FCP 7 noob needs help - Unrendered in Canvas
Hello
I am totally new to FCP and my knowledge of video editing goes as far as iMovie.
I have imported some .mov files into FCP.
I drag into Viewer, mark it and then Drag it into the "insert" in the canvas.
When i play back on timeline, the Canvas shows a blue screen with Unrendered" on it.
I have no idea what t do...have searched forums and found a couple of the same but
didnt quite get what was being discussed so any help from you experts would be great!
Thanks.
I have imported some .mov files into FCP.
What format? And don't say ".mov" because that is only a container that can hold all sorts of CODECS. Select the file and hit CMD-I and see what the codec is.
Now, that being said, FCP is a PROFESSIONAL editor, meant to work with professional level formats, and some consumer ones. For a full list of what formats are supported, look in the EASY SETUP list. Stuff you download from the web WILL NOT work. H.264, MPEG-4, MPEG-2, AVI...nada. Gotta convert.
That being said...
Shane's Stock Answer #28: When I put a clip in the timeline, I have to render it before it will play. Why?
Your clip settings MUST match your timeline settings. If you have DV/NTSC material, you need a DV/NTSC timeline. The frame rate, audio rate and dimensions (4:3, 16:9) all need to match exactly. In Final Cut Pro 6, this is easy, because when you drop a clip into the timeline, it asks if you want to set up the timeline to match the settings of the first clip you drag into it. Click YES and you are ready to go.
However, in FCP 5.1 and earlier, it is a bit trickier.
The most important thing you need to do is properly set up your project from the start, and the best way to do this is to choose a setting from the Easy Setups, located under the Final Cut Pro menu.
Once you do this, you’ll need to create a new sequence. This is because the sequence that is already in your new project is setup for the typical default setting of DV/NTSC, or for the settings of your last project, which might not match what you are currently working with. So delete SEQUENCE 1 and create a new sequence.
This new sequence will contain the settings you chose in the Easy Setup menu, and should match the format you captured.
Shane
Similar Messages
-
Noob Needs Help! Please Please Please Help!
MD doing reserach on Genetic Mutations, I really need help on this, I have never used PL/SQL. Can somebody help me with this?
I have a view made of mulitple table that has following columns: diagnosis, patient_id, kindred_id, column_d, colum_e.... column_p where each distinct combination of column_d to column_p means one specific mutation. I want to group patients who have same mutation to find out the following:
for each mutation(unique column d through column p), I want to find out how many families have diagnosis 1, diagnosis 2, diagnosis 3...
The rule is the program will look at kindre_id first, to see if this person's kindre_id has been looked at. If
so, jump it/ignore it. If this kindred_id has never been looked at, treat it as a unique family. Diagnosis count for that diagnosis will then increase by 1. Sounds easy, but I don't know how to write that for loop that will do for each unique (column d, column c, ... column p) do the following... Does such a thing exist?Hi,
SELECT diagnosis
, COUNT (DISTINCT kindred_id) AS family_cnt
, column_d
, column_e
, column_f
FROM table_x
GROUP BY diagnosis
, column_d
, column_e
, column_f
; produces this output:
DIAGNOSIS FAMILY_CNT COLUMN_D COLUMN_E COLUMN_F
1 2 abc bca acb
2 2 abc bca acb
3 2 abc bca acbwhich is the data you want, but not in the format you want. You want to pivot the family_cnt column from the three rows into three columns in one row. For general information about how to this, search for "pivot" on this or similar sites.
One solution is:
SELECT COUNT (DISTINCT CASE WHEN diagnosis = 1 THEN kindred_id END) AS diagnosis_1
, COUNT (DISTINCT CASE WHEN diagnosis = 2 THEN kindred_id END) AS diagnosis_2
, COUNT (DISTINCT CASE WHEN diagnosis = 3 THEN kindred_id END) AS diagnosis_3
, column_d
, column_e
, column_f
FROM table_x
GROUP BY column_d
, column_e
, column_f
; which produces the following output:
DIAGNOSIS_1 DIAGNOSIS_2 DIAGNOSIS_3 COLUMN_D COLUMN_E COLUMN_F
2 2 2 abc bca acbThis technique assumes that you know exactly how many different diagnoses there are and what the distinct values of the diagnosis column are. (I.e., in this example, I knew that that there were three diagnosie and that their values were 1, 2 and 3. I used that information to write three COUNT expressions, with values 1, 2 and 3 hard-coded into them.)
So, what can you do if you do not know the diagnosis values? The columns have to be hard-coded into the query, so how can you possiblly write something today that will have all the values that are in the table next month? You can't, but you can write something today that you can run (unchanged) next month which will write such a query. In other words, you can do dynamic SQL, where you run a preliminary query to get the different diagnosis values, write an appropriate query similar to the one above, and then run that newly-created query. The PL/SQL command "EXECUTE IMMEDIATE" can help with this.
The code above works in all versions of Oracle. In Oracle 11, there is a more straigtforward way of specifyng PIVOT in a SELECT statement. -
Uber Noob Needs Help Creating website!
I need help creating my webpage: It has a textbox on it were
the user enters a URL and it then redirects the end user to that
URL when they press the GO Button. It also has a check box saying
"Hide my IP", If the end user clicks this box and then clicks go
they will be directed to the website they stateted in the Textbox
but this time it shall mask there IP Address so they can bypass
proxys and surf anonomosly. Please can someone give me some HTML
code i could use for this site or a Link to a website that can give
me the code.I assume the application is connecting to Oracle using an application ID/password. If so, check to see if that user has a private synonyn to the table. If so drop it since you have a public synonym.
Verify that the public synonym is in fact correct. Drop and recreate the public synonym if you cannot select against the synonym name using an ID that can perform select * from inhouse.icltm where rownum = 1. That is if this other user cannot issue select * from icltm where rownum = 1 without an error.
Check that the application ID has the necessary object privileges on the table.
Queries you need
select * from dba_synonyms
where table_owner = 'INHOUSE'
and table_name = 'ICLTM'
You may find both public and private synonms. Either fix or delete. (Some may reference someelses.icltm table if one exists)
select * from dba_tab_privs
where table_name = 'ICLTM'
and owner = 'INHOUSE'
Note - it is possible to create mixed case or lower case object names in Oracle by using double quotes around the name. Do not do this, but do look to see that this was not done.
You could also query dba_objects for all object types that have the object_name = 'ICLTM'
HTH -- Mark D Powell -- -
[Athlon64] Noob needs help optimizing new system
Sorry to post yet another thread, but I've been lurking for the past few days and I only get bits and pieces of what I need. I'm pretty clueless about this stuff as it's my first home-built system
See my sig for system info...
I'm needing help with bios settings. The pertinent stuff (I think - hopefully I got it all down):
CELL MENU
CPU Clock speed: 2200
DDR Memory Freq: 100.0 MHz
High performance mode: Manual
Cool n quiet: Disable
HT Freq: 800 MHz
Dynamic overclocking: Disable
Adjust CPU Ratio: Auto
AGP Freq: By Default
HT Voltage: Auto
Mem voltage: Auto
CPU voltage: Auto
AGP Voltage: Auto
Spread sectrum: Disable
DRAM
DRAM Clock Mode: Manual
Mem clock value: DDR200
CAS Latency: SPD
Burst Length: 8 Beat
Bank Interleaving: Auto
Active to CMD (Trcd): SPD
Active to precharge (Tras): SPD
Precharge to active (Tvp): SPD
DRAM IT Timing: Disable
ADVANCED CHIPSET FEATURES
AGP Mode: Auto (this is "greyed out")
AGP Fast write: Enabled
AGP Aperture size: 128
VLink 8X supported: Enabled
My questions mainly concern memory. I bought all this stuff at the Tiger Direct outlet store in Naperville, Illinois. I had intended to buy the K8T Neo-FSR (754 pin), but they were supposedly out of the 754 pin 3400+, and this board/CPU combo had a $100 rebate. Yeah, it's one of those deals with the odd 939 pin 3400+ that everyone has been talking about.
In any case, I already had the Corsair CMX512-3200C2PT picked out, as Corsair said it was compatible with the board. I wasn't aware of the MSI compitibility chart until I came here later that night. I STILL can't find that chart off of the MSI web site.
Anyway, I got it all hooked up and got the standard 4 red LEDs. Not knowing what to do, I took it back to Tiger Direct and the tech played around with it until he stuck an el-cheapo stick (Corsair VS512MB400) in there and it worked. But it only works in slot 2. So here I am.
I started to run memtest86, but it took too long to run and I aborted it for now. For what it's worth, it said the RAM CAS value is 2.5-2-2-5. I don't know what the hell that means, but I know it's important.
My questions:
1. I assume I need manually to set my memory clock value to DDR400?
2. Now that I can get the thing to post, is there any chance I could get the "good" Corsair memory to work by setting the correct latency/CAS values? Again, I don't know what I'm talking about, so forgive my ignorance. What I'm wondering is if I can set everything to what Corsair recommends while I have the cheap memory in there and then replace it with the good stuff?
3. With this board, am I better off with double-sided or single-sided sticks? As I said, I went into the store intending to buy the Neo 754-pin board, but they were out of the Athlon 3400+ in 754 and only had the 939 pin.
4. Anything else in my bios settings that stand out and need to be addressed? I want to make sure everything is optimized.
EDIT: I almost forgot: My CPU temp is runing around 42-49 degrees. Am I in the danger zone? I just bought a generic cooler for now and intend to get a Thermalright XP-120, but I can't find it locally, so it will have to wait.
AND FINALLY...
I don't know if this is related to anything above, but I have been having a hell of a time getting the 6600GT to run DirectX9+ games. The latest drivers for Windows 98SE was 66.94. Yes, XP will be installed soon, but for now... It was failing on dxdiag test for Direct3d 9 and also the third DirectDraw test. I was about to give up and take it back when I discovered that a new beta driver came out today (71.84). I installed it and it passed all of the dxdiag tests. I thought I was in hawg-heaven, but when I run Call of Duty (the only DX9 game I have besides HL2), it slows to an absolute clawl. The level starts out somewhat normal at first, but quickly slows down to the point that performance can only be measured in seconds per frame! All of the patches 1.5 and 1.51 for UO have been installed, but that shouldn't make a bit of difference.
If I don't get my CoD fix soon I'm gonna reinstall that Geforce3.
Thanks much and sorry again for such a long post.Thanks everyone for the recent replies, but I started this thread almost a month ago (March 3rd), and much has changed since then.
New PSU (see sig).
Replaced the PNY Geforce6600GT with a eVGA 6800
Added another stick of the Corsair Value Select 512 RAM. I didn't even bother trying to get the "primo" CMX stick to work. I just returned it.
Went from Windows 98SE to XP Home.
The PSU did nothing for me at all, but I suppose it's better to have some headroom in the amperage.
The biggest performance booster was the additional 512MB of RAM. It wouldn't have done me any good in 98SE, but I was shocked at how much it helps XP. Quitting a game is almost instant now, where before it would take a good two minutes or so for XP to recover itself.
As for games running slow, the 6800 fixed it right up. CoD absolutely screams now, as does everything else I've thrown at it (HL2, Doom 3, Far Cry). I think the 6600GT was just bad or there is a serious driver problem with the 6600GT's. Went from 3DMark03 score of around 5000 (when it didn't crash) to above 9000 now. And this was all before adding the additional RAM.
Oh yeah, I bought a 74GB Raptor. No RAID for now though. So far I'm not real impressed with the performance. I'm running off of the VIA controller, since my board doesn't have the Promise controller. I don't see much improvement in loading times as compared to the 40GB 7200rpm Maxtor I have running on IDE1. The only time it beats the pants off the Maxtor is defragging. But there's only so much entertainment value in that. The Sandra "file system benchmark" gave me 57 MB/s, which seems pathetic, but I've read some posts here where others are getting an identical rate.
And I'm not too happy to discover, too late, that my overclocking capabilities are severely limited while using SATA.
I do have one more question for now:
When I installed the second 512MB stick, I originally had both sticks in slot 1 and 2. I ran Sandra's memory bandwidth benchmark and got a much lower score than with the single stick (around 3500 MB/s). WHen I had the sticks in 1 and 3, it jumped up to close to 6000 MB/s. Why is that? Just curious. -
Noob needs help: DrWeb-DAEMON - A message has not been checked due to licen
I keep getting these emails (see below). Can someone please tell me what part of the email system is generating these emails? Are they normal? They seem to be blocking mostly spam (which is good) but, there is some email that is being blocked that I would like to come through. How would I unblock certain email? If you need any logs or such posted, please let me know.
Thanks in advance for and help and sorry for being such a noob.
From: DrWeb-Daemon
Subject: A message has not been checked due to license limitations
Dear Postmaster,
the message with following attributes has not been checked
due to the licenses limitation.
Sender = [email protected] (may be forged)
Recipients = [email protected]
Subject = Secret BEAD Sale! Ring in the New Year with Savings on...
Message-ID = <[email protected]ail.firemount aingems.com>
--- Dr.Web report ---
Dr.Web detailed report:
127.0.0.1 [30230] drweb.tmp.RYe7DB - message's envelope (addresses) aren't present in license (protected e-mail`s), skipped!
--- Dr.Web report ---DrWeb is an anti-virus software product.
It is not part of the standard Mac OS X system, and it doesn't appear to even have a Mac OS X version, therefore it isn't anything your server is doing.
The liklihood, then, is that your upstream mail server (maybe your ISP?) is using DrWeb to filter email. You'd need to talk to them about configuration options. -
Noob needs help: Macbook RAM/storage upgrade advice
Firstly, let me apologize in advance for my ignorance in this subject area! I'm a complete noob!
Here goes:
I have a MacBook 7,1 (MC516LL/A) with all original, factory components, and since I've upgraded to OS X 10.7.5, it's been running incredibly S...L...O...W... which is incredibly annoying to me:P
Out of the 250GB's of HD storage, I have about 91 free. From my previous experience with mac notebooks, I know that I am going to need to get some more hard drive space, soon (my last iBook turned to complete crap, once I got down to 20 gigs of available memory).
I see that I can upgrade the RAM from two, 1GB sticks to two, 4GB sticks. From the limited research I've done, I'm under the impression that only the boot-up speed will increase slightly (please correct me if any of this is wrong).
I've also been reading about Solid State Drives, found some reasonably priced ones on crucial.com, and they look/sound AWESOME! Aaaaaand the reality is that I really have no idea what I truly need. I'm a single mom and a college student, so I'm looking for an upgrade option in the $200-300 range, *and* I'm not into graphic design, web design, or anything that requires top of the line equipment.
My macbook is practically glued to my hands 24/7, so I just want it to run FASTER, and I need more storage. I don't know if this info is pertinent or helps, but outside of studying (all done with ebooks and online websites), I like to download a lot of music, watch videos, upload family pictures, browse the interwebz, etc., etc.
What can I do to improve speed and expand storage capacity?
Any help is GREATLY appreciated! Thanks!Hello! I own a mid-2010 MacBook (a.k.a MacBook 7,1) running OS X 10.8.2 Mountain Lion, which I use for school, and I had the exact same issues with my MacBook, before I upgraded it. I had almost filled up my MacBook's HDD and my computer's RAM was insufficient to perform any of my day-to-day tasks with ease. I upgraded the RAM from two sticks of 1GB (the factory-installed configuration) to one stick of 4GB, and I installed a 1TB HDD in place of the original 250GB HDD (my requirements were slightly different from what yours seem to be). Currently, my MacBook is a lot less laggy than it used to be (even with a HDD that's four times larger in terms of capacity installed), but it still takes a long time to start up and perform certain tasks. Therefore, from my experience, I would recommend that you do the following:
1. Get two sticks of 2GB (2x2GB) of RAM, not one stick of 4GB (1x4GB). Even though the latter will probably be considerably cheaper than the former, I think it's worth the few extra dollars to get the former because it's much faster than the latter. You shouldn't go for anything more than 4GB of RAM in total, because it'll overload your MacBook. Trust me, that's not something you want to have to deal with!
2. Get a 500GB or 512GB SSD, not a larger HDD. In hindsight, I don't think I even needed anything close to 1TB. I only purchased my huge HDD because it was on offer, and it was being sold (believe it or not) for less than a 500GB HDD. But if you're looking for speed, an HDD is not the way to go; they're much, much slower than SSDs, even though they're much cheaper.
You should see an exponential increase in the speed of your MacBook. You might want to try the following websites; they offer high-quality, affordable components and I've known people (including myself) who have used their products before.
1. Other World Computing - http://www.macsales.com
2. Crucial (of course) - http://www.crucial.com
3. Strontium - http://www.strontium.biz
4. RamJet, Inc. - http://www.ramjet.com
5. MacUpgrades - http://www.macupgrades.co.uk/store/index.php
6. Corsair (these guys can get a little pricey at times) - http://www.corsair.com/us/
7. Kingston - http://www.kingston.com/us/
8. Sandisk - http://www.sandisk.com
Good luck speeding your MacBook up, and I hope this helped! -
Noob needs help using/managing large font collection in os10
Hope this is the correct forum for this question. I'm a os10 noob starting at a new, small startup design-oriented biz (6-7 macs) that needs to manage fonts - 100s, over a 1000. Other places I've worked used Font Reserve and I'm familiar with that program but I never knew if it came with os10 or you had to go buy it, and if you needed to buy a separate copy for each computer?
I'm trying to help get this biz set-up, but I know NOTHING about font usage/set-up in os10. I've always used ATM Deluxe4.6 (os9) and have over 2000 fonts nicely arranged in sets (took me an entire day, way back when). Would love to transfer these arranged sets into os10, if possible.
Is there a built-in font mgmt in os10? Is it any good for large collections? Is Font Reserve a good program for large font collections?
I don't even know where os10 stores fonts or the right questions to ask. Pls point me in the right direction!
TIAFontbook is ok for dealing with a handful of fonts on an occasional basis, but for pro design work you should run, don't walk, to: http://www.linotype.com/fontexplorerX/
FontExplorerX beats the pants of any other font management tool I've used on the mac after many years of ATM, Suitcase & Font Agent Pro. FEX looks and feels like an "iTunes for Fonts" - it's fast, stable, clean and simple to use and best of all for a small biz (like me) - it's FREE! :O -
Noob Needs Help - Importing Html Pages into "My Site"
Greetings
I am sure this is a noob question that may have been asked, but I couldn't find it by searching so here goes.
I jumped right into Dream Weaver, following an online tutorial... and have a decent webpage but I must have skipped some steps or missed something and I would hate to backtrack and do it all over again...
When I began, I just started working on a HTML page... and now that its done, I want to make it a template etc...
But I never created a "site" as far as SITE > NEW SITE etc.
So now that I have, I need to tell DW that "These pages are included... these images are included, all that neat SPRY stuff I have done needs to be "in the site".
I am looking for a button that says, "Hey dummy, you need to select the pages that are included in your site" but can't find it...
Any help?
Thanks, in Advance
Greg
www.revfan.comCreating your first web site in DW CS5 -
http://www.adobe.com/devnet/dreamweaver/articles/first_website_pt1.html
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb -
Noob needs help with Logic and Motu live setup.
Hello everyone,
I'm a noob / semi noob who could use some help with a live setup using 2 MOTU 896HD's and Logic on a Mac.
Here's the scenario:
I teach an outdoor marching percussion section (a drumline and a front ensemble of marimbas and vibes). We have an amazing setup of live sound to amplify and enhance the mallet percussion. There is a yamaha PA system with 2 subs and 2 mains which are routed through a rack unit that processes the overall PA balance. I'm pretty sure that the unit is supposed to avoid feedback and do an overall cross-over EQ of the sound. Other then that unit, we have 2 motu896hd units which are routed via fire-wire. I also have a coax cable routing the output of the secondary box to the input of the primary box (digital i/o which converts to ADAT in (i think?)..?
Here's the confusion:
There are more then 8 inputs being used from the ensemble itself, so I need the 16 available inputs to be available in Logic. I was lead to believe that the 2nd motu unit would have to be sent digitally to the 1st motu unit via coax digital i/o. Once in Logic, however, I cannot find the signal or any input at all past the 8th input (of the 1st unit).
Here's the goal:
All of my performers and inputs routed via firewire into a Mac Mini running OSX and Logic pro.
I want to be able to use MainStage and run different patches of effects / virt. instruments for a midi controller keyboard / etc.
I want to be able to EQ and balance the ensemble via Logic.
Here's another question:
How much latency will I be dealing with? Would a mac mini with 4gb of ram be able to handle this load? With percussion, I obviously want the sound as latency free as possible. I also, however, want the flexibility of sound enhancement / modification that comes with Logic and the motu896hd units.
Any help would be REALLY appreciated. I need the routing assistance along with some direction as to whether or not this will work for this type of application. I'm pretty certain it does, as I have spoken with some other teachers in similar venues and they have been doing similar things using mac mini's / logic / mainstage / etc.
Thanks in advance,
ChrisYou'll definitely want to read the manual to make sure the 896HDs are connected together properly. ADAT is a little tricky, it's not just a matter of cabling them together. Go to motunation.com if you need more guidance on connecting multiple devices. Beyond that initial hookup, here are a couple of quick suggestions:
1. Open CueMix and see if both devices are reported there. If not, your connections aren't correct. Be sure to select 44.1kHz as your sample rate, otherwise you are reducing the number of additional channels. For instance at 88.2kHz you would get half the additional channels via ADAT.
2. You may need to create an aggregate device for the MacBook to recognize more than the first 896HD. Lots of help on this forum for how to do that. Again, first make sure you have the 896HDs connected together properly.
3. As for latency with Mainstage on the Mini, no way to know until you try it. Generally MOTU is fantastic for low latency work but Mainstage is a question mark for a lot of users right now. If the Mini can't cut the mustard, you have a great excuse to upgrade to a MacBook Pro. -
Java noob needing help - First applet won't compile
I'm trying to make a simple audio player applet for a web page. The basic way it works is: There are four buttons Play 1, Play 2, Play 3 and Stop, as well as a label for applet credits, a label for music credits and a label for the applet's current status.
This is the applet so far:
import java.applet.*;
import java.awt.*;
import java.awt.event.*;
import java.net.*;
public class wifflesaudio extends Applet implements MouseListener {
add(new Label("(applet credits"));
add(new Label("(music credits"));
Label labelDoing = new Label("Stopped");
Button buttonOne = new Button("Play 1");
Button buttonTwo = new Button("Play 2");
Button buttonThree = new Button("Play 3");
Button buttonStop = new Button("Stop");
add(buttonOne);
add(buttonTwo);
add(buttonThree);
add(buttonStop);
addMouseListener(this);
String clipName[] = {getParameter("clipOne"),
getParameter("clipTwo"),
getParameter("clipThree")};
AudioClip clipOne;
AudioClip clipTwo;
AudioClip clipThree;
int whichIsPlaying = 0;
public void loadClip(int clipNumber) {
switch (clipNumber) {
case 1:
if (AudioClip.clipOne == null) {
try {
labelDoing = "Loading clip 1...";
clipOne = Applet.newAudioClip(newURL(getCodeBase(), clipName[1]));
catch (MalformedURLException e) {
labelDoing = "WARNING: clip 1 didn't load";
if (clipOne != null) {
clipTwo.stop();
clipThree.stop();
clipOne.loop();
whichIsPlaying = 1;
break;
case 2:
if (clipTwo == null) {
try {
labelDoing = "Loading clip 2...";
clipTwo = Applet.newAudioClip(newURL(getCodeBase(), clipName[2]));
catch (MalformedURLException e) {
labelDoing = "WARNING: clip 2 didn't load";
if (clipTwo != null) {
clipOne.stop();
clipThree.stop();
clipTwo.loop();
whichIsPlaying = 2;
break;
case 3:
if (clipThree == null) {
try {
labelDoing = "Loading clip 3...";
clipThree = Applet.newAudioClip(newURL(getCodeBase(), clipName[3]));
catch (MalformedURLException e) {
labelDoing = "WARNING: clip 3 didn't load";
if (clipTwo != null) {
clipOne.stop();
clipTwo.stop();
clipThree.loop();
whichIsPlaying = 3;
break;
public void actionPerformed(ActionEvent evt) {
Button source = (Button)evt.getSource();
if (source.getLabel().equals("Play 1")) {
loadClip(1);
if (source.getLabel().equals("Play 2")) {
loadClip(2);
if (source.getLabel().equals("Play 3")) {
loadClip(3);
if (source.getLabel().equals("Stop")) {
clipOne.stop();
clipTwo.stop();
clipThree.stop();
Naturally, it doesn't work. When I try to compile it with javac I get 21 errors thrown back at me. Being the noob that I am I have absolutely no idea why it isn't working, so I'm turning to all you clever people for some advice. :)Think anyone's going to copy your code into their own machine and compile it to see those messages for you? Well I did. Since there are a zillion error messages, I think it's fair to help a little bit:
import java.applet.*;
import java.awt.*;
import java.awt.event.*;
import java.net.*;
// no need to implement MouseListener
// see below
public class wifflesaudio extends Applet {
Label labelDoing = new Label("Stopped");
Button buttonOne = new Button("Play 1");
Button buttonTwo = new Button("Play 2");
Button buttonThree = new Button("Play 3");
Button buttonStop = new Button("Stop");
String[] clipName;
AudioClip clipOne;
AudioClip clipTwo;
AudioClip clipThree;
int whichIsPlaying = 0;
// statements in JAVA must be located with methods or constructors
// here is the default constructor (with no param)
wifflesaudio() {
add(new Label("(applet credits"));
add(new Label("(music credits"));
add(buttonOne);
add(buttonTwo);
add(buttonThree);
add(buttonStop);
clipName = new String[3];
clipName[0] = getParameter("clipOne");
clipName[1] = getParameter("clipTwo");
clipName[2] = getParameter("clipThree");
addMouseListener(new wifflesaudioMouseListener()); // instead of addMouseListener(this)
public void loadClip(int clipNumber) {
switch (clipNumber) {
case 1:
if (clipOne == null) {
try {
// To set the text of a label, you must use setText() method.
labelDoing.setText("Loading clip 1...");
clipOne = newAudioClip(new URL(getCodeBase(), clipName[1])); // 'new URL' instead of 'newURL'
} catch (MalformedURLException e) {
// To set the text of a label, you must use setText() method.
labelDoing.setText("WARNING: clip 1 didn't load");
if (clipOne != null) {
clipTwo.stop();
clipThree.stop();
clipOne.loop();
whichIsPlaying = 1;
break;
case 2:
if (clipTwo == null) {
try {
// To set the text of a label, you must use setText() method.
labelDoing.setText("Loading clip 2...");
clipTwo = newAudioClip(new URL(getCodeBase(), clipName[2])); // 'new URL' instead of 'newURL'
} catch (MalformedURLException e) {
// To set the text of a label, you must use setText() method.
labelDoing.setText("WARNING: clip 2 didn't load");
if (clipTwo != null) {
clipOne.stop();
clipThree.stop();
clipTwo.loop();
whichIsPlaying = 2;
break;
case 3:
if (clipThree == null) {
try {
// To set the text of a label, you must use setText() method.
labelDoing.setText("Loading clip 3...");
clipThree = newAudioClip(new URL(getCodeBase(), clipName[3])); // 'new URL' instead of 'newURL'
} catch (MalformedURLException e) {
// To set the text of a label, you must use setText() method.
labelDoing.setText("WARNING: clip 3 didn't load");
if (clipTwo != null) {
clipOne.stop();
clipTwo.stop();
clipThree.loop();
whichIsPlaying = 3;
break;
public void actionPerformed(ActionEvent evt) {
Button source = (Button)evt.getSource();
if (source.getLabel().equals("Play 1")) {
loadClip(1);
if (source.getLabel().equals("Play 2")) {
loadClip(2);
if (source.getLabel().equals("Play 3")) {
loadClip(3);
if (source.getLabel().equals("Stop")) {
clipOne.stop();
clipTwo.stop();
clipThree.stop();
// Extending MouseAdapter instead of implementing MouseListener
// allows NOT to code ALL the methods from MouseListener
// MouseAdapter already implements MouseListener with empty methods
// You then just code the method(s) that is (are) needed.
class wifflesaudioMouseListener extends MouseAdapter {
}Please next time paste your code between code tags exactly like this:
[code]
your code
[/code]
Thank you -
NEED HELP: Problem with Canvas Size in Crystal design/report.
Hello,
I am having some trouble with one of my reports, the canvas size is so much bigger than my design/report, which is causing it to preview really small. I have gone into the document properties and tried to change those settings, I have also used the tools to try to make the canvas size smaller, it seems as thought nothing is really working. When I use those tools it cuts off part of my report and also adds huge scroll bars into my design... Does anyone have any insight on this? It would be a great help.
Thank you,
Kerry Jenkins
Harte-Hanks AnalystHi Kerry,
Are you using Crystal Reports Designer or BusinessObjects designer ( what ever it was called ) Crysstal Reports 5 was released in the summer of 1997 and definitely did not support a flash file.
Need more info and details on the versions you are using and info on the Clients portal, Is it Businessobjects Enterprise 5.1?
Thank you
Don -
100% Noob - Need Help for basic setup of Cisco 2504 and 1600 AP
Hello,
I am completely noob in (cisco) networking.
I have to setup a basic but secure wireless network.
I have a cisco 2504 and 2 APs 1600 + a random switch
I have 4 ports on the controller.
I want to keep the 1st port on the network for the controller management, plug my internet box on the 3rd port, and my switch on the 4th port. Then the AP will be on the switch.
I am able to make something working when everythings are plugged on the switch, plugged in the first port (default management port).But this is not what I want.
First thing, Is that possible ?
1st port : office network
2nd port : empty
3rd port : Internet Box
4th port : Switch + all APs
Then, if that is possible, how should i configure the controller to make that work ? I am completely lost in the menus.
I dont need a perfect configuration, just something simple and working.
1 SSID, 10 DHCP addresses, block wireless users trying to go on the office network.
If anyone could help my doing that, It would be very nice.
Thank you.You basically need two SSIDs one for corporate users and second for guests .check the link with step by step config and brief details .
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-vlan/70937-guest-internal-wlan.html -
hi guys.
i am having a lot of trouble here....
could you take a look at the log and point me in the right direction?
start-ups take 4 -5 minutes
computer won't restart
too much weirdness going on to list...
sorry this is so long --- but please help!
here goes
Dec 22 08:30:44 localhost kernel[0]: npvhash=4095
Dec 22 08:30:44 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
Dec 22 08:30:44 localhost com.apple.launchd[1] (org.cups.cupsd): Unknown key: SHAuthorizationRight
Dec 22 08:30:44 localhost com.apple.launchd[1] (org.ntp.ntpd): Unknown key: SHAuthorizationRight
Dec 22 08:30:44 localhost DirectoryService[11]: Launched version 5.5 (v514.23)
Dec 22 08:30:44 localhost kernel[0]: hi mem tramps at 0xffe00000
Dec 22 08:30:44 localhost kernel[0]: PAE enabled
Dec 22 08:30:44 localhost kernel[0]: 64 bit mode enabled
Dec 22 08:30:44 localhost kernel[0]: Darwin Kernel Version 9.5.0: Wed Sep 3 11:29:43 PDT 2008; root:xnu-1228.7.58~1/RELEASE_I386
Dec 22 08:30:44 localhost kernel[0]: standard timeslicing quantum is 10000 us
Dec 22 08:30:44 localhost kernel[0]: vmpagebootstrap: 971712 free pages and 76864 wired pages
Dec 22 08:30:44 localhost kernel[0]: migtable_maxdispl = 79
Dec 22 08:30:44 localhost kernel[0]: 96 prelinked modules
Dec 22 08:30:44 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
Dec 22 08:30:44 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
Dec 22 08:30:44 localhost kernel[0]: AppleACPICPU: ProcessorApicId=2 LocalApicId=2 Enabled
Dec 22 08:30:44 localhost kernel[0]: AppleACPICPU: ProcessorApicId=3 LocalApicId=3 Enabled
Dec 22 08:30:44 localhost kernel[0]: AppleACPICPU: ProcessorApicId=4 LocalApicId=6 Enabled
Dec 22 08:30:44 localhost kernel[0]: AppleACPICPU: ProcessorApicId=5 LocalApicId=7 Enabled
Dec 22 08:30:44 localhost kernel[0]: AppleACPICPU: ProcessorApicId=6 LocalApicId=4 Enabled
Dec 22 08:30:44 localhost kernel[0]: AppleACPICPU: ProcessorApicId=7 LocalApicId=5 Enabled
Dec 22 08:30:44 localhost kernel[0]: Loading security extension com.apple.security.TMSafetyNet
Dec 22 08:30:44 localhost kernel[0]: calling mpopolicyinit for TMSafetyNet
Dec 22 08:30:44 localhost mDNSResponder mDNSResponder-176.2 (Aug 15 2008 14:58:54)[15]: starting
Dec 22 08:30:44 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Dec 22 08:30:44 localhost kernel[0]: Loading security extension com.apple.nke.applicationfirewall
Dec 22 08:30:44 localhost kernel[0]: Loading security extension com.apple.security.seatbelt
Dec 22 08:30:44 localhost kernel[0]: calling mpopolicyinit for mb
Dec 22 08:30:44 localhost kernel[0]: Seatbelt MACF policy initialized
Dec 22 08:30:44 localhost kernel[0]: Security policy loaded: Seatbelt Policy (mb)
Dec 22 08:30:44 localhost kernel[0]: Copyright © 1982, 1986, 1989, 1991, 1993
Dec 22 08:30:44 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Dec 22 08:30:44 localhost kernel[0]: MAC Framework successfully initialized
Dec 22 08:30:44 localhost kernel[0]: using 16384 buffer headers and 4096 cluster IO buffer headers
Dec 22 08:30:44 localhost kernel[0]: devfsmakenode: not ready for devices!
Dec 22 08:30:44 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
Dec 22 08:30:44 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
Dec 22 08:30:44 localhost kernel[0]: mbinit: done
Dec 22 08:30:44 localhost kernel[0]: Security auditing service present
Dec 22 08:30:45 localhost kernel[0]: BSM auditing present
Dec 22 08:30:45 localhost kernel[0]: rooting via boot-uuid from /chosen: 227ABF9C-6D8B-3536-BEFB-39BC9C9CDCEA
Dec 22 08:30:45 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Dec 22 08:30:45 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT0 @0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDri ver/ST3320820AS_P Media/IOGUIDPartitionScheme/Customer@2
Dec 22 08:30:45 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
Dec 22 08:30:45 localhost kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 001ff3fffe23b388; max speed s800.
Dec 22 08:30:45 localhost kernel[0]: CSRHIDTransitionDriver::start []
Dec 22 08:30:45 localhost kernel[0]: CSRHIDTransitionDriver::switchToHCIMode legacy
Dec 22 08:30:45 localhost kernel[0]: U1Device:start
Dec 22 08:30:45 localhost kernel[0]: Jettisoning kernel linker.
Dec 22 08:30:45 localhost kernel[0]: AppleIntelCPUPowerManagement: initialization complete
Dec 22 08:30:45 localhost kernel[0]: Resetting IOCatalogue.
Dec 22 08:30:45 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:1f:5b:33:e7:d0
Dec 22 08:30:45 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:1f:5b:33:e7:d1
Dec 22 08:30:45 localhost kernel[0]: PXS1: family specific matching fails
Dec 22 08:30:45 localhost kernel[0]: Matching service count = 1
Dec 22 08:30:45 localhost kernel[0]: Matching service count = 2
Dec 22 08:30:45: --- last message repeated 4 times ---
Dec 22 08:30:45 localhost kernel[0]: P0P9: family specific matching fails
Dec 22 08:30:45 localhost kernel[0]: P9P2: family specific matching fails
Dec 22 08:30:45 localhost kernel[0]: P2P5: family specific matching fails
Dec 22 08:30:45 localhost kernel[0]: LAN0: family specific matching fails
Dec 22 08:30:45 localhost kernel[0]: LAN1: family specific matching fails
Dec 22 08:30:45 localhost kernel[0]: P2P3: family specific matching fails
Dec 22 08:30:45 localhost kernel[0]: P2P4: family specific matching fails
Dec 22 08:30:45 localhost kernel[0]: PXS3: family specific matching fails
Dec 22 08:30:45 localhost kernel[0]: pci-bridge: family specific matching fails
Dec 22 08:30:45 localhost kernel[0]: PBIF: family specific matching fails
Dec 22 08:30:45 localhost kernel[0]: AMAP: family specific matching fails
Dec 22 08:30:45 localhost kernel[0]: HDEF: family specific matching fails
Dec 22 08:30:45 localhost kernel[0]: RP03: family specific matching fails
Dec 22 08:30:45 localhost kernel[0]: FWBR: family specific matching fails
Dec 22 08:30:45 localhost kernel[0]: FRWR: family specific matching fails
Dec 22 08:30:45 localhost kernel[0]: RP04: family specific matching fails
Dec 22 08:30:45 localhost kernel[0]: UHC1: family specific matching fails
Dec 22 08:30:45 localhost kernel[0]: UHC2: family specific matching fails
Dec 22 08:30:45 localhost kernel[0]: UHC3: family specific matching fails
Dec 22 08:30:45 localhost kernel[0]: UHC4: family specific matching fails
Dec 22 08:30:45 localhost kernel[0]: EHCI: family specific matching fails
Dec 22 08:30:45 localhost kernel[0]: PCIB: family specific matching fails
Dec 22 08:30:45 localhost kernel[0]: LPCB: family specific matching fails
Dec 22 08:30:45 localhost kernel[0]: PATA: family specific matching fails
Dec 22 08:30:45 localhost kernel[0]: SATA: family specific matching fails
Dec 22 08:30:45 localhost kernel[0]: SBUS: family specific matching fails
Dec 22 08:30:45 localhost kernel[0]: NRP5: family specific matching fails
Dec 22 08:30:45 localhost kernel[0]: PXS1: family specific matching fails
Dec 22 08:30:45 localhost kernel[0]: NRP1: family specific matching fails
Dec 22 08:30:45 localhost kernel[0]: PXS2: family specific matching fails
Dec 22 08:30:45 localhost kernel[0]: pcif1d0,c0fe: family specific matching fails
Dec 22 08:30:45 localhost kernel[0]: PXS2: family specific matching fails
Dec 22 08:30:45 localhost kernel[0]: pci-bridge: family specific matching fails
Dec 22 08:30:45: --- last message repeated 1 time ---
Dec 22 08:30:45 localhost kernel[0]: pci8086,4036: family specific matching fails
Dec 22 08:30:45: --- last message repeated 1 time ---
Dec 22 08:30:45 localhost kernel[0]: pci8086,4035: family specific matching fails
Dec 22 08:30:45: --- last message repeated 1 time ---
Dec 22 08:30:45 localhost kernel[0]: pci8086,4031: family specific matching fails
Dec 22 08:30:45 localhost kernel[0]: pci8086,4030: family specific matching fails
Dec 22 08:30:45 localhost kextd[10]: 410 cached, 0 uncached personalities to catalog
Dec 22 08:30:45 localhost kernel[0]: pci8086,4030: family specific matching fails
Dec 22 08:30:45: --- last message repeated 1 time ---
Dec 22 08:30:45 localhost kernel[0]: pci8086,402f: family specific matching fails
Dec 22 08:30:45 localhost kernel[0]: pci8086,4003: family specific matching fails
Dec 22 08:30:45 localhost kernel[0]: Matching service count = 11
Dec 22 08:30:45 localhost kernel[0]: Previous Shutdown Cause: 5
Dec 22 08:30:45 localhost kernel[0]: pci-bridge: match category IODefaultMatchCategory exists
Dec 22 08:30:45 localhost kernel[0]: HDEF: family specific matching fails
Dec 22 08:30:45 localhost kernel[0]: pcif1d0,c0fe: family specific matching fails
Dec 22 08:30:45 localhost kernel[0]: NVDANV50HAL loaded and registered.
Dec 22 08:30:45 localhost kernel[0]: LPCB: family specific matching fails
Dec 22 08:30:45 localhost kernel[0]: Probing ...
Dec 22 08:30:45 localhost kernel[0]: comciprico_driverfulcrum::probe(pci1aa8,9)
Dec 22 08:30:45 localhost kernel[0]: Probing
Dec 22 08:30:45 localhost kernel[0]: comciprico_driverfulcrum::start(pci1aa8,9) <1>
Dec 22 08:30:45 localhost kernel[0]: Entering InitializeController
Dec 22 08:30:45 localhost kernel[0]: InitializeController, driver build Dec 16 2007 22:03:11
Dec 22 08:30:45 localhost kernel[0]: IOPCIMatch property is 127140928
Dec 22 08:30:45 localhost kernel[0]: bcelrond_pauseports:
Dec 22 08:30:45 localhost kernel[0]: bcraid card 0: Ciprico RC5252
Dec 22 08:30:45 localhost kernel[0]: bcraid: bceventkthread thread started
Dec 22 08:30:45 localhost kernel[0]: PXS1: family specific matching fails
Dec 22 08:30:50: --- last message repeated 1 time ---
Dec 22 08:30:50 localhost kernel[0]: Intel8254x -- Link Down -- 00:1f:5b:33:e7:d0 -- called by enableHardware() --
Dec 22 08:30:50 localhost kernel[0]: -- Auto-Negotiation Advertisement Register (04d) = 0xde1
Dec 22 08:30:50 localhost kernel[0]: -- Auto-Negotiation Link Partner Ability Register (05d) = 0x0
Dec 22 08:30:50 localhost kernel[0]: -- Auto-Negotiation Gigabit Advertisement Register (09d) = 0xe00
Dec 22 08:30:50 localhost kernel[0]: -- Auto-Negotiation Gigabit Link Partner Ability Register (10d) = 0x4000
Dec 22 08:30:50 localhost kernel[0]: -- PHY Specific Status Register (17d) = 0x8000
Dec 22 08:30:50 localhost com.apple.launchd[1] (com.apple.familycontrols): Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
Dec 22 08:30:50: --- last message repeated 1 time ---
Dec 22 08:30:50 localhost bootlog[44]: BOOT_TIME: 1229956240 0
Dec 22 08:30:50 localhost ajad[49]: ajad - AJA daemon starting up...
Dec 22 08:30:50 localhost ajad[49]: ajad - Copyright 2005-2008 AJA Video Systems, Inc. All rights reserved.
Dec 22 08:30:50 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[32]: Login Window Application Started
Dec 22 08:30:50 localhost rpc.statd[29]: statd.notify - no notifications needed
Dec 22 08:30:50 localhost fseventsd[37]: bumping event counter to: 0x3869f129 (current 0x0) from log file '000000003869987d'
Dec 22 08:30:50 localhost /usr/sbin/ocspd[63]: starting
Dec 22 08:30:51 localhost com.apple.launchd[1] (com.apple.familycontrols): Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
Dec 22 08:30:51 localhost kernel[0]: Intel8254x -- Link Up -- 00:1f:5b:33:e7:d1 -- called by interruptOccurred() --
Dec 22 08:30:51 localhost com.apple.launchd[1] (com.apple.familycontrols): Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
Dec 22 08:30:51: --- last message repeated 6 times ---
Dec 22 08:30:50 localhost ajad[49]: ajad - device found...
Dec 22 08:30:51 Macintosh-3 kernel[0]: -- Auto-Negotiation Advertisement Register (04d) = 0xde1
Dec 22 08:30:51 Macintosh-3 com.apple.launchd[1] (com.apple.familycontrols): Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
Dec 22 08:30:51 Macintosh-3 ajad[49]: ajad - initializeDevice
Dec 22 08:30:51 Macintosh-3 com.apple.launchd[1] (com.apple.familycontrols): Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
Dec 22 08:30:51 Macintosh-3 com.apple.IFCStart[35]: Mon Dec 22 08:30:51 Macintosh-3.local ifcstart[35] <Warning>: 3891612: (CGSLookupServerRootPort) Untrusted apps are not allowed to connect to or launch Window Server before login.
Dec 22 08:30:51 Macintosh-3 com.apple.IFCStart[35]: Mon Dec 22 08:30:51 Macintosh-3.local ifcstart[35] <Error>: kCGErrorRangeCheck : On-demand launch of the Window Server is allowed for root user only.
Dec 22 08:30:51 Macintosh-3 com.apple.IFCStart[35]: Mon Dec 22 08:30:51 Macintosh-3.local ifcstart[35] <Error>: kCGErrorRangeCheck : Set a breakpoint at CGErrorBreakpoint() to catch errors as they are returned
Dec 22 08:30:52 Macintosh-3 com.apple.IFCStart[35]: _RegisterApplication(), FAILED TO establish the default connection to the WindowServer, _CGSDefaultConnection() is NULL.
Dec 22 08:30:53 Macintosh-3 kernel[0]: -- Auto-Negotiation Link Partner Ability Register (05d) = 0x45e1
Dec 22 08:30:53 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 7 seconds
Dec 22 08:30:53 Macintosh-3 kernel[0]: -- Auto-Negotiation Gigabit Advertisement Register (09d) = 0xe00
Dec 22 08:30:51 Macintosh-3 ifcstart[35]: 3891612: (CGSLookupServerRootPort) Untrusted apps are not allowed to connect to or launch Window Server before login.
Dec 22 08:30:53 Macintosh-3 kernel[0]: -- Auto-Negotiation Gigabit Link Partner Ability Register (10d) = 0x4000
Dec 22 08:30:51 Macintosh-3 configd[14]: setting hostname to "Macintosh-3.local"
Dec 22 08:30:51 Macintosh-3 ifcstart[35]: kCGErrorRangeCheck : On-demand launch of the Window Server is allowed for root user only.
Dec 22 08:30:53 Macintosh-3 blued[69]: Apple Bluetooth daemon started.
Dec 22 08:30:53 Macintosh-3 kernel[0]: -- PHY Specific Status Register (17d) = 0x6f08
Dec 22 08:30:52 Macintosh-3 /usr/libexec/ifcstart[35]: _RegisterApplication(), FAILED TO establish the default connection to the WindowServer, _CGSDefaultConnection() is NULL.
Dec 22 08:30:51 Macintosh-3 ifcstart[35]: kCGErrorRangeCheck : Set a breakpoint at CGErrorBreakpoint() to catch errors as they are returned
Dec 22 08:30:54 Macintosh-3 kernel[0]: Intel8254X -- Negotiated Speed: 100 Mb/s, Duplex: Full, Flow Control: Receive Pause Enabled, Transmit Pause Enabled
Dec 22 08:30:52 Macintosh-3 configd[14]: AppleTalk startup
Dec 22 08:30:54 Macintosh-3 kernel[0]: USBF: 12.187 AppleUSBHubPort: Port 2 of Hub at 0x5d000000 about to terminate a busy device (IOUSBCompositeDevice) after waiting 10 seconds
Dec 22 08:30:53 Macintosh-3 ajad[49]: ajad - device successfully initialized.
Dec 22 08:30:54 Macintosh-3 kernel[0]: USBF: 12.490 CSRHIDTransitionDriver[0x766da80](IOUSBCompositeDevice) GetFullConfigDescriptor(0) returned NULL
Dec 22 08:30:54 Macintosh-3 kernel[0]: CSRHIDTransitionDriver... done
Dec 22 08:30:54 Macintosh-3 kernel[0]: MacDriver::SetDesktopDisplayModeImmediate - no desktop framebuffer
Dec 22 08:30:57 Macintosh-3 configd[14]: AppleTalk startup complete
Dec 22 08:31:00 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:31:25: --- last message repeated 2 times ---
Dec 22 08:31:25 Macintosh-3 kextd[10]: IOKitWaitQuiet() timed out waiting to write kernel symbols
Dec 22 08:31:30 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:31:35 Macintosh-3 kextd[10]: writing kernel link data to /var/run/mach.sym
Dec 22 08:31:41 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:31:45 Macintosh-3 configd[14]: InterfaceNamer: timed out waiting for IOKit to quiesce
Dec 22 08:31:45 Macintosh-3 configd[14]: InterfaceNamer: Busy services :
Dec 22 08:31:45 Macintosh-3 configd[14]: InterfaceNamer: MacPro3,1 [1]
Dec 22 08:31:45 Macintosh-3 configd[14]: InterfaceNamer: MacPro3,1/AppleACPIPlatformExpert [1]
Dec 22 08:31:45 Macintosh-3 configd[14]: InterfaceNamer: MacPro3,1/AppleACPIPlatformExpert/PCI0@0 [1]
Dec 22 08:31:45 Macintosh-3 configd[14]: InterfaceNamer: MacPro3,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI [1]
Dec 22 08:31:45 Macintosh-3 configd[14]: InterfaceNamer: MacPro3,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/P0P9@9 [1]
Dec 22 08:31:45 Macintosh-3 configd[14]: InterfaceNamer: MacPro3,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/P0P9@9/IOPCI2PCIBridge [1]
Dec 22 08:31:45 Macintosh-3 configd[14]: InterfaceNamer: MacPro3,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/P0P9@9/IOPCI2PCIBridge/P9 P2@0 [1]
Dec 22 08:31:45 Macintosh-3 configd[14]: InterfaceNamer: MacPro3,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/P0P9@9/IOPCI2PCIBridge/P9 P2@0/IOPCI2PCIBridge [1]
Dec 22 08:31:45 Macintosh-3 configd[14]: InterfaceNamer: MacPro3,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/P0P9@9/IOPCI2PCIBridge/P9 P2@0/IOPCI2PCIBridge/P2P4@1 [1]
Dec 22 08:31:45 Macintosh-3 configd[14]: InterfaceNamer: MacPro3,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/P0P9@9/IOPCI2PCIBridge/P9 P2@0/IOPCI2PCIBridge/P2P4@1/IOPCI2PCIBridge [1]
Dec 22 08:31:45 Macintosh-3 configd[14]: InterfaceNamer: MacPro3,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/P0P9@9/IOPCI2PCIBridge/P9 P2@0/IOPCI2PCIBridge/P2P4@1/IOPCI2PCIBridge/PXS3@0 [1]
Dec 22 08:31:45 Macintosh-3 configd[14]: InterfaceNamer: MacPro3,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/P0P9@9/IOPCI2PCIBridge/P9 P2@0/IOPCI2PCIBridge/P2P4@1/IOPCI2PCIBridge/PXS3@0/IOPCI2PCIBridge [1]
Dec 22 08:31:45 Macintosh-3 configd[14]: InterfaceNamer: MacPro3,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/P0P9@9/IOPCI2PCIBridge/P9 P2@0/IOPCI2PCIBridge/P2P4@1/IOPCI2PCIBridge/PXS3@0/IOPCI2PCIBridge/pci1aa8,9@8 [1]
Dec 22 08:31:51 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:32:21: --- last message repeated 2 times ---
Dec 22 08:32:21 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:32:41: --- last message repeated 1 time ---
Dec 22 08:32:41 Macintosh-3 com.apple.SystemStarter[27]: Starting Qmaster services
Dec 22 08:32:41 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:32:41 Macintosh-3 kernel[0]: csendinq: seq_num: 18 B/T/L 0/2/0
Dec 22 08:32:41 Macintosh-3 kernel[0]: bcsendinq: seq_num: 19 B/T/L 0/3/0
Dec 22 08:32:41 Macintosh-3 kernel[0]: bcsendinq: seq_num: 20 B/T/L 0/4/0
Dec 22 08:32:41 Macintosh-3 kernel[0]: bcsendinq: seq_num: 21 B/T/L 0/5/0
Dec 22 08:32:41 Macintosh-3 kernel[0]: bcsendinq: seq_num: 22 B/T/L 0/6/0
Dec 22 08:32:41 Macintosh-3 kernel[0]: bcsendinq: seq_num: 23 B/T/L 0/7/0
Dec 22 08:32:41 Macintosh-3 kernel[0]: bcsendinq: seq_num: 24 B/T/L 0/8/0
Dec 22 08:32:41 Macintosh-3 kernel[0]: bcsendinq: seq_num: 25 B/T/L 0/9/0
Dec 22 08:32:41 Macintosh-3 kernel[0]: bcsendinq: seq_num: 26 B/T/L 0/10/0
Dec 22 08:32:41 Macintosh-3 kernel[0]: bcsendinq: seq_num: 27 B/T/L 0/11/0
Dec 22 08:32:41 Macintosh-3 kernel[0]: bcsendinq: seq_num: 28 B/T/L 0/12/0
Dec 22 08:32:41 Macintosh-3 kernel[0]: bcsendinq: seq_num: 29 B/T/L 0/13/0
Dec 22 08:32:41 Macintosh-3 kernel[0]: bcsendinq: seq_num: 30 B/T/L 0/14/0
Dec 22 08:32:41 Macintosh-3 kernel[0]: bcsendinq: seq_num: 31 B/T/L 0/15/0
Dec 22 08:32:41 Macintosh-3 kernel[0]: bcinqcallback: target 0,
Dec 22 08:32:41 Macintosh-3 kernel[0]: bcinqcallback: target 1,
Dec 22 08:32:41 Macintosh-3 kernel[0]: bcinqcallback: target 2,
Dec 22 08:32:41 Macintosh-3 kernel[0]: bcinqcallback: target 3,
Dec 22 08:32:41 Macintosh-3 kernel[0]: bcinqcallback: target 4,
Dec 22 08:32:41 Macintosh-3 kernel[0]: bcinqcallback: target 5,
Dec 22 08:32:41 Macintosh-3 kernel[0]: Entering InitializeTargetForID
Dec 22 08:32:41 Macintosh-3 kernel[0]: bcinqcallback: target 6,
Dec 22 08:32:41 Macintosh-3 kernel[0]: bcinqcallback: target 7,
Dec 22 08:32:41 Macintosh-3 kernel[0]: bcinqcallback: target 8,
Dec 22 08:32:41 Macintosh-3 kernel[0]: bcinqcallback: target 9,
Dec 22 08:32:41 Macintosh-3 kernel[0]: bcinqcallback: target 10,
Dec 22 08:32:41 Macintosh-3 kernel[0]: bcinqcallback: target 11,
Dec 22 08:32:41 Macintosh-3 kernel[0]: bcinqcallback: target 12,
Dec 22 08:32:41 Macintosh-3 kernel[0]: bcinqcallback: target 13,
Dec 22 08:32:41 Macintosh-3 kernel[0]: bcinqcallback: target 14,
Dec 22 08:32:41 Macintosh-3 kernel[0]: bcinqcallback: target 15,
Dec 22 08:32:41 Macintosh-3 kernel[0]: bcraid: bceventkthread thread started
Dec 22 08:32:41 Macintosh-3 kernel[0]: bccfg_changeresponse B/T/L 0/0/0 device present
Dec 22 08:32:41 Macintosh-3 kernel[0]: bccfg_changeresponse B/T/L 0/1/0 no device
Dec 22 08:32:41 Macintosh-3 kernel[0]: bccfg_changeresponse B/T/L 0/2/0 no device
Dec 22 08:32:41 Macintosh-3 kernel[0]: bccfg_changeresponse B/T/L 0/3/0 no device
Dec 22 08:32:41 Macintosh-3 kernel[0]: bccfg_changeresponse B/T/L 0/Ent4/erin0 no device
Dec 22 08:32:41 Macintosh-3 kernel[0]: g ReportHbccfg_changeresponseBASp B/T/L ecificDeviceData0/5/0 Sino deze vice
Dec 22 08:32:41 Macintosh-3 kernel[0]: bccfg_changeresponse B/T/L 0/6/0 no device
Dec 22 08:32:41 Macintosh-3 kernel[0]: bccfg_changeresponse B/T/L 0/7/0 no device
Dec 22 08:32:41 Macintosh-3 kernel[0]: bccfg_changeresponse B/T/L 0/8/0 no device
Dec 22 08:32:41 Macintosh-3 kernel[0]: bccfg_changeresponse B/T/L 0/9/0 no device
Dec 22 08:32:41 Macintosh-3 kernel[0]: bccfg_changeresponse B/T/L 0/10/0 no device
Dec 22 08:32:41 Macintosh-3 kernel[0]: bccfg_changeresponse B/T/L 0/11/0 no device
Dec 22 08:32:41 Macintosh-3 kernel[0]: bccfg_changeresponse B/T/L 0/12/0 no device
Dec 22 08:32:41 Macintosh-3 kernel[0]: bccfg_changeresponse B/T/L 0/13/0 no device
Dec 22 08:32:41 Macintosh-3 kernel[0]: bccfg_changeresponse B/T/L 0/14/0 no device
Dec 22 08:32:41 Macintosh-3 kernel[0]: bccfg_changeresponse B/T/L 0/15/0 no device
Dec 22 08:32:41 Macintosh-3 kernel[0]: Entering InitializeTargetForID
Dec 22 08:32:41 Macintosh-3 kernel[0]: bcmsg_srbcomplete: seq_num 73 scsi_done DONE
Dec 22 08:32:42 Macintosh-3 kernel[0]: bcmsg_srbcomplete: seq_num 81 scsi_done DONE
Dec 22 08:32:42 Macintosh-3 kernel[0]: bcmsg_srbcomplete: seq_num 83 scsi_done DONE
Dec 22 08:32:47 Macintosh-3 ReportCrash[103]: Formulating crash report for process qmasterd[100]
Dec 22 08:32:49 Macintosh-3 ReportCrash[103]: Saved crashreport to /Library/Logs/CrashReporter/qmasterd2008-12-22-083242Macintosh-3.crash using uid: 0 gid: 0, euid: 0 egid: 0
Dec 22 08:32:49 Macintosh-3 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Resources/DMProxy[104]: No server connection, no profiles loaded
Dec 22 08:32:49 Macintosh-3 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Resources/DMProxy[105]: No server connection, no profiles loaded
Dec 22 08:32:49 Macintosh-3 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Resources/DMProxy[109]: No server connection, no profiles loaded
Dec 22 08:32:49 Macintosh-3 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Resources/DMProxy[108]: No server connection, no profiles loaded
Dec 22 08:32:49 Macintosh-3 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Resources/DMProxy[107]: No server connection, no profiles loaded
Dec 22 08:32:49 Macintosh-3 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Resources/DMProxy[106]: No server connection, no profiles loaded
Dec 22 08:32:50 Macintosh-3 com.wacom.wacomtablet[112]: I/O warning : failed to load external entity "/Library/Preferences/com.wacomtablet.defaults.xml"
Dec 22 08:32:51 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:32:51 Macintosh-3 loginwindow[32]: Login Window Started Security Agent
Dec 22 08:32:52 Macintosh-3 com.apple.launchd[1] (com.apple.familycontrols): Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
Dec 22 08:32:52 Macintosh-3 mds[31]: (/Volumes/RAID/.Spotlight-V100/Store-V1/Stores/94C229C0-5C65-4491-8451-E3B1ADBC A7A8)(Error) IndexCI in ContentIndexOpenBulk:Could not open /Volumes/RAID/.Spotlight-V100/Store-V1/Stores/94C229C0-5C65-4491-8451-E3B1ADBCA 7A8/live.2.; needs recovery
Dec 22 08:32:52 Macintosh-3 com.apple.launchd[1] (com.apple.familycontrols): Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
Dec 22 08:32:52 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 9 seconds
Dec 22 08:32:52 Macintosh-3 com.apple.launchd[1] (com.apple.familycontrols): Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
Dec 22 08:32:52: --- last message repeated 1 time ---
Dec 22 08:32:52 Macintosh-3 mds[31]: (/Volumes/RAID/.Spotlight-V100/Store-V1/Stores/58212F50-6976-4129-8A2C-C858BAB6 B973)(Error) IndexCI in ContentIndexOpenBulk:Could not open /Volumes/RAID/.Spotlight-V100/Store-V1/Stores/58212F50-6976-4129-8A2C-C858BAB6B 973/live.0.; needs recovery
Dec 22 08:32:52 Macintosh-3 mds[31]: (/Volumes/RAID/.Spotlight-V100/Store-V1/Stores/94C229C0-5C65-4491-8451-E3B1ADBC A7A8)(Error) IndexStore in SIStoreDirytySDBChunks:Error storing dirty sdb pages: 30
Dec 22 08:32:55 Macintosh-3 mds[31]: (/Volumes/RAID/.Spotlight-V100/Store-V1/Stores/58212F50-6976-4129-8A2C-C858BAB6 B973)(Error) IndexStore in SIStoreDirytySDBChunks:Error storing dirty sdb pages: 30
Dec 22 08:33:01 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:33:08 Macintosh-3 diskarbitrationd[41]: bc_service [48]:16899 not responding.
Dec 22 08:33:08 Macintosh-3 com.apple.launchd[1] (com.apple.familycontrols): Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
Dec 22 08:33:11: --- last message repeated 1 time ---
Dec 22 08:33:11 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:33:11 Macintosh-3 authorizationhost[117]: MechanismInvoke 0x125af0 retainCount 2
Dec 22 08:33:11 Macintosh-3 SecurityAgent[121]: MechanismInvoke 0x101670 retainCount 1
Dec 22 08:33:11 Macintosh-3 SecurityAgent[121]: NSSecureTextFieldCell detected a field editor ((null)) that is not a NSTextView subclass designed to work with the cell. Ignoring...
Dec 22 08:33:11 Macintosh-3 SecurityAgent[121]: MechanismDestroy 0x101670 retainCount 1
Dec 22 08:33:11 Macintosh-3 loginwindow[32]: Login Window - Returned from Security Agent
Dec 22 08:33:11 Macintosh-3 authorizationhost[117]: MechanismDestroy 0x125af0 retainCount 2
Dec 22 08:33:11 Macintosh-3 loginwindow[32]: USER_PROCESS: 32 console
Dec 22 08:33:12 Macintosh-3 com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[113]): Exited: Terminated
Dec 22 08:33:12 Macintosh-3 com.apple.launchd[1] ([0x0-0x8008].com.wacom.TabletDriver[122]): Exited: Terminated
Dec 22 08:33:12 Macintosh-3 com.wacom.wacomtablet[137]: I/O warning : failed to load external entity "/Library/Preferences/com.wacomtablet.defaults.xml"
Dec 22 08:33:13 Macintosh-3 com.apple.FolderActions.enabled[134]: launchctl: Error unloading: com.apple.FolderActions.folders
Dec 22 08:33:17 Macintosh-3 com.apple.launchd[1] (com.apple.familycontrols): Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
Dec 22 08:33:17: --- last message repeated 1 time ---
Dec 22 08:33:17 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 4 seconds
Dec 22 08:33:17 Macintosh-3 com.apple.launchd[1] (com.apple.familycontrols): Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
Dec 22 08:33:17: --- last message repeated 1 time ---
Dec 22 08:33:17 Macintosh-3 /System/Library/CoreServices/coreservicesd[54]: SFLSharePointsEntry::CreateDSRecord: dsCreateRecordAndOpen(Mike Richardson's Public Folder) returned -14135
Dec 22 08:33:17 Macintosh-3 com.apple.launchd[1] (com.apple.familycontrols): Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
Dec 22 08:33:17: --- last message repeated 1 time ---
Dec 22 08:33:17 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 4 seconds
Dec 22 08:33:17 Macintosh-3 com.apple.launchd[1] (com.apple.familycontrols): Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
Dec 22 08:33:17: --- last message repeated 1 time ---
Dec 22 08:33:17 Macintosh-3 fseventsd[37]: log dir: /Volumes/BROWNIE/.fseventsd getting new uuid: 1FBB7D54-7F36-4033-9CDF-010694576E03
Dec 22 08:33:18 Macintosh-3 kernel[0]: disk2: ioctl('
Dec 22 08:33:18 Macintosh-3 com.apple.launchd[1] (com.apple.familycontrols): Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
Dec 22 08:33:18: --- last message repeated 1 time ---
Dec 22 08:33:18 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 4 seconds
Dec 22 08:33:18 Macintosh-3 com.apple.launchd[1] (com.apple.familycontrols): Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
Dec 22 08:33:21: --- last message repeated 1 time ---
Dec 22 08:33:21 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:33:24 Macintosh-3 Finder[154]: [QL ERROR] Generator database update takes too long... we will use what we currently have
Dec 22 08:33:27 Macintosh-3 Synergyd[182]: INFO: Synergy server 1.3.0 on Darwin 9.5.0 Darwin Kernel Version 9.5.0: Wed Sep 3 11:29:43 PDT 2008; root:xnu-1228.7.58~1/RELEASE_I386 i386
Dec 22 08:33:28 Macintosh-3 Synergyd[182]: ERROR: cannot read configuration "/var/folders/6w/6wGF4yujEuuXyc1YGPvO0k+TI/-Tmp-/synergy-8FC70F04-ADC2-41A2-8A2F-A52D111771E3.conf": read error: line 15: alias "Mikes.local" is already used
Dec 22 08:33:28 Macintosh-3 SystemUIServer[153]: \n MenuCracker\n see http://sourceforge.net/projects/menucracker\n MenuCracker is now loaded. Ready to accept new menus. Ignore the failure message that follow.
Dec 22 08:33:29 Macintosh-3 SystemUIServer[153]: failed to load Menu Extra: NSBundle </Library/PreferencePanes/SynergyKM.prefpane/Contents/Resources/MenuCracker.men u> (loaded)
Dec 22 08:33:31 Macintosh-3 SystemUIServer[153]: MenuCracker: Loading 'SMStatusMenuExtra'.
Dec 22 08:33:32 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:34:02: --- last message repeated 2 times ---
Dec 22 08:34:02 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:34:32: --- last message repeated 2 times ---
Dec 22 08:34:32 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:35:03: --- last message repeated 2 times ---
Dec 22 08:35:03 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:35:33: --- last message repeated 2 times ---
Dec 22 08:35:33 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:36:03: --- last message repeated 2 times ---
Dec 22 08:36:03 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:36:34: --- last message repeated 2 times ---
Dec 22 08:36:34 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:37:04: --- last message repeated 2 times ---
Dec 22 08:37:04 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:37:34: --- last message repeated 2 times ---
Dec 22 08:37:34 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:38:04: --- last message repeated 2 times ---
Dec 22 08:38:04 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:38:35: --- last message repeated 2 times ---
Dec 22 08:38:35 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:39:05: --- last message repeated 2 times ---
Dec 22 08:39:05 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:39:35: --- last message repeated 2 times ---
Dec 22 08:39:35 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:40:06: --- last message repeated 2 times ---
Dec 22 08:40:06 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:40:36: --- last message repeated 2 times ---
Dec 22 08:40:36 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:41:06: --- last message repeated 2 times ---
Dec 22 08:41:06 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:41:36: --- last message repeated 2 times ---
Dec 22 08:41:36 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:42:07: --- last message repeated 2 times ---
Dec 22 08:42:07 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:42:37: --- last message repeated 2 times ---
Dec 22 08:42:37 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:43:07: --- last message repeated 2 times ---
Dec 22 08:43:07 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:43:38: --- last message repeated 2 times ---
Dec 22 08:43:38 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:44:08: --- last message repeated 2 times ---
Dec 22 08:44:08 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:44:38: --- last message repeated 2 times ---
Dec 22 08:44:38 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:45:08: --- last message repeated 2 times ---
Dec 22 08:45:08 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:45:39: --- last message repeated 2 times ---
Dec 22 08:45:39 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:46:09: --- last message repeated 2 times ---
Dec 22 08:46:09 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:46:39: --- last message repeated 2 times ---
Dec 22 08:46:39 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:47:10: --- last message repeated 2 times ---
Dec 22 08:47:10 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:47:40: --- last message repeated 2 times ---
Dec 22 08:47:40 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:48:10: --- last message repeated 2 times ---
Dec 22 08:48:10 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:48:40: --- last message repeated 2 times ---
Dec 22 08:48:40 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:49:11: --- last message repeated 2 times ---
Dec 22 08:49:11 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:49:41: --- last message repeated 2 times ---
Dec 22 08:49:41 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:50:11: --- last message repeated 2 times ---
Dec 22 08:50:11 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:50:42: --- last message repeated 2 times ---
Dec 22 08:50:42 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:51:11: --- last message repeated 2 times ---
Dec 22 08:51:11 Macintosh-3 ajad[49]: * ajad - restoring default state *
Dec 22 08:51:12 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:51:14 Macintosh-3 com.ciprico.bcpopup[136]: Couldn't create a plugin interface for the ioservicet. (0xe00002be)
Dec 22 08:51:22 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:51:44: --- last message repeated 2 times ---
Dec 22 08:51:44 Macintosh-3 quicklookd[458]: EXCEPTION CPMessageException: (null)
Dec 22 08:51:52: --- last message repeated 3 times ---
Dec 22 08:51:52 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:52:22: --- last message repeated 2 times ---
Dec 22 08:52:23 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:52:53: --- last message repeated 2 times ---
Dec 22 08:52:53 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:52:54 Macintosh-3 kernel[0]: Archive Utility[475] Unable to quarantine `..DSStore': 1
Dec 22 08:52:54: --- last message repeated 1 time ---
Dec 22 08:52:54 Macintosh-3 kernel[0]: Archive Utility[475] Unable to quarantine `._crossover7.0.2.dmg': 1
Dec 22 08:52:54 Macintosh-3 kernel[0]: Archive Utility[475] Unable to quarantine `..DSStore': 1
Dec 22 08:52:54 Macintosh-3 kernel[0]: Archive Utility[475] Unable to quarantine `._Readme.txt': 1
Dec 22 08:53:03 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:53:33: --- last message repeated 2 times ---
Dec 22 08:53:33 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:54:04: --- last message repeated 2 times ---
Dec 22 08:54:04 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:54:34: --- last message repeated 2 times ---
Dec 22 08:54:34 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:54:40 Macintosh-3 ajad[49]: * ajad - restoring default state *
Dec 22 08:54:44 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:55:14: --- last message repeated 2 times ---
Dec 22 08:55:14 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:55:44: --- last message repeated 2 times ---
Dec 22 08:55:44 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:56:15: --- last message repeated 2 times ---
Dec 22 08:56:15 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:56:45: --- last message repeated 2 times ---
Dec 22 08:56:45 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:57:15: --- last message repeated 2 times ---
Dec 22 08:57:15 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:57:46: --- last message repeated 2 times ---
Dec 22 08:57:46 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:58:16: --- last message repeated 2 times ---
Dec 22 08:58:16 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:58:46: --- last message repeated 2 times ---
Dec 22 08:58:46 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:59:17: --- last message repeated 2 times ---
Dec 22 08:59:17 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 08:59:47: --- last message repeated 2 times ---
Dec 22 08:59:47 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 09:00:17: --- last message repeated 2 times ---
Dec 22 09:00:17 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 09:00:48: --- last message repeated 2 times ---
Dec 22 09:00:48 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 09:01:18: --- last message repeated 2 times ---
Dec 22 09:01:18 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 09:01:48: --- last message repeated 2 times ---
Dec 22 09:01:48 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 09:02:18: --- last message repeated 2 times ---
Dec 22 09:02:18 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 09:02:49: --- last message repeated 2 times ---
Dec 22 09:02:49 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 09:03:19: --- last message repeated 2 times ---
Dec 22 09:03:19 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 09:03:49: --- last message repeated 2 times ---
Dec 22 09:03:49 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 09:04:19: --- last message repeated 2 times ---
Dec 22 09:04:19 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 09:04:50: --- last message repeated 2 times ---
Dec 22 09:04:50 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 09:05:20: --- last message repeated 2 times ---
Dec 22 09:05:20 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 09:05:50: --- last message repeated 2 times ---
Dec 22 09:05:50 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 09:06:21: --- last message repeated 2 times ---
Dec 22 09:06:21 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 09:06:51: --- last message repeated 2 times ---
Dec 22 09:06:51 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 09:07:21: --- last message repeated 2 times ---
Dec 22 09:07:21 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 09:07:51: --- last message repeated 2 times ---
Dec 22 09:07:51 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 09:08:22: --- last message repeated 2 times ---
Dec 22 09:08:22 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 09:08:52: --- last message repeated 2 times ---
Dec 22 09:08:52 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 09:09:22: --- last message repeated 2 times ---
Dec 22 09:09:22 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 09:09:53: --- last message repeated 2 times ---
Dec 22 09:09:53 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 09:10:23: --- last message repeated 2 times ---
Dec 22 09:10:23 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 09:10:53: --- last message repeated 2 times ---
Dec 22 09:10:53 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
Dec 22 09:11:23: --- last message repeated 2 times ---
the rest to followIt looks like you have multiple problems going on at once.
It takes about 10 seconds from startup to get to the point where it starts complaining:
Dec 22 08:30:54 Macintosh-3 kernel[0]: USBF: 12.187 AppleUSBHubPort: Port 2 of Hub at 0x5d000000 about to terminate a busy device (IOUSBCompositeDevice) after waiting 10 seconds
This is some USB device that's hanging. Try unplugging your everything on the USB line other than your keyboard and mouse and see what difference that makes..
Dec 22 08:31:00 Macintosh-3 com.apple.launchd[1] (com.ciprico.bcapiservice): Throttling respawn: Will start in 10 seconds
This is your RAID controller and it's clearly having issues. Without knowing your disk configuration it's impossible to predict what impact this will have, but over half the messages relate to the RAID controller. Where did you get the controller? What devices are connected to it? -
I am using Dreamweaver to build my website (www.actitudm.com
if anyone wants to check it out) and I am having issues with the
content loading correctly. It looks like I have the code right, but
it isn't finding my CSS or my Images, so the page is all jacked. I
have godaddy hosting the site, and the root and everything looks
good! The damn support staff over there even said that all the
files are where they are supposed to be, just not linking
correctly. Any help would be greatly appreciated!!!!> <p><img
src="file:///actitudm/_images/NOVIEMBRE.jpg" width="159"
> height="206"
> alt="November" />
That's something you would never want to see in a saved page.
You should
not have 'file:///' anywhere in your site.
> Instead it should read:
>
> <p><img src="///actitudm/_images/NOVIEMBRE.jpg"
width="159" height="206"
> alt="November" />
No. Instead it should read (assuming you want a root relative
link, and
assuming that the root folder of the LOCAL site contains a
folder called
"actitudm") -
<p><img src="/actitudm/_images/NOVIEMBRE.jpg"
I suspect, however, that it does not. The problem is in how
you have
defined your local site.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"carguy73" <[email protected]> wrote in
message
news:gm7voc$md0$[email protected]..
> All of what you say, I've done, and still no go. Can I
post a screenshot?
> That
> way I can show you my site definition. So you're saying
that nowhere in
> the
> code should it read:
>
> <p><img
src="file:///actitudm/_images/NOVIEMBRE.jpg" width="159"
> height="206"
> alt="November" />
>
> Instead it should read:
>
> <p><img src="///actitudm/_images/NOVIEMBRE.jpg"
width="159" height="206"
> alt="November" />
>
> where actitudm would be the root directory of the host
server? Now, does
> the
> root directory on the server being named /jaimew/ make a
difference? Can I
> have
> godaddy CHANGE the rootdir name to what I need it to be?
And thank you for
> being patient!
> -
higuys i dont really know anything about photoshop but what im looking for is a guide to layer 2 pictures over each other..the first picture is of a car and the second is of an alloy wheel,what i want is to be able to move the picture of the alloy onto the picture of the car so i can see what the wheel looks like on the car.any help appreciated
UMM I think he needs to select and cut out just the WHEELS and apply to the
car picture
read the rest of his post
making selections is too much to type
there are many techniques and many tutorials
basically once you got the wheel selected just open car image and drag the
selection over the other picture (or copy/paste)
then use edit>transform to resize or change perspective to fit
if the wheel is the same for front and back
drag wheel layer to the paper icon to dupe it and use move tool to place
over other wheel
save the layered doc as PSD in case you need to edit
and use save as.. or save for web to make a flattened copy
Maybe you are looking for
-
Checking the Allocation of General Ledgers to Cost Centres
Hi Gurus, Can anyone help me to find out that how to check the allocation of General Ledgers expenses to various cost centers. Since in production concern , one GL might be getting allocated to various cost centers . I just wanted to know that a part
-
Sync Palm treo with Mac and Windows
Have a Palm Treo 650 for both personal and work use. Unse a Windows box at work and a Mac at home. I can sync the Palm with my Mac, and I can sync it with Outlook in Windows, but doing this leads to problems, especially multiple entries in both calen
-
How to pass a list as bind variable?
How can I pass a list as bind variable in Oracle? The following query work well in SQL Developer if I set ":prmRegionID=2". SELECT COUNTRY_ID, COUNTRY_NAME FROM HR.COUNTRIES WHERE REGION_ID IN (:prmRegionID); The problem is that I can't find how to s
-
Initiate web dynpro from non-SAP system
Hi all, My costumers are using a non-SAP system, and I need to open a SAP purchase order from this system (based on the order number). Is it possible to put in a link on the non-SAP system, that initiates a web dynpro pop up filed with a SAP purchase
-
Modify existing data using LSMW IDoc method
Hi experts, I am trying to transfer activity data from R/3 system to CRM using Idoc LSMW method. It working fine that LSMW creates new activities in CRM system, & there is a check in the conversion code that if the activity we are trying to transfer