FCP 7 lost sequence after exporting - auto save vault not working

I started a project a couple of days ago. Today I worked from 11.00 - 20.00 hrs. I exported at 20.00 hrs. to compressor (i got a self contained compressed .MOV file out of that pffff)
But then, returning to FCP 7, the sequence I exported (and worked on all day) was completely empty. Everything in the project folder is still there, but the cuts / edits in the main sequence i worked on are all gone.
Inside the Auto Save Vault are only four saves from between 11.00 - 11.30 hrs. (not properly every 5 min.) and one from 20.00 hrs. The one from 20.00 hrs. is a version that also has the empty sequence. The whole afternoon FCP 7 seems to have made no auto saves, even though i set the Auto Save Vault to "every 5 min." in the preferences. Auto Save Vault files (of this same project) from a couple of days earlier are all there inside the Auto Save Vault folder.
Tried already: Looked inside the other two locations where i have autosave folders of other projects but the files were not there either.
Had a Tiff in the sequence, and a couple of very simple text-motion things.
Can anybody tell me whats going on?
And if there is a way to retrieve?
Never had this before, is this a FCP7 Yosemite issue?
Thanks in advance!

could be a yosemite issue. Hard to know. fcp was never meant to work in Yosemite, so it's hit or miss.
Autosave misbehavior can happen and resetting your fcp preferences usually solves the problem. Digital Rebellion makes a great utility to reset your preferences (and it's free).
www.digitalrebellion.com

Similar Messages

AUTO SAVE DOES NOT WORK !!!!!!!!!!!!!!!!!!!!!!!!!!!

I have a 1 week old mac book pro.
I am running the latest issue of FCP X.
Auto save does not work !
I just lost some work after shutting down and restarting the program.
Apple for gods sake dont release a program that doesnt perform the basics.
And give us back the ability to save projects when and where we want !
FFS !

Will Power PT wrote:
I have a 1 week old mac book pro.
I am running the latest issue of FCP X.
Auto save does not work !
I just lost some work after shutting down and restarting the program.
Apple for gods sake dont release a program that doesnt perform the basics.
And give us back the ability to save projects when and where we want !
FFS !
Apple knows best... except when they don't.
Send your request to Apple by using Feedback.

Auto-Save did not work... Any way to back up my project?

Hello,
I started a project this morning, a set of interviews shot on Canon 5DII. The footage is about 4 hours. One of the settings was to auto-save every 20min to maximum 5 versions. After about 14 hours of work Premiere just crashed. I got the gray screen and the message to hold down the power button of my mac. After restart I opened the project and the time-line looks exactly how I left it at the lunch brake. Since than I saw several times the auto-save performed, definitely more than 5.
Anybody experiencing same problem? Any way to back up my project? I'm desperate, tomorrow afternoon the interviews must be online on several sites.
Thank you.

That said...I have never heard of PPRo Auto saves .".saving projects all the same and to old to be used"
Neither have I.
I cannot find the thread I recall fairly recently regarding how auto-save is operating. But I believe it was demonstrated that auto-save will save even if edits have not been made. So, for example, with preferences of saves every 5 minutes to a max of 5 could produce a bunch of saves all the same. (They wou ld not be "too old," however.
Hunt recently linked to an article (http://forums.adobe.com/thread/477920?tstart=60) he put in the PE forum that includes this at the end:
* It has come to my attention that as of PrPro CS3, things have changed with Auto-Save. One does not need to do an initial Save to start Auto-Save, but if left Open, though no editing is being done, the Auto-Save will keep on overwriting the files at the set interval, say every 5 mins.. What this means is that if you leave a Project Open for 25 mins., have the number of Auto-Saves at the default of 5 and the default of every 5 mins., you will have 5 copies of the same Project file. I do not know what Adobe was thinking here, as Auto-Save should not be active, if no editing is being done. I often have a Project Open, but am working in PS, AI, or Encore, so there is no editing being done in PrPro, but there soon will be. I do not want all previous Auto-Saves being overwritten with the same exact file. With PrPro CS3 or higher, I strongly recommend that one does a lot more Save_As and Save_As_a_Copy, than in previous editions, or they might be in for a rude surprise, if they went to lunch, or just left the Project Open for a half-hour.
See that - and the moral of the story? Don't EVER go to lunch before your project is finished!

Auto save is not working

There is some problem after upgrade to Lion, Auto save version is not working in Iwork and anyone can fix it please advised. T.T

I have experienced projects not being auto save back-uped, and linked that to file structure problems (like I moved the project from the folder where it originally was created, or I changed the folders name where the Pr project was residing after starting it. I think that these things can lead the Auto-Save to get confused sometimes. This can also happen in Ae as well.
I have gotten used to making a duplicate of the project every day or at junctures of major change in the finder. The Mac finder duplicates the project file with the added word "copy" so I know that it isn't the original project file. I then add the date and time to the end of the file name _yymmdd_hh and send a copy to another drive.
It's too bad that there is no option in Pr to have it save the Auto-Saves to different drive than where the original is.
I also use a droplet created with a Mac renaming utility called "Name Mangler". Here is the macro for the advanced area of the re-namer in case anyone is interested.
[concatenate
<name>,
"_", [modified "%y%m%d_%H"],".", <extension>
I just drop the project file onto the droplet and it gets appended with its modification date.

How to Save When So-called auto-save Does NOT Work?

iPhoto is supposed to save work, eg, titling photos, organizing, adding keywords, automatically. Thus, can't save. Great concept. BAD IDEA, BECAUSE WHEN EVERYTHING ISN'T PERFECT. CAN'T SAVE WORK.
Lately iPhoto has been crashing for me lately. Everytime the work of labelling, etc. is lost. This has happened up to 3 times for same batch of photos. But I can not save work as I go, even though I try, try, try.
Is there a way to save. I really HATE to say this, but Apple apps are becoming more and more like Windows, which always assumes that it knows what you want to do.

HI Alfred,
Can you paste the command here so that we could verify the command and let you know what might be wrong.
Also try to run the same command in the database end and verify whether it is retrieving all teh data as you expect.
Regards,
Vinay

When I try to startup Final Cut Pro 7 a prompt says a specific auto save vault. Does not allow program to open. Help

When I try to startup Final Cut Pro 7 a prompt says a specific auto save vault. Does not allow program to open. Help

Use this free tool to trash FCP preferences: http://www.digitalrebellion.com/prefman/

After installing lion, my screen saver does not work

I installed lion, now my screen saver does not work. I have tried all the hot corners, nothing. Dashboard and mission control work fine but cannot start screen saver.
Any thoughts on what might be wrong.

kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
com.symantec.kext.internetSecurity (1.3.2f5)
com.symantec.kext.pf (4.2.1f7)
com.symantec.kext.ips (3.2f8)
at.obdev.nke.LittleSnitch (2.4.0)
com.symantec.kext.filesecurity (1.4.3f19)
com.symantec.kext.fw (1.0.3f5)
com.symantec.kext.SymAPComm (11.2.2f3)
#2:
Password:
com.wdc.drivemanagerservice
com.symantec.symSchedDaemon.plist
com.symantec.symdaemon
com.symantec.sharedsettings
com.symantec.Sched501-3.plist
com.symantec.Sched501-2.plist
com.symantec.Sched501-1.plist
com.symantec.navapdaemonsl
com.symantec.navapd
com.symantec.MissedTasks.plist
com.symantec.diskMountNotify.plist
com.symantec.deepsight-extractor
com.symantec.avscandaemon
com.microsoft.office.licensing.helper
com.adobe.versioncueCS3
at.obdev.littlesnitchd
#3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
com.symantec.uiagent.application
com.epson.epw.agent
at.obdev.LittleSnitchUIAgent
at.obdev.LittleSnitchNetworkMonitor
uk.co.markallan.clamxav.freshclam
uk.co.markallan.clamxav.clamscan
com.macpaw.CleanMyMac.helperTool
com.google.keystone.user.agent
com.adobe.ARM.ad895013aeb33ea6e968d9fdc06c0eb42c7c2a5229d98d64ad002716
#4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta} * L*/Fonts 2> /dev/null
/Library/Components:
iGlasses.component
/Library/Extensions:
/Library/Frameworks:
.dat1bf4.00c
AECore.framework
AEProfiling.framework
AERegistration.framework
AudioMixEngine.framework
Compressor.framework
DSPPublishing.framework
EWSMac-GC.framework
EWSMac.framework
FxPlug.framework
HPDeviceModel.framework
HPPml.framework
HPServicesInterface.framework
HPSmartPrint.framework
MediaServerAPI.framework
Motion.framework
NyxAudioAnalysis.framework
PluginManager.framework
PrintMeSSL.framework
ProFX.framework
ProMetadataSupport.framework
Qmaster.framework
TSLicense.framework
XSKey.framework
/Library/Input Methods:
/Library/InputManagers:
Ecamm
/Library/Internet Plug-Ins:
Flash Player.plugin
Flip4Mac WMV Plugin.plugin
Google Earth Web Plug-in.plugin
JavaAppletPlugin.plugin
NPSVG3.zip
NPSVG3Carbon
NPSVG3ReadMe.html
Quartz Composer.webplugin
QuickTime Plugin.plugin
RealPlayer Plugin.plugin
SharePointBrowserPlugin.plugin
SharePointWebKitPlugin.webplugin
Silverlight.plugin
flashplayer.xpt
iPhotoPhotocast.plugin
nsIQTScriptablePlugin.xpt
/Library/Keyboard Layouts:
/Library/LaunchAgents:
at.obdev.LittleSnitchNetworkMonitor.plist
at.obdev.LittleSnitchUIAgent.plist
com.epson.epw.agent.plist
com.symantec.uiagent.application.plist
/Library/LaunchDaemons:
at.obdev.littlesnitchd.plist
com.adobe.versioncueCS3.plist
com.apple.aelwriter.plist
com.apple.qmaster.qmasterd.plist
com.apple.remotepairtool.plist
com.microsoft.office.licensing.helper.plist
com.symantec.MissedTasks.plist
com.symantec.Sched501-1.plist
com.symantec.Sched501-2.plist
com.symantec.Sched501-3.plist
com.symantec.avscandaemon.plist
com.symantec.deepsight-extractor.plist
com.symantec.diskMountNotify.plist
com.symantec.navapd.plist
com.symantec.navapdaemonsl.plist
com.symantec.sharedsettings.plist
com.symantec.symSchedDaemon.plist
com.symantec.symdaemon.plist
com.wdc.drivemanagerservice.plist
/Library/PreferencePanes:
Apple Qmaster.prefPane
Flash Player.prefPane
Flip4Mac WMV.prefPane
SymantecQuickMenu.prefPane
VersionCue.prefPane
VersionCueCS3.prefPane
/Library/PrivateFrameworks:
SymAVScan.framework
SymAppKitAdditions.framework
SymBase.framework
SymConfidential.framework
SymDaemon.framework
SymFirewall.framework
SymIPS.framework
SymIR.framework
SymInternetSecurity.framework
SymPersonalFirewall.framework
SymScheduler.framework
SymSharedSettings.framework
SymSubmission.framework
SymUIAgent.framework
SymUIAgentUI.framework
SymWebKitUtils.framework
/Library/PrivilegedHelperTools:
com.microsoft.office.licensing.helper
/Library/QuickLook:
GBQLGenerator.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
AppleAVCIntraCodec.component
AppleHDVCodec.component
AppleIntermediateCodec.component
AppleMPEG2Codec.component
AppleProResCodec.component
DVCPROHDCodec.component
DVCPROHDMuxer.component
DVCPROHDVideoDigitizer.component
DVCPROHDVideoOutput.component
DVCPROHDVideoOutputClock.component
DVCPROHDVideoOutputCodec.component
DesktopVideoOut.component
DivX 6 Decoder.component
FCP Uncompressed 422.component
FLV.component
Flip4Mac WMV Advanced.component
Flip4Mac WMV Export.component
Flip4Mac WMV Import.component
IMXCodec.component
LiveType.component
Motion.component
iChatTheaterPreview.component
/Library/ScriptingAdditions:
Adobe Unit Types
Adobe Unit Types.osax
SymWebKitUtilsSL.osax
/Library/Spotlight:
GBSpotlightImporter.mdimporter
Microsoft Entourage.mdimporter
Microsoft Office.mdimporter
iMovie.mdimporter
iWeb.mdimporter
iWork.mdimporter
/Library/StartupItems:
AdobeVersionCue
/etc/mach_init.d:
/etc/mach_init_per_login_session.d:
/etc/mach_init_per_user.d:
Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle
Library/Fonts:
ATBas
ATBraIro
ATBroScr
ATChe
ATIsa
ATMcCol
ATRap
ATUnc
Arial
Basque, etc.
Branding Iron, etc.
Brush Script
ClearGotBolDTC
ClearGotExtBolDTC
ClearGotLHBla
ClearGotLHBol
ClearGotLHLig
ClearGotLHMed
ClearGotLHRom
ClearGotMTBol
ClearGotMTDemBol
ClearGotRegDTC
ClearITCbyBTBla
ClearITCbyBTBlaIta
ClearITCbyBTBol
ClearITCbyBTBolIta
ClearITCbyBTCon
ClearITCbyBTHea
ClearITCbyBTHeaIta
ClearITCbyBTReg
ClearITCbyBTRegIta
Clearface Bd BT
Clearface Blk BT
Clearface BlkIt BT
Clearface Ctr BT
Clearface Gothic A
Clearface Rg:Hv BT
Clearface.ttf
ClearfaceGothic ExtraBold DTC
ClearfaceGothic Regular DTC
ClearfaceGothicLH Bold
Clearface_Gothic_MT_Bd MT
Clearface_Gothic_MT_Dm_Bd MT
Clearly Gothic Light.ttf
Clearly Gothic.ttf
EmbasBTReg
Embassy BT
FIRESTARTER.TTF
FLAMER.TTF
Firecat.ttf
Flame.ttf
Flames.ttf
Redd Or Dedd.ttf
SEAWFA__.TTF
Smokteq.ttf
Times New Roman
Verdana
Wingdings
Wingdings 2
Wingdings 3
chp-fire.ttf
encodings.dir
fonts.dir
fonts.list
fonts.scale
scythe.ttf
Library/Frameworks:
EWSMac-GC.framework
Library/Input Methods:
.localized
Library/Internet Plug-Ins:
Move-Media-Player.plugin
WebEx64.plugin
Library/Keyboard Layouts:
Library/LaunchAgents:
com.adobe.ARM.ad895013aeb33ea6e968d9fdc06c0eb42c7c2a5229d98d64ad002716.plist
com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.B6A794DC-82A7-47AB-9171-208 B8AEB5B61.plist
com.apple.SafariBookmarksSyncer.plist
com.google.keystone.agent.plist
com.macpaw.CleanMyMac.helperTool.plist
com.zeobit.MacKeeper.Helper
uk.co.markallan.clamxav.clamscan.plist
uk.co.markallan.clamxav.freshclam.plist
Library/PreferencePanes:
MouseLocator.prefPane
#5
osascript -e 'tell application "System Events" to get name of every login item'
2012-03-17 18:58:32.172 osascript[669:8703] Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
osascript: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/Adobe Unit Types.osax" declares no loadable handlers.
I hope I copied these correctly.

After acceessing home screen with assistive touch auto lock is not working in my iphone 4S after upgrading to ios6

After acceessing home screen with assistive touch auto lock is not working in my iphone 4S after upgrading to ios6

Additional testing i perform to make wifi work but nothing works out:
i did re-installing the software using iTunes, reset the network settings restarting the phone. Nothing solves my problem.
wifi was working with older software versions. i think there should be a problem with 8.1.1.
is anyone has fix for this issue?

Auto brightness does not work after upgrade from iOS5 to iOS6 on my iPod touch. Is this intended by Apple, or is it a bug?

I attempted to ask this question, yesterday. However, I am not used to typing with my thumbs, yet, and messed it up some. So, I will give this another try. Auto brightness does not work after upgrade from iOS 5 to iOS 6 on my iPod touch. Is this intended by Apple, or is it a bug?

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
iOS 6 changed how that feature works.

Do Auto Save and Version work for Office for Mac-documents?

Do Auto Save and Version work for "Office for Mac 2011"-documents?

No, just certain Apple apps right now. Preview, iWorks, textedit come to mind. Anything else?

HT4623 Iphone 4s auto lock is not working after updating ios6

my Iphone 4s auto lock is not working after updating ios6 i restore 3 times but still geting problem

Hello, Chirag25.
Thank you for visiting Apple Support Communities.
I understand that you are having an issue with the back camera. Here is a troubleshooting article that I would recommend going through. If none of the troubleshooting steps resolve the issue, see step 4.
Get help with the camera on your iPhone, iPad, or iPod touch
http://support.apple.com/en-us/HT203040
Cheers,
Jason H.

Envy x2 auto-rotate does not work, after upgrading to windows 10. And touchpad gestures

I have installed the latest HP Support Assistant for windows 10 and I have installed the updates Intel Virtual Button DriverHP System Event Utility Updates failed to install without giving reason: Intel Serial I/O driver Intel Management Engine Interface (MEI) Driver In display settings I have checked the box of "Allow the screen to auto-rotate" In Windows Update I have updated with Update for Microsoft Windows (KB3074678)Update for Microsoft Windows (KB3074676)Update for Microsoft Windows (KB3081424) In Device Manager under Sensors HID Sensor Collection V2, working properlySdo Sensor V2, working properly I have done deleting these devices and reinstalling them In User Account I have created a new user with password. Auto-rotate did not work in that user But all these have not worked. Please find a solution for me. About the TouchPad gesture: swipping inside from the left use to switch app, now does not work.swipping inside from the right use to bring out charm bar/ action centre, now does not work

Yes. I found the answer here:http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/HP-Envy-x2-13-j020CA-Windows-10-Auto-Rotate-Autorotate-now/m-p/5212887#M115445I've tried replacing the driver on Sdo Sensor V2 device with the Simple Device Orientation Sensor and rotation works just like it did on 8.1.For the record - Sdo Sensor v2 reports the device orientation continiously, and Simple Device Orientation Sensor reports it only when the orientation changes. Must be a Windows bug then.

Auto-Deployment is not working in Eclipse - Weblogic

I have created weblogic server instance in Eclipse.Then, I have added one project into weblogic server by using "Add/Remove Projects" menu.After I start the server , I logged into admin console and checked the deployments link. I am not finding the project listed in the list.I have selected option "Run stand alone web module directly from work space" in web logic server configuration window in eclipse.
I am using Eclipse 3.3 and weblogic 10.0.
I have no idea, why auto-deployment is not working.
I would appreciate your help on this regard.I have contacted Eclipse Support, they have asked me to contact BEA team.
Thanks,
Prakash.A

Hi Prakash,
The "Run standalone web module from workspace" doesn't publish the application to the server (instead the app is deployed to a temp location).
This is mainly to help test the app during the development stages. If your app is complete and would like to publish to the server then you might want to try the following option
- In Server View, double click on the configuration to launch Overview
- Select "Copy stand-alone web module into separate deployment folder"
- Save the configuration
- Start the server
The application would be deployed to the server as a WAR file.

Upgraded to 8.3, now auto fill is not working. I have checked, rechecked my info, saved passwords, etc. to no avail. Is this bug in 8.3. Never did this until I upgraded.

Upgraded IPad to to 8.3, now auto fill is not working. I have checked, rechecked "my info", "saved passwords", etc. to no avail. Is this bug in 8.3. Never did this until I upgraded. Wife is not happy I upgraded!

Auto fill works for me in iOS 8.3.
Try the standard troubleshooting steps in this order:
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds). No data will be lost.
Restore: Connect your device to iTunes on your computer, backup, and then select Restore to Factory.
See here for more details on restore: https://support.apple.com/en-us/HT201252
If none of these work your device may have developed a hardware problem. Contact Apple Support: http://www.apple.com/contact/

Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls

Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

FCP 7 lost sequence after exporting - auto save vault not working

Similar Messages

Maybe you are looking for