FCP 7 and Lion reconnecting problems

I still haven't heard any comment from Apple on this. I feel caught in the middle here, as an editor. I had to get Avid Media Composer 6 because everyone I work for seems to be running away from Apple now that they've released FCPX. To install the latest version of Media Composer, I had to upgrade to Lion. I was told FCP7 would still work on Lion but I'm having all sorts of issues, beginning with problems reconnecting media.
Does anyone know if Apple is going to release some fixes for Studio 3 so it does work with Lion as advertised. Apple is behaving strangely, or really, poorly these days. It's one thing to leave old apps and hardware behind as you move forward, but when you start leaving your customers in bad situations, that's not good. Please Apple. Communicate with us on this. I'm shocked really. I understood FCP7 had about a 50% marketshare. Why drop that ball?
I don't like Lion that much so far either. Not happy.

Did you do a clean installation of Lion or did you install it over your existing OSX 10.6 and all your apps?
If you did an overwrite install, you may be dealing with all the problems you had in 10.6 but didn't really know about because they had not risen to the level of noticable. Upgrading an OS can break these incipient issues.
A number of people are running FCS3 on 10.7 without a host of issues.
My suggestion (painful as it may sound) is to get a new hard drive for your MacPro and do a clean installation of 10.7 on it then install FCS and your other apps from the original disks. My guess is a number of issues will be cleaned up.
Good luck.
x

Similar Messages

10.6.8 and Lion wifi problem

hello,
I am trying to use my mac for one week...... ;(
everything was fine until update to 10.6.8... wifi problem as many of you already know. tried to update to lion, same problem. Got back to 10.6 and then update to 10.6.8 using software update... then formatted again, fresh install 10.6 update to 10.6.8 using combo update, same problem.
tried to delete firewall file, turned off ipv6, changed security of my router from wpa2 to wpa, tried different channels, reset SMC and RAM, all the solutions we can research... all the same
now I am on 10.6.7 and seems i still has the problem happening....
hello apple, more than a month and no solution yet????
I've read somewhere a new procedure that consists in update to 10.6.8 and before restart do some procedures.... but I can't find it anymore, any help?
I guess that solution is the only one remaining I did not try yet.
thanks and regards,
raul

well, it's caused by software only, there is nothing wrong with airport hardware
hard to believe, it's like windows old time sake, loosing precious days fighting with a computer...
too bad apple

FCP X and Importing Media problems

I currently have the Macbook Pro Retina (running Mountain Lion), A Sony HDR-PJ10e Camcorder and Final Cut Pro X and am having increasing problems trying to import the video shot on the camcorder.
Prior to installing ML, the camcorder would be recognised within FCP, but refused to recognise any of the footage, indeed if I tried to import the MTS files direct, they are greyed out which I have previously read is a known issue of sorts and that only import from camera can be used (but is not working in this case)
I have tried encoding the MTS files using Adobe Media Encoder, i have tried various formats but the only only that FCP will recognise is quicktime MOV files.
What can possibly be causing this problem?
I should add that the footage is shot in 1080p, but even down converted to an MPEG2 file (be that .mpg or the split .m2v and wav files) FCP still refuses to recognize these as a valid format as they are greyed out when trying to "import files"
Any help would be appreciated but I have to confess to being a relative novice to all things mac.

Prior to upgrading to ML, the camcorder was recognised but refused to import anything using the method you describe (I already tried that). I was able to make an archive from the camcorder but it will not even open that archive to iport anything.
Unfortunately, since the upgrade to ML when the camcorder connects to the computer, the PMB software crashes. The camcorder is still available in Finder after pmb has crashed, but it is no longer recognised in FCP as it was prior to the upgrade to ML.
The camcorder has internal memory and the ability to use a card, but everything is currently stored on the internal memory, everything is in the exact same format, frame rates etc...

Aperture and Lion vault problem. Have Lion ruined my Vault?

Hi!
I have my iMac since the release of mid-2010 models but it's my first post here.
I have installed Lion from a clean install of Snow Leopard and 10.6.8. I am restoring my programs, and I have a very big problem with Aperture.
I have restored my Vault and all my photos are show as "disconnected" because the volume "Mackintosh HD" is offline...
I can't understand this. I have use this Vault before without problems...
What can I do? Is my library ruined?

Figured it out. I started Aperture using CMD-OPT and repaired permissions. All the images came back. Not well thought out by Apple - Aperture was right where it always was, but after the upgrade, for some reason I no longer had permission to view my own images.

FCP X and Lion 10.7.4 - better?

I have read comments that suggest 10.7.4, released yesterday, has improvements on the memory management issue that has caused many of us so much grief with FCP X.
I have not had the chance to push it hard yet and, truth be told, since FCP X 10.0.4 I haven't had issues, but also haven't been doing any heavy duty work on it.
I would like to hear how this has worked out for you guys.

I have that feeling to, but can not explain it further. I have never had any crashes or spinning wheels with previous versions, but now I can see that FCPX uses even less memory than before almost never over 4 GB, and that actually worries me that the program will not eat more of my 10 GB.

FCP 7 and FCP-X on same partition: what problems are caused?

I'm trying to figure out if the performance issues I'm having with FCP-X can be remedied, or if the problem is just buggy software. Apparently, even a newer, faster, more powerful Mac is not the answer, as I read complaints from people with new, suped-up Mac Pros who say the software slows to a crawl. Sounds familiar to me, but I'm on iMacs and a MacBook Pro -- all my Macs are 3-4 years old, and are from that Core 2 Duo era, not Quad Core processors. All my Macs are maxed out at 4 GB or RAM. So I'm certain new machines are in my future. But judging from what some people say about their newer, faster machines, I'm not entirely convinced that it would solve the problem I'm having with FCP-X.
There are numerous threads here reporting sluggish performance (perpetual spinning beach balls) relating to a memory leak or a problem relating to FCP-X's usage of memory (some say it happens worse in Lion). Is that the problem? And if it is, why hasn't Apple addressed it?
Then there is this matter of having FCP-7 (FCP Studio) and FCP-X installed on the same partition. Apple's "Best Practices" article clearly states that it's best to have the two applications installed on separate partitions. Only problem (for me) is, I already had FCP-7 installed on the primary partition. When I purchased FCP-X (the day it first became available), I hadn't read that article, so naturally, the software got installed...you guessed it...on the primary partition. And yes, I could uninstall FCP-7 (FCP Studio), create a new partition, and then re-install it. But I remember how long it took to install FCP Studio (about 4 hours, as I recall), so I've put off the ordeal of heading down that road.
So I'm wondering.......
What problems are known to occur as a result of having FCP-7 and FCP-X installed on the same partition? Would my sluggish performance be related to this? Or would going to the trouble of uninstalling FCP-7, re-partitioning, then re-installing FCP-7 (FCP Studio) into its own play space, only be a waste of time?
What evidence is there that this co-install is the culprit causing sluggish performance?
What ARE the problems that the co-install causes? I've never heard anyone address this specifically.

When FCP X first came out, Apple recommended keeping FCS 3 on a separate partition, so I did that.
Recently I did a clean reinstall or Lion and installed FCS 3 as normal, followed by FCP X 10.0.3.
During the FCP X install, FCP 7 was moved to a new folder called Final Cut Studio.
'Studio' and FCP X now work happily on the same partition - but I have not tried opening both at the same time!
Just now, both applications are the most stable they have ever been.
These are my standard tips for improving performance:
First, check the spec of your iMac against the system requirements:
http://www.apple.com/finalcutpro/specs/
Particularly your graphics card. If it's listed here, it's not suitable:
http://support.apple.com/kb/HT4664
If you are getting crashes, there is some conflict on the OS. Create a new (admin) user account on your system and use FCP X from there - if it runs a lot better, there's a conflict and a clean install would be recommended.
Other ways to improve performance:
Keep projects to 20 mins or less. If you have a long project, work on 20 min sections then paste these into a final project for export.
Create Optimised media - most camera native files are highly compressed and need a great deal of processor power to play back - particularly if you add titles, filters or effects. ProRes 422 takes up much more hard drive space but is very lightly compressed. It edits and plays back superbly.
Hide Waveforms at all times when you don't need them (both in Browser and Storyline / Timeline). They take up a lot of processor power.
Create folders in the Project and Events libraries and put any projects you are not working on currently, in those folders. This will help a lot.
Move your Projects and Events to an external HD (make sure it's formatted OS Extended - with journaled on or off) and run from there.
Contrary to what Ian said above, the biggest single improvement I saw in performance was when I upgraded the RAM from 8 GB to 16.
Andy

TS1925 iPad IOS 7.0.2 and Mountain Lion 10.8.5 Calendar colors do not match between computer and device. Problem did not exist until updated IOS arrived. Colours change of their own free will despite being corrected on both iPAD and MacBook Pro. Any an

iPad IOS 7.0.2 and Mountain Lion 10.8.5 Calendar colors do not match between computer and device. Problem did not exist until updated IOS arrived. Colours change of their own free will despite being corrected on both iPAD and MacBook Pro. Any answers?

Please do not post the entire messages log as it takes up unnecessarily a lot of space. It seems that there is a corrupt/nonfunctional file called
[email protected]nt.plist
Go to your hard drive, enter library, go into users, and go into launch agents and delete the thing above. Empty the trash and restart.

Ever since installing iCloud and Lion my computer is slow or freezes. The color wheel comes on and My work stops. I have only a small window of time where my computers will function normally during the day. I know many others that have the same problem.

Ever since installing iCloud and Lion my computer is slow or freezes. The color wheel comes on and My work stops. I have only a small window of time where my computers will function normally during the day. I know many others that have the same problem. I'll get 20-30 minutes of work done and then a sync or something comes on, the color wheel of death shows up, and my productivity is shot. I have to shut the computer down the hard way! when it comes back up, it is still either frozen or slow. I've checked in at the genius bar and all they say is that there have been some problems that Apple is trying to fix. It effects Mail, Contacts, Safari, Calendar....yeah, pretty much everything. My iPhone and iPad are not effected as much so I end up doing what I can with them. I've seen the blogs out there and understand that many have the same problem. I have been waiting to read about a fix but I have found nothing! Any ideas?

Not enough free space on the startup disk can slow the system down.
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.
For startup issues... open System Preferences > Users & Groups - Login Items. Delete any apps listed there then restart your mac.
And disable the Lion "resume" feature.
Open System Preferences > General
Deselect: Restore windows when quitting and re-opening apps
And Spotlight may be indexing... you can turn that off > Turning Off Spotlight | Mac Tricks And Tips

Hi! I work with Photoshop/Premiere Elements 10 on my snow leopard (10.6.8) without problems since years. Now I want to move over to the new MacBook Pro (and lion 10.7.5) but only Photoshop runs on it, every Premiere version (I downloaded Elements 12 and f

Hi! I work with Photoshop/Premiere Elements 10 on my snow leopard (10.6.8) without problems since years. Now I want to move over to the new MacBook Pro (and lion 10.7.5) but only Photoshop runs on it, every Premiere version (I downloaded Elements 12 and further more) stops installation and shows Installation ERROR: ASU has quit unexpectedly, Media DB Error: 18. Please help!

run the cleaner and retry installing per, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

FCP 7 and FCP X on Same Computer, Problems?

I am a user of FCP 7 and I want to start to learn how to use FCP X.
If I install FCP X on the same computer as I have FCP 7, will there be any conficts or issues?
Thanks in Advance
Mac Pro 2.66 GHZ Quad - Core Intel Xeon
OS X Lion 10.7
10 GB Ram

Not really.
All FCS the apps get moved to a sub folder in Applications, so you will have to relink their dock icons to match the new location (delete the old ones and drag them in again). After you installed FCPX and want to run FCP7 for the first time, start and then quit Motion 4 first -- wierd, but that's the official Apple position.

In FCP x backup process is constantly running in background even though its done which results into slow working of FCP x. any idea to resolve the issue. I am using 10.1.3 and facing the problem ever since i have updated my FCP x to 10.1.3

in FCP x backup process is constantly running in background even though its done which results into slow working of FCP x. any idea to resolve the issue? I am using 10.1.3 and facing the problem ever since i have updated my FCP x to 10.1.3

Go into preferences and under playback turn off background render. That helped speed things for me when working with large files.

SOLUTION: Are you having problems using HDV in FCP X and iDVD?

If you edit HDV (TAPE) in FCP X and want to burn the video in iDVD you will find the following problem . . . iDVD squashes the image as shown in the screenshot below.
Whether you export as ProRes or H.264, iDVD will see it like this as a squashed image.
This is because iDVD does not recognise HDV anamorphic images unless they are in the Apple Intermediate Codec.
There are 2 solutions to this problem:-
1. Create a ProRes 422 Custom Compressor Preset with a frame size of 1920 x 1080.
The only downside to this is that the conversion process in my 2008 iMac takes about 5 times realtime.
2. Create an Apple Intermediate Codec preset for HDV. This encodes on my iMac in around realtime, so it is at least 4 times faster than the ProRes solution.
Unfortunately, if you have Compressor 4 you cannot create Apple Intermediate Codec presets, but Compressor 3.5 will and what is more important, that preset can be installed in Compressor 4.
So you can export your HDV project from FCP X using Compressor Presets in either ProRes or AIC and use the resulting file in iDVD to get a correctly proportioned image like this.
I prefer to use the AIC preset as it is 4 times faster and there is no quality difference on the final DVD.
What do you do if you haven't got Compressor 3.5 or 4?
Well you can email me for a 12KB copy of the preset as I believe FCP X can use it even though you don't have Compressor.

Ian,
Thanks for the tip!

Round Trip problems with FCP, Motion and 16:9

Hello all-
I've been having some problems with FCP5 and Motion 2. I am working with anamorphic footage (mini dv), and my problem lies in trying to use the "send to" feature in FCP to Motion 2. If I send some footage to Motion 2, edit it, and then go back to FCP to look at my edit, the anamorphic flag has been removed... the video is squished and there are black bars on the right and left sides of the film. I can easily fix this if I find the clip in the FCP browser and check the anamorphic flag, then drag and drop that clip over the original in the sequence, but I was wondering if there was an easier way. Is there a way to make it be anamorphic when it comes back into FCP from Motion 2?
Thanks!
Dual 1.8 G5/2GB & 12 PB G4/1.25GB Mac OS X (10.4.4)

Yes, it loses the anamorphic flag on round trip. Just
ctrl/right-click on the Motion project in your
timeline, select Properties/Format and click on the
anamorphic setting column.
Patrick
Patrick-
Thanks for the reply. That's exactly what I've been doing, but I was just wondering if this was an actual bug or not. I guess we will have to wait for Apple to fix it...
BTW- Whenever I check the anamorphic culumn, I always have to re-drag and drop the clip in the timeline again. Is this right? Or should it go ahead and change it in the timeline automatically?
Thanks again!
Dual 1.8 G5/2GB & 12 PB G4/1.25GB Mac OS X (10.4.4)

SOLUTION: Are you having problems with using HDV, FCP X and iDVD?

If you edit HDV (TAPE) in FCP X and want to burn the video in iDVD you will find the following problem . . . iDVD squashes the image as shown in the screenshot below.
Whether you export as ProRes or H.264, iDVD will see it like this as a squashed image.
This is because iDVD does not recognise HDV anamorphic images unless they are in the Apple Intermediate Codec.
There are 2 solutions to this problem:-
1. Create a ProRes 422 Custom Compressor Preset with a frame size of 1920 x 1080.
The only downside to this is that the conversion process in my 2008 iMac takes about 5 times realtime.
2. Create an Apple Intermediate Codec preset for HDV. This encodes on my iMac in around realtime, so it is at least 4 times faster than the ProRes solution.
Unfortunately, if you have Compressor 4 you cannot create Apple Intermediate Codec presets, but Compressor 3.5 will and what is more important, that preset can be installed in Compressor 4.
So you can export your HDV project from FCP X using Compressor Presets in either ProRes or AIC and use the resulting file in iDVD to get a correctly proportioned image like this.
I prefer to use the AIC preset as it is 4 times faster and there is no quality difference on the final DVD.
What do you do if you haven't got Compressor?
Well you can email me for a 12KB copy of the preset as I believe FCP X can use it even though you don't have Compressor.

Ian,
Thanks for the tip!

I have updated my mac book pro and am trying to get icloud and the new lion version. The lion version will not download and my biggest problem is finding icloud on my system preference. Can anyone help me?

I have updated my mac book pro and am trying to get icloud and the new lion version. The lion version will not download and my biggest problem is finding icloud on my system preference. Can anyone help me?

Welcome to the Apple Support Communities
Connecting your MacBook Pro and your MacBook Air will be the fastest way, but you have to spend money on cables and adapters (also, your MacBook Pro doesn't support Thunderbolt).
As you have a Time Capsule, one thing you can do is to start your MacBook Pro and make a Time Machine backup. Then, turn on your MacBook Air and set it up. Setup Assistant will ask you to restore a backup, so select the option to restore the backup from the Time Capsule and be patient. This can take a lot of time if you have to migrate a lot of files

FCP 7 and Lion reconnecting problems

Similar Messages

Maybe you are looking for