FCP 7/ Sync issue in the canvas and viewer-not in timeline.

I am using FCP 7 on a Mac Pro. I am seeing an audio/ video sync issue in the canvas and viewer if I display at anything less than 50%. at 50% the video is choppy, but will play in sync. If I adjust between 50% and 25% or less, I can actually see the frame change without moving the play head. Has anyone else experienced this and found a solution?

Thank you for the advice MtD. This content was encoded using H264 compression, but I have the option within my media encoder application to create only i frames-no B or P frames. This gives me a high quality file that is supposed to be much more "edit friendly" than standard H264.
I'm in an environment where re-rendering to Apple ProRes is not always an option. I have imported H264 content before and found no issue when trying to playback in the canvas. One odd thing I did encounter with my "problematic" file is that though I capture this at 23.976fps, Quicktime Player identifies the frame rate as 23.97fps and Final Cut then interprets this as 59.94fps. I thought this might be the culprit, but even after adjusting my frame rate to 23.98fps, and FCP7 importing as 23.98fps-the odd sync issue still appears in the canvas when displaying at less than 50%.
I will take your advise and re-render to Apple ProRes when that is a possibility.
Thank you.

Similar Messages

FCP Multicam Sync Issues

i am edited a project in final cut using the multicam feature. sometimes the canvas and viewer will not sync, or i cant get any angle but the active one on the viewer. this is very frustrating, its wasting a lot of my time. what can i do to avoid this? thanks
Final Cut 5.1.4 and i edit from a external hard drive.

"sequence error, unable to add clip to sequence. possible media limits problem in clip or sequence."
I've not seen that message before. Any chance of re-acquiring the media...could be corrupt somehow.
Could be your external drive is going bad.?.?
RE: OS/FCP/QT combo...
These links show best combos and has QT downloads.
http://www.digitalrebellion.com/blog/cats/28/index2.html
http://www.digitalrebellion.com/blog/posts/listof_quicktimedownloads.html
Did your Tiger disks go away with your tower? Not sure of best options to get another set, others might have some insight.
I'd try to exhaust all other possibilities before any downgrade.
-Delete prefs
-Run Disk Warrior on external...or at least Disk Utility/Repair disk
-Confirm media settings exactly match sequence settings.
-What type of external drive and how is it connected.
2 streams of DVCam shouldn't be an issue on a laptop.

Clips invisible in timeline as canvas and viewer playback become erratic.

cutting a feature on the fcp... has anyone else had the problem where, at some point, the clips and thumbnails cut into the timeline start failing to appear (although they are, indeed, present). simulaneous with this issue, the canvas and viewer become erratic. for instance, i can't drag across the timeline and have it appear in the canvas unless i hit the spacebar first... same with the viewer.
i had this problem earlier and thought it was corrected when i increased ram and disk space allocated to thumbnails and lessened the amount of memory allocated to fcp. this helped for a while but now, as the feature edit grows longer, the above problems have reappeared.
any thoughts? thanks.

Shane's Stock Tip Mantra: If the program was working
fine, and now isn't, or just isn't working the way it
should, the first things to do are:
1) Trash your FCP preferences. Download the
appropriate version of FCP Rescue at
http://fcprescue.andersholck.com/ and run it.
2) Open the Disk Utility and Repair Permissions.
3) (optional) Sacrifice a goat on the eve of the
first Full Moon of the month. Results may vary.
Shane
thanks for the response shane... this may sound naieve but i'm new to fcp... does trashing the preferences affect the work i've already done on the timeline-- which is considerable.
also... the hyperlink you supplied wouldn't open for me. is it typed accurately?
finally... i have my wife's yorkshire terrier for sacrifice. would that be a suitable substitute?
thanks again.

Canvas and viewer won't display video correctly

I have just reinstalled and then reinstalled 5.1.4. Picture plays on external video monitor but will not play in either canvas or viewer. RGB is set. Mirror on playback is set. Audio will play. Viewer will play on external monitor. Usually a still will be on viewer of canvas screen or just a jumbled mess. Sometimes with parts of display frame included in mess. Thanks for any help.

Thanks for posting helpful info re my problem. Issue finally resolved. FYI in case you should encounter a similar problem. I failed to mention in my post I was running two video displays. The video card I was running on when I developed the problem had been my auxilary display and was too underpowered to run the canvas and viewer. I inadvertaintly switched final cut pro to that card and monitor when my previous main monitor quit. I simultaneously had a drive boot problem. All is well that ends well, I suppose. Only took 4 days to sort it out and could find no info in tech manual that would have led me to this.

Canvas and View have gone green

The canvas and viewer windows in our FCP 5.4.1 are green and will not display video. We've restarted computer, and then re-installed FCP. FCP has been working well on this computer for over a year. Any ideas? Thanks.

sounds like something corrupt in your preference files
FCP uses these files to configure your set up ... when things go screwy its often a good place to start
note: reinstalling FCP doesn't help in this instance, because the preference files are not part of the install.
trashing your prefernce files can be done mnaually
but even easier is to use a nice bit of freeware caled FCP Rescue which is designed to perform this task ... it also lets you make a backup of your settings when they are good, which you can restore later if things go screwy again
you can grab it here: make sure you download the version that matches your version of FCP
http://fcprescue.andersholck.com

Image Doubling in both Canvas and Viewer

Hey Guys, don't know why this is happening as I didn't change any settings, but when I reopened my edit I'm getting this weird Doubling of the image effect in both the canvas and viewer... Need to finish this and this doubling is killing me, already tried trashing prefs, no mirror filters on the clips, happens for entire sequence....Happening in multiple projects. Any ideas?

Okay so I figured it out, but I'm not sure what it is... if you look in the top right hand corner of my screen, where the volume bar (not in the screen grab cause I had quit the app) there is a rounded corner blue box. When I clicked it a drop down menu shows and it was on Free View, I switched it to 2D and problem solved. Now, new problem, I have no idea what this is or why its on my menu bar. Any one know? Something to do with my Dual Displays?

HT4623 I have a 1st gen iPad. Upgrade to iOS 6.1.1 appeared, but it quit shortly into it and now I am being told that all software is up to date at 5.1.1! Synced iPad to the iMac and it also says the iPad is up to date. What gives?

I have a 1st gen iPad. Upgrade to IOS 6.1.1 appeared, but it quit shortly into the installing and has not come back up again. Both the iPad and when synced to the iMac, say i am fully up to date at 5.1.1! Has anyone had / got the same issue? How can I upgrade when it doesn't acknowledge there is no need?

You are most welcome

Hi, I've just downloaded the latest release 10.1.1 and now I do not see any more correctly my clips either in the canvas and in the timeline. Playing clips, they now appears with garbled images, completely unstables: I can not editing in these conditions!

Hi, I've just downloaded the latest release 10.1.1 and now I do not see any more correctly my clips either in the canvas and in the timeline. Playing clips, they now appears with garbled images, completely unstables: I can not editing in these conditions!
Anyone can help me?
Thank you, Claudio

Hi Russ, Thank you for your reply!
System Spec:
2x2.26 Ghz QUAD-CORE
12 GB RAM 1066 MHz DDR3
I've stored the library in HARD DISK which is installed inside my computer (1 TB capacity) and different from my hard disk in which I've installed all my applications (600 GB capacity).
I've installed FCP since 2001, bought FCP X in 2012: never had a problem. Yesterday I was editing my video of my last vacations (in California!) and I have updated FCP X, downloading FCP X 10.1.1: then the problem!
Strange is the fact that I've just tried to export a short project, I can see the final product quite well.
What is impossible is playing the clips within Final Cut: they are jumpimg, moving, presenting some frame in green or red ...
Everything all right in iMovie.
I've just checked the RAM: 9GB out of 12 GB is busy, could this be the problem?
Motion is very slow: for 20 sec of project, it takes minutes to play. And once again, if you finalize the projet and export it in Quicktime, you can see it correctly.
I do hope you may suggest something, I'm getting crazy!
Thank you in adavance
Claudio

FCP Canvas and Viewer

My FCP canvas and viewer appears to be showing my 16:9 footage in a letterbox format - not the same as usual - normally when I make the canvas full screen the footage will fill the screen - but now it is letter boxed, if you see what I mean!?
I am using FCP 5.0.4
Can anyone help please?

Widescreen mode can mean either letterboxed or anamorphic. Select a clip in the browser (or in the timeline for that matter) and hit command-9. Is the anamorphic check box, checked? If not, your original material is letterboxed and you've either got to live with it, or enlarge your images which will lose an enormous amount of quality. If your clips are anamoprhic, you've got to check the anamorphic check box in your sequence settings, then select all your clips, control click and choose remove attributes:basic motion. Should do the trick.
This can be avoided by making sure your sequence settings match your clip settings BEFORE you start editing.

Canvas and Viewer issues

All of a sudden, can't see vid footage on the viewer or canvas. Hear audio. Clips are in the timeline. 4 hours trying to fix it. Never happened before. People with similar issues have apparently gotten cryptic answers so far. Pleasse! someone who ACTUALLY knows a resolution respond. I am standing by.
Thank you
Boe

Try this:
Shane's Stock Answer #15: White or Black Canvas or Viewer
Make sure the canvas or viewer are selected then go to VIEW>CHANNELS and set it to RGB. It might be set to ALPHA.
OR...
Click on the drop down menu above the Viewer or Canvas and make sure that you are on IMAGE or IMAGE + WIREFRAME.

Issue in FF v 3.6.10: I have a page which have more than 20 link, clicking on these link opens up a popup using window.showModalDialog, for the first 20 popup opens up without any prob but for the 21st n more click it block the popup and do not open.

Issue in FF v 3.6.10: I have a web page which have more than 20 link, clicking on each of these link opens up a pop-up using window.showModalDialog, for the first consecutive 20 popup opens up without any prob but for the 21st n more click it block the popup and do not open. This is m problem, the real user on the web page can click on more than 20 link in such a scenario it may create problem, please help

Your above posted system details show outdated plugin(s) with known security and stability risks.
*Shockwave Flash 9.0 r999
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
In Firefox 3.6 and later versions you need the Next-Generation Java™ Plug-In present in Java 6 U10 and later (Linux: libnpjp2.so; Windows: npjp2.dll).
http://java.com/en/download/faq/firefox_newplugin.xml
See also http://java.sun.com/javase/6/webnotes/install/jre/manual-plugin-install-linux.html

I just got my new i phone 5 s and did all the syncing and backing up for my old iphone 4s and set my 5 up and synced it on itunes it synced evrything but the contacts and othe minior things were the only things that really transfered my apps and all my

I just got my new i phone 5 s and did all the syncing and backing up for my old iphone 4s and set my 5 up and synced it on itunes. It synced evrything but the contacts and other minor things. those were the only things that really transfered. My apps and all my music did not. Tthe thing is when i just went to go manually start dowmloading a few of the songs that i knew i already bought , itunes is making me pay forthem again. Its not saying instal like it usuall does when you go download something aleady purchased on your itunes account. I think or thought it might have something to do with the fact that i just changed my apple id name right before i got my new phine but my apps all re-downloaded (manually-no syncing) without making me pay for them again. i dont want to have to purchase allllll my songs again. Can someone please help me!! Itried going back to my old id or signing out of this id and signing in as my old apple id but now it wot even get on that oneits likjeit doesnt exist anymore.. And when i plug my old phone it shows in the itunes everything thats supposed to be there but all that doesnt stay in the itunes when i actually un plug it so when i plug my 5 in to my computer none of the stuff is in the store for me to actually transfer it I am so good with technology and this has me stumped please help

No it's not stealing. They have an allowance that you can share with so many computers/devices. You'll have to authorize her computer to play/use anything bought on your acct. You can do this under the Store menu at top when iTunes is open on her computer.
As far as getting it all on her computer....I think but I am not sure (because I don't use the feature) but I think if you turn on Home Sharing in iTunes it may copy the music to her computer. I don't know maybe it just streams it. If nothing else you can sign into your acct on her computer and download it all to her computer from the cloud. Not sure exactly how to go about that, I haven't had to do that yet. I wonder if once you authorize her computer and then set it up for automatic downloads (under Edit>Preferences>Store) if everything would download. Sorry I'm not much help on that.

I have the newest version of the iPad and can not see it under devices in my iTunes account on my PC. I can however see my iPod touch under devices and sync it. How can I get my iPad to show under devices and sync as well?

I have the newest version of the iPad and can not see it under devices in my iTunes account on my PC. I can however see my iPod touch under devices and sync it. How can I get my iPad to show under devices and sync as well? I have also tried may suggestions on the apple support site and none have worked. Any suggestions are welcome.

You need iTunes version 11+.
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
 Cheers, Tom

I just purchased a ipad 2 and have not sync it yet. I have an old pc and would like to move the itunes library account to a newer pc that I have. Can I move the library to the ipad and sync ipods to the ipad and/or move the library to the new pc?

I just purchased a ipad 2 and have not sync it yet. I have an old pc and would like to move the itunes library account to a newer pc that I have. Can I move the library to the ipad and sync ipods to the ipad and/or move the library to the new pc?

Perhaps this web page will help: http://support.apple.com/kb/ht1229
But I must point out that leaving the iPhoto Library on the external is worth considering. Your internal drive would be better off without having to carry the photos.
When you booted with the external connected and you were asked for the library, did you try navigating to the Library in on the external drive?

Wifi keeps scanning and dropping even after connected to home network. Never had this issue until the update, and now my phone runs slow and terrible. Horrible update!! Any ideas on a fix?

Wifi keeps scanning and dropping even after connected to home network. Never had this issue until the update, and now my phone runs slow and terrible. Horrible update!! Any ideas on a fix?

It's important that you have a steady WiFi connection, ZealousEdge. What phone do you have? Is your phone unable to connect to any WiFi network? If you can, please try deleting the saved WiFi network and re-adding it.
AndreaS_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

FCP 7/ Sync issue in the canvas and viewer-not in timeline.

Similar Messages

Maybe you are looking for