FCP 7 on Macbook Air 11" (canvas playback & sequence/render)
My high school students are using FCP 7 on Macbook Airs. One problem a few of them are encountering is playback in the Canvas-- the resolution is very low and when I go to their Playback Video Quality setting in the Timeline, the only options are Dynamic or Low. Why are Medium and High greyed out?
Also, sometimes the video 'stutters' in the Canvas. The footage we are currently working with has all been transcoded into ProRes LT.
Also, when I match the settings to the clips formats, the students all still need to render. Yet, on my computer (also a Macbook Air with FCP 7), when I do the same thing (match the settings to the clip), I do not need to render.
All of these problems seem to be related to format/compression....the only one I've experienced on my computer is the stutter. The Playback and Render issues are not happening to me, nor to all of the students.
I've looked through all the possible settings everywhere and I can't see what is different about the macbooks that work vs. the ones that do not.
Any thoughts?
Thanks!
I don't have the MB Air at hand right this minute, but I think I remember all the details. I converted Flip Camera files using Compressor with these settings: 1280 x 720, ProRes(LT), SQ, 30 fps, No Field dominance. And I set the Sequence settings to match exactly.
The odd thing is, on some of the MB Airs (these are from this summer, so a recent iteration), there is no playback issue. But, on all of them, even when I set the Sequence to match the clip formats, they all require Renders. My "teacher" macbook Air is basically the same configuration yet mine does not require a Render when I match the footage to the sequence. Also, I have no Playback issues (except the occasional stutter, which I can solve usually), while some of my students do. Why is their High & Medium Playback greyed out regardless of Safe RT or not?
Thanks!
p.s. : All being store on the internal drive.
Similar Messages
-
I have an iMac, MacBook Pro and MacBook Air. Until recently Firefox worked fine on them all and was my default web browser. Suddenly and with no other indications, FF wouldn't load on my MacBook Air. The opening sequence commences but hangs up with a "loading" indication. I have tried uninstalling FF with CleanMyMac and reinstalling. All is fine until I attempt to open FF when again I get a hang up with the "loading" indication. FF is still working fine on my iMac and MacBook Pro. Weird or what!
I have that problem too! Have anyone figure it out?
Help!!
;) -
im thinking about buying a mac book air for my mobile life, except i have one question. will it be able to run final cut pro well. i dont need to do any hardcore editing on it because i do that when i get home to my desktop, but what i will need to do are the following
- import clips at blue ray quality
- make some small edits
-watch them in final cut
etc.
i was thinking about either getting the standard 13 inch w/ 4gb ram or the 11inch with 4gb ram and 1.6ghz. any suggestionsKnew I wanted to edit so I got the 1.6 processor with 4gb ram (more ram the better as I have been reading no upgrades as it might be built in). Definitely purchase the 128gb storage as the pro apps will eat up the space (I got 16gb left). I'm hoping 3rd party company will offer a ssd upgrade (this looks to be upgradable).
Editing 1920x1080 Pro Res in FCP with no stutter. I can playback a title in realtime. Will be editing a project in the next couple weeks and will post my results.
I hooked up the minidisplay port via HDMI to a full 1080 tv and it was playing out out FCP (video and audio) with out any stutter. It was a quick test.
This little machine definitely works pretty hard and well with FCP.
Side note: Photoshop CS5 and other apps launch way faster then a 17inch i7 Powerbook. Simply amazing.
As for battery life... I was doing some editing in the car... and the battery time showed about almost 2 hours... and that was with a USB hard drive connected.
Editing without a USB hard drive is around 3 hours.
Did a quick test for you... 1280x720 footage.
1. Scaled, with Title: safe realtime playback (green)
2. Scaled, with Title and color correction: unlimited realtime playback (orange)
3. If you add rotation to the above it will drop frames.
I don't use Motion much. I'm a After Effects user. I dabbled with Motion before and I launched it and played around for a second on the Macbook air and it seems to play nicely.
Hope this helps and I will send reports from a editing session of a half hour show in 1920x1080 pro res. -
Video playback is choppy (cuts out every 30-45 seconds) when air playing from both my MacBook Air 1.3 GHz Intel Core i5 running Yosemite and my husbands new MacBook Pro, but runs perfectly when mirroring from any of our iOS devices (iPhone 6+, iPad mini 3, etc.) We have Apple TV 2. This problem just started a few weeks ago, was working fine around Christmas. The problem seems to have coincidentally started right after our son tried plugging in and setting up his Chromecast on our tv. I disconnected the Chromecast, but we still have the problem. All of our software if up to date and I've tried disconnecting blue tooth, we do not have a microwave and our wifi network has a very strong signal. We have an Airport Extreme base station. Is there a solution to our problem?
Hi leahmturner,
I see that you are experiencing an issue with choppiness while AirPlay Mirroring from your computers to your Apple TV. I have an article that contains some helpful troubleshooting steps for you regarding this issue:
About AirPlay Mirroring in OS X - Apple Support
http://support.apple.com/en-us/HT201343
Optimizing image quality
Resolution matching modes
You can choose between two desktop resolution matching modes that let you select which display will have the best image. When AirPlay Mirroring is turned on, select an option under "Match Desktop Size To:" in the AirPlay Mirroring menu extra.
Match Desktop Size To: Apple TV
AirPlay Mirroring changes the desktop resolution to best match your Apple TV, resulting in a 16:9 image that fills the HDTV screen. This setting often produces the sharpest image on the HDTV. The aspect ratio and/or resolution of the built-in Mac display may change to accommodate the Apple TV.
Match Desktop Size To: This Mac
AirPlay Mirroring scales the contents of the desktop to fit on the Apple TV, leaving the resolution of your Mac's display unchanged. Use this setting for the sharpest image on your Mac's display. Depending on your Mac model, the resulting image may not fill the HDTV screen.
Troubleshooting AirPlay Mirroring
If you don't see mirroring options
If your Mac and Apple TV are on the same network, but no AirPlay Mirroring menu appears, your Apple TV may be asleep. Simply press a button on your Apple TV remote to wake it up. After a few seconds, the AirPlay Mirroring menu extra appears. If you still don't see the options you expect, make sure your Apple TV has the current software update installed. Also make sure that you have the "Show mirroring options in the menu bar when available" option selected in the Displays pane of System Preferences.
If the menu bar or Dock is cropped
Some HDTVs have bezels that cover a small percentage of the screen. This can result in a slight cropping of a full-resolution HDTV image. Depending on the HDTV model, AirPlay Mirroring may automatically adjust the picture size to prevent cropping. If you are using OS X Mountain Lion or later, and you see cropping of the menu bar or Dock when using AirPlay Mirroring, toggle the Overscan correction option in Displays preferences.
Minimize video post-processing
HDTVs often apply picture quality enhancements intended to improve the look of film and video sources. In some cases, these enhancements can lead to over-sharpening artifacts when displaying your Mac desktop. Some HDTV models have built-in settings to change or disable the enhancements for use with a computer (computer, presentation, or game modes). Otherwise, the controls for sharpness, detail enhancement and noise reduction can be used to optimize the appearance of the Mac desktop. Consult your HDTV’s manual for guidance on the appropriate settings for use with a computer.
Firewall security settings
If you use a firewall, make sure the following firewall security options have been set to allow AirPlay Mirroring to work:
Choose System Preferences from the Apple menu ().
Click Security & Privacy, then click Firewall.
Click the lock icon to unlock it if it's locked, then type an administrator name and password.
Click Firewall Options.
Deselect (uncheck) the “Block all incoming connections” checkbox.
Select (check) the “Automatically allow signed software to receive incoming connections” checkbox.
Thanks for coming to the Apple Support Communities!
Regards,
Braden -
My MacBook Pro died and I got the new MacBook Air. I wanted to put FCP 7 on it so I could work on remotely, but there's no DVD drive (my FCP is on DVD) and when I tried to copy it from the old hard drive it said it copied, but now it won't open. Does anyone have any suggestions?
Installing FCP from the disks is recommended. Components that it needs to work are installed all over the system.
You need to get the external USB DVD drive Apple makes:
http://store.apple.com/us/product/MD564ZM/A/apple-usb-superdrive
Or another one by a third party. or find a friend with a Mac with a DVD drive, and bring you disks over there and use Disk Utility to make DISK IMAGES of the installer disks, put those on a hard drive and use those to install. -
Final Cut Pro (FCP) on MacBook Air. Possible?
Is it possible to run Final Cut Pro (NOT FCP X) on a MacBook Air?
I would like to be able to do basic editing, but mainly use it to dump footage on location to external harddrives."Traveling editor" could imply dedicated offlining. Shane, do you think that could work with a low rez ProRes codec?
I don't think anyone has tried to use an AirBook for FCP. Anyone bother to search?
bogiesan -
Attn: ALL APPLE PORTABLE OWNERS -MacBook Pro, MacBook Air, Mac mini slowdown kernel / high CPU use problem and solution.
YOU COULD FRY YOUR COMPUTER IF YOU DO NOT FIX THIS PROBLEM SO PLEASE READ THIS ENTIRE MESSAGE!
YOUR MAC WILL THANK YOU
Hey all.
Like many of you I've got a newer Apple portable which slows down to an unusable level for an unknown reason. In my case a 13" mid 2009 Intel MacBook Pro Core 2 duo laptop. After many failed attempts to figure out what this nutty problem is I have discovered the problem, the solution and I have solved this for my own MacBook Pro. Since this fix it has been working immediately and consistently -without issue
I am sharing this with you in hopes that you to can fix your Apple portable yourself or so you know what to tell the Apple techs so they can quickly fix your Mac from this wacky and unfortunate kernel CPU hogging problem.
User Software Symptoms :
Your Apple portable computer periodically for an unknown reason slows down making everything frustratingly slow. This happens even when running previous apps that were never a problem; things that your Mac should be able to handle easily but for some reason now it can't.
Slowdown most often happens during high CPU use such as gaming, video playback/editing, etc. or when running multiple apps (even non CPU intensive apps) at the same time.
Possible Hardware Symptoms:
Your computer is making more noise than it did previously.
Your computer occasionally makes more noise but then gets quieter.
Your computer is always extremely quiet (too quiet) even during high CPU apps -worst case scenario.
It feels hotter than it normally does. Test: After several minutes of the slowness/high kernel CPU touch the computer to feel if it's hotter than normal.
Looking at Activity Monitor (in the Utilities folder) shows the kernel_task is going bonkers eating up CPU but you have no idea why.
After trying many different things to solve this problem such as :
PR ram reset, SMC reset, fresh OS install of 10.5 and 10.6 on external hard-drives, calling and speaking to various Apple tech people who had no ideas/solutions, etc. I had no luck.
Btw, if you're having the symptoms I've decscribed above I would not run the Apple Hardware check (read below as to why). You could fry your Mac!
After much testing I found the problem :
It is my belief that "recent" Apple portable computers are using low quality internal fans which soon stop working!
Fail time period seems to be about 1.0 years to 2.5 years of use but this fail rate could vary depending on use.
First noticeable symptoms (depending on what you notice) could be computer slowdown or your fan is making more noise than it normally does. This is your fan's lubrication slowly eroding making your fan spin slower and less smooth resulting in the louder noise and slower rpm spin speed. The slower fan spin speed means less cooling is happening for your computer. The effect on your computer is that the CPU and other chips are heating up! Overheating to be more specific. When your computer's chips overheat they get wonky and screw things up. Most often this seems to have the effect of making the kernel hog CPU resulting in a frustratingly slow user experience! Heat kills computer chips and it is extremely bad for them. Extreme overheat or repeated overheating has been said to shorten the life of computer chips or in extreme cases even fry them completely!
The longer this goes on without being fixed your fan loses more lubrication and spins slower and slower cooling lesser and lesser resulting in your CPU heating up more and more possibly shortening the life of your Mac! Eventually your fan will stop completely and you could fry your chips! My fan stopped completely and my MBP was running very quietly, too quietly. Luckily I did not fry my chips because I was avoiding using high CPU apps because I knew something was wrong due to the massive slow down and wonkiness when I'd run them.
Side Note:I'm a bit concerned about all those Mac mini servers which may be using the same defective low quality fans which cannot be easily serviced by their owners as they are co-located in some server facility. One positive thing is those facilities are usually well airconditioned keeping temps low.
I suggest you do not run the Apple hardware test if you suspect your computer is overheating because the hardware test can seriously heat up your Mac! I tried running this test and my Mac got so hot I had to shut it down forcefully and I was concerned I damaged the chips. If you want to run the Apple hardware check make sure your CPU temperature is ok and that your fan works well before you run the test.
IF YOU DON'T FIX THIS PROBLEM YOU COULD FRY YOUR COMPUTER DUE TO HEAT DAMAGE!
DO NOT IGNORE THIS PROBLEM YOUR MACS LIFE MAY DEPEND ON IT!
First you need to properly diagnose this problem and see if your CPU is getting to hot and you need to see if your fans are spinning at high rpms giving proper cooling, or if they are spinning at low rpms when running high intensive apps as your CPU temp increases.
TEST IF YOUR FAN(s) IS WORKING CORRECTLY :
Unfortunately Apple does not include CPU temperature reading software nor fan rpm speed software that I am aware of.
However, There are two free ways that I know of to check your CPU tempurature and your fan speed :
One app shows fan speed, and CPU heat, etc.
One app shows fan speed, CPU heat and allows you to adjust your fan speed settings.
One app is a dashboard widget, the other is a system preference.
I suggest you download both of these to check your computer statistics.
http://www.eidac.de/?p=134
http://www.islayer.com/apps/istatpro/
http://fan-control.en.softonic.com/mac
I am not exactly sure what proper CPU temperatures are for the different Apple computers and this will change given different CPU loads.
My MBP doesn't seem to function properly with anything around 90 degrees or higher (celcius).
It seems when the fan is operating normally the CPU temp should not stay above 78 degrees even under heavy load, at least with the apps I'm running in the room temperature I'm in.
I can post back later with more specific temps under longer load, etc. but I wanted to get this post up for people to read as soon as possible so they don't fry their Macs.
If a bad fan is your problem :
THERE ARE ONLY TWO SOLUTIONS FOR THIS PROBLEM :
Fix or replace your fan so it cools the CPU and other chips properly.
I fixed my fan myself and I didn't need to buy a new one. Total cost was about $8.00 because I had to buy a #00 sized screwdriver and had it shipped to me. Price includes shipping.
On my mid 2009 model MacBook Pro fixing the fan was incredibly easy :
Before I started doing this I wasn't 100% this was the problem so I decided to try to fix my fan instead of ordering a new one and replacing it. As it turns out I didn't need a new fan, I only needed to clean the existing fan and relube it's axl so it could spin easier like when it was new. It also didn't make sense to buy a brand new fan from an Apple authorized parts reseller selling me the same low quality fan for $49.00 which would probably fail in 2 years again. Prices for new comparable fans from different manufactures range from about $15.00 USD + shipping to around $49.00 USD + shipping depending on where you order them from and what brand you get.
How to fix / replace your internal fan on a mid 2009 MacBook Pro :
Please note : I am not a hardware technician, nor expert. If you decide to fix your Mac yourself you do so at your own risk through no fault of my own. Prior to opening up your Mac you should google around and learn how to do it correctly and safely so you won't damage your Mac. For example, it is possible for you to damage your Mac by static electricity from your body. To avoid this I believe proper procedure is that you wear a 'ground strap' (around your wrist) which you clip to your Mac's metal body so your body will not excude a charge into your Mac. I believe the idea here is to keep your body's charge level and your Mac's similar. Since I do not have a ground strap and fixing/replacing the fan doesn't require touching any chips I did not wear a ground strap during my fan fix. What I did was periodically repeatedly touch the metal case of my MBP hoping that would be enough and it was. Avoid unecessary actions that can build up a static charge in you. Once I started the repair I did not walk around the room building up an electrical charge in my body. Walking on carpet can often build up a large charge in us so it is better to be avoided while working on your Mac. Certain clothing can build up static charges. Combing hair, etc. If you need to get up from your repair when you come back make sure you first touch the Mac's metal case and not anything inside.
Now that we're done with the scary paranoia, below you will find some instructions on how I fixed my MBP's internal fan
Before you begin:
Check out someone's video (not mine) on how to remove / replace the fan (but not take it apart and repair it):
http://www.youtube.com/watch?v=AghE9newvbs
Check out someone's web page (not mine) on how to replace the fan in a mid 2009 MacBook Pro:
http://www.ifixit.com/Guide/Installing-MacBook-Pro-13-Inch-Unibody-Mid-2009-Fan/ 1338/1
How to repair your mid 2009 MacBook Pro fan:
Make sure you are in a 'secure' environment. No pets, no kids running around, no drinks near the Mac, etc.
Make sure your computer is unplugged from it's power supply and turned off. NOT slept. Totally off / powered down.
1. Get a size #00 phillips screwdriver (Hobby store, Radioshack, Amazon).
2. Open up your MBP by unscrewing the bottom (yes flip it over so it's resting upsidedown). Note where each screw goes because some are different lengths. I placed each one around my MBP where they go, insuring I know their order (don't jumble them up). Note which direction your MBP is facing when it's upside down so if you spin it around while working on it you still know where the screws go.
2b. Some recommend removing the MBP's battery but I didn't do this step. You probably should, just to be safe. Follow the online instructions from the web page I listed about disconnecting the battery.
3. Unscrew the fan's 3 holding screws.
4. Unplug the fan's electrical connection (lift it straight up off the board). If you need to you can try to pry it up while you lift with a non metal/non electrical conductive object like a spudger if you have one or -perhaps a pen cap. Before you remove it, look closely at how it's attached so when you put it back on you won't wonder if you're doing it correctly. There's only one way it can go because it cannot fit 'the wrong way' but looking at it closely will make you feel more confident popping it back on when the time comes.
5. Remove the fan - it easily lifts out.
6. Take the fan apart by unscrewing it's one screw then unlatching the plastic clips which hold it together.
7. Seperate the fan blades from the housing. Lift the fan blades off of the fan housing by pulling it straight out away from the housing.
8. Clean off the dust that's gathered. A can of compressed air helps here (I didn't have one). I used a little brush from my electric shaver kit which worked well. Once you've removed all the dust from the fan and surrounding areas proceed to the next step.
9. Reapply new lubrication. You need less than 1 drop. Be sure it covers the entire fan blade axl as this is what needs to be well lubricated. Make sure there isn't excess oil that will fly around when the axl/fan spins at high rpms. I used the only oil I had which was olive oil (for cooking!) but I do not suggest this. At the time I was doing this I didn't know my fan was the problem so I wasn't even sure I was going to relube it. You should probably use something more appropriate perhaps like 3 in 1 oil. A good idea would be to call the manufatures of these little fans and ask them. Maybe a hobby store knows of good lubricants for these purposes?
DO NOT use things like WD 40 as it's not a long term lubricant or so I've read.
10. Once your fan is now clean and oiled (make sure there isn't too much oil) reassmble the fan.
Push the fan blades/axl back into the housing shaft. Give it a few spins with your finger.
Screw together the fan housing then reclip the clips.
11. Place the now reassembled fan back into your Mac and screw it in place (3 screws).
12. Reattach the fan's electrical wiring by gently pushing it into place. Make sure you've got the right end facing down before you push it in place.
13. Once your Mac's internals are clean and reassembled, place the rear cover back on your Mac and screw it in place.
14. Double check you didn't forget anything like screws, tools, etc.
15. Boot up your Mac and monitor the temperature and fan speed using those programs.
Compare the previous temps/fan speed to the current temp/fan speed.
Run a high CPU intensive app where your computer has been slowing down.
You should now have a happy Mac
If you have this problem and this solution fixed it for you please post in this thread letting me and everyone else know!
Hope that helps.Thanks for your lengthy reminder dude, I have a similar Mac with yours. I suspect its a software fault because it happens after I upgraded to Lion, 10.7.2.
-
Macbook Air 11" i7 corrupt files problem with Adobe Illustrator CS4
Hi
this problem may not be entirely related but maybe someone could help anyways or knows how I can proceed...
I'm running Illustrator CS4 on a Macbook Air 11" (latest 2011 model, with i7, 4GB, 128SSD), and lately some files are getting corrupted. specifically, adobe illusrator CS4 files with weeks of work. interestingly, the time machine backups are also getting corrupted.
its like I'm working on a file for a few days, backing up with time machine as well
closes the file, after a few days returns to it… (normal behavior)
then when i try to get back to the file then sometimes it says "Cant open the illustration, could not complete the operation" and opens a blank canvas.
restoring the file via time machine also gives the same error (its like all versions get corrupted simultaneously), even 4-5 versions backwards, even though they worked before when the file worked
it happened quite a few times, ruining weeks of work.
I tried the following:
reinstalling CS4 - didn't work
Opening the files on CS5 - still don't open
doing the file recovery thing and then opening it in a notepad - didn't work at all
using Time machine - the files are still corrupt
it only happenes with AI files, not photoshop files, for example.
I thought maybe it has anything to do with SSD? since my previous macbook pro (15", 2007) never did these errors…
please help
EidoIf at all, this would be I/O performance and bandwidth issues with Time Machine, but I don't think that's the problem. More to the point I think that it's a case of Preview opening the files to genereate thumbnails and icons and something going wrong there. I'd look up some guides on how to edit the relevant plist and conf files to exclude your AIs or turn off the behavior to generate these previews globally. This may help hugely...
Mylenium -
Can I use my macbook air to view video from my camcorder
I have a Panasonic HDC S9 HD digital vide camera, which has a mini HDMI port to coonect to an external monitor to view playback directly from the camera
I have a Macbook Air 13" bought 5 months ago
I have bought a thunderbolt to HDMI cable and have used that to connect the Air to the video camera via HDMI
But I dont see how to see the playback from the camera on the air.
Any ideas?
I am hoping that I am not about to be told that the Air will only export video via the thunderbolt port and will not allow video IN to show on the Air screen... please help?
Many thanksThanks SP
But I need to do something more immediate than that.
One of the things my partner does is to advise her clients on their presentation skills. So she wants to video them doing a presnettation to her, and then immediatley play it back so they can both look at it whilst she critiques it.
There is no time to transfer video files and move between aplications.
If we connect the video camer via HDMI to the TV, we can play back clips on the TV directly from the camera - no need for data transfers
What I want to do is use the Air as the TV monitor for this playback so she can do this on client site in any room with her own equipment - not needing a TV
I had hoped that buying the thunderbolt to HDMI lead would enable the Air to act as the out put monitor
But I cannot see how to get that to work -
ArchLinux Installation disk doesn't recognize Macbook Air SSD[SOLVED]
I want to install ArchLinux on my new MacBook Air (dual boot), I made a dd of the installation iso to a usb disk. The usb disk can boot and run, but it cannot recognize the hard drive(SSD) of Macbook air.
There are three disk files in dev: /dev/sda /dev/sda1 and /dev/sdb
/dev/sda is the usb disk, /dev/sdb cannot be opened by parted and cannnot be mounted (it reports "no medium found") and I believe it is the sd card reader.
What can I do?
dmesg shows the following errors:
ata1: SATA max UDMA/133 abar m8192@0x93284000 port 0x93284100 irq 25
ata1: COMRESET failed (errno=-16)
ata1: link is slow to respond, please be patient (ready=0)
ata1: COMRESET failed (errno=-16)
ata1: link is slow to respond, please be patient (ready=0)
ata1: COMRESET failed (errno=-16)
ata1: limiting SATA link speed to 1.5 Gbps
ata1: COMRESET failed (errno=-16)
ata1: reset failed, giving up
and lots of
applesmc: wait status failed: 5 != 0
applesmc: failed to init the device
this is whole dmesg
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.33-ARCH (thomas@evey) (gcc version 4.5.0 (GCC) ) #1 SMP PREEMPT Thu May 13 12:06:25 CEST 2010
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
BIOS-e820: 000000000008f000 - 0000000000090000 (reserved)
BIOS-e820: 0000000000090000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000006f000000 (usable)
BIOS-e820: 000000006f000000 - 000000007f000000 (reserved)
BIOS-e820: 000000007f000000 - 000000007f719000 (usable)
BIOS-e820: 000000007f719000 - 000000007f939000 (ACPI NVS)
BIOS-e820: 000000007f939000 - 000000007fef9000 (ACPI data)
BIOS-e820: 000000007fef9000 - 000000007feff000 (reserved)
BIOS-e820: 000000007feff000 - 000000007ff00000 (ACPI data)
BIOS-e820: 0000000093200000 - 0000000093201000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
DMI 2.4 present.
last_pfn = 0x7f719 max_arch_pfn = 0x100000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 080000000 mask F80000000 uncachable
1 base 07FF00000 mask FFFF00000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000002000 (usable)
modified: 0000000000002000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000008f000 (usable)
modified: 000000000008f000 - 0000000000090000 (reserved)
modified: 0000000000090000 - 000000000009fc00 (usable)
modified: 000000000009fc00 - 00000000000a0000 (reserved)
modified: 00000000000e0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000006f000000 (usable)
modified: 000000006f000000 - 000000007f000000 (reserved)
modified: 000000007f000000 - 000000007f719000 (usable)
modified: 000000007f719000 - 000000007f939000 (ACPI NVS)
modified: 000000007f939000 - 000000007fef9000 (ACPI data)
modified: 000000007fef9000 - 000000007feff000 (reserved)
modified: 000000007feff000 - 000000007ff00000 (ACPI data)
modified: 0000000093200000 - 0000000093201000 (reserved)
modified: 00000000f0000000 - 00000000f4000000 (reserved)
modified: 00000000fec00000 - 00000000fec01000 (reserved)
modified: 00000000fee00000 - 00000000fee01000 (reserved)
modified: 00000000ffc00000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 15000-1a000
RAMDISK: 6e7e5000 - 6efde026
Allocated new RAMDISK: 00100000 - 008f9026
Move RAMDISK from 000000006e7e5000 - 000000006efde025 to 00100000 - 008f9025
ACPI: RSDP 000fe020 00024 (v02 APPLE )
ACPI: XSDT 7f96a1c0 0008C (v01 APPLE Apple00 00000061 01000013)
ACPI: FACP 7f968000 000F4 (v04 APPLE Apple00 00000061 Loki 0000005F)
ACPI: DSDT 7f95b000 0572C (v01 APPLE MacBookA 00030001 INTL 20061109)
ACPI: FACS 7f71e000 00040
ACPI: HPET 7f967000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: APIC 7f966000 00068 (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: APIC 7f965000 00068 (v02 APPLE Apple00 00000001 Loki 0000005F)
ACPI: ASF! 7f963000 000A5 (v32 APPLE Apple00 00000001 Loki 0000005F)
ACPI: SBST 7f962000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: ECDT 7f961000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: SSDT 7f957000 00024 (v01 APPLE Apple 00001000 INTL 20061109)
ACPI: SSDT 7f956000 000FC (v01 APPLE SDCard 00001000 INTL 20061109)
ACPI: SSDT 7f954000 004DC (v01 APPLE CpuPm 00003000 INTL 20061109)
ACPI: MCFG 7f964000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: SSDT 7f95a000 000A5 (v01 SataRe SataPri 00001000 INTL 20061109)
ACPI: SSDT 7f959000 00074 (v01 SataRe SataSec 00001000 INTL 20061109)
ACPI: BIOS bug: multiple APIC/MADT found, using 0
ACPI: If "acpi_apic_instance=2" works better, notify [email protected]
ACPI: Local APIC address 0xfee00000
1151MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
node 0 low ram: 00000000 - 377fe000
node 0 bootmap 00016000 - 0001cf00
(10 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0001000000 - 0001550444] TEXT DATA BSS ==> [0001000000 - 0001550444]
#3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#4 [0001551000 - 00015571d5] BRK ==> [0001551000 - 00015571d5]
#5 [0000010000 - 0000011000] TRAMPOLINE ==> [0000010000 - 0000011000]
#6 [0000011000 - 0000015000] ACPI WAKEUP ==> [0000011000 - 0000015000]
#7 [0000015000 - 0000016000] PGTABLE ==> [0000015000 - 0000016000]
#8 [0000100000 - 00008f9026] NEW RAMDISK ==> [0000100000 - 00008f9026]
#9 [0000016000 - 000001d000] BOOTMAP ==> [0000016000 - 000001d000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0007f719
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
0: 0x00000000 -> 0x00000002
0: 0x00000010 -> 0x0000008f
0: 0x00000090 -> 0x0000009f
0: 0x00000100 -> 0x0006f000
0: 0x0007f000 -> 0x0007f719
On node 0 totalpages: 456361
free_area_init_node: node 0, pgdat c13f9880, node_mem_map c1559000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3952 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 2303 pages used for memmap
HighMem zone: 226844 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 0000000000002000 - 0000000000010000
PM: Registered nosave memory: 000000000008f000 - 0000000000090000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 93201000 (gap: 93201000:5cdff000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @c2800000 s34776 r0 d22568 u2097152
pcpu-alloc: s34776 r0 d22568 u2097152 alloc=1*4194304
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 452282
Kernel command line: initrd=/boot/i686/archiso.img archisolabel=ARCH_201005 tmpfs_size=75% locale=en_US.UTF-8 BOOT_IMAGE=/boot/i686/vmlinuz26
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
allocated 10440180 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000377fe:0007f719)
Memory: 1783248k/2088036k available (2895k kernel code, 41140k reserved, 1208k data, 408k init, 916588k highmem)
virtual kernel memory layout:
fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1403000 - 0xc1469000 ( 408 kB)
.data : 0xc12d3f1e - 0xc14022e0 (1208 kB)
.text : 0xc1000000 - 0xc12d3f1e (2895 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:512
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1858.186 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3717.22 BogoMIPS (lpj=6193953)
Security Framework initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
Checking 'hlt' instruction... OK.
ACPI: Core revision 20091214
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz stepping 0a
Booting Node 0, Processors #1 Ok.
Initializing CPU#1
Brought up 2 CPUs
Total of 2 processors activated (7435.67 BogoMIPS).
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-02] at [mem 0xf0000000-0xf02fffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf02fffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: EC description table is found, configuring boot EC
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x57, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
pci 0000:00:03.0: reg 10: [io 0x2100-0x21ff]
pci 0000:00:03.2: reg 10: [io 0x0000-0x00ff]
pci 0000:00:03.2: reg 20: [io 0x2240-0x227f]
pci 0000:00:03.2: reg 24: [io 0x2200-0x223f]
pci 0000:00:03.2: PME# supported from D3hot D3cold
pci 0000:00:03.2: PME# disabled
pci 0000:00:03.4: reg 10: [mem 0x93200000-0x9327ffff]
pci 0000:00:04.0: reg 10: [mem 0x9328a000-0x9328afff]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:04.1: reg 10: [mem 0x9328b100-0x9328b1ff]
pci 0000:00:04.1: supports D1 D2
pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.1: PME# disabled
pci 0000:00:06.0: reg 10: [mem 0x93289000-0x93289fff]
pci 0000:00:06.0: supports D1 D2
pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:06.1: reg 10: [mem 0x9328b000-0x9328b0ff]
pci 0000:00:06.1: supports D1 D2
pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:06.1: PME# disabled
pci 0000:00:08.0: reg 10: [mem 0x93280000-0x93283fff]
pci 0000:00:08.0: PME# supported from D3hot D3cold
pci 0000:00:08.0: PME# disabled
pci 0000:00:0a.0: reg 10: [io 0x2298-0x229f]
pci 0000:00:0a.0: reg 14: [io 0x22a4-0x22a7]
pci 0000:00:0a.0: reg 18: [io 0x2290-0x2297]
pci 0000:00:0a.0: reg 1c: [io 0x22a0-0x22a3]
pci 0000:00:0a.0: reg 20: [io 0x2280-0x228f]
pci 0000:00:0a.0: reg 24: [mem 0x93284000-0x93285fff]
pci 0000:00:0b.0: reg 10: [mem 0x93288000-0x93288fff]
pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.0: PME# disabled
pci 0000:00:17.0: PME# supported from D0 D3hot D3cold
pci 0000:00:17.0: PME# disabled
pci 0000:01:00.0: reg 10: [mem 0x93100000-0x93103fff 64bit]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:00:15.0: PCI bridge to [bus 01-01]
pci 0000:00:15.0: bridge window [mem 0x93100000-0x931fffff]
pci 0000:02:00.0: reg 10: [mem 0x92000000-0x92ffffff]
pci 0000:02:00.0: reg 14: [mem 0x80000000-0x8fffffff 64bit pref]
pci 0000:02:00.0: reg 1c: [mem 0x90000000-0x91ffffff 64bit pref]
pci 0000:02:00.0: reg 24: [io 0x1000-0x107f]
pci 0000:02:00.0: reg 30: [mem 0x93000000-0x9301ffff pref]
pci 0000:00:17.0: PCI bridge to [bus 02-02]
pci 0000:00:17.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:17.0: bridge window [mem 0x92000000-0x930fffff]
pci 0000:00:17.0: bridge window [mem 0x80000000-0x91ffffff 64bit pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00J] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00K] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00L] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00M] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *15
ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *15
ACPI: PCI Interrupt Link [LGPU] (IRQs 16 17 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSI0] (IRQs 16 17 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [Z000] (IRQs 16 17 18 19 20 21 22 23) *7
ACPI: PCI Interrupt Link [Z001] (IRQs 16 17 18 19 20 21 22 23) *5
ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 18 19 20 21 22 23) *14
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
hpet0: 4 comparators, 64-bit 25.000000 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:06: disabling [io 0x0010-0x001f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
pnp 00:06: disabling [io 0x0022-0x003f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
pnp 00:06: disabling [io 0x0044-0x005f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
pnp 00:06: disabling [io 0x0063] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
pnp 00:06: disabling [io 0x0065] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
pnp 00:06: disabling [io 0x0067-0x006f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
pnp 00:06: disabling [io 0x0072-0x0073] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
pnp 00:06: disabling [io 0x0074-0x007f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
pnp 00:06: disabling [io 0x0091-0x0093] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
pnp 00:06: disabling [io 0x0097-0x009f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
pnp 00:06: disabling [io 0x00a2-0x00bf] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
pnp 00:06: disabling [io 0x00e0-0x00ef] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
pnp 00:06: disabling [io 0x0080] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
pnp: PnP ACPI: found 8 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:06: [io 0x0400-0x047f] has been reserved
system 00:06: [io 0x0480-0x04ff] has been reserved
system 00:06: [io 0x0500-0x057f] has been reserved
system 00:06: [io 0x0580-0x05ff] has been reserved
system 00:06: [io 0x0800-0x087f] has been reserved
system 00:06: [io 0x0880-0x08ff] has been reserved
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: [io 0x0295-0x0296] has been reserved
pci 0000:00:03.2: BAR 0: assigned [io 0x2000-0x20ff]
pci 0000:00:03.2: BAR 0: set to [io 0x2000-0x20ff] (PCI address [0x2000-0x20ff]
pci 0000:00:15.0: PCI bridge to [bus 01-01]
pci 0000:00:15.0: bridge window [io disabled]
pci 0000:00:15.0: bridge window [mem 0x93100000-0x931fffff]
pci 0000:00:15.0: bridge window [mem pref disabled]
pci 0000:00:17.0: PCI bridge to [bus 02-02]
pci 0000:00:17.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:17.0: bridge window [mem 0x92000000-0x930fffff]
pci 0000:00:17.0: bridge window [mem 0x80000000-0x91ffffff 64bit pref]
pci 0000:00:15.0: power state changed by ACPI to D0
pci 0000:00:15.0: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [Z00J] enabled at IRQ 23
pci 0000:00:15.0: PCI INT A -> Link[Z00J] -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:15.0: setting latency timer to 64
pci 0000:00:17.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 1 [mem 0x93100000-0x931fffff]
pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0x92000000-0x930fffff]
pci_bus 0000:02: resource 2 [mem 0x80000000-0x91ffffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:02:00.0: Boot video device
PCI: CLS 256 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 8164k freed
apm: BIOS not found.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1292314287.046:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1710
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:15.0: setting latency timer to 64
pcieport 0000:00:15.0: irq 24 for MSI/MSI-X
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 408k freed
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:04.1: power state changed by ACPI to D0
ehci_hcd 0000:00:04.1: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:04.1: setting latency timer to 64
ehci_hcd 0000:00:04.1: EHCI Host Controller
ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:04.1: debug port 1
SCSI subsystem initialized
ehci_hcd 0000:00:04.1: cache line size of 256 is not supported
ehci_hcd 0000:00:04.1: irq 22, io mem 0x9328b100
ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:06.1: power state changed by ACPI to D0
ehci_hcd 0000:00:06.1: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [Z001] enabled at IRQ 21
ehci_hcd 0000:00:06.1: PCI INT B -> Link[Z001] -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:06.1: setting latency timer to 64
ehci_hcd 0000:00:06.1: EHCI Host Controller
ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:06.1: debug port 1
ehci_hcd 0000:00:06.1: cache line size of 256 is not supported
ehci_hcd 0000:00:06.1: irq 21, io mem 0x9328b000
ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.10
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:04.0: power state changed by ACPI to D0
ohci_hcd 0000:00:04.0: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20
ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUS0] -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:04.0: setting latency timer to 64
ohci_hcd 0000:00:04.0: OHCI Host Controller
ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:04.0: irq 20, io mem 0x9328a000
libata version 3.00 loaded.
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
pata_acpi 0000:00:0a.0: power state changed by ACPI to D0
pata_acpi 0000:00:0a.0: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 19
pata_acpi 0000:00:0a.0: PCI INT A -> Link[LSI0] -> GSI 19 (level, low) -> IRQ 19
pata_acpi 0000:00:0a.0: setting latency timer to 64
pata_acpi 0000:00:0a.0: PCI INT A disabled
ohci_hcd 0000:00:06.0: power state changed by ACPI to D0
ohci_hcd 0000:00:06.0: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [Z000] enabled at IRQ 18
ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z000] -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:06.0: setting latency timer to 64
ohci_hcd 0000:00:06.0: OHCI Host Controller
ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:06.0: irq 18, io mem 0x93289000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
ahci 0000:00:0a.0: version 3.0
ahci 0000:00:0a.0: power state changed by ACPI to D0
ahci 0000:00:0a.0: power state changed by ACPI to D0
ahci 0000:00:0a.0: PCI INT A -> Link[LSI0] -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:0a.0: irq 25 for MSI/MSI-X
ahci 0000:00:0a.0: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl IDE mode
ahci 0000:00:0a.0: flags: 64bit ncq sntf pm led pio slum part apst
ahci 0000:00:0a.0: setting latency timer to 64
scsi0 : ahci
ata1: SATA max UDMA/133 abar m8192@0x93284000 port 0x93284100 irq 25
usb 1-1: new high speed USB device using ehci_hcd and address 2
Initializing USB Mass Storage driver...
scsi1 : usb-storage 1-1:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 1-6: new high speed USB device using ehci_hcd and address 5
usb 2-1: new high speed USB device using ehci_hcd and address 2
scsi2 : usb-storage 2-1:1.0
usb 2-2: new high speed USB device using ehci_hcd and address 3
usb 3-3: new full speed USB device using ohci_hcd and address 2
usbcore: registered new interface driver hiddev
input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.0/input/input1
generic-usb 0003:05AC:023F.0001: input,hidraw0: USB HID v1.11 Keyboard [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-3/input0
generic-usb 0003:05AC:023F.0002: hidraw1: USB HID v1.11 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-3/input1
input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.2/input/input2
generic-usb 0003:05AC:023F.0003: input,hidraw2: USB HID v1.11 Mouse [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-3/input2
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 3-5: new full speed USB device using ohci_hcd and address 3
hub 3-5:1.0: USB hub found
hub 3-5:1.0: 3 ports detected
usb 3-5.1: new full speed USB device using ohci_hcd and address 4
input: HID 05ac:820a as /devices/pci0000:00/0000:00:04.0/usb3/3-5/3-5.1/3-5.1:1.0/input/input3
generic-usb 0003:05AC:820A.0004: input,hidraw3: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:04.0-5.1/input0
usb 3-5.2: new full speed USB device using ohci_hcd and address 5
input: HID 05ac:820b as /devices/pci0000:00/0000:00:04.0/usb3/3-5/3-5.2/3-5.2:1.0/input/input4
generic-usb 0003:05AC:820B.0005: input,hidraw4: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:04.0-5.2/input0
usb 3-5.3: new full speed USB device using ohci_hcd and address 6
scsi 1:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
ata1: link is slow to respond, please be patient (ready=0)
scsi 2:0:0:0: Direct-Access APPLE SD Card Reader 1.00 PQ: 0 ANSI: 0
sd 1:0:0:0: [sda] 3905536 512-byte logical blocks: (1.99 GB/1.86 GiB)
sd 2:0:0:0: [sdb] Attached SCSI removable disk
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: [sda] Attached SCSI removable disk
ata1: COMRESET failed (errno=-16)
ata1: link is slow to respond, please be patient (ready=0)
ata1: COMRESET failed (errno=-16)
ata1: link is slow to respond, please be patient (ready=0)
ata1: COMRESET failed (errno=-16)
ata1: limiting SATA link speed to 1.5 Gbps
ata1: COMRESET failed (errno=-16)
ata1: reset failed, giving up
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: Attached scsi generic sg1 type 0
eth0: register 'asix' at usb-0000:00:06.1-2, ASIX AX88772 USB 2.0 Ethernet, 58:55:ca:24:b3:52
usbcore: registered new interface driver asix
UDF-fs: Partition marked readonly; forcing readonly mount
aufs 2-standalone.tree-33-20100426
loop: module loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
aufs test_add:248:mount[967]: uid/gid/perm /tmpfs/mnt/overlay 0/0/0755, 0/0/01777
aufs test_add:248:mount[972]: uid/gid/perm /tmpfs/mnt/root-image 0/0/0755, 0/0/01777
udev: starting version 151
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
input: PC Speaker as /devices/platform/pcspkr/input/input5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input8
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input9
ACPI: Power Button [PWRF]
ACPI: SSDT 7f71dc98 001FB (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
ACPI: SSDT 7f71c618 005A6 (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
Monitor-Mwait will be used to enter C-1 state
applesmc: Apple MacBook Air detected:
applesmc: - Model with accelerometer
applesmc: - Model with light sensors and backlight
applesmc: - Model with 15 temperature sensors
Monitor-Mwait will be used to enter C-2 state
Linux video capture interface: v2.00
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
ACPI: SSDT 7f71df18 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
ACPI: SSDT 7f71bf18 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
ACPI: AC Adapter [ADP1] (on-line)
Switching to clocksource hpet
uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:850a)
input: Built-in iSight as /devices/pci0000:00/0000:00:04.1/usb1/1-6/1-6:1.0/input/input10
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
ACPI: Battery Slot [BAT0] (battery present)
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2c/LNXVIDEO:00/input/input11
ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
applesmc: wait status failed: 5 != 0
HDA Intel 0000:00:08.0: power state changed by ACPI to D0
HDA Intel 0000:00:08.0: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 17
HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 17 (level, low) -> IRQ 17
hda_intel: Disable MSI for Nvidia chipset
HDA Intel 0000:00:08.0: setting latency timer to 64
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
applesmc: failed to init the device
applesmc: 1 fans found.
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
input: applesmc as /devices/platform/applesmc.768/input/input12
Registered led device: smc::kbd_backlight
applesmc: driver successfully loaded.
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
this is lspci -vvv output
00:00.0 Host bridge: nVidia Corporation Device 0d60 (rev a1)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.1 RAM memory: nVidia Corporation Device 0d68 (rev a1)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.0 RAM memory: nVidia Corporation Device 0d6d (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:01.1 RAM memory: nVidia Corporation Device 0d6e (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:01.2 RAM memory: nVidia Corporation Device 0d6f (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:01.3 RAM memory: nVidia Corporation Device 0d70 (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:02.0 RAM memory: nVidia Corporation Device 0d71 (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:02.1 RAM memory: nVidia Corporation Device 0d72 (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:03.0 ISA bridge: nVidia Corporation Device 0d80 (rev a2)
Subsystem: Apple Computer Inc. Device cb89
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: I/O ports at 2100 [size=256]
00:03.1 RAM memory: nVidia Corporation Device 0d7b (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:03.2 SMBus: nVidia Corporation Device 0d79 (rev a1)
Subsystem: nVidia Corporation Device cb89
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 15
Region 0: I/O ports at 2000 [size=256]
Region 4: I/O ports at 2240 [size=64]
Region 5: I/O ports at 2200 [size=64]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:03.3 RAM memory: nVidia Corporation Device 0d69 (rev a1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:03.4 Co-processor: nVidia Corporation Device 0d7a (rev a1)
Subsystem: nVidia Corporation Device cb89
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 14
Region 0: Memory at 93200000 (32-bit, non-prefetchable) [size=512K]
00:04.0 USB Controller: nVidia Corporation Device 0d9c (rev a1) (prog-if 10 [OHCI])
Subsystem: nVidia Corporation Device cb89
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 20
Region 0: Memory at 9328a000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci_hcd
00:04.1 USB Controller: nVidia Corporation Device 0d9d (rev a2) (prog-if 20 [EHCI])
Subsystem: nVidia Corporation Device cb89
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at 9328b100 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port: BAR=1 offset=00a0
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: ehci_hcd
00:06.0 USB Controller: nVidia Corporation Device 0d9c (rev a1) (prog-if 10 [OHCI])
Subsystem: nVidia Corporation Device cb89
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 18
Region 0: Memory at 93289000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: ohci_hcd
00:06.1 USB Controller: nVidia Corporation Device 0d9d (rev a2) (prog-if 20 [EHCI])
Subsystem: nVidia Corporation Device cb89
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 21
Region 0: Memory at 9328b000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port: BAR=1 offset=00a0
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: ehci_hcd
00:08.0 Audio device: nVidia Corporation Device 0d94 (rev a2)
Subsystem: nVidia Corporation Device cb89
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 17
Region 0: Memory at 93280000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: HDA Intel
00:0a.0 IDE interface: nVidia Corporation Device 0d85 (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: Apple Computer Inc. Device cb89
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 25
Region 0: I/O ports at 2298 [size=8]
Region 1: I/O ports at 22a4 [size=4]
Region 2: I/O ports at 2290 [size=8]
Region 3: I/O ports at 22a0 [size=4]
Region 4: I/O ports at 2280 [size=16]
Region 5: Memory at 93284000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] SATA HBA v1.0 InCfgSpace
Capabilities: [b0] MSI: Enable+ Count=1/8 Maskable- 64bit+
Address: 00000000fee0300c Data: 4181
Kernel driver in use: ahci
00:0b.0 RAM memory: nVidia Corporation Device 0d75 (rev a1)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 0
Region 0: Memory at 93288000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
00:15.0 PCI bridge: nVidia Corporation Device 0d9b (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: 93100000-931fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: nVidia Corporation Device 0000
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
Address: 00000000fee0300c Data: 4151
Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
Mapping Address Base: 00000000fee00000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #0, PowerLimit 0.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg+
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Kernel driver in use: pcieport
00:17.0 PCI bridge: nVidia Corporation Device 0d76 (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 92000000-930fffff
Prefetchable memory behind bridge: 0000000080000000-0000000091ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: nVidia Corporation Device 0000
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
01:00.0 Network controller: Broadcom Corporation Device 4353 (rev 01)
Subsystem: Apple Computer Inc. Device 00d1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 14
Region 0: Memory at 93100000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=2 PME-
Capabilities: [58] Vendor Specific Information: Len=78 <?>
Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [d0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <64us
ClockPM+ Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [13c v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 1c-11-ca-ff-ff-f5-58-55
Capabilities: [16c v1] Power Budgeting <?>
02:00.0 VGA compatible controller: nVidia Corporation Device 08a3 (rev a2) (prog-if 00 [VGA controller])
Subsystem: Apple Computer Inc. Device 00d3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 92000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at 80000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at 90000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at 1000 [size=128]
Expansion ROM at 93000000 [disabled] [size=128K]
Capabilities: [60] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [e0] Vendor Specific Information: Len=14 <?>
Last edited by steamedfish (2010-12-14 18:13:28)Try booting the fallback kernel, there is a problem with the AHCI driver concerning new Macbooks. When you've booted, add ata_generic to the modules in /etc/mkinitcpio.conf and rebuild the initrd with mkinitcpio -p kernel26.
-
I am trying to get audio to play through the soundbar attached to the TV for great sound. Works fine with Apple TV, but on the MacBook Air, system preferences will only find the TV speakers. If I change the settings on the TV to external speakers (the soundbar), then I get no sound at all. The HDMI connection does what it is supposed to do, providing video and audio, but the audio can only go to the TV. I don't know if you can go backward and send only video through HDMI and then connect to the soundbar through the mini jack ports on the computer and the soundbar. Any solutions will be appreciated.
its important to do this in the correct order so the camera will be senced by the Mac and to prevent the Firewire connection from electrical damage:
power down your Mac
connect firewire from camera to Mac
power on camera and insert tape in camera and play back
power up Mac
start QuickTime
File > Preferences > record tab
video source - select the camera you have
sound source - select the camera you have
quality - select device native
the video should show in the QuicTime window
a green line below video will show presence of sound-it will play through the speakers if they are selected in system prefernces
rewind tape and playback
click on red button to start recording -
I have a new MacBook Air running Yosemite 10.10.1 with Quicktime 7 but would like to know if I can view my .mkv files on Quicktime 7 or are there any approved software I can run that's safe for Yosemite 10.10.1.
Hello kimosabe0731,
Welcome to the Apple Support Communities! At this time, QuickTime does not support the playback of .mkv files. For more information, see the following resource:
Media formats supported by QuickTime Player - Apple Support
http://support.apple.com/en-us/HT201290
Cheers,
Matt M. -
i just got the macbook air for christmas and i also got the dr dre headphones so i am trying to enable my soundcheck on my iTunes but i cannot figure out how to find where sound check is located can someone please help!!
Go to the iTunes menu > Preferences > Playback.
-
Crazy Question: Could you run FCS2 on a Macbook Air?
Looking at minimum system requirements for FCS2, and the specs on the macbook Air, I was wondering... would it be possible to run FCS on an Air? From a practicality perspective probably not the most sensible thing to do, but would it work? The only thing I see as an issue is the requirement for the AGP or PCI Express graphics card. The Air has no firewire port, but if you're editing offline media you cold be working off USB2 (I've used my 30GB iPod as an external HD in a couple of situations). No way to digitize material though, would there?
I have no plans to do this, just morbidly curios.Mike pulls it apart pretty well but its all from a very elitist point of view ... not that I disagree with him per se, but if I were playing devils advocate ...
Processor: While that is faster than some of the G5s shipped a few years ago, and plenty fast enough to cut most formats, that is still pretty poky these days.
why add the caveat? the first part "plenty fast enough to cut most formats" says it all.
RAM: The default RAM config is 2GB - not bad... you can’t add any more. 4GB is my usual dead minimum
just because 4GB is a good recommendation its far from required. in fact FCP runs fine on even less than Apples own recommended minimum of 2GB. (of course "fine" in this context is subjective!)
*Hard drive/storage options:* If you were to install the full Final Cut Studio 2 suite, you’d have installed 55GB of goodies, leaving you with precious little room ...
if we're looking at a base FCS install not a full content install then theres plenty of room on the drive for the apps only. the real issue is media storage, and oh my goodness, I remember getting my first 15GB drive (got two of them, cost me an arm and a leg) and I thought I had all the storage I'd ever need. of course this does present the issue of less than perfect performance with media, apps and OS all on the same drive ... but performance is relative if you're looking for an offline / low data rate edit system it will be fine. (we're not looking at this as a "primary" edit system right?)
GPU: This is a serious limitation ... But for some simple editing, this is survivable
No contest on this one
FireWire? :No FireWire, anywhere.
Bummer ... although many newer cameras connect via USB
*USB 2.0*: you could attach a USB 2.0 drive for additional storage, right?
Yes you could, so once again, no need for the further (dis)qualifications. You could also import from one of them swanky new Sony EX1's, or from Sony's U1 XDCAM drive Pretty nifty. The MB Air should be able to handle cutting with these low datarate codecs without any problem...or if you're into hoops then you could use it as a field unit to cut with the low res proxies from these cams.
Expansion?: Powerbooks had the older slot that gave them P2 compatibility. MacBook Pros have the newer slot, compatible with the newer SxS cards used with Sony’s very promising XDCAM EX camera, the EX1. This Mac has neither option - again, no way to import footage.
See *USB 2.0*
Battery: ...You MUST plug into a wall to recharge...
90% of field work is done plugged into a socket, in a hotel room or maybe in the back of a car running from the cigarette lighter
Ethernet and 3G
mostly irrelevant -
I am using a late 2010 MacBook Air now updated to OSX Mountain Lion (10.8.2. Version). It works great but since I have updated it to OSX Mountain Lion I am having the following problem:
1.- I work as usual with my MBA and when my work is finished I shut it down normally, closing first all the opened apps (the shut down from the Apple menu located at the top left corner of the screen).
2.- When I turn on my MBA again (form example at the next day or a few hours later and I introduce my password) a lot of letters and words appear in my screen (over a black canvas) and then a message saying "Your computer was restarted because of a problem. Press any key to restart it or wait a few seconds" (something like that). Then appears a report and the MBA says that it will be sent automatically to apple. It happens everyday.
3.- So, I have to wait some seconds and this cause that the starting time of my MBA had increased too much, even I have to introduce my password again for restarting my MBA.
Can anybody knows the solution to this concern and provide me advice or help? thank you very much in advance !!OS X: How to quit an unresponsive application using Force Quit
Maybe you are looking for
-
Hi Since I have updated to IOS7 I keep getting a window coming up asking me to sign in to icloud. However the icloud icon is showing my old email address and doesn't match up to my Apple ID, so the passwards do not match, and this box keeps appearing
-
Custom button goes missing after click the button in Customer Master
Hi All, I have one query regarding Custom tab button in Custome MAster.I have implemented BAdIs using CUSTOMER_ADD_DATA_CS and CUSTOMER_ADD_DATA to match my requirment. Query: While click the custom button(which i have created in Customer Master) ,
-
I have the right update of itunes but my iphone wont connect to itunes? What do i do?
I have the right update of itunes but my iphone wont connect to itunes? What do i do?
-
Downloading Free Trial via CreativeCloud?
Hi, I've downloaded creative cloud and I'm looking to download the free trial of premiere. Whenever I click the download trial button (that's found here https://creative.adobe.com/products/premiere) it opens up in creative cloud - however there is no
-
EAS 11.1.1.3 Issue with constant CPU spike
Hi Gurus, I have EAS 11.1.1.3 installed on a Windows 2003 EE server with 2 quadcore 2.4 GHz CPUs and 32GB RAM. Other components on the server include FR, WA and APS. At least twice a month, I notice in task manager that the EAS process runs at 48% of