FCP 6 suddenly won't open.

Hi all,
After not using it for perhaps a month, I went to open up FCP today and when did so was prompted to enter my serial number. Although I thought it odd it went on to ask me to Register the software which I asked to do later. Afterwards FCP quit unexpectedly.
Since then FCP quits unexpectedly straight after attempting to load up. I don't even get the 'loading box' anymore.
Can anyone explain why a version of FCP that has worked faultlessly for 6 months + all of a sudden refuses to work?
The rest of the programs in the suite that were installed at the same time (LT, motion etc.) still all load ok. I can't think of anything else I have installed since that would conflict with it.
I'm trying to run it on a Powermac 2 x 2.66GHz with 7GB RAM with OS X 10.5.4 installed.
Any help would be appreciated.

As long as you have the project files and the media (or can recapture) you should be good to go once you get fcp working again. Worst case scenario, backup project files on external drive (i'm assuming your media is already on an external drive) and reinstall OS and apps on your startup drive.
Also, do a search here for deleting fcp preferences, there are a few utilities that will do it for you. There are preference files in several places and using one of these utilties insures that you get them all. Also, repair your disk preferences (applications:utilties:diskutility. Select your startup drive and repair permissions. If neither of these works, post back and we'll start some additional troubleshooting.
Message was edited by: Michael Grenadier

Similar Messages

FCE project suddenly won't open in FCE but it will open in FCP???

I've been working on a FCE 3.5 project for a couple weeks. Everyday I save the project under a differently dated name. I finished working on the file for this morning and saved it before closing. When I went to open it this afternoon, it suddenly won't open. Yesterday's file version of it will open though. I tried all different ways of opening todays version but it just won't open. So I tried to open it in FCP 5.1 and it opened up fine. I don't understand what could have happened to the file, that it won't open in FCE but it will open up in FCP? Any guesses.

Hi Fay,
Your method seems like a good one and as you say, makes it easy to spot any problems. I have a big family project involving many hours of kids video which I am editing. I have been filing everything under the one title, using "Save All" each time I finish the session, but in fact I can see the benefits of your method and will now start saving using the date.
Thanks again and good luck with tracking down your file.
Cheers,

FCP 5 Won't open at all

My FCP 5 won't open and i don't know how to remove the quicktime components. "/Library/QuickTime/"?
Can anyone help please.
CW

http://docs.info.apple.com/article.html?artnum=93385
Also, simply highlighting "trashing preferences" and going to google will quickly provide an answer.
Also there is a search function over there --------------------------->
Also, please click on the or buttons over posts as appropriate...

CS photoshop suddenly won't open after 5 years

CS photoshop suddenly won't open after running perfectly for 5 years. I do not have the original install disc.
Any suggestions? Apple and Adobe Tech folks could not help.

Cris (and Tai Lao)
there was no installation of a scanner (my Canon LiDe 500F scanner
has worked just fine for years) or camera driver (altho I had
recently downloaded some pix from my nikon onto iphoto) BUT— your
idea was brilliant!--disable Twain, which I did and ps launched
successfully!!
Now, as Tai Loa predicted, I can no longer import the scanner thru
ps. Given my current work crunch that's not so terrible, but how does
one access a scanner without using ps? If you have had just about
enough of me and want to pass on that question I'll understand.
I am ever so grateful to the two of you for making my ps usable
again, but it's midnight here in NYC and I have to pack up my tent
and look for your scanner question reply at the crack of dawn
tomorrow. It's been an exhausting anxiety-ridden day but I'm relieved
and grateful that there are bright people like both of you out there,
interested and willing to help. Many thanks.

Apps suddenly won't open. Anyone having this problem?

I have a new iphone 4. Has been great until today - my apps suddenly won't open. All built-in apps are fine. None of the apps I've added will open - they flash open for an instant, and close again. Software is up to date, there are no app updates. I have tried restarting apps, have restarted the phone, have removed and reinstalled a few apps - same problem, nothing working. Anyone know how to fix this?

Did you try to reset your phone by holding the sleep and home button until you see the Apple logo?
http://support.apple.com/kb/HT1430

System Preferences, Address book, and ical suddenly won't open

As I said My system Preferences, Address book, and ical suddenly won't open. This seemed to have happen all at once. The only unusual thing to happen lately is that my ipod was corrupted and I resored it last night. Now when I try to open these programs I get one or two bounces on the icon, then nothing. My other programs including itunes seem to work fine. There are no error messages at all.

/System/Library/Frameworks/Message.framework/Versions/B/Message (file is empty)OK, this is an important part of your basic system and will need to be restored.
First you should boot from your Install Disk and repair your disk: see Using Disk Utility and fsck to resolve startup issues or perform disk maintenance.
Then I think you would be wise to consider an Archive & Install. See Mac OS X : About the Archive and Install Feature. This should put back the missing file(s). You will also then need to re-apply the Mac OS X 10.3.9 Update (Combo), and anything else Software Update says is missing.
Post back and let us know how you get on!

Help! Numbers suddenly won't open. Shows error -1712. How can I fix?

Help! Numbers suddenly won't open. Shows error -1712. How can I fix?

Read this on error 1712: https://discussions.apple.com/message/20350274#20350274
Sounds like the app is having issues starting. Maybe choking on a file that didn't close correctly?
Suggest going to System Preferences, General, place a check next to "Close windows when quitting the application".
Then follow the direction in the link above. Namely, Force Quit that app and restart the computer.

I'm updating my iphone4 to ios7 then my phone suddenly won't open, it only appears the itunes logo. what does that mean?

i'm updating my iphone4 to ios7 then my phone suddenly won't open. it only appears the itunes logo. what does that mean?

It means your phone is in recovery mode and you will need to restore it:
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Cheers,
GB

Adober Reader suddenly won't open any PDF files (Mac)

I had an old version, I downloaded the latest one, upgraded to the newest, even tried taking that one out and downloading an older version. It doesn't matter which version I seem to have, it won't open any pdf files from the web.
I use a Mac, and Safari. It used to always load PDF files fine, one random place said I had to update it so I did and since then, lately it'd crash and close all Safari windows when loading a PDF or trying to copy something from a PDF. The smart Mac message I have says it could be related to an Adobe Plug in. However, now it won't even load PDF files at all, it always goes to a white page. Nothing happens.
What do I do?? I can't even save the PDF's as individual files and view then in Preview as an alternative option. It's a link online and normally would work. What happened??
HELP!
I have a Mac OS X Version 10.5.8
I've always used Safari, it's Version 5.0.5 (5533.21.1 if that means anything).
Acrobat Reader, currently an old version 9.4.0 download. BUT, I had also the 10.0.1 version which also doesn't work. When I had that 10.0.1 version and checked for updates, there was an update (.3 I think?) and I did that and that also doesn't work!
Why did it suddenly stop working?
What can I do to fix it ASAP?
Only with 9.4.0 version I can go to Help and "Repair Adobe Reader Installation" - I click that and the only box I can select is "Adobe PDFViewer Safari Plugin - View, fill-in and collaborate on Adobe PDFs within Safari" - I click continue and it tells me there's "No missing components detected. Repairs are not needed." The only option is to click "OK".
With any newer version of Adobe Reader, under Help there is no option to "Repair Adobe Reader Installation". So... I can't even try that with a new version.
I am at a loss for solutions. Hope someone here can help! Thanks!

There are several things you can do. My first step would be to repair permissions. If that doesn't work log on as a different user. If all works properly then you have a corrupt preference file (most likely) or a corrupt user font installed in your user Library (less likely). If that doesn't work download Applejack. Have it repair the disk, remove all system caches and user caches. Then have it check all system and user preference files. Remove any preference files that are corrupt. Reboot and see if your system is working properly.

FCP 6 won't open

I just reinstalled FCP Studio 2 and FCP 6, compressor, Motion or Soundtrack Pro will open. DVD Studio Pro, Live Type and Cinema Tools will. Yes I trashed the preferences and added the updates?

Try a google for repairing pre-bindings. It is a terminal command.
If, as you say, it won't open AT ALL -- no app starting what so ever... it could be a permissions or prebinding issue.
But now, as I type -- I'm wondering if maybe (MAYBE???) FCP is opening in another desktop scene... hit F13 and see if it isn't opening somewhere else. But your profile says you are still on Tiger - so that's not it...
Fixing pre-bindings will tie together all the system requirememnts. Sometimes (though not often) they get wonky.
CaptM

FCP HD won't open!

I can't open my FCP HD for some reason. I've tried reinstalling the program and it still won't open. When I click on the icon in the dock or in the finder it acts as if it's trying to open but then it shuts off. Has this ever happen to anyone. And how'd you resolve it?????
G4 Mac OS X (10.4.4)

Shane's Stock Tip Mantra: If the program was working fine, and now isn't, or just isn't working the way it should, the first things to do are:
1) Trash your FCP preferences. Download the appropriate version of FCP Rescue at http://www.pistolerapost2.com/fcprescue and run it.
2) Open the Disk Utility and Repair Permissions.
3) (optional) Do the Hokey Pokey and turn your self about. Results may vary.
Shane

Aperture library suddenly won't open

OK, I've been putting off updating to the latest version of Aperture (3.4.3) because I had a sort of premonition about something bad happening to my library. But I finally got around to doing the upgrade, having felt this version had been around long enough to be stable. Big mistake. It worked OK initially, but suddenly today won't open my library, no matter what I do.
When I launch Aperture, it opens a little window with a spinning marker in it and the message "Opening Aperture Library". This is normal prior to the main window opening, but usually I see it for no more than a second or so. Now, it's all I see; the main window never appears.
Oddly, Apertur's menu structure seems to work OK while this 'loading' window is open. I can, for example, open the Activity window. However, it contains no useful information to say what's going on; the entries are just blank in this window. Also, I can quit Aperture normally (whereupon it says 'updating previews' as usual).
I've tried all three of the database-reparing options that Aperture offers if you hold down Option-Command when starting: repair permissions, repair database, rebuild database. In all three cases, it goes through the repair process and then just reverts to showing the little 'opening library' window and nothing has improved.
The upgrade to version 3.4.3 apparently went OK the other day, and I've opened and quit the software a few times since I upgraded it, and I thought everything was fine. The one thing that wasn't quite right (and I wonder if this has somethnig to do with my problem now) was Photo Stream. It didn't seem to be working properly. If I clicked the Photo Stream entry in the list at the left of the window, what I saw was just the 'welcome' message with buttons below it to sign in or turn off the service ("No, thanks" button). I didn't see any actual Photo Stream content. In this window, however, it *did* say that I was signed in with my usual Apple ID, so it wasn't very clear to me whether it was OK or not.
There's a photo I took on my iPhone which I was expecting Aperture 3.4.3 to download from Photo Stream, but it never did. I.e. just one shot that failed to download; all the previous ones had been downloaded by my previous version of Aperture. I couldn't see why the missing picture was failing to download, so I tried turning Photo Stream off and on again from within Aperture. I'm really not sure whether this worked or not; there didn't seem to be any meaningful feedback from the software.
Anyway, after having tried to launch Aperture today (and failed), I checked System Preferences and found that Photo Stream was turned off. So I turned it on again. Unfortunately it makes no difference: Aperture still won't load its library at all now.
I have tried all of following:
1. Rebooting my Mac
2. Verifying the disk contaning my Aperture library (it was fine)
3. All three of Aperture's database-repair options
4. Turning Photo Stream on in System Preferences
...and nothing makes any difference. Aperture simply will not open my library but just sits there, twiddling its spinner.
NB My library still appears to be OK, in that I can access its contents from other software successfully using the media browser.
What I haven't yet attempted is to create a blank new library and import my existing library into it. Failing any better ideas I'll try that next, but it's going to be a big operation that will take a lot of time and disk space, so I'd like to see if there are any better things to try first.
I must say I'm very disappointed that Aperture can apparently break so easily. I haven't lost any actual pictures because I'm paranoid and keep a separate copy of all my shots just in the Finder, external to any management software. But I've lost access to lots of photo books I've created over the years and various other resources, not to mention all the editing work I've done on thousands of shots within Aperture (which I haven't retained separately).
This is supposed to be professional level software. How can it seriously (a) break this easily and (b) not be able to retrieve itself via its database repair options?I'm very disappointed.

Thanks for that very helpful reply. I've followed your instructions and done some further digging too.
To answer your three points, first of all:
1. No, I haven't imported any images since upgrading my Aperture library for version 4.3.4; I did move photos between projects a couple of times, but mostly I just checked that everything appeared OK after the upgrade and tried to work out why PhotoStream didn't seem to be working properly.
2. I've attempted to create a new Aperture library. This didn't work! A library gets created on disk, but attempting to open it produces the same endless spinner as the main library.
3. I switched to a spare user account (a blank one called 'test', just as the system created it) and tried to launch Aperture and create a new library there. Same result: library is created but won't load in.
This is very strange, because I'm not aware of having changed anything substantial on my system recently. No new software that installed anything as a login item, system service or background process etc. that I'm aware of. (I'm actually quite wary of such software, and don't have much of it on my system.) The only substantial thing that I know has changed since I last successfully launched Aperture is the year, to 2013! And I hardly think that's the cause...!
I'm wondering if Aperture itself has become corrupted somehow, and whether I should trash it and reinstall it. But that's rather a pain because I've got the DVD version, not the one from the Mac App Store. Besides, I'm not sure what remnants it leaves on the system (sandbox files etc.).
I've verified my startup disk, on which Aperture resides, and repaired permissions, and no error was reported (nor did many permissions need to be fixed).
Now, the only other possible explanation I can come up with is that startup is being prevented by a misbehaving PhotoStream process, as I've just discovered that I'm having endless crashes from PhotoStreamAgent, as reported in Console. I'm getting the same series of messages popping up every few seconds:
01/01/2013 21:58:51.649 xpcd[4676]: PhotoStreamAgent[5540]: registration request failed: (0x11, 0x0) The file “com.apple.iLifeAssetManagement.agent.plist” couldn’t be saved in the folder “Preferences” because a file with the same name already exists.
01/01/2013 21:58:52.431 com.apple.launchd.peruser.501[473]: (com.apple.photostream-agent[5540]) Job appears to have crashed: Illegal instruction: 4
01/01/2013 21:58:52.431 com.apple.launchd.peruser.501[473]: (com.apple.photostream-agent) Throttling respawn: Will start in 10 seconds
01/01/2013 21:58:52.615 ReportCrash[5531]: Saved crash report for PhotoStreamAgent[5540] version 2.7 (40.34) to /Users/rghallas/Library/Logs/DiagnosticReports/PhotoStreamAgent_2013-01-01-2158 52_Richard-Hallass-Mac-Pro.crash
01/01/2013 21:58:52.620 ReportCrash[5531]: Removing excessive log: file://localhost/Users/rghallas/Library/Logs/DiagnosticReports/PhotoStreamAgent _2013-01-01-215516_Richard-Hallass-Mac-Pro.crash
This is just repeating every 10 seconds, as suggested by the 'Will start in 10 seconds' message. Starts; crashes; loop.
Now, I've searched for a file called "com.apple.iLifeAssetManagement.agent.plist" and have found three instances: one each in the following places:
Aperture:
/Users/rghallas/Library/Containers/com.apple.Aperture/Data/Library/Preferences/c om.apple.iLifeAssetManagement.agent.plist
PhotoStream Agent:
/Users/rghallas/Library/Containers/com.apple.photostream-agent/Data/Library/Pref erences/com.apple.iLifeAssetManagement.agent.plist
iPhoto:
/Users/rghallas/Library/Containers/com.apple.iPhoto/Data/Library/Preferences/com .apple.iLifeAssetManagement.agent.plist
In all three cases, the file appears to be an alias that points to itself (i.e. original path is the same as the alias's path in each case). That seems weird but I hope it's right, given that it applies to all three (and the files alongside these plists in the folders in which they reside).
Anyway, the logs unfortunately don't make it clear exactly *which* Preferences folder is being referred to, and hence which com.apple.iLifeAssetManagement.agent.plist file is causing a problem. I imagine it's the one associated with PhotoStream Agent, since it's the Agent that's producing the ongoing crash reports. But either way I don't know what to do about it. I suppose I could try trashing this particular plist file, but I'm reluctant to do so as I don't want to break anything further.
NB Aperture itself doesn't appear to output any log messages to say what's happening while it's failing to load its library.

IPhoto 9.4.3 suddenly won't open unless it's updated

My iPhoto version shows in the Application folder as 9.4.3. I try to open it and get rerouted to the App Store to update it. When I try to update it I get a dialogue box that reads:
"This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."
The App Store shows an update is ready, but won't let me update. I tried to repurchase and the App Store won't resell it to me, only gives me the option of an update because I already have it installed. Then it won't update because it says I haven't yet bought it.
So far as I know, no other user bought it nor was it refunded or cancelled. It always opened until suddenly it didn't anymore.
What might have happened to the original iPhoto 9.4.3, and how would I get out of this loop where iPhoto won't open unless it's updated, the App Store has an update ready to install and won't let me have it or repurchase it?
I'd be grateful for any ideas that will stop this confusing cycle.
thanks.

Try the following:
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - Run Option #4, Rebuild Database.
OT

Illustrator CS6 suddenly won't open multi page PDF.

I've been working on a PDF project for a few weeks now and it's been working perfectly. However yesterday, I was suddenly unable to open the PDF as a whole and instead, I was prompted to select a specific page to open. The strange thing is that other PDF files that I've been working with will still open with multiple artboards but this file won't. Does any one know what's casuing this?
Any help or suggestions would be greatly appreciated. Thanks in advance!!

If you check the option "Preserve Illustrator editability" in the PDF dialogbox, the PDF will contain the complete Ai file. If you don't (e.g. by selecting "smallest file size") then it won't contain the native AI data. Then you will see what you see.
Unfortunately, if you don't have a backup, you cannot get the native data back.

Recovered FCP projects won't open.

I've recently used Stellar Phoenix to recover data from my hard drive, which was successful, but now the FCP project files won't open, even if i force FCP to read it. It just gives me "Error: Wrong file type".
The files that wont work are Final Cut Pro files. Files that do work are Pro Tools
Other files that were recovered work ok (.mov quicktime files).
I've seen threads on other forums of people who have had the same problem, it wasnt resolved. Has anyone here had/heard of this problem?
Thanks

Ok, so we have the final cut pro project file open now. The file type changer did work in the end..but now we have a different problem.
All the media files that FCP wants to link to are there, but it will only find about 30% of them. The rest are "Media Offline". I've tried going through "reconnect media" and finding the files manually, but FCP just won't load them. It doesn't even give me an error message, it just doesn't do anything when i select the files and click ok. I also have to change it to see All Files rather than just audio or video. But..When I find the files in finder, I can append the video files with .mov, and they run fine in quicktime, and i can do the same with the audio files... Also, the file Type and Creator tags are the same on videos that FCP can read and the ones it can't read.Any thoughts? I have tried everything i can think of.
Thanks again!

ITunes suddenly won't open on Windows 8

Hi, I've been running iTunes 10.7 on Windows 8 just fine for the past couple months... never had any problems with it at all, until today. Suddenly it won't open. The process shows up in my task manager, but the program will never actually open.
I tried everything- uninstalled QuickTime and iTunes, downloaded and installed the newest version of iTunes 11, tried it in both Windows 7 and Windows XP compatibility mode, ran as administrator, and everything else I could rustle up on the internet. Still does the exact same thing.
Has anyone else had this problem? It's been very frustrating today and any help I can get would be very appreciated. Thanks!

This worked for me although i'm not sure if it will work for you. Go to task manager (right click on the taskbar then click "Task Manager") and find all processes related to iTunes or just Apple software in general. Hit "End Task" to each of them then open them up again using whatever shortcuts you have set up. If this doesn't work, then I don't know what to tell you.

FCP 6 suddenly won't open.

Similar Messages

Maybe you are looking for