FCP 7 with Share dont work when a Quickcluster is Active (Bug Found).

If you send your sequence with the option share of the new FCP 7 to create a Blu-Ray by example you will get an error who can be something like video file not found with your Quickcluster active.
Share give you the option to select your Quickcluster but that is not working at all guys.
Seem not important but think about creating a H.264 for Blu-Ray , it give you a very long wait ...
For me let get an example : Quickcluster 10 instances for a XDCAM EX of 12 Minutes take 25 Minutes , and for 12 instances it take 22 Minutes , no Quickclusters it take 30 Minutes.
On short project not important but long duration Blu-Ray well not very funny.
I am on a Dual Quad Cores 12 GB ram , i hope Apple will fix this for the benefit of all of us.
Message was edited by: Daniel Goyette

Sorry to report it is not working at all , allways the same message cant find the vido or audio file but in reality it work for the audio file but error occur at the video compression stage.
This is a bug since Apple suggest 1GB per core and i try as low as 4 instances , Without Share i can use with no problem at all 12 instances and it is realy fast and Share offer the selection of Quickclusters.
I short this Mac Pro cant use Share when any Quickcluster is in use as you see but i can use any Quickcluster when Share is not used to do Blu-Ray , so the important feature Share is Useless and since Apple promote it to do Blu-Ray one step we got a serious bug at the moment David.

Similar Messages

Which buttons dont work when you run windows xp

the keyboard for a mac and a pc are kinda different. are there ne buttons that dont work when you run xp with bootcamp?

Only one I can think of (if you're using the latest version of Boot Camp) is the "delete" key won't act as "delete" (such as in ctrl + alt + delete) under Windows. Other than that, every other key should function correctly. (The Apple/CMD key will work as the "Windows key." And the "option" key will be "alt."

Display touch dont works when charges*

Display touch dont works when charges*

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Reports with prompting stop working when moved from Crystal10 to crystal 11

Issue:
We are having trouble with Crystal Reports XI. It appears that the Crystal 10 runtime included the ability to process reports that used prompting. If we run the same report with the Crystal XI runtime, it fails.
I can send a sample of the report.
Error Dialog:
Title: Internet Explorer Script Error
Error Details:
An error has occurred in the script on this page
Line: 1
Char: 1
Error: invalid character
Code: 0
URL: file: /// C:/Program%20Files/Business%20Objects/3.0/crystalreportsviewers11/prompting/js/promptengine_strings_en.js
Do you want to continue running scripts on this page?
Yes/No
Our Configuration:
We use Merge Modules that install Crystal Reports through the browser via a CAB file that we created. It runs a setup executable
The setup executable project that installs CR XI uses the following Merge Modules:
CrystalReports11_RDC_Reportengine.msm
CrystalReports11_RDC_Runtime.msm
CrystalReports11_HotFix_Merge.msm (This is contrived by us from one of your hot fixes)
Observation:
When the install is finished, the folder structure under u2026. Crystalviewers11/prompting do not have any files like they do if we install the development environment.
Question:
What do we need to do to correct this situation?
*why the reports with*
*prompting stops working when it is moved from a Crystal 10 to Crystal 11*
*environment. I believe that it has something to do with Merge Modules*
*because the files under the prompting folder do not populate with the*
*merge module like they do with the full install of Crystal Reports.*
Please help.
Best Regards,
Peter Freeman
Edited by: Vivek Kumar Sharma on May 19, 2009 3:43 PM

We have JDK 1.6 installed. The License Merge Module is not related to
this issue.
The files under \Program Files\Common Files\Business
Objects\3.0\crystalreportviewers11\prompting are not being installed.
If we copy files, into this folder structure the reports work.
One of the Business Object's Merge Modules should install the files
there rather than just an empty folder structure.
I got was able to figure out how to enter a customer support message.
They said that they could not support us because we were not on CRXIR2
(Crystal Reports 11 Release 2).
I found a download for CRXIR2SP4 (same thing service pack 4).
I installed it the Merge Module names changed to include a "_5"
Was:
CrystalReports11_RDC_Reportengine.msm
CrystalReports11_RDC_Runtime.msm
CrystalReports11_HotFix_Merge.msm (This is contrived by us from one of
your hot fixes)
Now:
CrystalReports11_5_RDC_Reportengine.msm
CrystalReports11_5_RDC_Runtime.msm
CrystalReports11_5_RDC_License.msm (should have been included)
*CrystalReports11_HotFix_Merge.msm (not needed anymore)
I will try to put a installer together with these. If this work there
will be some complexity around uninstalling the old one and installing
the new one.

Multiplayer buttons of keyboard dont work when i minimize the itunes

Multiplayer buttons of keyboard dont work when i minimize the itunes,I really need help and this makes me freaking mad.

Hi,
Please see the various suggestions given to a similar question here: [https://support.mozilla.org/en-US/questions/857405]
Let me know if none of those work.
--Edward

Why the -- dont work when i am logged in on linux terminal.

Why the <-- dont work when i am logged in on linux terminal.
when i press <-- (left) when i am logged on sqlplus on linux i only get
SQL> ^[[D
please tell me how i change this..
hugs Gökhan

Why the <-- dont work when i am logged in on linux
terminal.Is "<--" your "Backspace" key or the "left arrow" key ?
On the command line:
1. If you want to set your "Backspace" key to delete the previous character, then run this:
$ stty erase ^H
2. For the "left-arrow-key-not-working" issue, you may want to try this:
$ stty sane
hth,
pratz

My number buttons on my laptop dont work when I use firefox, but they work on internet explorer. what can i do to fix this?

I downloaded the newest version of firefox. now my number buttons dont work, but they do work on explorer. How do I fix this?

Hi,
Please see the various suggestions given to a similar question here: [https://support.mozilla.org/en-US/questions/857405]
Let me know if none of those work.
--Edward

Reader stops working when newest GTK2.0 installed - bug report and proposed fix

Adobe Reader 7.0.9 (Linux i386) stopped working when I installed a batch of updates on Xubuntu Feisty Fawn (7.04). The updates included GTK 2.0, version 2.10.11. The symptom was that upon startup, Reader ended up in a seemingly infinite loop, printing out "expr: syntax error" (when started from terminal emulator). A few debug "echo"'s revealed that the loop concerned function get_gtk_file_ver().
The bug itself is on line 418. The original line is as follows:
echo $mfile| sed 's/libgtk-x11-$[0-9]*$.0.so.0.$[0-9]$00.$[0-9]*$\|$.*$/\1\2\3/g'
- note that there is no '*' in the middle number-matching regexp, so the full expression matches only strings in which the "middle" group is 100, 200, ..., 900.
At this point in the execution, $mfile contains the name of the gtk library .so, in this case, libgtk-x11-2.0.so.0.1000.11. In prior versions (e.g. 2.8.20, which is the current version in Ubuntu Dapper Drake LTS), the minor version had only one digit, and the regexp matched. When the minor version got incremented to two digits, the regexp no longer match because of the missing '*'! As an additional bonus, somehow this leads to the infinite loop (which is *not* good).
A working fix is to add the missing '*' into the regexp. I'd say that a lot of Linux users will be tripping on this issue soon, at least those who keep current on security updates.
I found no sensible way to contact the developers, i.e. a way that wouldn't have to pass a gazillion of customer-service and tech support people, who are most likely just as unaware of the issue as the users...
I hope this issue will be fixed ASAP - after all, it's only one added character, and that'll save a lot of users a lot of hassle.
(and btw, to have the intended effect, the dots in the sed expression should all be escaped with a backslash - now e.g. "libgtk-x11-2.0.sog0.1000.11" matches the sed regexp as well as "libgtk-x11-2.0.so.0.1000.11", but this probably isn't too critical...)

The solutions provided here work, but by accident. The script compares 2104 (2.10.4) to 240 (2.4.0) and sees that it's greater. Adobe will have problems in future releases if the minimum GTK release is, say, 2.10.4 and the user has 2.4.0.
I've crafted a more elegant solution, shown here in "patch" format. I think the reformatting and tab elimination done by HTML will preclude you from pasting this into a file and running "patch", but it's pretty easy to read and is short...
--- /usr/local/Adobe/Acrobat7.0/bin/acroread~ 2007-01-05 14:56:39.000000000 -0500
+++ /usr/local/Adobe/Acrobat7.0/bin/acroread 2007-08-03 09:33:08.000000000 -0400
@@ -409,13 +409,13 @@ get_gtk_file_ver()
fi
mfile=`basename $ifile`
- echo $mfile | grep -q "libgtk-x11-$[0-9]*$.0.so.0.$[0-9]*$.$[0-9]*$" 2>/dev/null
+ echo $mfile | grep -q "libgtk-x11-$[0-9]*$\.0\.so\.0\.$[0-9]*$\.$[0-9]*$" 2>/dev/null
if [ $? -ne 0 ]; then
return 1
fi
- echo $mfile| sed 's/libgtk-x11-$[0-9]*$.0.so.0.$[0-9]$00.$[0-9]*$\|$.*$/\1\2\3/g'
+ echo $mfile| sed 's/libgtk-x11-$[0-9]*$\.0\.so\.0\.$[0-9]*$00\.$[0-9]*$/\1.\2.\3/'
return 0
fi
@@ -455,16 +455,25 @@ check_gtk_ver_and_set_lib_path()
continue
fi
- len_version=`expr length $version`
- base_version=`expr substr "${base_version}0000000000" 1 $len_version`
- len_base_version=`expr length $base_version`
- while [ $len_version -gt $len_base_version ]; do
- base_version=`expr substr "${base_version}0000000000" 1 $len_version`
- len_base_version=`expr length $base_version`
+ ok=true
+
+ while [ -n "$base_version" ]
+ do
+ base_subversion=`echo $base_version | sed 's/\..*$//'`
+ subversion=`echo $version | sed 's/\..*$//'`
+ if [ $subversion -lt $base_subversion ]
+ then
+ ok=
+ break
+ elif [ $subversion -gt $base_subversion ]
+ then
+ break
+ fi
+ base_version=`echo $base_version | sed 's/^[0-9]*\.*//'`
+ version=`echo $version | sed 's/^[0-9]*\.*//'`
done
- if [ $version -ge $base_version ]; then
+ if [ -n "$ok" ]; then
export LD_LIBRARY_PATH="$idir":"$LD_LIBRARY_PATH"
IFS="$OLD_IFS"
OLD_IFS=""
@@ -640,7 +649,7 @@ fi
# Check the version of gtk and update the LD_LIBRARY_PATH if required.
if [ "`uname -s`" = "Linux" ]; then
- MIN_GTK_VERSION="240"
+ MIN_GTK_VERSION="2.4.0"
check_gtk_ver_and_set_lib_path "$MIN_GTK_VERSION" ### returns 0 if found gtk >= 2.4
fi

Does Home Share only work when you are at home? Or once you've shared will the music stay on the computer you've shared it with?

I want to use Home Share to share music in i-Tunes between my desk top and my laptop. Does it work once you're not in the same house?

If you use home sharing to transfer music to your laptop, it stays on the laptop and you can take it anywhere.
Look at Understanding Home Sharing: http://support.apple.com/kb/HT3819 where it says "With Home Sharing, you can stream music and video from one authorized computer to another, or simply drag music between computer libraries. You can also choose to have iTunes automatically import purchases you make on any of your Home Sharing computers to your own library."

ECourse radio buttons dont work when published as a HTML file

Hi Guys
We are creating some eCourse's in Captivate 7 but when they are published in to HTML format the radio buttons don't work - they wont let you click them. (Have tried IE, Chrome and Firefox)
However is you publish the course as swf it works fine - unfortunately the web provider we upload to doesn't support swf so they NEED to be HTML
Any ideas on a fix? We did a chat session to a support guy and he said as a workaround copy all slides to a blank project and publish that which we have done today and the same issue has is there.
Thanks
Adam (Georgiou Group PTY)

Noni,
I am assuming you have Windows 7 and you have SP1 installed
As a testing, please follow these steps :
1) Close Adobe Captivate 7
2) Go to this location : C:\Users\user_name\AppData\Local\Adobe
3) Rename "Captivate 7.0" folder to "1234"
4) Launch Adobe Captivate 7
5) Open any of your projects and then republish it.
If issue still occurs, share one of your project with me ([email protected])
Let me know if your project is > 50 MB
Thanks,
Vikram Gaur

Fcp 7 XML not working when importing to Premier CS5.5

It suddenly stopped working, I could import xml's just fine. The only thing I did before it started happening was do maintenance with OnyX.
Its telling me that the PROJECT APPEARS TO BE DAMMAGE. It points to Users, library, caches, temp Items, then project file name.
Things I've tried...Export different xml's, versions 1 thru 5.
Repair disk permissions.
looked at the temp Items folder, and there's no xml file, Just a dinamiclinkmanager file.
Uninstalled cs5.5. Re-install cs5.5 do updates.
To no avail.
It was working perfectly before.
I also started getting an error 24 when trying to install, had to contact adobe they couldn't help me, finally got it back.
More concerned about the xml right now, just mentioned it in case.

The problem is with the recently exported (FCP) xml's, not with Premier. I just Imported an old xml into premier with no issues.

Issue with Reminders not working when setting it to arrive or leave a location in iOS7.

Hi all,
Tried everything: Called support and reset All setting. Made sure all "location settings" are set. Restored via iTunes as a new phone, checked all setting again, set a reminder to remind me to get gas when I leave my home, and it never reminded me. Also, doesn't remind when I arrive at a location. I have tried this with my wifes phone (iPhone 5) and my daughters (iPhone 4) all running iOS7 and it doesn't work. I never had this issue with iOS6. All other locations services like GPS, maps, & weather working fine. I strongly believe it's a iOS7 bug. Has anyone else experianced this issue?

In case you haven't seen this thread:
https://discussions.apple.com/thread/5329723
Jump to page 5. There is a solution by ben812 that initially worked for me, but after restarting my phone I was back to square one.
I visited the local Genius Bar, and they claim they have not heard of this problem. Whether that is true or not, they know now. One of the employees confirmed that WiFi would need to be on, as the location service checks it first (before using GPS). Seems like a bug, but for now having WiFi on and leaving Reminders running in the background seems to solve the issue.
I hope Cupertino addresses this in an upcoming iOS release.

Scrowing with touchpad not working when pdf file is opened in one of the the browsers tabs

When I have a .pdf open from one of the browser's tabs I am not able to scroll with my touch pad in the rest of the browser's tabs. Once I close the tab with the pdf everything is working fine. I using Firefox on my Toshiba Satellite Pro laptop.

Hi NSHS,
Have you checked to see if your PDF add-on is up to date? You should take a look at the [[Opening PDF files within Firefox]] Knowledge Base article. There is a lot of good information in there. You should try both of the suggested PDF add-ons to see if that fixes the issue.
Hopefully this helps!

Buttons containing URL's dont work when published.

I am using Captivate 3 and when publishing a project as an swf any buttons which include links to external URL’s don’t work.
When the buttons are clicked on in the browser nothing happens, the URL’s seem to have been lost. Other buttons in the project which navigate to other slides carry on working, only external URL buttons have stopped.
Could anyone please help me with this?
Thanks
Rob

Hi there
This could be the Flash Player silently blocking the call.
Click here and follow what is offered
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

DV6-6C50US, Keyboard tone heard and keys dont work when pressed consecutively

DV6-6c50US - windows 7
When I type a key consecutively, it works only once. Example: I type 'business', it appears as 'busines'
Same case with any keys including arrow keys.
I tried various options with Character Repear in Control panel, but no use.
Also, I hear keypad tones which I have never heard in my laptop earlier.
Not sure, how to get this fixed.
Please help.
This question was solved.
View Solution.

Hi,
One thing worth checking is as follows.
From windows Control Panel, open the Ease of Access Centre and click on the link 'Make the keyboard Easier to Use'. If there is a tick in the box next to 'Turn on Sticky Keys' or 'Turn on Filter Keys', remove these and then click Apply to make the change to see if this resolves the issue.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

FCP 7 with Share dont work when a Quickcluster is Active (Bug Found).

Similar Messages

Maybe you are looking for