FCP 7 will not capture 1920x1080p with Prores 4444

Normally when I capture 1080p material from our Sony HDCAM, I capture with Prores HQ, but since upgrading to FCP 7 I wanted to try the new Prores 4444 to see how much better it is and how big the files created are. But, no matter what I do when capturing the file ends up being only 960x540. All settings are 1920x1080p. What is wrong. Is it a bug?
I use Blackmagic HD capture cards.

Hmmm, I seem to remember reading similar reports about this somewhere ... will try to find them and post a link. In the meantime make sure you are running FCP 7 compatible drivers for your BMD card.
http://www.blackmagic-design.com/support/software/

Similar Messages

G5 - Leopard Upgrade & FCP will not capture instead causes Crash of FCP.

I looked elsewhere on the forums and could not find my same problem.
After the upgrade to Leopard with my FCP it all seems to work just fine. Unless I try to capture. And at that point FCP crashes. I have this same thing happening on 2 machines. Where before the upgrade it was all fine. This happens with or without camera attached.
Any ideas?
FCP version 5.0.4
OSX 10.5
One thing you would like to hope is that Apples stuff works on their system. I really do not want to upgrade computers this week.
I have tried reinstalling the software (FCP again), I have repaired permissions.
Thanks for any help
Christopher

I have the same problem, log and capture just crash if I have the HDV capture preset selected, I cannot capture any high definition footage! I am running Leopard, FCP 5 and latest quicktime. It crashes FCP immediately I click on log and capture.

HT200166 I have a Canon XL2 that will not capture video properly in fcp 10, where it does capture properly in fcp6 and 7. How can I "fix" fcp 10 to do this correctly?

My Canon XL2 (1394/firewire 400) will not capture correctly in fcp10, but it did when I had fcp 7 on the same computer. Is there a software fix that will allow me to use the XL2 with this program?

I just want to get this clear.
With FCP 7 and earlier you could capture a whole tape in one continuous 60 minute long clip.
FCP X cannot do that. It is designed to split the tape into its individual clips, however long they may be.
Are you saying that when you try to capture clips of 10 seconds or so, it only captures the first 4 seconds?
All I can suggest is that you trash the preferences with this free app.
Many weird things happen as a result of corrupt preferences which can create a vast range of different symptoms, so whenever FCP X stops working properly in any way, trashing the preferences should be the first thing you do using this free app.
http://www.digitalrebellion.com/prefman/
Shut down FCP X, open PreferenceManager and in the window that appears:-
1. Ensure that only FCP X is selected.
2. Click Trash
The job is done instantly and you can re-open FCP X.
There is absolutely no danger in trashing preferences and you can do it as often as you like.
The preferences are kept separately from FCP X and if there aren't any when FCP X opens it automatically creates new ones . . . instantly.

Sony Handycam HC96 will not capture in Premier CS4

We have a lot of film on a Sony Handycam DCR-HC96. Premiere CS4 running on a MAC sees the camera for control purposes, but will not capture video from it. Since the Handycam only has Firewire 400 output, we are running through a 400 to 800 adapter to get to the Powerbook Pro. Any ideas why Premiere will not capture video from this camera?? Any idea what settings to try??
Thanks

Is the Record button active, or greyed out?
With some cameras, you have to hit the Record button AND THEN the play button to commence capture.
Failing that, you could try hitting PLAY on the camera itself, and then try to activate the Record button in the Capture window.
MP

What is a good video converter for iMac? Premiere 6 will not capture from the Canon VIXIA HF G20.

What is a good video converter for iMac? Premiere 6 will not capture from the Canon VIXIA HF G20.

Rather than convert, you'd be better off capturing with a more current version of the program -- one that supports AVCHD video. Otherwise, you're in for a lot of headache. A converter isn't going to solve your problems.
BTW, when you say Premiere 6, do you mean Premiere 6 -- which is over 10 years old? (There was no Premiere Elements 6.)
Trust me on this: Capture with a Mac version of Premiere Elements 11 or 12 and your video will be perfectly compatible with any Mac program.

HT4528 My apps store will not go online with verizon network, but on wifi it works. I am on an iphone 4, verizon. I tried to do a complete, backup and restore on the phone 1 day before i noticed this problem, The backup finished the RESTORE would fail c

My apps store will not go online with verizon network, but on wifi it works. I am on an iphone 4, verizon. I tried to do a complete, backup and restore on the phone 1 day before i noticed this problem, The backup finished but the RESTORE would fail I had an error, could not access Apple server ( some server name I cant remember).
I have plenty of space available on the iphone,
8gb free,
ios version- 6.1.3 ( 10B329)
carrier - Verizon 14.0
Modem Firmware - 3.0.04
Can someone help.
I tried doing my backup restore on the same computer as I once did a year ago. and THis time I cant do the restore on the iphone.
computer osx is 10.5.8
itunes version 10.
I do not wish to go to ios 7 at this time.

Settings > General > Reset > Reset Network Settings.
Basic troubleshooting is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the issue continues, contact the carrier to troubleshoot the network connectivity issues.

New Ipod touch will not sync up with itunes. No error message, it just doesn't sync

I just bought a new 32 gb ipod touch and it will not sync up with my itunes. I don't get an error message or anything like that, it just does not sync up. HELP!

Have you Authorised your Computer...
Open iTunes and from the Menu Bar select Store...
From the Store menu, choose Authorize This Computer. (In earlier versions of iTunes, access this option from the Advanced menu).
When prompted, enter your Apple ID and password, then click Authorize.
See Here for full details...
About authorization and deauthorization
Also, see here for Syncing...
Syncing with iTunes
http://www.apple.com/support/ipodtouch/syncing/

MBP will not boot up with USB devices connected

I have a late 2010 MBP 15 10.7.2 that will no longer boot up if any USB devices are attached. A dongle, a hub, anything. It goes to the gray screen and stays there. Disconnecting all USB devices the MBP will boot up. Then connecting the USB devices they work. It just will not boot up with anything connected to the USB ports. I have reset PRAM, SMC and fixed disk permissions. Made sure login items are ok, and start up disk is correct. I cant really say when the problem started as it worked fine before, maybe on 10.7.1? Not sure.
Any suggestions for a fix?

I re-installed the 10.7.2 combo. It booted up with a non powered usb 4 port hub but it disabled it. Plugging it out then in again and it works. Looks like the USB firmware has changed somehow in 10.7.2, The hub works on PC's at work no problem, and it worked on the MBP without issue previously. Its not just the non powered hub its a powered hub, and other devices.
Any solutions?

TS3992 My iphone will not back up with iCloud. it keeps popping up a push notification telling me that i do not have enough storage available for the back up. but in my settings and storage it tells me i have 2.8 GB of 5 GB free space, help!?

My iphone 4s will not back up with iCloud. it tells me i dont have enough iCloud storage available, that i can manage my storage in my settings, when i click the settings it tells me i have 2.8 GB free space out of 5 GB. i dont know what to do about this problem. it hasnt been backed up in 3 weeks. and if i still have icloud space avaliable on my phone i do not need to purchase more. i have very few aps backed up on my icloud. i do not understand this help me please

Go to Settings>General>Usage and see how much space is available on your phone (listed at the very top). The pop-up might be telling you that you don't have enough space on your phone to perform the backup, not that you don't have enough space in your iCloud acount to store the backup.

My iPhone 5S suddenly will not sync calendars with iTunes on my iMAC. I recently upgraded the iMAC to version 10.8.5. Am I missing a setting somewhere?

My iPhone 5S suddenly will not sync calendars with iTunes on my iMAC. I recently upgraded the iMAC to version 10.8.5. Am I missing a setting somewhere?

Hey Oynkus,
Thank you for visiting Apple Support Communities.
You state you updated your iMac to OS X 10.8.5. Did you update iTunes as well?
If so, you may find the calendar sync options under Info.
Sync contacts, calendars, and other info with iPod, iPhone, or iPad - iTunes Help
Sync contacts and other info with iPod touch, iPhone, or iPad
Connect your device to your computer.
Click the device button, then click Info.
Select the items you want to sync.
Click Apply.
Take care,
Nubz

Imac 27" Intel Core 7 CPU. Screen goes black and will not respond except with a push of power button. Second monitor connected via displayport continues to display fine. Apply Store did full hardware scan and all is fine. Did clean wipe from Mavrick back

Imac 27" Intel Core7 CPU 16 Gig RAM. Screen goes black and will not respond except with a push of power button. Second monitor connected via displayport continues to display fine. Apply Store did full hardware diagnostic and all is fine. Did clean wipe from Mavrick back to Mountain Lion but problem remains. Apple Store can do no more.

I did some more digging, it appears to be a backlight problem only. I can see the screen very dimly if I use a bright flashlight in a very dark room. It also seems to run ok if the brightness is turned down a LOT.
So I'm thinking this is a LED driver board issue or the display itself. I'll open it up and check the connection between the two and see if I can get any more clues. At least I can use it somewhat now by dimming the display significantly...

Mail will not display images with .jpeg extension. .jpg works fine. (displays in place when opening the email. What plug-in would correct this?

Mail will not display images with .jpeg extension. .jpg works fine. (displays in place when opening the email. What plug-in would correct this?

If you think you're insane now, try maintaining those pop up menus.
As far as I know, these menus have not been updated since FW 8, so
they are at least two versions old.
Save yourself a lot of grief by avoiding those menus. There are many
other products on the market which do a much better job of creating
and maintaining this type of navigation structure.
Read this link before you climb any higher on this slippery slope:
http://apptools.com/rants/jsmenu.php
There was another blog post by the fellow who originally wrote the pop
up menu feature, but I can't seem to locate it. Even he says stay away
from them.
Not the answer you probably want, but I hope it helps, nonetheless.
Jim Babbage

I updated our iPad a week ago to 8.1 (12B410) and since then most apps will not close down with the 4 fingers swiping in.

I updated our iPad a week ago to 8.1 (12B410) and since then most apps will not close down with the 4 fingers swiping in. The only way to close them down is to hit the middle bottom button twice then swipe upwards. Is anyone else having this problem and how do I fix it?

This has been happening to me as well with an iPad 3 running iOS 8.1. This is what I do and it works for me. Toggle the setting for Multitasking Gestures off and then on again, Settings>General>Multitasking Gestures>Off. Then toggle it on again.
I have to repeat the sequence from time to time as I have not found a permanent fix. I think that iOS 8 is by far the buggiest iOS release that I have used since I have owned an iOS device.

Verizon Media Manager will not start automatically with Windows, even though it is set to do so.

Verizon Media Manager will not start automatically with Windows, even though it is set to do so. This started with the latest update. I see that the desktop icon for Media Manager now has a security shield on it, and it requires UAC confirmation when you start it, which I don't remember the old version doing.
One thing I noticed, msconfig.exe shows that "C:\Program Files\Verizon\McciTrayApp.exe" is set to start at Windows startup, but the desktop icon used to start Media Manager manually has a target of ""C:\Program Files\Verizon\Verizon Media Manager\Release\Verizon Media Manager.exe" Verizon Media Manager".
I don't remember what the previous version was, but this one is 9.4.86. It asked me if I wanted to update it a few days ago, and I said yes.
I am running Windows 7 Home Premium.
Solved!
Go to Solution.

Try setting the startup option to off and then to on again. It looks to be pointing to a wrong location.
Attached is a partial screen shot of my msconfig setting.
Attachments:
media manager startup cmd line.jpg ‏18 KB

TS4118 Ever since I got the iphone 5 my phone/icloud calender and contacts will not remain synced with Outlook. I am constantly having to sign in and sign out and unlink and re link to Outlook.

Ever since I got the iphone 5 my phone/icloud calender and contacts will not remain synced with Outlook. I am constantly having to sign in and sign out and unlink and re link to Outlook. this creates multiple categories of contacts and calenders and I have no idea which is syncing with my phone, ipad, outlook. Help. thanks.

Sounds like the Outlook plugin isn't working properly. You could try a couple of things:
Go to Start>Control Panel>Add/Remove Programs, uninstall iCloud, the download and install the iCloud contol panel for Windows again from here: http://support.apple.com/kb/DL1455. Then sign back into your iCloud account and check your syncing settings again.
Uninstall iTunes and all of its components as by following this guide exactly: Windows XP or Windows Vista/7, then reinstall iTunes. You must follow this guide exactly or it will not be successful. (Uninstalling iTunes will only remove the application; it will not touch your iTunes library or data.) This will replace the Outlook plugin.
Then try your calendar again and see if it will sync properly now.

FCP 7 will not capture 1920x1080p with Prores 4444

Similar Messages

Maybe you are looking for