FCP 7.0.2 and DSR-11...are they together alright?

My FCP does not able to recognize DSR-11. I think that it was working until today. I even change firewire cable and still not work. I test DSR-11 with my other computer that has FCP 6.0.6. Any idea?

The newer MacPros lack FW400. Mine doesn't...I have that option. I guess that's why it still works? I've heard sketchy things about FW400-FW800 converters and capturing via firewire.
Shane

Similar Messages

How can I create a slideshow that depicts only a version of a photo rather than the original? Since the original and new versions are saved together, the aperture slideshow often choices the original rather than the desired version to display/

How can I create a slideshow that depicts only a version of a photo rather than the original? Since the original and new versions are saved together, the aperture slideshow often choices the original rather than the desired version to display.

There are two things we use the name "Slideshow" for in Aperture: a Slideshow Album, used for making Slideshows, and the Slideshow that is made. (Imho, it is a design mistake to not call the containers used to create Slideshows, Books, etc., "Albums".)
The Slideshow will use the Album Pick from any Stack. A good way to use Aperture is to promote the Image you want to regularly use (such as, for example, a Version with adjustments) to the top of the Stack. This makes it the Stack Pick, and will be the default Album Pick. If you haven't done that, you can still change the Album Pick for any Stack in a Slideshow Album. Expand your Stack(s), select the Image in each Stack that you want to be the Album Pick (and thus shown in the Slideshow), and "Stacks➞Set Album Pick". (Note the keyboard shortcut; there is also a Toolbar icon for this.) The change is immediate. The Slideshow will always show the Album Pick (or, if there is not one, the Stack Pick) for every Stack in your Slideshow Album.

What are ROWID and ROWNUM? Are they stored in database and where?

Hi All,
can anybody please answer this question
What are ROWID and ROWNUM? Are they stored in database and where?
Thanks,
Srini

ROWID can be thought of as a pointer to the physical location (on disk) of the (table) row.
From a ROWID value, Oracle can extract the file, block-within-that-file and offset-of-the-row-within-that-block. Using these, Oracle can directly access a disk block to retrieve a row.
ROWNUM is a just sequence number of a row within a result set of a query.
As said by other repliers, both are not stored. They are 'constructed' when you reference them inside a query.

Yosemite 10.10.2 server app. FTP help. I have a program running in my local server enviroment that wants to FTP to my mac folder. It asks for the server , name, password, port and path. what are they?

So I have set up a localhost area in my Mac. I have the new server.app and I am running yosemite 10.10.2 .
I have a program running in my local server enviroment that wants to FTP to my mac .
It asks for the server , name, password, port and path. what are they?
I am pretty certain that the Serveris "localhost",
Name is my macs name (like my-mac-min)
password is "my login password"
and they suggest port 21.
But what is the file path, lets just say my site is set up http://localhost/siteftp and is actually at my Users/Sites/siteftp folder.
Why cant this program connect to the mac.
Is it because they are both operating in the same localhost enviroment,
could it be my folder permissions are not correct on siteftp folder?
Help please !

I tried turning the computer off and then back on. The alerts don't show the notice to update as resolved. Hopefully this is not a problem or an indicator or another problem. Should I ignore or reload 10.10.1 from the app store to trigger a resolved check in a green circle?
Interesting that I had to buy server software after my free Yosemite download. I would have hoped that the two pieces of software would have gone together without any complication. It is not positive to end up buying a problem. Ah well, time to move on.

Service Contract and Service Quote, Are they two different application or s

Service Contract and Service Quote, Are they two different application or same application ?
What is the difference ?
thanks
siva

Siva
There is no application called Service Quote (But we can have services in the quoting lines).
Thanks
Nagamohan

I have an iMac, where are the completed print jobs stored on the iMac and what format are they?

I have an iMac, where are the completed print jobs stored on the iMac and what format are they?
My OSX is 10.10.1

Hi
If you are using standard system or HP drivers, than the jobs contents are not saved at all.
You can see the list of completed jobs per printer via this URL: http://127.0.0.1:631/printers/
If you want to save a print job, you can do it in the print dialog, by selecting an action prom "PDF" popup.
It allows to save a job (prior or instead to printing it) as PDF or PostScript.

Itunes show duplicate, 1 with icloud and 1 without. are they both on hard drive?

itunes shows duplicates - 2 with icloud and 1 without.
are they both on hard drive?
which ones should i delete?

iTunes Store: Transferring purchases from your iOS device or iPod to a computer
The should then show in your iTunes library. They are not anywhere else.

My part for Lenovos PCs and Windows 7 are better together :) S-Series

Hi ,
my part for Lenovos PCs and Windows 7 are better together
Feel free to look at this...If you have one of the small Lenovo machines
or want to buy one in the future u are not alone
Windows 7 Driver
sincerely KalvinKlein
Want more ? For further information to get the most of your S-Class machine
Lenovo Energymanagement
Backup
Windows 7 Driver
Windows 7 Install
Clean XP Install
XP Startup
Small WebCam Guide
Lenovo Easy Capture
Resolution > 1024 x 576 / 600 Works with XP Only For Windows 7 Alternate driver section
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Hi ,
my part for Lenovos PCs and Windows 7 are better together
Feel free to look at this...If you have one of the small Lenovo machines
or want to buy one in the future u are not alone
Windows 7 Driver
sincerely KalvinKlein
Want more ? For further information to get the most of your S-Class machine
Lenovo Energymanagement
Backup
Windows 7 Driver
Windows 7 Install
Clean XP Install
XP Startup
Small WebCam Guide
Lenovo Easy Capture
Resolution > 1024 x 576 / 600 Works with XP Only For Windows 7 Alternate driver section
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

FCP 7 (FCS 3) and AVID media Composer 6 together?

Is anyone using FCP 7 (Final Cut Studio 3 and all related software) and AVID media Composer 6 together on the same operating system?
If so which one are you using - Snow Leopard or Lion and are there any Issues with either?
Cheers

I bought MC 5.5 last summer, and upgraded to 6 when it came out. I have FCP 7 and family installed on the same system as well as CS5. All work great. I have this setup on a 2011 13" MBP running Lion. It works great. I like having all three on the same system, it really gives me a lot of flexibility. And I also have the same setup on a 2010 iMac 27, only this one has Snow Leopard and MC 5.5. I'm getting ready to switch it to MC 6, and take the MBP back to Snow Leopard though, it's just been sluggish since the upgrade. Other than that, I've had no problems with FCP and Avid living in the same house, if fact it's just been plain handy.

Jumper SW1 and SW2, where are they?

I have a 2100+, and my KT4 Ultra is only recognizing it as a 1500+. I know it is because the FSB is set to 100, but when I try to change it to 133, my computer dies hard, and I have to clear the CMOS and start over. But printed on the MB is a table that says I have to set Jumper SW1 and SW2 to 1-2 in order to change the FSB successfully. But I couyld not find any jumpers anywhere on the board that weren't audio or the clearing CMOS one. Where are they? Is there some other solution to my problem?
Help!!! I have been looking for a relavent answer to this question for the last two weeks. (and yes, my power supply is fine...)

I am experiencing the same problem. I have an Athlon XP 2600+ barton (333mhz), and every time I try to clock the CPU at the factory speed, it will shut down.
I also noticed the FSB jumpers on the motherboard, and did some experimenting with the jumper settings on 1-2 and 2-3 for a 166MHZ fsb. After I set this and change the fsb in the bios to 166mhz and a multiplier of 10-15 it reports clocks speeds from 850mhz-933mhz?!
My question is for the KT4 ultra does the fsb have to be set through jumpers and bios, or just bios?
-kid

Flash ActiveX and NPAPI - what are they?

I see two things in Control Panel/Add Remove Programs
Adobe Flash Player 16 ActiveX
Adobe Flash Player 16 NPAPI
I don't use special software or anything, I just have Google chrome, IE and firefox... do I need these two software, and what are they please?
I ask since recently I had bsod and want to see the cause. Also firefox crashes.
Thanks

Flash Player for NPAPI is Flash Player for Firefox
Flash Player for ActiveX is Flash Player for Internet Explorer
Flash Player for Chrome is built directly into the browser, so there's nothing separate to install or download.

In PS6 Navigator and Layers windows are locked together. How do I unlock them?

Whenever I open the Navigator and Layers windows in PS6, they are locked together side by side.
Does anyone know how to unlock them. This doesn't happen when I open any other windows.
I'm using a PC.

Is that photoshop 6 or photoshop cs6?
Generally one can just separate them by dragging the name of the panel.
(i.e. drag on the Navigator name)
In photoshop cs6 you can reset the workspace by going to Window>Workspace or if you have a custom arrangement of your panels, you
should get everything as you want it and then save your own named workspace, so you can reset it whenever things going awry.

Intel HAXM and Hyper-V are they mutually exclusive?

Hi all, if you have Intel virtualization turned on and HAXM installed it appears that Hyper-V won't install. And, if you have Hyper-V installed you cannot install HAXM as it says that virtualization is turned off or is not present.
http://stackoverflow.com/questions/13285682/android-sdks-intel-haxm-disabled-after-installing-hyper-v
Is Microsoft aware of this and if so do they care? I know that developing for WP8 is great. But I also like to develop on android.
Thanks, -ja

>Is it possible to get an Android Virtual Device to run on Hyper-V?
I don't do Android development, but if there's one that runs on an intel
x86 processor, then maybe.
>Can I get Windows phone emulator to run on Genymotion/VirtualBox?
I believe so, googling windows phone emulator and virtualbox, you get a
number of how-tos. I haven't tried to do it personally though.
>Or if I have HAXM running on another machine on the network with WP Emulator/Hyper-V running on my main dev box can I remote into the networked Emulator?
I don't know HAXM at all, you'd have to ask the developers of it, but I
know you can do it the other way around. Access a Windows Phone emulator
running on a machine with Hyper-V. It's a bit tricky to set up but it
works. Not sure Visual Studio could use it directly though.
Bob Comer

Session timeout and session.invalidate() -- are they the same?

I was just wondering when a session timeout occurs (either by setting the session-timeout in web.xml or the server's default timeout), is the session automatically invalidated? Or should we call setMaxInactiveInterval() instead? Or is calling session.invalidate() the only way to invalidate a session?

Hello all,
Both are same in terms of functionality, but if you use both of them like
1: You specified the tag sessionTimeout and
2: in your program the session.maxInactiveIntervalTime( value ) here if the value is(we gave it in terms of seconds like for 40 minutes we give 2400) then the program code will override the value previously set in web.xml
Thanks
Prabhakar

Vista and Solaris 10, are they compatible?

I have attempted to follow dual boot guides found everywhere, but none tailor specifically to (or eve mention) Vista. This is a problem, because Vista does not use the same method of boot as previous versions of NT.
So far, in my many failed attempts at creating a Vista dual boot, I have experienced this:
When I install Solaris 10 on any partition (Solaris installs correctly and works great), and then attempt to install Windows Vista, Vista says all of my partitions do not meet its requirements for installation (that the drive is NTFS and at least 12 GB is all it tells me). Even after formatting, deleting, recreating, and reformatting a drive, the drive is still unusable. Only after deleting ALL drives, including Solaris 10, and recreating and brand new first partition does Vista allow me to install. If I create a partition that Vista allows me to use, and also a partition to use with Solaris, and THEN install Solaris, the partition that Vista liked can no longer be used!
When I install Windows Vista first (and it works fine) (which is what I tried first and reasoned is what I should be doing), and then install Solaris 10 on a partition (it installs correctlt and works great), I load up my computer and go into the GRUB bootloader. I can select Windows. However, when attempting to load windows, I get an error (in the Vista font by the way) that says my operating system cannot be loaded. When I load my Vista install disc, it cannot find any installations of windows, and it cannot repair the master boot record, saying something like the filesystem is corrupt. However, just as an experiment, I loaded Vista onto the former Solaris drive, and looked at my first partition. Every file was there, intact.
I have attempted this with Windows Home Premium 32 bit, Windows Business 32 bit, and Vista Ultimate x64. I don't want to believe that it's impossible to load Vista and Solaris simultaneously, I've seen as much stating its impossibility as I've seen documents telling me how to do it (<- cold irony).
As long as I can get AN INSTALLATION of Solaris 10 on my machine at the same time I have Vista able to boot, I'm fine, but I seem to have lost on all fronts.
Edited by: ZetaZeta on Sep 19, 2007 12:30 AM

In Solaris Express, this is not an issue, according to this weblog:
http://blogs.sun.com/moinakg/entry/solaris_vista_dual_boot_conclusion
For versions of Solaris Express prior to buid 70, this method was described for creating a dual-boot with the oh-too-picky Windows Vista:
http://linux.wordpress.com/2007/02/17/vista-and-solaris-express-dual-boot/
I am going to assume that setting up a dual-boot with Solaris 10 is similar to, if not the same as, Solaris Express, since the only steps specific to Solaris are the files I copy from Solaris.
I hope this helps anyone else with a problem similar to mine.

FCP 7.0.2 and DSR-11...are they together alright?

Similar Messages

Maybe you are looking for