FCP 7.0.3 doesn´t render in Lion

Everytime I start a new project with just two little clips and try to render it, FCP tells me there is not enough Ram available. But I have 24GB.

Does the error message actually state that it is "RAM" or does it use the term "Memory"?
If the message refers to lack of memory, it could be referring to lack of hard drive space on the boot drive.  The system uses free space for temp and swap files.  All drives should have at least 15% free space available at all times.
-DH

Similar Messages

  • I purchased my fcp but it's doesn't open all I have is the FCp quit unexpectedly what can I do to fix this

    I  purchased my fcp but it's doesn't open all I have is the FCp quit unexpectedly what can I do to fix this

    yes...a future release...for all of us pro editors here
    on a side note - DH, i don't know you personally, but you've been a wealth of information over the years. I'll miss you when Apple finally kills off Final Cut PRO for good. Thanks for all the good times

  • FCP 5.0.4 won't render all tracks.

    FCP 5.0.4 fails to render all of my tracks. There are three, and in some places, four video tracks. It only renders the third and fourth tracks. Plays fine in the timeline but will not output in any format. Audio is fine. Video is all black except where there are three or more video tracks, the topmost tracks play fine.
    I have trashed FCP preferences, uninstalled and reinstalled FCP - no change. The source files are fine, as I can play them in Quicktime with no problem. They even play on other machines.
    Any ideas? Please don't tell me to trash the preferences, as I've already tried that.

    I've been pullin' my hair out lately with the whole render issue as well. MAY have just stumbled onto a solution a few min ago. I looked at the permissions settings on the external disc that I'm using as a scratch disk. It was set to read/write for everyone under the sun. I thought I'd just propogate those permissions one more time to be safe and I got an error msg that said I couldn't propogate because some items won't let me. So, I checked IGNORE OWNERSHIP ON THIS VOLUME and voila. Render issue solved. However, I don't think this is the best way to solve the problem...but in a pinch...may just work for ya.
    Good luck

  • PDF Generated doesn't render on other PDF Viewer

    This is my first time on the forum, so pardon me if this posting is on the wrong category. I have a question regarding the PDF output of my generated PDF. I have created a PDF using the LiveCycle webservices and everything is working perfectly, the only problem I have is that when I try to view the PDF on other viewer other than Adobe Acrobat it doesn't render. Can anyone tell me what can I do so that the PDF I created can be view on other viewer other than Acrobat. Thanks for your time and help.

    Hi,
    What viewer are you trying to open the pdf in? Check the version of pdf you are converting to in the conversion settings. Maybe the viewer is too old for that version.
    Maybe you could post a sample pdf?

  • Illustrator CC doesn't render in real time (only when I scroll), how do I fix this?

    It seems to have happened ever since I opened a PDF in Illustrator. A few errors came up but I didn't imagine it would result in permanently messing up the program.
    It still works, but it doesn't render and changes I make until I scroll. I can't see what I'm working on as I work on it. Even if I zoom in or out, nothing on-screen changes except when I scroll.
    If someone could help me figure this out, I'd appreciate it immensely.

    Visocacae,
    Are all the Verdana (and Tahoma) font faces installed and enabled as TTF (not OTF)?

  • Settting render attribute doesn't render the child taskflow

    i am having 2 taskflows which is consumed by a consuming page.
    On the consuming page on which these 2 taskflows are dropped as region.
    the 2 regions are placed along with some buttons inside separate panelGroupLayouts.
    i mean in 1 panelGroupLayout 1 region and button is there and similarly in 2nd panaleGroupLayout other regin and button.
    On consuming page there is next button , i have set it to render 1st panelGroupLayout.
    when i click Next button it renders the 1st region and buttons correctly. But when i click the back button from the 1st region and come back to consuming page and again click NEXT button, it remains at the same consuming page
    and doesn't render the region 1 and its buttons again.
    in code, on the 1st panelGroupLayout i have put rendered="a variable in backingbean of consuming page which i am setting to true on the next button click event".
    Please help in this issue.
    Thanks in advance.

    user, please tell us your jdev version!
    it you yet the rendered property to false you have to do a full refresh to get the region back. Use the visible property instead.
    Timo

  • Edited Elements file doesn't render

    New LR4 user. After editing in Elements the edited file doesn't render in LR although I can see it as it was before editiing? Help please!

    When you say it doesn't render in LR, do you mean you press Save in Elements and the photo never appears in LR? 
    Which version of Elements?  And is LR4 updated to 4.2?

  • CS4 Media Encoder doesn't render Quicktime at all

    The CS4 Media Encoder will render H.264 and FLV, but doesn't render any form of Quicktime at all.
    The Queue loads the project, pretends to render, but does not show progress frames. Seconds later (way too early!) there is a green checkmark that the render completed successfully. The log file looks successful with essentially the same content as for H.264 and FLV.
    For example this log file shows a 1-minute sequence "rendered" in 30 seconds -- normally takes 3 minutes -- and no .mov was created.
    10/29/2008 7:09:16 AM : Queue Started
    - Source File: C:\DOCUME~1\MARATH~1\LOCALS~1\Temp\happyValleyBeijingMoreHighlights_5.prproj
    - Output File: C:\Documents and Settings\Marathon Runner\Desktop\china\finished\happy valley beijing\more highlights\Sequence 01.mov
    - Preset Used: NTSC DV
    - Video: 720x480, 29.97 [fps], Lower, Quality 100
    - Audio: 48000 Hz, Stereo, 16 bit
    - Bitrate: DV/DVCPRO - NTSC
    - Encoding Time: 00:00:00
    10/29/2008 7:09:45 AM : File Successfully Encoded
    10/29/2008 7:09:46 AM : Queue Stopped

    >always save the project before you export
    Very good advice.
    I would also say, save your project after any edit that you feel you can't afford to lose.
    Cheers
    Eddie
    PremiereProPedia   (
    RSS feed)
    - Over 300 frequently answered questions
    - Over 250 free tutorials
    - Maintained by editors like
    you
    Forum FAQ

  • Firefox doesn't render my web page correctly other browsers do

    Hi My website works correctly in IE9, Safari, Opera and Chrome but Firefox doesn't render my Contacts page correctly. The contact form position is wrong and the navigation does not work for the Contacts page. The only issue is with Firefox which fails to render the Contacts page correctly. Both HTML and CSS validate.
    The website is http://www.pcwebsite.org.uk

    thanks you for the link. I'll try that option next. But clearly since:
    Internet Explorer 9,8, even 7
    Chrome
    Safari
    and Opera
    render the webpage correctly and there is no issue with validation of both HTML and CSS, then surely Firefox is not working to industry standards.
    I can use any browser I care to but I can't control what browser my potential clients use.
    "I'm not sure if this is caused by the floating sidebar content as a style rule of clear:both or clear:left partially fixes this at least horizontally (it is still off to the left)."
    There is nothing wrong with the code is there as it works perfectly with the other browsers listed above? Maybe I should put the whole web page in a table.

  • Arabic text doesn't render properly when export to PDF

    Hi
    I am having problem with exporting Arabic text to pdf and it doesn't render properly. The whole content render properly expcet the white space; the funny charater has been replaced to white space.
    Does any one having that problem?
    Note: I have tested with using both Crystal Report Designer XI and Crystal Report 2008 which come out same result.
    Thanks,
    Yin

    Morning Yin,
    Did you have any luck with the download? The link I sent you does not need to download using username and password.
    Additionally I doubt if your company would know what your username and password is for SAP as you got to request SAP to get one.
    here is the link to the registration page.
    [https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/new_user_pass/infouser_request.htm]
    Register yourself first and then you will receive the username and password for it.
    Hope this helps
    Regards
    Jehanzeb

  • Unicode doesn't render properly

    Hi all,
    I have problem with Unicode. Air doesn't render Khmer Unicode
    properly, but when I open the file in Safari and Chrome, it works
    fine. If I'm not mistaken, Air, Safari and Chrome use Webkit to
    render HTML. Why does it work with Safari and Chrome and doesn't
    work with Air? Any idea?
    Thanks in advanced.
    Cheers,

    Hi,
    Can you please file a bug at http://adobe.com/go/wish?
    Thanks.

  • JSP containing ADF components doesn't render properly after upgrading

    The migration seemed to go OK but when I open the JSP, the design view looks very different. It doesn't render any of the objects in the page and it only shows them as rectangular blocks ( like input text) in a tree view.

    Hi,
    upgrade from which release to which other release ? JSP or JSP with JSF
    Frank

  • Safari doesn't render pages ( white pages)

    Since I updated to Maverick (from Lion) Safari doesn't render web pages anymore.
    The pages loads, but stay blank (all white) , but I can still interact with them ( view pages source and click on any links)
    I created a new account, threre everything work perfectly.
    I tried to remove all files, cahes,  preferences and plugins... but nothing work!
    Also, Chrome, Firefox and Opera all work perfectly
    Anyone know about a third party app that could cause this
    Anyone have any idea on what could be going on ?
    Thanks

    Try troubleshooting Safari extensions...
    From the Safari menu bar click Safari > Preferences then select the Extensions tab.
    Turn that OFF, quit and relaunch Safari to test. If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

  • I have 3 macs. 2 are Lion, 1 I left Snow leopard so I can access data from my old Quicken Application that doesn't work with Lion. If I move to iCloud, will I no longer be able to access my MobileMe email on the Snow Leopard mac?

    I have 3 macs. 2 are Lion, but 1 I left Snow leopard so I can access data from my old Quicken Application that doesn't work with Lion. If I move to iCloud, will I no longer be able to access my MobileMe email on the Snow Leopard mac?

    What version of word do you have? The TS3938 sounds like it's a PowerPC app- written for an old architecture that is no longer supported in Lion. If this is the case, your files are fine- you just need a newer version of word that will run in Lion in order to open them. The newest version (2011) should be readily available anywhere, and has worked fine for me ever since I switched to Lion on release day....

  • My SuperDrive doesn't work after Lion update

    My Superdrive doesn't work after Lion update, i have tried a few solutions that i found in forums, but nothing seems to work, please help me shed some light on my problem.
    Thanks

    I too have had the problem since updating to Lion.  My superdrive isn't even recognized.  I have repaid hard disk permissions and also reset PRAM.  Sure wish I had a fix. 

Maybe you are looking for