FCP 7 is supposed to work with AVC Intra 50 and 100.... BUT

Ok this one is very strange. You can log AVC Intra 100 (from a Panasonic P2 HD cam) in its native AVC Intra 100 format.... but here comes the great puzzle....
There is no Setting in the Sequence Settings drop down menu to match that??????? Did Apple forget to put that specifik codec there or what?
So what you get is a Sequence that has to be ProRes but your footage is AVC Intra...
OK you lost me on this one....

Yes Codec wise the MXF files are an I-frame H264 MPEG 4 compression - but that is not what I uppose against.
Its Apple banging the big drum saying, that now FCP 7 works naitivly with AVC Intra both 50 and 100.
AND.... thats NOT true. Anyhow... its not logical that you dont have a Apple AVCIntra codec choise in your sequence settings.
YES I know to set the Sequence settings for ProRes... But that I have done for 2 years now and had to wait for FCP to transcode the AVCIntra MXF files to ProRES....
Now I have to wait for my sequence to render all the time, and I dont think thats a great trade off - more like a pain in the but

Similar Messages

Wifi not working with iTunes, apps store and some, but not all Internet sites....why???

Yesterday I noticed while browsing Internet that some sites would not open and that some games I regularly play would not open. I also found that I could not open either the apps store or iTunes. Everything seemed to be working the day before and I have not recently upgraded ios (been on version 6.1.3 for a while) or changed any settings on my iPad (2). With Internet research today I found suggestion that if I switched to 3G I would be able to access these apps and,sure enough, under 3G connection everything works fine. Some other forums suggest changing wifi router settings to fix the issue ....I have not tried this as I wouldn't like to mess with my router and end up effecting other peripherals/pc's connected to it that are working fine....especially when I am not terribly IT savvy when it comes to hardware settings. But as I haven't changed anything on my ipad why would my wifi suddenly stop connecting to some apps on my iPad, but not all??? Interestingly I can access many Internet sites (forums) with wifi connection but not the apple forum! To get to anything apple related I have to switch back to 3G ....that includes checking the iOS version I am on via settings!
I also mention that I have done all the other suggested fixes found on various forums, such as rebooting iPad, renewing wifi lease, clearing cookies, closing all apps etc etc, to no avail. Seems the only suggested fix I have not tried is mucking around with my router which I am very hesitant to do given the **** I went through with my telco when my home Internet connection suddenly stopped working last year. Took me weeks of phone calls to get my internet connection back and being forced by the telco to a more expensive plan, hence very reluctant to start mucking around with that side of things, but why should I need to when it does seem to be working ok with other devices in the home?
I have started this as new discussion as, even though I am not terribly IT savvy, I cant see how this could be related to the wifi issues that many on the newer devices (iPhone 5 and iPad mini etc) are reporting as I haven't recently upgraded anything on my ipad and all was working perfectly up until yesterday.
Any other suggestions on how to get wifi working correctly again on iPad or do I really have to risk the working of every other device in my home and chase it from modem/router side?

Hi there,
You mentioned that you have tried a few troubleshooting steps already, but you may want to take a look at the article below, specifically the section titled "If you are unable to access the Internet while connected to a Wi-Fi network"
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Hope that helps,
Griff W.

How are we supposed to work with the new motion tweens if there's no motion editor anymore?

How are we supposed to work with the new motion tweens if there's no motion editor anymore? Without motion editor we can't see what kind of keyframes are set and we can't set any accelerations anywhere. Does Adobe now want us to go back and use the old motion tweens?

Hi All,
Flash Pro CC 2014 (v 14.0.0.110) is now available for download via the Creative Cloud App.
We have included an all new Motion Editor along with several other new features with this release of Flash Pro. The new Motion Editor is completely redesigned, intuitive and easy to use while preserving the core functionalities and backward compatibility with Flash CS6
To Invoke the Motion Editor, simply Double-Click on your Motion Tween span on Timeline (or Right-Click and select 'Refine Motion') and the Motion Editor opens up in-context in the Timeline itself. Double-Click again to collapse once you have made your adjustments.
Complete list of New features in Flash Pro CC 2014 is available at these links:
Overview:         https://www.adobe.com/in/products/flash.html
Whats new:      https://helpx.adobe.com/flash/using/whats-new.html
Release Notes: https://helpx.adobe.com/flash/release-note/flash-professional-cc-2014.html
Videos:           https://helpx.adobe.com/in/flash.html
Thanks,
Nipun

Audio unstable with AVC-INTRA

I'm working with Premiere Pro CS4, with the last update 4.2.1 in a PC with Windows XP Professional and with the last driver of AVC-INTRA.
When my project is open with AVC-INTRA files (AVC-I 50 1080i50), the two channels of audio changes at a little time and then only I monitoring one channel for the rest of time. Always, when I starting Premiere it's all right. But in a little bit of time, when I edit, for example, or change to another screen of windows, when I return, I only hear one channel of audio by the two speakers. After rendering, the final project it's all right with original two channels. I have installed Premiere in another PC (with windows 7 x64) and the problem is the same. First it's perfect but in two minuts I can't hear two channels. This files, in P2 Viewer from Panasonic, are all right always. The problem is only in Premiere Pro. Any suggestion?

Jeff,
my procedure is:
1.- Format
2.- Install Windows
3.- Install Windows updates
4.- Instal Premiere
5.- Activate
6.- Install Adobe Updates

Suport with AVC-Intra

We’ve recently acquired a Panasonic P2HD HPX300 camera and we’re having problems while editing with AVC-Intra coded.
We have a BlackMagic Design Multibridge Pro installed on a 4GB Quad Core system running a 64bit Windows OS.
When we build a project without BlackMagic, Premier reads the codec perfectly and we can even playback without the need of rendering.
But when we run BlackMagic for TV output, it doesn’t work even if the project is rendered. Right after pressing Play, the movie stops.
Is there anyone here who had similar problems and knows any solution?
Thank you.

Jeff,
my procedure is:
1.- Format
2.- Install Windows
3.- Install Windows updates
4.- Instal Premiere
5.- Activate
6.- Install Adobe Updates

I changed my sim on my iPhone n reconfigured iMessage, it configured with my number but when i sign in with my apple id it says username/password is wrong while in all other things like FaceTime, App Store it worked with the same id and password

i changed my sim on my iPhone n reconfigured iMessage, it configured with my number but when i sign in with my apple id it says username/password is wrong while in all other things like FaceTime, App Store it worked with the same id and password..
can anyone help me to solve this issue

i just opened my ipad, started my apple account/I.D. and realized I put the wrong e mail. I was having trouble correcting my I.D on the Ipad so I went to my laptop and make the proper changes/slash e mail address I wanted for my apple ID. I got back to my ipad and try to download an app I can't because I have to sign in my apple account and I can't because it still has the irrelivant I.D/email address..
So, i did what you said.. went to setting>app store> tapped on my e mail.. it asked me to sign in (with my invalid emails address showing). I signed in with the password I had created. It said "incorrect".. I went to reset password. I reset password, tried to sign in and it says again "unvalid password".. this is getting irritating. I have been asking and no one knows what to do.

Only one of my earbuds on my bose headphones works with my ipad, iphone and macbook- if I hold them there the right earbud will work, but for the life of me, I can't get them to both work. Why is this? And is Apple doing anything about this?

Only one of my earbuds on my bose headphones works with my ipad, iphone and macbook- if I hold them there the right earbud will work, but for the life of me, I can't get them to both work. Why is this? And is Apple doing anything about this? While Apple's headphones have (finally) admittedly gotten better of late, I still prefer the much more comfortable headphones & sound quality that Bose makes and that I spent the money for.

Bose Product Support

Is it possible to configure Time Capsule to work with Time Machine (MBP) and Genie Timeline (PC)

I have an Apple Time Capsule (2TB) and I need to configure it to work with my MBP and Time Machine and also back up my a PC with Genie Timeline Pro 2013 (or any other suggested PC back up software).
Setting it up to work with Time Machine is simple enough but the PC access is proving to be difficult.
http://www.genie9.com/support/KB/KnowledgeArticle.aspx?KBID=198
I followed the above steps but still can't connect to the network drive. I have reformatted the TC and will be walking through the steps again. My concern is that the two different operating systems (Win8 and Mavericks) can't share the same destination drive.
I have created two user accounts with drive sharing activated. One in my name for my MBP and the other in the name of my partner for her Dell laptop.
Should the Time Capsule be partitioned? Can it even be partitioned? When I use Drive Utility it can't see the TC. The only way to connect to it seems to be via Airport Utility.
On a seperate note the TC Router Mode is set to OFF (Bridge Mode). I have connected it to the ADSL modem/router (WiFi Off) via the WAN port. All seems to be well. Am I loosing any useful functionality by doing this?
The internet settings are set Connect Using DHCP. I have no issues but I am not really sure what it means and if I should be using other settings. The ADSL modem/router seems to have all the PPP0E settings.
The WiFi on the TC has been set up with a 5Ghz and 2.4Ghz network as well as a Guest Network. I then plan to introduce 2 Airport Express (MB321LL/A). One will be an access point for AirPlay and the other a wireless extender with AirPlay.
There is also a Canon WiFi printer that accesses the 2.4Ghz network. It has an Ethanet port so I am wondering if I should disable the wifi connection and cable it and if so to the TC or the DSL modem/router.

Lion, 7.6.1 firmware and iCloud offers remote access.
http://www.apple.com/au/support/icloud/back-to-my-mac/
To do it without the iCloud service your issue is static public IP address.. if you have one this is simple to the point of trivial. If not it is very hard, as Apple did not put in a standard dynamic DNS service.. (ensuring you were roped into their cloud accounts). Static IP from your ISP is the best solution.. if it is possible go for it.
Then the actual protocol for access is AFP, so the only device you can do this on is a Mac.
Do you have the TC as the main router?
If you want any other kind of access, or to avoid icloud use vpn.. which teamviewer is a kind of.. but buy a real vpn router, and bridge the TC.. you can then vpn into your network with full security and get windows access via smb..

Hi all, i can't sync over wifi between my iPhone 4 and Windows 7 64 bit, wifi sync works with the same phone and my Windows 8 machine, tried solutions from other threads with no luck, just thought i'd see if anyone else had any ideas, thanks.

Hi all, i can't sync over wifi between my iPhone 4 and Windows 7 64 bit, wifi sync works with the same phone and my Windows 8 machine so the problem seems confined to Windows 7. I've tried solutions from other threads -
Making sure everything is allowed through firewall
Rebooting phone/laptop/router
Disabling ipv6
Disabling all networks except the one curently on
Re-installing iTunes
Restoring iPhone
No luck with any of those unfortunately so i just thought i'd see if anyone else is still without wifi sync after trying those as well and if you ever found a fix, thanks.

I just wanted to leave a note that it's working now. I'm not sure if it was the latest iTunes update that got it working or that i decided to start a new library instead of using the one i had backed up on Windows 8 (it didn't occur to me to check using the old library when i re-installed iTunes). But if anyone is having this problem, it might be worth trying again with a new installation of iTunes to see if the latest update works for you, and if not, try using a fresh library instead of a backup (by fresh library i mean discard your old library completely and start a new library, not just restore as new iPhone, a whole new library).

HT1338 Presently running mac osx 10.5.8. Recent Firefox update says it no longer works with osx 10.5 and it's no longer supported by apple. Any suggestins?

Presently running mac osx 10.5.8. Recent Firefox update says it no longer works with osx 10.5 and it's no longer supported by apple. Any suggestins?

Use an earlier version of Firefox, use Safari, or upgrade to a later version of OS X. Any Intel Mac can run Snow Leopard.
Latest version of Safari for Leopard: http://support.apple.com/kb/DL1422
Information for Firefox: http://support.mozilla.org/en-US/kb/firefox-no-longer-works-mac-os-10-4-or-power pc
http://support.mozilla.org/en-US/kb/firefox-no-longer-works-mac-os-x-10-5

Lync Server 2010 conference not working with Windows 8.1 and IE 10

Hello,
The problem is that whenever a Windows 8.1 user tries to join a Lync server 2010 conference using Internet Explorer 10 (or 11, tried that too) the user can't join the conference. If the conference is created by a Lync server 2013 user joining works fine.
When using Lync 2010 client we get the following error in the client: "error id 87 source id 7".
When using Lync 2013 client we end up with a blank conversation window.
There are no traces in server log, client log or event log.
Below is a set of use cases that may help you to understand what is the problem scenario. Each of these works or does not work with both Lync 2010 and Lync 2013 client.
- Lync server 2010 conference, windows 7, Chrome, Firefox, IE 10 or 11 --> Works.
- Lync server 2010 conference, windows 8.1, IE 10 or 11 --> Does not work.
- Lync server 2010 conference, windows 8.1, Chrome or Firefox --> Works.
- Lync server 2013 conference, windows 8.1, Chrome, Firefox, IE 10 or 11 --> Works.
It does not help to add the meet address to IE compatibility list (Compatibility View Settings).
If i press F12 in IE and change the document mode of the meet page to IE 9 version then i can join meetings with Windows 8.1 and IE 10. Unfortunately i cannot make that as a default setting for the meet website.
Any ideas on how to get Lync server 2010 meetings working with Windows 8.1 and IE 10 or 11?
IE is the company default browser. Windows 8.1 is not a default operating system but we have increasing number of Windows 8.1 computers in our environment (mainly directors).

According to your description, it is hard to tell whether the issue is related with IE or Lync Server 2010 or both.
Compare the log when Lync client on Window 8.1 with IE 10 or IE 11 join Lync server 2010 conferencing and Lync Server 2013 conferencing.
Lisa Zheng
TechNet Community Support

HT3669 Hi I have a Konica Minolta PagePro 1300W printer. This works with my Windows-based Toshiba laptop but not with my i-Mac. Can someone please advise me how I get the printer to work with my i-Mac? I have installed it but documents don't print. Thanks

Hi I have a Konica Minolta PagePro 1300W printer. This works with my Windows-based Toshiba laptop but not with my i-Mac. I have the latest (Mountain Lion 10.8.2) OS-X software.
I have installed the printer using 'System Preferences' on my i-Mac and it appears on the list of available printers but documents that I create just don't print.
Can someone please advise me how I get the Konica Minolta PagePro 1300W printer to work with my i-Mac?
Thanks, John Lee

Looking at the Konica web site for the PagePro 1300W, I saw the following note.
Please note: This printer is designed to be used in computer operating systems running MS Windows only. Operating systems such as UNIX, Macintosh, or Linux are not supported nor do we have workaround drivers available. Older MS Windows versions, such as Windows 3.1/95/98[pre-SE] and NT 3.51/4.0, are not supported.
So KM are not going to help you. But the LinuxFoundation does provide a workaround that should allow you to print. Have a look at this web page. You will need to install all three packages as per the instructions from that page.

ITunes tells me, that I need to load version 11.1 in order to load a backup into my iPhone 5. I'm working with a windows PC and want to update my phone to iOS 7GM. version 11.0.5 is the highest I can get for windows. Can somebody help me?

iTunes tells me, that I need to load version 11.1 in order to load a backup into my iPhone 5. I'm working with a windows PC and want to update my phone to iOS 7GM. version 11.0.5 is the highest I can get for windows. Can somebody help me?

I'm assuming you followed a forum like Gizmodo to load the latest version of iOS 7 Beta on your device
Alot of those forums forget to mention, iTunes 11.0.5 will allow you to update to the iOS 7 Beta but your device will no longer work unless you have the developer version of iTunes as well....
I'd suggest you to research how to downgrade back to 6.1.3/4 and wait a few days for the iOS to be released,

I have been using the Firefox feature in which I could have multiple sets of tabs open but see only the set I was working with. I updated and now feature is gon

I have been using the Firefox feature in which I could have multiple sets of tabs open but see only the set I was working with. I updated and now feature is gone. I had a small icon on the upper right side of my toolbar. I used it all the time to keep separate windows for news, financial items, travel plans, etc. Has this been removed from Firefox?

Hi,
The [https://support.mozilla.org/en-US/kb/tab-groups-organize-tabs Tab Groups] feature is still present. You can try to right-click the + after the last tab and [https://support.mozilla.org/en-US/kb/how-do-i-customize-toolbars Customize]. If the icon is hidden behind another, or if it's available inside the Customize mini window, you can place it back. If the problem persists, you can also try to '''Reset toolbars and controls:''' and '''Make Changes and Restart''' [https://support.mozilla.org/en-US/kb/Safe%20Mode Safe Mode] start screen.

Reader X : Wrong Fonts (was working with Reader\Pro 9 and Pro 10)

Hi all,
First : this form pdf work with adobe Reader 9 and Acrobat Pro 9\X
i did a pdf form with scribus, i embed 2 fonts : 3of9barcode and freemono bold fonts.
(compatibility PDF 1.5 (acrobat 6) )
My client update to Reader X and the problem is that the fonts are 'squares' and the barcode is text not barcode.
When i do look at the properties in reader X, it founds the embedded fonts. There is no error when opening it.
no console errors or Reader error.
If i open the document with Pro X , there is no problem, the fonts are good. i try to save a copy, an optimized copy, or a copy with limited rights,
but the result is the same, when i open the pdf with Reader X the fonts are bad.
i tried ton install the fonts on Windows but it does not help...
Do you have any clue ???

I have exactly the same problem!!!
I create and layout my forms in scribus and adjust them in Adobe 9 Pro. Setting the tab order and having the possibility to make fillable forms saveable are gorgeous. However, people who use ReaderX cannot work with these very forms anymore because there appears only squiggly squary rubbish in the fillable form fields instead of nice and clean Times Now Roman font. In Reader 9 everything worked fine. I cannot force everybody to go back to version 9, in order to be able to work wth the forms.
It's so annoying, please help.

FCP 7 is supposed to work with AVC Intra 50 and 100.... BUT

Similar Messages

Maybe you are looking for