗塐就慐瑮敨屲湕瑡整摮䍇潃祰湩⁧潬⁧㩃坜义佄南䍜䵃䱜杯屳䵓呓䱓杯䉜䑄氮杯挠湯整瑮⁳潴尠停䭏偃䍓䵃卐㄰䍜彍潓牵散尤协屄潌�Console
    > Successfully resized the shadow copy storage association Return code from command = 0 Cleaning up default wallpaper registry keys Process completed with exit code 0 zticopylogs processing completed successfully. Command line returned 0.
    Information Milestone POK 7/22/2014 4:13:07 PM MININT-P6E4T6G Task Sequence Engine 11134 The task sequence execution engine successfully completed the action (Move State Store) in the group (Gather Logs and StateStore on Failure)
    with exit code 0  Action output: [ smsswd.exe ] PackageID = '' BaseVar = '', ContinueOnError='' ProgramName = 'cscript.exe "C:\_SMSTaskSequence\WDPackage\scripts\ztimovestatestore.wsf"' SwdAction = '0001' Command line for extension .exe is "%1" %* Set
    command line: Run command lineWorking dir 'not set' Executing command line: Run command line Process completed with exit code 0 Microsoft (R) Windows Script Host Version 5.8 Copyright (C) Microsoft Corporation. All rights reserved.  Microsoft Deployment
    Toolkit version: 6.2.5019.0 The task sequencer log is located at C:\WINDOWS\CCM\Logs\SMSTSLog\SMSTS.LOG.  For task sequence failures, please consult this log. ztimovestatestore processing completed successfully. Command line returned 0.
    Information Milestone POK 7/22/2014 4:13:07 PM MININT-P6E4T6G Task Sequence Engine 11134 The task sequence execution engine successfully completed the action (Gather) in the group (Gather Logs and StateStore on Failure) with
    exit code 0  Action output: ... (BIOS is 'DELL   - 1072009'). Property IsVM is now = False Finished getting virtualization info Connection succeeded to MicrosoftVolumeEncryption There are no encrypted drives Property IsBDE is now = False Processing
    the  phase. Determining theINI file to use. Using COMMAND LINE ARG: Ini file = CustomSettings.ini Finished determining the INI file to use. Added new custom property MYCUSTOMPROPERTY Using from [Settings]: Rule Priority = DEFAULT ------ Processing the
    [DEFAULT] section ------Process completed with exit code 0 ------ Done processing CustomSettings.ini ------ Remapping variables. Property TaskSequenceID is now =  Property DeploymentType is now = NEWCOMPUTER Finished remapping variables. ZTIGather processing
    completed successfully. Command line returned 0 ReleaseSource() for C:\_SMSTaskSequence\Packages\POK0000F. reference count 1 for the source C:\_SMSTaskSequence\Packages\POK0000F before releasing Released the resolved source C:\_SMSTaskSequence\Packages\POK0000F.
    Information Milestone POK 7/22/2014 4:13:03 PM MININT-P6E4T6G Task Sequence Engine 11130 The task sequence execution engine skipped the action (Use Toolkit Package) in the group (Gather Logs and StateStore on Failure) because
    the condition was evaluated to be false.
    Information Milestone POK 7/22/2014 4:13:02 PM MININT-P6E4T6G Task Sequence Engine 11134 The task sequence execution engine successfully completed the action (Set Error Code) in the group (Gather Logs and StateStore on Failure)
    with exit code 0  Action output: Finished with error code 0.
    Information Milestone POK 7/22/2014 4:13:02 PM MININT-P6E4T6G Task Sequence Engine 11124 The task sequence execution engine started the group (Gather Logs and StateStore on Failure).
    Information Milestone POK 7/22/2014 4:13:02 PM MININT-P6E4T6G Task Sequence Engine 11122 The task sequence execution engine skipped the group (Cancelled Wizard Group) because the condition was evaluated to be false.
    Error Milestone POK 7/22/2014 4:13:02 PM MININT-P6E4T6G Task Sequence Engine 11135 The task sequence execution engine failed executing the action (Connect to State Store) in the group (State Restore) with the error code 1 
    Action output: ... ( 0x80070035 ) , trying to connect without username.  The network path was not found.  Unable to connect to
    \\3807000000100000000000:\2fa390ff58558b49c45bf204dfa5717f.  Sleeping for 15 seconds. Unable to connect to share: The network path was notfound. ( 0x80070035 ) , trying to
    connect without username.  The network path was not found.  Unable to connect to
    \\3807000000100000000000:\2fa390ff58558b49c45bf204dfa5717f.  Sleeping for 20 seconds. Unable to connect to share: The network path wasnot found. ( 0x80070035 ) , trying to
    connect without username.  The network path was not found.  Unable to connect to
    \\3807000000100000000000:\2fa390ff58558b49c45bf204dfa5717f.  Sleeping for 25 seconds. Process completed with exit code 1 ERROR - Unable to map a network drive to
    \\3807000000100000000000:\2fa390ff58558b49c45bf204dfa5717f. Unable to connect to 563807000000100000000000:\2fa390ff58558b49c45bf204dfa5717f ZTI ERROR - Non-zero return code by ZTIConnect,
    rc = 1 Command line returned 1. The operating system reported error 1: Incorrect function.
    Warning Milestone POK 7/22/2014 4:11:46 PM MININT-P6E4T6G Task Sequence Engine 11138 The task sequence execution engine ignored execution failure of the action (Request State Store) in the group (State Restore).
    Error Milestone POK 7/22/2014 4:11:46 PM MININT-P6E4T6G Task Sequence Engine 11135 The task sequence execution engine failed executing the action (Request State Store) in the group (State Restore) with the error code 16389 
    Action output: ... etting Media Certificate. Sending request to MP
    http://abcdefg.xyx.xyz.local. Setting message signatures. Setting the authenticator. CLibSMSMessageWinHttpTransport::Send: URL: abcdefg.xyx.xyz.local:80  CCM_POST /ccm_system/requestRequest was successful. migInfoRequestMessage.DoRequest (m_sResponse,true),
    HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\osdsmpclient\smpclient.cpp,1098) pClientRequestToMP->DoRequest(), HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\osdsmpclient\smpclient.cpp,2778) ExecuteRestoreRequestToMP(migInfoFromMP),
    HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\osdsmpclient\smpclient.cpp,2903) ExecuteRestoreRequest(), HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\osdsmpclient\main.cpp,84) OSDSMPClient finished: 0x00004005 reply from server
    is 'NoReply' ClientRequestToMP::DoRequest failed (0x80004005). ExecuteRestoreRequestToMP failed (0x80004005). ExecuteRestoreRequest failed (0x80004005).. The operating system reported error 1: Incorrect function.

  • FCP 7 Sequence Aspect Ratio Conflict Question

    Hello,
    I am working on a project that is DV/DVCPRO-NTSC, 29.97 fps, 720 x 480, Pixel aspect is NTSC-CCIR 601. I am trying to do two things with my project, one is to create a DVD for one to watch on the TV. The second is I am trying to create videos that I want to upload to youtube. I am having some issues with exporting for youtube which I am doing from FCP 7 and tried using compressor as well. The issue is that I am left with black bars on both sides of the video when I upload it at 720 x 480. When I add the tag yt:stretch=16:9 the bars go away but it looks like the top of my video is cut off as the persons head in the video shows from the nose down.
    Someone suggested that I should export it as 720x404 Squared pixels, and
    de-interlace it as well, in order for me to get rid of those black bars on both sides of the video that I am using on youtube.
    I tried this and uploaded the 720 x 404 video to youtube, and there were no more black bars but now it seems stretched. For example there is a person in the video dancing, so in the new 720 x 404 video he looks fatter. It is like those carnival mirrors that make you look short and fat is the best way I can describe it.
    Is there a way to have the video on youtube without black bars look the same as the video (720 x 480) with the black bars on the side? I am trying to upload a video on youtube that has no black bars and that is not stretched.
    I really appreciate any help I can get!
    Thank you,
    Brad

    Or you could scale up the video so it fills a 16:9 canvas, cropping the top and bottom, though this is not a very good solution for your image. You need to start shooting 16:9 if your delivery goal is going to be YouTube or pretty much anything these days.

  • OSD Task Sequence fails to install SCCM client

    Hello,
    Our OSD task sequence fails to install the SCCM client with certain images.
    The TS gets to the "Setup Windows and Configuration" step, during which it downloads all the necessary SCCM client files (silverlight, C++ redistributable, client.msi....etc.). At this point computer restarts and in never loads back into the
    task sequence, instead it enters the minisetup (setup is starting services, setup is installing devices, setup is applying system settings...preparing computer for first use), after which the computer restarts and you are back at the CTR+ALT+Del screen.
    The computer has joined the domain and has run all other steps but it has failed to install SCCM client. I can also see the leftovers of an incomplete TS under c:\_SMSTaskSequence
    If we change the image specified under "Apply Operating System" step, everything works ok.
    It appears there is something wrong with this particular image. Any ideas?
    Logs show no errors. Let me know which logs you'd like me to post (and from which location)
    There is no ccm folder under c:\windows

    Hoping you are using ConfigMgr 2012 R2. If a client machine Join to Domain and doesn't proceed with other steps and not installing the CCM client, then problem seems to be with the Image.Do you have any RunOnce registry setting specified in the Image? You
    can mount the Image and check those settings.
    RunOnce Key Reference :
    https://msdn.microsoft.com/en-us/library/windows/desktop/aa376977(v=vs.85).aspx
    If the above key is present in the Image, TS Engine won't resume after the reboot.
    You need to use a new variable "SMSTSPostAction" at the end of the Task Sequence, to add your custom actions.
    The above variable is applicable in CM 2012 SP1 and R2.
    Thanks, Senthil. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. Click on "vote as Helpful" if you feel this post helpful to you. This
    can be beneficial to other community members reading the thread.

  • OSD Task sequences failed in application installation step.

    Hello,
    I am deploying win 7 with installing app-v client application(by package), I applied this Task sequences on some of devices sometimes it worked and installed app-v client application but in some cases 
    Task sequences failed to installed app-v client steps. 
    Please provide reason for this and how to resolve this.

    Certain pre-requisites need to be installed for the App-V client to successfully install.
    Take a look here http://sccmentor.wordpress.com/2013/05/21/deploy-the-app-v-5-0-client-with-sccm-2012/
    Note that KB2533623 has been superseeded if you are pushing out any Windows Updates as part of your OSD.
    http://sccmentor.wordpress.com/2013/07/30/kb2533623-superseded-by-kb2758857/
    Have these pre-reqs been applied in the Task Sequence prior to the App-V client install? If not add them in and try the push again.
    Cheers
    Paul | sccmentor.wordpress.com

  • Setup windows and ConfigMgr task sequence failing.

    Hi,
    Am trying to create a reference Windows 7 task sequence and the task sequence is failing at the 'Setup Windows and ConfigMgr' task.
    There are a lot of threads regarding this step and in particular that as the machine is in a workgroup it cannot install the SCCM client successfully. As recommended on other posts have added SMSLP= and SMSMP= into the Installation properties.
    The task sequence is still failing and am unable to make much of the logs. 
    Will post the errors if anyone can assist?.

    <![LOG[Microsoft Deployment Toolkit version: 6.1.2373.0]LOG]!><time="09:48:18.771+00" date="12-02-2013" component="InstallSoftware" context="" type="1" thread="1104" file="runcommandline.cpp:34">
    <![LOG[The task sequencer log is located at X:\windows\TEMP\SMSTSLog\SMSTS.LOG.  For task sequence failures, please consult this log.]LOG]!><time="09:48:18.771+00" date="12-02-2013" component="InstallSoftware" context="" type="1" thread="1104"
    file="runcommandline.cpp:34">
    <![LOG[Unable to copy log to the network as no SLShare value was specified.]LOG]!><time="09:48:18.771+00" date="12-02-2013" component="InstallSoftware" context="" type="1" thread="1104" file="runcommandline.cpp:34">
    <![LOG[No system restore needed, WMI object not present.]LOG]!><time="09:48:18.771+00" date="12-02-2013" component="InstallSoftware" context="" type="1" thread="1104" file="runcommandline.cpp:34">
    <![LOG[Cleaning up default wallpaper registry keys]LOG]!><time="09:48:18.771+00" date="12-02-2013" component="InstallSoftware" context="" type="1" thread="1104" file="runcommandline.cpp:34">
    <![LOG[zticopylogs processing completed successfully.]LOG]!><time="09:48:18.771+00" date="12-02-2013" component="InstallSoftware" context="" type="1" thread="1104" file="runcommandline.cpp:34">
    <![LOG[Unable to create WebService class]LOG]!><time="09:48:18.771+00" date="12-02-2013" component="InstallSoftware" context="" type="1" thread="1104" file="runcommandline.cpp:34">
    <![LOG[Command line returned 0]LOG]!><time="09:48:18.771+00" date="12-02-2013" component="InstallSoftware" context="" type="1" thread="1104" file="runcommandline.cpp:565">
    <![LOG[Process completed with exit code 0]LOG]!><time="09:48:18.771+00" date="12-02-2013" component="TSManager" context="" type="1" thread="1048" file="commandline.cpp:1123">
    <![LOG[!--------------------------------------------------------------------------------------------!]LOG]!><time="09:48:18.771+00" date="12-02-2013" component="TSManager" context="" type="1" thread="1048" file="instruction.cxx:3012">
    <![LOG[Successfully completed the action (Copy Logs) with the exit win32 code 0]LOG]!><time="09:48:18.771+00" date="12-02-2013" component="TSManager" context="" type="1" thread="1048" file="instruction.cxx:3038">
    <![LOG[MP server http://UK5SYSDBPR01.s3ms.com. Ports 80,443. CRL=false.]LOG]!><time="09:48:18.771+00" date="12-02-2013" component="TSManager" context="" type="1" thread="1048" file="utils.cpp:5300">
    <![LOG[Setting authenticator]LOG]!><time="09:48:18.787+00" date="12-02-2013" component="TSManager" context="" type="1" thread="1048" file="utils.cpp:5322">
    <![LOG[Set authenticator in transport]LOG]!><time="09:48:18.787+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="libsmsmessaging.cpp:7751">
    <![LOG[Sending StatusMessage]LOG]!><time="09:48:18.787+00" date="12-02-2013" component="TSManager" context="" type="1" thread="1048" file="libsmsmessaging.cpp:4025">
    <![LOG[Setting message signatures.]LOG]!><time="09:48:18.803+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="libsmsmessaging.cpp:1297">
    <![LOG[Setting the authenticator.]LOG]!><time="09:48:18.803+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="libsmsmessaging.cpp:1327">
    <![LOG[CLibSMSMessageWinHttpTransport::Send: URL: UK5SYSDBPR01.s3ms.com:80  CCM_POST /ccm_system/request]LOG]!><time="09:48:18.803+00" date="12-02-2013" component="TSManager" context="" type="1" thread="1048" file="libsmsmessaging.cpp:8621">
    <![LOG[Request was succesful.]LOG]!><time="09:48:18.818+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="libsmsmessaging.cpp:8956">
    <![LOG[Set a global environment variable _SMSTSLastActionRetCode=0]LOG]!><time="09:48:18.818+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="executionenv.cxx:668">
    <![LOG[Set a global environment variable _SMSTSLastActionSucceeded=true]LOG]!><time="09:48:18.818+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="executionenv.cxx:668">
    <![LOG[Expand a string: %_SMSTSMDataPath%\Logs]LOG]!><time="09:48:18.818+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="executionenv.cxx:782">
    <![LOG[Clear local default environment]LOG]!><time="09:48:18.834+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="executionenv.cxx:807">
    <![LOG[Updated security on object C:\_SMSTaskSequence.]LOG]!><time="09:48:18.896+00" date="12-02-2013" component="TSManager" context="" type="1" thread="1048" file="utils.cpp:1121">
    <![LOG[Set a global environment variable _SMSTSNextInstructionPointer=140]LOG]!><time="09:48:18.896+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="executionenv.cxx:668">
    <![LOG[Set a TS execution environment variable _SMSTSNextInstructionPointer=140]LOG]!><time="09:48:18.896+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="executionenv.cxx:386">
    <![LOG[Set a global environment variable _SMSTSInstructionStackString=134]LOG]!><time="09:48:18.896+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="executionenv.cxx:668">
    <![LOG[Set a TS execution environment variable _SMSTSInstructionStackString=134]LOG]!><time="09:48:18.896+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="executionenv.cxx:414">
    <![LOG[Save the current environment block]LOG]!><time="09:48:18.896+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="executionenv.cxx:833">
    <![LOG[Successfully save execution state and environment to local hard disk]LOG]!><time="09:48:18.943+00" date="12-02-2013" component="TSManager" context="" type="1" thread="1048" file="engine.cxx:255">
    <![LOG[Start executing an instruction. Instruction name: Error in the task sequence. Instruction pointer: 140]LOG]!><time="09:48:18.959+00" date="12-02-2013" component="TSManager" context="" type="1" thread="1048" file="engine.cxx:117">
    <![LOG[Set a global environment variable _SMSTSCurrentActionName=Error in the task sequence]LOG]!><time="09:48:18.959+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="executionenv.cxx:668">
    <![LOG[Set a global environment variable _SMSTSNextInstructionPointer=140]LOG]!><time="09:48:18.959+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="executionenv.cxx:668">
    <![LOG[Set a local default variable SMSTSDisableWow64Redirection]LOG]!><time="09:48:18.959+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="executionenv.cxx:700">
    <![LOG[Set a local default variable _SMSTSRunCommandLineAsUser]LOG]!><time="09:48:18.959+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="executionenv.cxx:700">
    <![LOG[Set a global environment variable _SMSTSLogPath=X:\windows\TEMP\SMSTSLog]LOG]!><time="09:48:18.959+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="executionenv.cxx:668">
    <![LOG[Expand a string: smsswd.exe /run: cscript "%deployroot%\scripts\ztierrormsg.wsf"]LOG]!><time="09:48:18.959+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="executionenv.cxx:782">
    <![LOG[Expand a string: ]LOG]!><time="09:48:18.959+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="executionenv.cxx:782">
    <![LOG[Command line for extension .exe is "%1" %*]LOG]!><time="09:48:18.959+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="commandline.cpp:228">
    <![LOG[Set command line: smsswd.exe /run: cscript "%deployroot%\scripts\ztierrormsg.wsf"]LOG]!><time="09:48:18.959+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="commandline.cpp:731">
    <![LOG[Start executing the command line: smsswd.exe /run: cscript "%deployroot%\scripts\ztierrormsg.wsf"]LOG]!><time="09:48:18.959+00" date="12-02-2013" component="TSManager" context="" type="1" thread="1048" file="instruction.cxx:2930">
    <![LOG[!--------------------------------------------------------------------------------------------!]LOG]!><time="09:48:18.959+00" date="12-02-2013" component="TSManager" context="" type="1" thread="1048" file="instruction.cxx:2959">
    <![LOG[Expand a string: WinPEandFullOS]LOG]!><time="09:48:18.959+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="executionenv.cxx:782">
    <![LOG[Executing command line: smsswd.exe /run: cscript "%deployroot%\scripts\ztierrormsg.wsf"]LOG]!><time="09:48:18.959+00" date="12-02-2013" component="TSManager" context="" type="1" thread="1048" file="commandline.cpp:827">
    <![LOG[[ smsswd.exe ]]LOG]!><time="09:48:18.974+00" date="12-02-2013" component="InstallSoftware" context="" type="1" thread="2000" file="main.cpp:289">
    <![LOG[PackageID = '']LOG]!><time="09:48:18.974+00" date="12-02-2013" component="InstallSoftware" context="" type="1" thread="2000" file="main.cpp:318">
    <![LOG[BaseVar = '', ContinueOnError='']LOG]!><time="09:48:18.974+00" date="12-02-2013" component="InstallSoftware" context="" type="1" thread="2000" file="main.cpp:319">
    <![LOG[ProgramName = 'cscript "C:\_SMSTaskSequence\WDPackage\scripts\ztierrormsg.wsf"']LOG]!><time="09:48:18.974+00" date="12-02-2013" component="InstallSoftware" context="" type="1" thread="2000" file="main.cpp:320">
    <![LOG[SwdAction = '0001']LOG]!><time="09:48:18.974+00" date="12-02-2013" component="InstallSoftware" context="" type="1" thread="2000" file="main.cpp:321">
    <![LOG[Set command line: Run command line]LOG]!><time="09:48:18.974+00" date="12-02-2013" component="InstallSoftware" context="" type="0" thread="2000" file="commandline.cpp:731">
    <![LOG[Working dir 'not set']LOG]!><time="09:48:18.974+00" date="12-02-2013" component="InstallSoftware" context="" type="1" thread="2000" file="runcommandline.cpp:542">
    <![LOG[Executing command line: Run command line]LOG]!><time="09:48:18.974+00" date="12-02-2013" component="InstallSoftware" context="" type="1" thread="2000" file="commandline.cpp:827">
    <![LOG[Process completed with exit code 2147500037]LOG]!><time="09:48:19.037+00" date="12-02-2013" component="InstallSoftware" context="" type="1" thread="2000" file="commandline.cpp:1123">
    <![LOG[Microsoft (R) Windows Script Host Version 5.8]LOG]!><time="09:48:19.037+00" date="12-02-2013" component="InstallSoftware" context="" type="1" thread="2000" file="runcommandline.cpp:34">
    <![LOG[Copyright (C) Microsoft Corporation. All rights reserved.]LOG]!><time="09:48:19.037+00" date="12-02-2013" component="InstallSoftware" context="" type="1" thread="2000" file="runcommandline.cpp:34">
    <![LOG[]LOG]!><time="09:48:19.037+00" date="12-02-2013" component="InstallSoftware" context="" type="1" thread="2000" file="runcommandline.cpp:34">
    <![LOG[Microsoft Deployment Toolkit version: 6.1.2373.0]LOG]!><time="09:48:19.037+00" date="12-02-2013" component="InstallSoftware" context="" type="1" thread="2000" file="runcommandline.cpp:34">
    <![LOG[The task sequencer log is located at X:\windows\TEMP\SMSTSLog\SMSTS.LOG.  For task sequence failures, please consult this log.]LOG]!><time="09:48:19.037+00" date="12-02-2013" component="InstallSoftware" context="" type="1" thread="2000"
    file="runcommandline.cpp:34">
    <![LOG[ZTI deployment failed, Return Code = -2147467259  0x80004005]LOG]!><time="09:48:19.037+00" date="12-02-2013" component="InstallSoftware" context="" type="1" thread="2000" file="runcommandline.cpp:34">
    <![LOG[Unable to create WebService class]LOG]!><time="09:48:19.037+00" date="12-02-2013" component="InstallSoftware" context="" type="1" thread="2000" file="runcommandline.cpp:34">
    <![LOG[Command line returned 2147500037]LOG]!><time="09:48:19.037+00" date="12-02-2013" component="InstallSoftware" context="" type="1" thread="2000" file="runcommandline.cpp:565">
    <![LOG[Process completed with exit code 2147500037]LOG]!><time="09:48:19.037+00" date="12-02-2013" component="TSManager" context="" type="1" thread="1048" file="commandline.cpp:1123">
    <![LOG[!--------------------------------------------------------------------------------------------!]LOG]!><time="09:48:19.037+00" date="12-02-2013" component="TSManager" context="" type="1" thread="1048" file="instruction.cxx:3012">
    <![LOG[Failed to run the action: Error in the task sequence. 
    Unspecified error (Error: 80004005; Source: Windows)]LOG]!><time="09:48:19.037+00" date="12-02-2013" component="TSManager" context="" type="3" thread="1048" file="instruction.cxx:3103">
    <![LOG[MP server http://UK5SYSDBPR01.s3ms.com. Ports 80,443. CRL=false.]LOG]!><time="09:48:19.037+00" date="12-02-2013" component="TSManager" context="" type="1" thread="1048" file="utils.cpp:5300">
    <![LOG[Setting authenticator]LOG]!><time="09:48:19.052+00" date="12-02-2013" component="TSManager" context="" type="1" thread="1048" file="utils.cpp:5322">
    <![LOG[Set authenticator in transport]LOG]!><time="09:48:19.052+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="libsmsmessaging.cpp:7751">
    <![LOG[Sending StatusMessage]LOG]!><time="09:48:19.068+00" date="12-02-2013" component="TSManager" context="" type="1" thread="1048" file="libsmsmessaging.cpp:4025">
    <![LOG[Setting message signatures.]LOG]!><time="09:48:19.068+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="libsmsmessaging.cpp:1297">
    <![LOG[Setting the authenticator.]LOG]!><time="09:48:19.068+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="libsmsmessaging.cpp:1327">
    <![LOG[CLibSMSMessageWinHttpTransport::Send: URL: UK5SYSDBPR01.s3ms.com:80  CCM_POST /ccm_system/request]LOG]!><time="09:48:19.068+00" date="12-02-2013" component="TSManager" context="" type="1" thread="1048" file="libsmsmessaging.cpp:8621">
    <![LOG[Request was succesful.]LOG]!><time="09:48:19.083+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="libsmsmessaging.cpp:8956">
    <![LOG[Set a global environment variable _SMSTSLastActionRetCode=-2147467259]LOG]!><time="09:48:19.083+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="executionenv.cxx:668">
    <![LOG[Set a global environment variable _SMSTSLastActionSucceeded=false]LOG]!><time="09:48:19.083+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="executionenv.cxx:668">
    <![LOG[Clear local default environment]LOG]!><time="09:48:19.083+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="executionenv.cxx:807">
    <![LOG[Let the parent group (Gather Logs and StateStore on Failure) decides whether to continue execution]LOG]!><time="09:48:19.083+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="instruction.cxx:3212">
    <![LOG[The execution of the group (Gather Logs and StateStore on Failure) has failed and the execution has been aborted. An action failed.
    Operation aborted (Error: 80004004; Source: Windows)]LOG]!><time="09:48:19.083+00" date="12-02-2013" component="TSManager" context="" type="3" thread="1048" file="instruction.cxx:2425">
    <![LOG[Failed to run the last action: Error in the task sequence. Execution of task sequence failed.
    Unspecified error (Error: 80004005; Source: Windows)]LOG]!><time="09:48:19.083+00" date="12-02-2013" component="TSManager" context="" type="3" thread="1048" file="engine.cxx:214">
    <![LOG[MP server http://UK5SYSDBPR01.s3ms.com. Ports 80,443. CRL=false.]LOG]!><time="09:48:19.099+00" date="12-02-2013" component="TSManager" context="" type="1" thread="1048" file="utils.cpp:5300">
    <![LOG[Setting authenticator]LOG]!><time="09:48:19.099+00" date="12-02-2013" component="TSManager" context="" type="1" thread="1048" file="utils.cpp:5322">
    <![LOG[Set authenticator in transport]LOG]!><time="09:48:19.099+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="libsmsmessaging.cpp:7751">
    <![LOG[Sending StatusMessage]LOG]!><time="09:48:19.115+00" date="12-02-2013" component="TSManager" context="" type="1" thread="1048" file="libsmsmessaging.cpp:4025">
    <![LOG[Setting message signatures.]LOG]!><time="09:48:19.115+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="libsmsmessaging.cpp:1297">
    <![LOG[Setting the authenticator.]LOG]!><time="09:48:19.115+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="libsmsmessaging.cpp:1327">
    <![LOG[CLibSMSMessageWinHttpTransport::Send: URL: UK5SYSDBPR01.s3ms.com:80  CCM_POST /ccm_system/request]LOG]!><time="09:48:19.115+00" date="12-02-2013" component="TSManager" context="" type="1" thread="1048" file="libsmsmessaging.cpp:8621">
    <![LOG[Request was succesful.]LOG]!><time="09:48:19.146+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="libsmsmessaging.cpp:8956">
    <![LOG[Executing command line: X:\windows\system32\cmd.exe /k]LOG]!><time="09:48:26.618+00" date="12-02-2013" component="TSBootShell" context="" type="1" thread="744" file="bootshell.cpp:857">
    <![LOG[The command completed successfully.]LOG]!><time="09:48:26.618+00" date="12-02-2013" component="TSBootShell" context="" type="1" thread="744" file="bootshell.cpp:939">
    <![LOG[Successfully launched command shell.]LOG]!><time="09:48:26.618+00" date="12-02-2013" component="TSBootShell" context="" type="1" thread="744" file="bootshell.cpp:430">
    <![LOG[Execution::enExecutionFail != m_eExecutionResult, HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanager.cpp,866)]LOG]!><time="10:03:31.818+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048"
    file="tsmanager.cpp:866">
    <![LOG[Task Sequence Engine failed! Code: enExecutionFail]LOG]!><time="10:03:31.818+00" date="12-02-2013" component="TSManager" context="" type="3" thread="1048" file="tsmanager.cpp:866">
    <![LOG[****************************************************************************]LOG]!><time="10:03:31.818+00" date="12-02-2013" component="TSManager" context="" type="1" thread="1048" file="tsmanager.cpp:889">
    <![LOG[Task sequence execution failed with error code 80004005]LOG]!><time="10:03:31.818+00" date="12-02-2013" component="TSManager" context="" type="3" thread="1048" file="tsmanager.cpp:890">
    <![LOG[Cleaning Up.]LOG]!><time="10:03:31.818+00" date="12-02-2013" component="TSManager" context="" type="1" thread="1048" file="tsmanager.cpp:637">
    <![LOG[Removing Authenticator]LOG]!><time="10:03:31.818+00" date="12-02-2013" component="TSManager" context="" type="1" thread="1048" file="tsmanager.cpp:648">
    <![LOG[shKey.DeleteValue( c_szRegValue_SecurityToken ), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\ccmutillib\ccmutillib.cpp,1652)]LOG]!><time="10:03:31.818+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="ccmutillib.cpp:1652">
    <![LOG[Cleaning up task sequence folder]LOG]!><time="10:03:31.818+00" date="12-02-2013" component="TSManager" context="" type="1" thread="1048" file="utils.cpp:1746">
    <![LOG[Unable to delete file C:\_SMSTaskSequence\TSEnv.dat (0x80070005). Continuing.]LOG]!><time="10:03:32.692+00" date="12-02-2013" component="TSManager" context="" type="1" thread="1048" file="ccmfile.cpp:1056">
    <![LOG[hr, HRESULT=80070091 (e:\nts_sccm_release\sms\framework\core\ccmcore\ccmfile.cpp,1218)]LOG]!><time="10:03:32.863+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="ccmfile.cpp:1218">
    <![LOG[Failed to delete directory 'C:\_SMSTaskSequence']LOG]!><time="10:03:32.863+00" date="12-02-2013" component="TSManager" context="" type="2" thread="1048" file="ccmfile.cpp:1218">
    <![LOG[(dwRet = ::SetNamedSecurityInfoW ((WCHAR*) pszObjectName, objectType, OWNER_SECURITY_INFORMATION, pOwnerSID, NULL, NULL, NULL)) == ERROR_SUCCESS, HRESULT=80070005 (e:\nts_sccm_release\sms\framework\tscore\utils.cpp,6090)]LOG]!><time="10:03:32.863+00"
    date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="utils.cpp:6090">
    <![LOG[SetNamedSecurityInfo() failed.]LOG]!><time="10:03:32.863+00" date="12-02-2013" component="TSManager" context="" type="3" thread="1048" file="utils.cpp:6090">
    <![LOG[SetObjectOwner() failed. 0x80070005.]LOG]!><time="10:03:32.863+00" date="12-02-2013" component="TSManager" context="" type="3" thread="1048" file="utils.cpp:6102">
    <![LOG[SetObjectOwner (szFName, SE_FILE_OBJECT, c_szAdministrators), HRESULT=80070005 (e:\nts_sccm_release\sms\framework\tscore\utils.cpp,6187)]LOG]!><time="10:03:32.863+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048"
    file="utils.cpp:6187">
    <![LOG[RemoveFile() failed for C:\_SMSTaskSequence\TSEnv.dat. 0x80070005.]LOG]!><time="10:03:32.879+00" date="12-02-2013" component="TSManager" context="" type="3" thread="1048" file="utils.cpp:6231">
    <![LOG[RemoveDirectoryW failed (0x80070091) for C:\_SMSTaskSequence]LOG]!><time="10:03:32.879+00" date="12-02-2013" component="TSManager" context="" type="2" thread="1048" file="utils.cpp:6315">
    <![LOG[Deleting volume ID file C:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca ...]LOG]!><time="10:03:32.879+00" date="12-02-2013" component="TSManager" context="" type="1" thread="1048" file="resolvesource.cpp:519">
    <![LOG[DeleteFileW(sVolumeIDFile.c_str()), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,521)]LOG]!><time="10:03:32.879+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="resolvesource.cpp:521">
    <![LOG[Successfully unregistered Task Sequencing Environment COM Interface.]LOG]!><time="10:03:32.879+00" date="12-02-2013" component="TSManager" context="" type="1" thread="1048" file="environmentlib.cpp:886">
    <![LOG[Command line for extension .exe is "%1" %*]LOG]!><time="10:03:32.879+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="commandline.cpp:228">
    <![LOG[Set command line: "X:\sms\bin\x64\TsProgressUI.exe" /Unregister]LOG]!><time="10:03:32.879+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="commandline.cpp:731">
    <![LOG[Executing command line: "X:\sms\bin\x64\TsProgressUI.exe" /Unregister]LOG]!><time="10:03:32.879+00" date="12-02-2013" component="TSManager" context="" type="1" thread="1048" file="commandline.cpp:827">
    <![LOG[==========[ TsProgressUI started in process 1728 ]==========]LOG]!><time="10:03:32.879+00" date="12-02-2013" component="TsProgressUI" context="" type="1" thread="948" file="winmain.cpp:330">
    <![LOG[Command line: "X:\sms\bin\x64\TsProgressUI.exe" /Unregister]LOG]!><time="10:03:32.879+00" date="12-02-2013" component="TsProgressUI" context="" type="0" thread="948" file="winmain.cpp:332">
    <![LOG[Unregistering COM classes]LOG]!><time="10:03:32.879+00" date="12-02-2013" component="TsProgressUI" context="" type="1" thread="948" file="winmain.cpp:204">
    <![LOG[Unregistering class objects]LOG]!><time="10:03:32.879+00" date="12-02-2013" component="TsProgressUI" context="" type="1" thread="948" file="winmain.cpp:495">
    <![LOG[Shutdown complete.]LOG]!><time="10:03:32.879+00" date="12-02-2013" component="TsProgressUI" context="" type="1" thread="948" file="winmain.cpp:512">
    <![LOG[Process completed with exit code 0]LOG]!><time="10:03:32.894+00" date="12-02-2013" component="TSManager" context="" type="1" thread="1048" file="commandline.cpp:1123">
    <![LOG[Successfully unregistered TS Progress UI.]LOG]!><time="10:03:32.894+00" date="12-02-2013" component="TSManager" context="" type="1" thread="1048" file="utils.cpp:2320">
    <![LOG[g_TSManager.Run(), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanager.cpp,725)]LOG]!><time="10:03:32.894+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="tsmanager.cpp:725">
    <![LOG[::RegQueryValueExW(hSubKey, szReg, NULL, NULL, NULL, &dwSize), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\utils.cpp,261)]LOG]!><time="10:03:32.894+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048"
    file="utils.cpp:261">
    <![LOG[RegQueryValueExW failed for Software\Microsoft\SMS\Task Sequence, SMSTSEndProgram]LOG]!><time="10:03:32.894+00" date="12-02-2013" component="TSManager" context="" type="2" thread="1048" file="utils.cpp:261">
    <![LOG[GetTsRegValue() failed. 0x80070002.]LOG]!><time="10:03:32.894+00" date="12-02-2013" component="TSManager" context="" type="2" thread="1048" file="utils.cpp:279">
    <![LOG[End program: ]LOG]!><time="10:03:32.894+00" date="12-02-2013" component="TSManager" context="" type="1" thread="1048" file="tsmanager.cpp:764">
    <![LOG[Error Task Sequence Manager failed to execute task sequence. Code 0x80004005]LOG]!><time="10:03:32.894+00" date="12-02-2013" component="TSManager" context="" type="3" thread="1048" file="tsmanager.cpp:768">
    <![LOG[Sending error status message]LOG]!><time="10:03:32.894+00" date="12-02-2013" component="TSManager" context="" type="1" thread="1048" file="tsmanager.cpp:769">
    <![LOG[MP server http://UK5SYSDBPR01.s3ms.com. Ports 80,443. CRL=false.]LOG]!><time="10:03:32.894+00" date="12-02-2013" component="TSManager" context="" type="1" thread="1048" file="utils.cpp:5300">
    <![LOG[Setting authenticator]LOG]!><time="10:03:32.910+00" date="12-02-2013" component="TSManager" context="" type="1" thread="1048" file="utils.cpp:5322">
    <![LOG[Set authenticator in transport]LOG]!><time="10:03:32.910+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="libsmsmessaging.cpp:7751">
    <![LOG[Sending StatusMessage]LOG]!><time="10:03:32.941+00" date="12-02-2013" component="TSManager" context="" type="1" thread="1048" file="libsmsmessaging.cpp:4025">
    <![LOG[Setting message signatures.]LOG]!><time="10:03:32.941+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="libsmsmessaging.cpp:1297">
    <![LOG[Setting the authenticator.]LOG]!><time="10:03:32.941+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="libsmsmessaging.cpp:1327">
    <![LOG[CLibSMSMessageWinHttpTransport::Send: URL: UK5SYSDBPR01.s3ms.com:80  CCM_POST /ccm_system/request]LOG]!><time="10:03:32.941+00" date="12-02-2013" component="TSManager" context="" type="1" thread="1048" file="libsmsmessaging.cpp:8621">
    <![LOG[Request was succesful.]LOG]!><time="10:03:32.988+00" date="12-02-2013" component="TSManager" context="" type="0" thread="1048" file="libsmsmessaging.cpp:8956">
    <![LOG[Finalize logging request ignored from process 1044]LOG]!><time="10:03:32.988+00" date="12-02-2013" component="TSManager" context="" type="1" thread="1048" file="tslogging.cpp:1737">
    <![LOG[Process completed with exit code 2147500037]LOG]!><time="10:03:32.988+00" date="12-02-2013" component="TSMBootstrap" context="" type="1" thread="824" file="commandline.cpp:1123">
    <![LOG[Task Sequence Manager returned code 0x80004005]LOG]!><time="10:03:32.988+00" date="12-02-2013" component="TSMBootstrap" context="" type="1" thread="824" file="tsmediawizardcontrol.cpp:2136">
    <![LOG[ThreadToResolveAndExecuteTaskSequence returned code 0x00000000]LOG]!><time="10:03:33.004+00" date="12-02-2013" component="TSMBootstrap" context="" type="1" thread="988" file="tsmediaresolveprogresspage.cpp:221">
    <![LOG[ResolveProgressPage::OnWizardNext()]LOG]!><time="10:03:33.004+00" date="12-02-2013" component="TSMBootstrap" context="" type="0" thread="988" file="tsmediaresolveprogresspage.cpp:113">
    <![LOG[Activating Finish Page.]LOG]!><time="10:03:33.004+00" date="12-02-2013" component="TSMBootstrap" context="" type="0" thread="988" file="tsmediafinishpage.cpp:107">
    <![LOG[Exiting with return code 0x00000000]LOG]!><time="10:03:33.004+00" date="12-02-2013" component="TSMBootstrap" context="" type="1" thread="988" file="tsmbootstrap.cpp:1195">
    <![LOG[Execution complete.]LOG]!><time="10:03:33.019+00" date="12-02-2013" component="TSBootShell" context="" type="1" thread="756" file="bootshell.cpp:690">
    <![LOG[hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515)]LOG]!><time="10:03:33.019+00" date="12-02-2013" component="TSBootShell" context="" type="0" thread="756" file="environmentscope.cpp:515">
    <![LOG[m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337)]LOG]!><time="10:03:33.019+00" date="12-02-2013" component="TSBootShell" context="" type="0" thread="756" file="environmentlib.cpp:337">
    <![LOG[this->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,549)]LOG]!><time="10:03:33.019+00" date="12-02-2013" component="TSBootShell" context="" type="0" thread="756" file="environmentlib.cpp:549">
    <![LOG[::RegQueryValueExW(hSubKey, szReg, NULL, NULL, NULL, &dwSize), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\utils.cpp,261)]LOG]!><time="10:03:33.019+00" date="12-02-2013" component="TSBootShell" context="" type="0" thread="756"
    file="utils.cpp:261">
    <![LOG[RegQueryValueExW failed for Software\Microsoft\SMS\Task Sequence, SMSTSEndProgram]LOG]!><time="10:03:33.019+00" date="12-02-2013" component="TSBootShell" context="" type="2" thread="756" file="utils.cpp:261">
    <![LOG[GetTsRegValue() failed. 0x80070002.]LOG]!><time="10:03:33.019+00" date="12-02-2013" component="TSBootShell" context="" type="2" thread="756" file="utils.cpp:279">
    <![LOG[End program: ]LOG]!><time="10:03:33.019+00" date="12-02-2013" component="TSBootShell" context="" type="1" thread="756" file="bootshell.cpp:722">
    <![LOG[Finalizing logging from process 740]LOG]!><time="10:03:33.019+00" date="12-02-2013" component="TSBootShell" context="" type="1" thread="756" file="tslogging.cpp:1741">
    <![LOG[Finalizing logs to root of first available drive]LOG]!><time="10:03:33.019+00" date="12-02-2013" component="TSBootShell" context="" type="1" thread="756" file="tslogging.cpp:1583">
    <![LOG[Successfully finalized logs to C:\SMSTSLog]LOG]!><time="10:03:33.035+00" date="12-02-2013" component="TSBootShell" context="" type="1" thread="756" file="tslogging.cpp:1640">
    <![LOG[Cleaning up task sequencing logging configuration.]LOG]!><time="10:03:33.035+00" date="12-02-2013" component="TSBootShell" context="" type="0" thread="756" file="tslogging.cpp:584">

Maybe you are looking for

  • Remote App and Home sharing not working

    I've had no luck getting either the Remote app or Home Sharing working.  I've opened the correct ports, turned on sharing (both home sharing and under the Preferences -> Sharing tab), installed the newest version of iTunes, restarting the computer, i

  • Euro € symbol for embeded fonts

    Hi all, I'm trying to use the Euro sign in an application, to render some data in Labels formatted with a CurrencyFormatter for which I specify '€' as currencySymbol. The symbol is displayed when no style is used for the Label, but when I assign an s

  • HT204370 Can't locate movie! D:

    I bought a movie and I chose to download it later, and now that I'm ready to start downloading, I can't find it. Where do I go?

  • Manage models creation error

    Hi Experts, I'm trying to create a model connection in the SSM Administration, the error "Error Occured Trying to Connect; Login failed". How can we evaluate the problem. We use the same user id for fields PAS system logon and PAS user id. The said u

  • APEX_ITEM.TEXT disable question

    Hello guys and girls, I have a small problem with my sql statement (last section as you can see below). In the query I am trying to generate an html text element that is either diabled or enabled. For some reason, my text fields are all disabled alth