FCP 7 could not open bec of missing HDV (1440x1080) 30p

all morning i worked on editing all good then fcp 7 getting slower could not see the video from timeline so I restart the computer. Then FCP could not open because of missing HDV (1440x1080) 30 p. I thought to trash fcp preferances but I could not find the fcp prefereances. Geez... What should I do?

Download PREFERENCE MANAGER from digitalrebellion.com. It's free, and trashes all threee preference files with one click.

Similar Messages

I had trouble updating itunes to the latest version. It suggested I manually install and that failed. I tried uninstalling and reinstalling and that gave me an error message stating that I could not open itunes because MSVCR82.dll was missing. Help!

When I tried to update to the latest version of itunes, I kept getting a message saying installation failed and if the problem persisted I should try to install manually. When that failed I uninstalled and tried to reinstalled, then I got messages saying MSVCR.dll is missing and could not open itunes. Any solutions out there?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

I have a macbook pro with the latest update, and any Pdf file I have opened online or downloaded and I try to print it gives me this message Adobe Reader could not open 'April-15th-2014-Messenger.pdf' because it is either not a supported file type or beca

Adobe Reader could not open 'April-15th-2014-Messenger.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

Most likely http://helpx.adobe.com/acrobat/kb/pdf-error-1015-11001-update.html

Unable to start Photoshop CS6 - could not open a scratch file because the file is locked (Windows)

When I first installed Adobe Photoshop CS6 I was unable to run Photoshop or Bridge CS6. Photoshop would give me an error about "could not open a scratch file because the file is locked. If I ran either of these programs as an administrator they would run without issue, this led me to believe that there was a permission issue somewhere. After some digging I found out the both Bridge and Photoshop try to create a temp file (similiar to Photoshop Temp2777223910092) on the c:\ drive of the computer. In my case the user that I was logged in with did not have access to write to the root of the C:\ drive. Note that you run the program as the administrator and change the scratch disk location as that changes the preference for the administrator user and not the user that you are currently logged in as.
To get around this issue I first had to give the user that I was logged on with write permissions to the root of the C:\ drive. Next try and run Photoshop, you will get an error another error about the scratch disk and about and invalid or missing setting file. To correct this you need to have run Photoshop as an administrator, next you can go to Users\Admin\AppData\Roaming\Adobe\Adobe Photoshop CS6\Adobe Photoshop CS6 Settings and copy Adobe Photoshop CS6 Prefs and/or Adobe Photoshop X64 CS6 Prefs to Users\<your logged in username>\AppData\Roaming\Adobe\Adobe Photoshop CS6\Adobe Photoshop CS6 Settings.
Photoshop and bridge should now start up with no issues.
I hope that this can help others out there as this caused me a great deal of frustration when upgrading to CS6.

station_two wrote:
OK, here comes the explanation of what the scratch disk does and why it's optimal to have it on a physically separate internal drive (not partition!) other than your boot drive
I probably shouldn't say anything since it could complicate this thread, but the rules of thumb can be different under special circumstances when SSD is involved.
IF you have a LOT of empty space on your SSD-based system drive, then Photoshop can actually work great with it's scratch setting pointed at the system drive. This is because a) SSD transfers are much faster than spinning hard drives and b) there's no seek time, so simultaneous transfers to/from scratch and swap files aren't devastating to performance, and you can see a net gain because of the increased I/O throughput over what's possible using a separate spinning drive for scratch.
But if you don't have a huge amount of free space (hundreds of GB) on the system SSD, it's definitely better to use a separate drive, as station_two has said.
Also, up to about a year or so ago, you had to try to severely limit write activity to your SSD drive, since you could actually wear them out by repeated high data write activity. That's pretty much a non-issue now with the advent of things like the SandForce in-drive controller that does wear-leveling inside the drive. Modern drives will last 10 years or more in normal typical use, without special consideration.
As it turns out, making a RAID array of SSDs is a great way to boost performance across the board, have bunches of free space, and ensure even the heaviest usage doesn't shorten the drive life. I have done so, creating a 2 TB system drive C: made from 4 SSDs and Photoshop's swap file (and pretty much everything else) pointed to C:. This system flies, and I can barely tell when Photoshop and/or Windows "goes virtual" and starts using its scratch/swap files heavily. I don't even notice Photoshop auto-saves.
Sorry for the SSD diversion.
Back on topic:
Pretty much everyone who's successfully using a computer - Mac and PC users alike - comes to realize after a while that the task of integrating things on their computers and making everything work falls on THEM, not the developers of applications like Adobe. Some applications pose unique challenges, but to think you can just throw up your hands and try to make it someone else's problem when something goes wrong simply isn't a viable strategy. Maybe that's how things should be, but it's not how it is.
For those of you struggling to get Photoshop to run properly, bear in mind that it's on you to get things working. It works for most folks. It could be a configuration or setup choice you've made that may need revisiting, or some kind of restorative activity that you need to do, or even something very minor like clearing your Photoshop preferences, but it may well take your learning new things and doing things you didn't think you'd have to do to get back to where you can edit photos. It's no one's problem but your own.
So let us here on the forum help you - when we say to do something, try it. We're not here to jerk you around; we're users just like you who have already found the ways to make things work, and we'd like to help you do the same.
-Noel

TS3299 Upgade error: Could not open key: HKEY_CURRENT_USER\SOFTWARE\Apple Inc.\Internet Services. Any advice?

During a standard iTunes upgrade to the latest version (11.1.4 for Windows Vista), the installation failed with the following error message: Could not open key: HKEY_CURRENT_USER\SOFTWARE\Apple Inc.\Internet Services. Does anyone have any advice as to how I can fix this and reinstall iTunes? When I try to open iTunes I get the following message: iTunes.exe. This application has failed to start because MSCVR80.dll was not found. Re-installing the application may fix this problem. When I try to run the installer I get the above error so I'm going round in circles!

Solved: I had somehow lost permission to access the HKEY above (or rather, its parent key HKEY_CURRENT_USER\SOFTWARE\Apple Inc.) so I went to the registry editor and checked the 'Full Control' box for the key and the installer now works.
I used this site to fix the MSCVR80.dll error: http://pcsupport.about.com/od/findbyerrormessage/a/msvcr80-dll-not-found-missing -error.htm

Could not open DVD with libdvdcss

I installed vlc, xine-lib, xine-ui, mplayer, libdvdcss, libdvdnav, libdvdread.
I also installed "codecs" with packer.
I'm trying to play two different DVDs and the following is what I get (even putting the disk into /dev/sr0 or using another DVD won't change):
$ vlc /dev/sr1
VLC media player 2.1.5 Rincewind (revision 2.1.4-49-gdab6cb5)
[0x95b1220] pulse audio output error: PulseAudio server connection failure: Connection refused
[0x952a8f8] main libvlc: VLC wird mit dem Standard-Interface ausgeführt. Benutzen Sie 'cvlc', um VLC ohne Interface zu verwenden.
libdvdnav: Using dvdnav version 4.2.1
libdvdread: Could not open /dev/sr1 with libdvdcss.
libdvdread: Can't open /dev/sr1 for reading
libdvdnav: vm: failed to open/read the DVD
[0xb20a5e48] filesystem access error: read error: Input/output error
[0xb39a6e10] main stream error: cannot pre fill buffer
libdvdnav: Using dvdnav version 4.2.1
libdvdread: Could not open /dev/sr1 with libdvdcss.
libdvdread: Can't open /dev/sr1 for reading
libdvdnav: vm: failed to open/read the DVD
libdvdread: Could not open /dev/sr1 with libdvdcss.
libdvdread: Can't open /dev/sr1 for reading
[0xb1abe3f8] dvdread demux error: DVDRead cannot open source: /dev/sr1
[0xb5a03700] main input error: open of `dvd:///dev/sr1' failed
$ mplayer /dev/sr1
MPlayer SVN-r37224 (C) 2000-2014 MPlayer Team
210 audio & 441 video codecs
Playing /dev/sr1.
File not found: '/dev/sr1'
Failed to open /dev/sr1.
Exiting... (End of file)
$ xine /dev/sr1
Dies ist xine (X11 gui) - Ein freier Video-Player v0.99.8-[DEBUG].
(c) 2000-2010 The xine Team.
videowin: display is using xinerama with 1 screens
videowin: going to assume we are using the first screen.
videowin: size of the first screen is 1024x768.
videowin: Xinerama fullscreen parameters: X_origin=0 Y_origin=0 Width=1024 Height=768
pixel_aspect: 0.997627
Failed to open VDPAU backend libvdpau_nouveau_vieux.so: Kann die Shared-Object-Datei nicht öffnen: Datei oder Verzeichnis nicht gefunden
vo_vdpau: Can't create vdp device : No vdpau implementation.
xv_set_property: property=1, value=0
xine: could not connect to socket
xine: Datei oder Verzeichnis nicht gefunden
this is my video card
01:00.0 VGA compatible controller: NVIDIA Corporation NV11 [GeForce2 MX200] (rev b2) (prog-if 00 [VGA controller])
Subsystem: CardExpert Technology Device 0001
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
Memory at d6000000 (32-bit, non-prefetchable) [size=16M]
Memory at d8000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at d7ff0000 [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 2.0
Kernel driver in use: nouveau
Kernel modules: nouveau
these commands were asked me on freenode's #archlinux channel:
$ stat /dev/sr0
Datei: „/dev/sr0“
Größe: 0 Blöcke: 0 EA Block: 4096 blockorientierte Spezialdatei
Gerät: 5h/5d Inode: 6351 Verknüpfungen: 1 Gerätetyp: b,0
Zugriff: (0660/brw-rw----) Uid: ( 0/ root) Gid: ( 93/ optical)
Zugriff : 2014-07-12 22:52:20.959057344 +0200
Modifiziert: 2014-07-12 22:52:20.959057344 +0200
Geändert : 2014-07-12 22:52:20.959057344 +0200
Geburt : -
$ getfacl /dev/sr0
# file: dev/sr0
# owner: root
# group: optical
user::rw-
user:christian:rw-
group::rw-
mask::rw-
other::---
$ loginctl show-session $XDG_SESSION_ID -p Active
Active=yes
I feel like some other driver is missing...
Last edited by leonixyz (2014-07-12 21:58:01)

dodo3773 wrote:Can you test a regular video file and it works fine in vlc?
ok, one step toward the solution:
I've scp-ed an .mp4 and an .mpg from my laptop, chmod 777 them and finally I can play them
dodo3773 wrote:
Also, do you get any output from this command?:
dmesg | grep CD
$ dmesg | grep CD
[ 1.227637] scsi 0:0:0:0: CD-ROM HL-DT-ST CD-RW GCE-8320B 1.02 PQ: 0 ANSI: 5
[ 1.238061] scsi 0:0:1:0: CD-ROM LG DVD-ROM DRD8160B 1.01 PQ: 0 ANSI: 5
[ 1.458996] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.459461] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.471069] sr 0:0:1:0: Attached scsi CD-ROM sr1
[ 1286.396790] sr 0:0:1:0: [sr1] CDB:
[ 1286.426850] sr 0:0:1:0: [sr1] CDB:
$ pacman -Qi vlc
Name : vlc
Version : 2.1.5-1
Beschreibung : A multi-platform MPEG, VCD/DVD, and DivX player
Architektur : i686
URL : http://www.videolan.org/vlc/
Lizenzen : LGPL2.1 GPL2
Gruppen : Nichts
Stellt bereit : Nichts
Hängt ab von : a52dec libdvbpsi libxpm libdca qt4 libproxy sdl_image libdvdnav libtiger
lua libmatroska zvbi taglib libmpcdec ffmpeg faad2 libupnp libshout libmad
libmpeg2 xcb-util-keysyms libtar libxinerama
Optionale Abhängigkeiten: avahi: for service discovery using bonjour protocol[Installiert]
libnotify: for notification plugin[Installiert]
ncurses: for ncurses interface support[Installiert]
libdvdcss: for decoding encrypted DVDs[Installiert]
lirc-utils: for lirc plugin[Installiert]
libavc1394: for devices using the 1394ta AV/C
libdc1394: for IEEE 1394 plugin
kdelibs: KDE Solid hardware integration
libva-vdpau-driver: vdpau back-end for nvidia[Installiert]
libva-intel-driver: back-end for intel cards
libbluray: for Blu-Ray support[Installiert]
flac: for Free Lossless Audio Codec plugin[Installiert]
portaudio: for portaudio support
twolame: for TwoLAME mpeg2 encoder plugin
projectm: for ProjectM visualisation plugin
libcaca: for colored ASCII art video output[Installiert]
libgme: for libgme plugin
librsvg: for SVG plugin[Installiert]
gnome-vfs: for GNOME Virtual File System support
libgoom2: for libgoom plugin
vcdimager: navigate VCD with libvcdinfo
aalib: for ASCII art plugin[Installiert]
libmtp: for MTP devices support
smbclient: for SMB access plugin[Installiert]
libcdio: for audio CD playback support[Installiert]
ttf-freefont: for subtitle font
ttf-dejavu: for subtitle font
opus: for opus support[Installiert]
libssh2: for sftp support[Installiert]
lua-socket: for http interface
Benötigt von : Nichts
Optional für: Nichts
Konflikt mit : vlc-plugin
Ersetzt : vlc-plugin
Installationsgröße: 44319,00 KiB
Packer : Giovanni Scafora <[email protected]>
Erstellt am : Mi 09 Jul 2014 15:14:36 CEST
Installiert am : Sa 12 Jul 2014 21:15:04 CEST
Installationsgrund : Ausdrücklich installiert
Installations-Skript : Ja
Verifiziert durch: Signatur

"Could not open a file mapping" and crashes.

Hello. I've just downloaded ReaderX from Adobe website. Rebooted. Now when I try to start Reader, the message box with title "Adobe Reader:AcroRd32.exe - Application Error", and the message box contents are "Could not open a file mapping". Reader window does not even show. When I click OK, the program terminates.
What can I do to fix this error?
I have a Windows 7 x64 installed.
Update: Uninstalled, rebooted once again, reinstalled reader, now all works. Thread can be closed.
Update2: After a hour of successful usage, I closed the Reader and then tried to open it again. Same problem with "Could not open a file mapping". Any suggestions?

Repair via ARP is go to Add Remove Programs and select Adobe Reader, You will find two options highlighted one is repair and other is remove.
From there you can Click on repair and click on next. It will repair your Reader install if there is some file missing.
What are the other applications you have installed on your PC?

Kaffeine-1.0pre1 : could not open media source

Hi,
The new kaffeine using Qt4 has an issue when trying to play a video file or DVB-T:
"Could not open media source"
DVB-T channel scanning works perfectly. I guess there is a problem with the video output. Am I missing some dependency ?
Thanks.

had the same error. but i fixed it after googling for a long time
install phonon-xine restart X/ reboot whatever!
best regards
Last edited by arch0r (2009-08-15 09:05:12)

Could not open the editor: The editor class could not be instantiated.

Yesterday FlashBuilder was automatically updated for Adobe updater and now Flashbuilder shows an error: "Could not open the editor: The editor class could not be instantiated. This usually indicates a missing no-arg constructor or that the editor's class name was mistyped in plugin.xml."
Bellow some lines of log error:
java.lang.NoClassDefFoundError: com/adobe/flexbuilder/codemodel/common/IMXMLConstants
at com.adobe.flexbuilder.mxml.editor.MXMLEditor.<init>(MXMLEditor.java:120)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java: 39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorIm pl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
at java.lang.Class.newInstance(Class.java:308)
at org.eclipse.core.internal.registry.osgi.RegistryStrategyOSGI.createExecutableExtension(Re gistryStrategyOSGI.java:170)
at org.eclipse.core.internal.registry.ExtensionRegistry.createExecutableExtension(ExtensionR egistry.java:874)
at org.eclipse.core.internal.registry.ConfigurationElement.createExecutableExtension(Configu rationElement.java:243)
at org.eclipse.core.internal.registry.ConfigurationElementHandle.createExecutableExtension(C onfigurationElementHandle.java:51)
at org.eclipse.ui.internal.WorkbenchPlugin.createExtension(WorkbenchPlugin.java:259)
What is wrong!!!
I can't work without him!!!

Just had this problem occur as well.
All the workspaces seem to now have the Flash Player Icons on the menu. They were not there before.
If I create a new workspace, it seems to work fine until I switch to any existing workspace and then the new workspace is also affected.
I can import a project from the other workspaces, into a new workspace and that works as well.
My only mental history is that all was well. Then I spent some time writing a project in CS4 for a day without any need for Flex Builder. Then when I returned to FLex Builder the last opened project would not run and although I can get to the new project screen, the next and Finish button although enabled fail silently.
Eclipse Galieo, Flash 4 Builder Plugin.
Not sure what path to take. Remove Flex Builder plugin? Exclipse? Certain files or hidden folders?
Any suggestions where to explore would be nice.

Could not open key: UNKNOWN\Components\DA42BC89BF255BD0AF18C3B9B1A1EE8\0DC8CB51B56A0D742ADD098A4295 F08A

I am using Windows 7 and I can not install Quicktime 7 on my pc. I am running the installation as Administrator.
This is the error message I receive.
QuickTime 7 Installation Error
Could not open key:
UNKNOWN\Components\DA42BC89BF255BD0AF18C3B9B1A1EE8\0DC8CB51B56A0D742ADD098A4295F 08A.
Verify that you have sufficient access to that key, or contact your support personnel.
I think I'm missing something in the Reg. files? I'm missing something.
Thank you for your help.
Trim49

https://discussions.apple.com/docs/DOC-3581
https://discussions.apple.com/message/25363960#25363960

Error: -3, tried registry "classes" fix, now get 1402 Could not open key

I tried to upgrade itunes and I get an error when quicktime installs. The error is: Error: -3, followed by itunes cannot run because some of its required files are missing. I followed the registry "classes" permission fix and tried to install a stand alone version of quicktime. I then get a 1402 error Could not open key
hkeylocalmachine\software\microsoft\windows\currentversion\uninstall\quicktime. I checked the registry and indeed that key is missing. I am unable to add the key, but I thought I could try the same "classes" permission trick but I get a security error "unable to save permission changes on quicktime", "access is denied". I am logged on as administrator but I cannot save these changes. Any suggestions?
Windows XP

I tried to upgrade itunes and I get an error when quicktime installs. The error is: Error: -3, followed by itunes cannot run because some of its required files are missing. I followed the registry "classes" permission fix and tried to install a stand alone version of quicktime. I then get a 1402 error Could not open key
hkeylocalmachine\software\microsoft\windows\currentversion\uninstall\quicktime. I checked the registry and indeed that key is missing. I am unable to add the key, but I thought I could try the same "classes" permission trick but I get a security error "unable to save permission changes on quicktime", "access is denied". I am logged on as administrator but I cannot save these changes. Any suggestions?
Windows XP

Quicktime Error 1402 Could not open key (defaulticon)

When trying to install Quicktime 7 (standalone) I get the same error I have seen posted by so many others....Error 1402 Could not open key....
HKEY LOCAL MACHINE\SOFTWARE\CLASSES\QUICKTIME.QT\DEFAULTICON
I have tried every suggestion by Apple, Microsoft, the discussion fourm, and everything I have found via a Google search.
When I use regedit to view the permissions for the Quicktime.qt folder (it's not expandable so I can't locate a defaultIcon folder), I can add new users (everyone) and give them full permissions but when I select OK I get a message that says "Unable to save permissions on quicktime.qt...Access is denied).
(I am the only computer user and I am using the administrator account).
Note XP home addition.
Thanks
Anybody have any (new) ideas??????????

What happens when you delete the registry key or all the keys associated with QT?
This Microsoft article though claiming not to be for XP or 2000, has something interesting to say under Cause.
http://support.microsoft.com/kb/303089/en-us
After removing any program I clear out the registry of left over keys from it. Just something I do. I find I can still miss some. This program Windows XP Manager is very good at finding what I miss, and can also defrag the registry. It will also back up the registry for you also. You might want to take a look at it, where you problem seems to stem from the registry.
http://www.winxp-manager.com/xpmanager/index.html
Scroll down to Cleaner in the link on XP Manager, it explains what it does in the registry.

Pacman --sync: could not open sync database: extra

I'de like to install packages from the extra repository.
So I tried:
pacman --sync
This told me:
error: could not open sync database: extra
have you used --refresh yet?
So I did this.
But still pacman --sync tells me the same.
I have
Include = /etc/packman.d/extra
in /etc/pacman.conf.
What else is missing?

ozar wrote:
twelvegates wrote:
I have
Include = /etc/packman.d/extra
in /etc/pacman.conf.
Don't know that this is the problem but you have a spelling error in your code line.
Pacman doesn't have a "k" in it.
Oh, yes. I have made the error when a copied it. But in the config file it is in fact without 'k'.
Include = /etc/pacman.d/extra
So this is not the problem.

Could not open include file "math.h"

I installed Sun ONE 7.0 on Solaris 8, and write a simple program to test it.
#include <list>
using namespace std;
int main(int argc, char* argv[])
list<char *> ll;
#CC test.cc
But the error occurs:
"/sysadm/c7.0/SUNWspro/prod/include/CC/std/math.h", line 9: Error: Could not open include file "math.h".
I cannot find "math.h" in /usr/include, but can find it in following directory
/sysadm/c7.0/SUNWspro/prod/include/CC/Cstd/rw/math.h
/sysadm/c7.0/SUNWspro/prod/include/CC/std/math.h
/sysadm/c7.0/SUNWspro/prod/include/CC/stlport4/math.h
Do I missing any library and configuration?
Appreciate any help.

I installed Sun ONE 7.0 on Solaris 8, and write a
simple program to test it.
#include <list>
using namespace std;
int main(int argc, char* argv[])
list<char *> ll;
#CC test.cc
But the error occurs:
"/sysadm/c7.0/SUNWspro/prod/include/CC/std/math.h",
line 9: Error: Could not open include file "math.h".
I cannot find "math.h" in /usr/include, but can find
it in following directory
/sysadm/c7.0/SUNWspro/prod/include/CC/Cstd/rw/math.h
/sysadm/c7.0/SUNWspro/prod/include/CC/std/math.h
/sysadm/c7.0/SUNWspro/prod/include/CC/stlport4/math.h
Do I missing any library and configuration?It looks like you didn't do a full install (or else removed some packages).
/usr/include/math.h is part of SUNWlibm
A bientot
Paul

[SOLVED] error: could not open file /var/lib/pacman/local/qt-4.5.2-4/

Hi all,
So there I was, running pacman -Syu on all my Arch machines, and I get to my desktop PC at work, and half way through X decides to crash and kick me back to the CLI. Fair enough
Now when I try and use pacman, I get a whole bunch of errors about a missing 'depends' directory:
root ~ # pacman -S amarok
resolving dependencies...
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
looking for inter-conflicts...
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
error: could not open file /var/lib/pacman/local/qt-4.5.2-4/depends: No such file or directory
It still asks me to continue with installing the new package, but I'd rather get this fixed first in case it buggers it up worse
Last edited by fukawi2 (2009-07-30 05:44:25)

Once again my saviour Allan -- I had to -Sf it due to file already existing, but seems to be good now

FCP 7 could not open bec of missing HDV (1440x1080) 30p

Similar Messages

Maybe you are looking for