FCP acts weird when trying to Log Canon HV30 footage HDV

Hi all,
I have made my first recording with my new HV30 in HDV format with CINE mode. I had couple of tapes from my old DV Canon and i have rewinded a tape from the beginning and started to record over it. It worked fine an the image are great on the HV30.
I want to use FCP for editing and i am trying to Log and Capture the recording. *My problem is that FCP capture is horrible slow. It does not update the capture window more then couple of time in a min. Sound is way off the video. If use Capture Now it starts capturing and then FCP freezes after one min and i think it does that just after the first scene shift.*
I have tried to capture to USB and internal disk but no difference.
Running Leopard 10.5.2 on a Core 2 Duo 3Ghz
thanx

Anyone ? It drivez me crazy that i can't log and capture with FCP.
So far i have captured the video with iMovie then imported the footage in FCP.

Similar Messages

  • HELP! Audio Drops Out When Trying to Capture Canon XL2 Footage

    Please help me out here. I'm a freelance camera operator w/ a Canon XL2 and several times now I've gotten calls from the editors saying they're having problems logging my footage, mainly the audio drops out quite a bit, and I'm not talking bout one second for every 2 or 3 minutes. No. It's like every 10 seconds the audio drops in and out.
    What's the deal? Two times the guy was using a Panasonic DVX-100A to capture, another time it was a SONY DSR mini-DV deck. With each incident I had to go over with my XL2 and use it as the capture device, which is a pain.
    The program they're using is FCP HD or 5. But I think even when they just play the tape in their Sony or Pany cameras, the audio may still suck.
    Help me out here, I can't be the only one with this problem.
    Thanks.
    -R

    Well Robert Swanson, I hope my post wasn't taken offensively, it certainly wasn't meant as such. The only Canon camcorder I owned was the GL1. After switching to Sony's I can honestly say it would take something significant to go back. And, I was merely relating my experiences in trying to capture from other Canon camcorders so that I know where you are coming from. However, I am interested in the HVX being the "noisest" camera on the market. I am seriously considering this camera and would be interested in a review that points this out. I would be using the hard drive recorder instead of P2 cards.
    Mike

  • I keep getting an error message when trying to log on to FaceTime and iMessage on my iPad mini with wifi...could not sign in. Please check your network connection and try again. Help!

    I keep getting an error message when trying to log on to FaceTime and iMessage on my iPad mini with wifi...Could not sign in. Please check your network connection and try again. Help!

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
     Cheers, Tom

  • I get error message "unknown error" When trying to log on to itunes via pc, help please!

    I get error message "unknown error" When trying to log on to itunes via pc, help please!

    Hello, trolle56.
    Thank you for the question.  You may find these articles helpful in troubleshooting the error received with the iTunes Store. 
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/ts3297
    Cheers,
    Jason H. 

  • Error ORA-12560 prompts when trying to log in to the Enterprise Manager

    Hi all,
    I am a newbie to Oracle.
    Just installed the Oracle 9i Database Enterprise Edition (9.0.1) into Windows Server 2003 Standard Edition. Problem is encountered when trying to log in to the Enterprise Manager Standalone mode using either system/oracle or scott/tiger as credentials. Error "ORA-12560: TNS:protocol adapter error" prompts.
    I tried to check with some configuration and see whether the services are started. Services of "OracleOraHome90TNSListener" and "OracleServiceORCL" have been started and the database exists in the dedicated directory. Environment variables of "ORACLE_HOME" and "ORACLE_SID" have been added manually as the SID is set to orcl, which I just follow what the instruction manual has stated. Moreover, I can't get access using command prompt typing "svrmgrl"; error returned stating " 'svrmgrl' is not recognized as an internal or external command, operable program or batch file."
    Another information is that there is no domain set in my server. Just a server with a name being assigned in a workgroup.
    Hence, would you mind please advice me what to do in order to get access into the Enterprise Manager? It's quite an urgent task.
    A million thx in advance!
    Best Regards,
    Karen

    Hi Jigneshrp,
    Thanks for your reply.
    It is checked that the listener is running and TNS name service exists. Following your advice, I did create a new listener and another name service and use them, but the same error turns out when trying to log in to the Enterprise Manager again.
    Additional information to take note for is that while reconfiguring the existing listener or creating a new listener, a mesage prompts stating "The information provided for this listener is currently in use by other software on this computer. You can proceed with the configuration as it is, but it will not be possible to start this listener until the conflict is resolved. Would you like to continue with the continue with the configuration anyway? Yes/No".
    As for the reconfiguration or the new creation of TNS names service, when I am trying to test for the connection, the results in the details pane states that "Connecting... ORA-12560: TNS:protocol adapter error. The test did not succeed...."
    Would you mind pls advice me on these?
    Furthermore, there exist 2 questions I am wondering is that it is stated in the instruction manual that prior to the installation, a static IP should be specified for it instead of the DHCP one; hence, I wanna ask after the complete insallation, is it that the server should be running in the network, i.e. allow it to get connected with the outside network?
    2nd question is that can Oracle 9i Database Server Standard Edition (9.0.1) be installed under a Windows Server 2003 Standard Edition and just a Window XP Professional?
    Thanks for your reply.
    Best Regards,
    Karen

  • When trying to log on to the iTunes store I get the message 'We could not complete your iTunes store request. The network connection was reset'.

    When trying to log on to the iTunes store I get the message 'We could not complete your iTunes store request. The network connection was reset'.  I can access my account on a different PC but not my own.  Can you advise me as to what I should do please?

    Hello donnafromwakefield,
    The article linked below details steps that can help restore your computer's ability to connect to the iTunes Store.
    Can't connect to the iTunes Store
    http://support.apple.com/en-us/TS1368
    Cheers,
    Allen

  • Error CNDP/005 when trying to log into a SAp System

    Hello everyone,
    when trying to log into a SAP System, i get the following dump:
    Error analysis
        Short text of error message:
        Control Framework: Data stream error. Transaction terminated.
        Long text of error message:
         Diagnosis
             The data stream from the frontend could not be interprete
         System Response
         Procedure
             This error is very probably due to an error in the fronte
             software installation or an obsolete version. Inform your
             administrator.
         Procedure for System Administration
             The frontend should have at least the same version as the
             release. Install the correct frontend. If the error conti
             occur, inform SAP.
        Technical information about the message:
        Message class....... "CNDP"
        Number.............. 005
        Variable 1.......... " "
        Variable 2.......... " "
        Variable 3.......... " "
        Variable 4.......... " "
    It occurs directly after inserting my User/Password and pressing enter.
    My SAP GUI: Version 710, Patchlevel 11
    The strange thing about that:
    Last week i didn't have this error and i didn't change anything.
    I already uninstalled, reinstalled and rebooted but it didn't work.
    I would appreciate some help.

    I upgraded to patchlevel 13, which solved the problem.

  • What to do when trying to log into my iCloud and it says "this apple iD is valid, but it's not an iCloud account"?

    What to do when trying to log into my iCloud and it says "this apple iD is valid, but it's not an iCloud account"?

    If you have not already created an iCloud account elsewhere you cannot do so on  PC, and that is the error message you will get. You can create an iCloud account on a Mac or an iOS device and then you should be able to sign into it in the iCloud Control Panel in Windows.

  • MacBook Air (mid-2011) updated to EFI 2.9.1 - now password/trackpad doesn't work properly when trying to log in from sleep.

    Hi, hopefully someone can help me with an issue I've had with my mid-2011 MacBook air.
    It was running fine until I installed the 2.9.1 EFI update from the app store; I believe this fixes problems caused with the 2.9 update however since installing it I've now got a problem when trying to log in. This is what happens:
    I close the lid or put it to sleep.
    I open the lid and the login screen appears.
    The trackpad is non-responsive and I am unable to enter my password as the keyboard is unresponsive.
    I then set the machine to sleep, wait a few minutes and wake it up again - still unresponsive.
    The only thing that works is to hold the power key down to shut it down and start it up afresh. This time I am able to move the cursor and enter my password.
    Its was perfectly fine prior to the 2.9.1 update (and I've not installed anything else in the meantime) but since the 2.9.1 update the above login problem has happened.
    This is my Macbook Air's system (10.9.4) info if its of any help to anyone:
         Model Name:    MacBook Air
         Model Identifier:    MacBookAir4,1
         Processor Name:    Intel Core i5
         Processor Speed:    1.6 GHz
         Number of Processors:    1
         Total Number of Cores:    2
         L2 Cache (per Core):    256 KB
         L3 Cache:    3 MB
         Memory:    4 GB
         Boot ROM Version:    MBA41.0077.B11
         SMC Version (system):    1.74f4
    Anyone else had similar problems?

    Hi Roj,
    Since the update, I have a different problem (when the laptop is in sleeping mode,  screen turned down, fan runs after a certain...)... Did not have time to contact support yet.
    One member suggested me to visit: https://getsupport.apple.com/GetproductgroupList.action.
    Hope it can help...
    Luke

  • HT5622 When trying to log on to I-Cloud with my Apple Id, I keep getting the message that this is a valid Apple Id but not an I-cloud account???How do I link my I-Tunes Apple Id with I-Cloud?

    When trying to log on to I-Cloud with my Apple Id, I keep getting the message that this is a valid Apple Id but not an I-cloud account???How do I link my I-Tunes Apple Id with I-Cloud?

    You are logging in iCloud for the first time. In this case, first you need to log in iCloud on an iPhone, iPad, iPod touch or Mac. See > http://www.apple.com/icloud/setup
    If you have not got a device to set iCloud up, you cannot use it. You can only use iCloud on your PC if you have got an Apple device

  • HT204408 When trying to log into face time I get the registering device does not have appropriate credentials, I have OSX 10.8.4 on my Mac Pro. I can log in using my IPAD

    When trying to log into face time I get the registering device does not have appropriate credentials after I sign in, I have OSX 10.8.4 on my Mac Pro. I can log into face time without a problem using my IPAD.>

    Please take each of the following steps that you haven't already tried, until the issue is reolved. If there's no resolution after Step 3, post your results.
    Step 1
    Sign out of iMessage in the Accounts tab of the preferences dialog, then sign back in.
    Step 2
    Log out of your user account and log back in.
    Step 3
    Boot in safe mode and test, then reboot as usual and test again.
    Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.

  • Getting an error message when trying to log on to imessage

    Getting an error message when trying to log on to imessage... how do I fix this

    Whart does the message say?
    Maybe:
    iOS: Troubleshooting FaceTime and iMessage activation
    iOS: Troubleshooting Messages

  • Error codes 43401, 13999 and 25400 when trying to log in on mobile app

    I keep getting these error codes when trying to log in through my mobile app. 43401, 13999 and 25400. The user name and password are correct. I have deleted / uninstalled the app . Restarted the phone. Nothing seems to work.

    Hi suzyrhodes64 - 
    I pulled up your account & see that a ticket was opened.  A tech should reach out to you shortly.
    I also am looking into the source of your errors as well.  I believe you are using the correct username when logging in, but can you please try resetting your password: https://login.comcast.net/forgotpwd/reset?execution=e1s1
    Thanks,
    Rachel

  • I once created an account and changed meanwhile my Apple ID. Now, when trying to log in to iCloud, I get the message: "You are already logged in". I cannot get access to the account in the way, that, for example, the options appear on the right hand side.

    I once created an account and changed meanwhile my Apple ID. Now, when trying to log in to iCloud, I get the message: "You are already logged in". I cannot get access to the account in the way, that, for example, the options appear on the right hand side.
    What can I do?

    Thank you, pvonk, but:
    To be more precise: I am talking about the logging-in within the System Preferences on my iMac.
    When trying to log in with the old ID, I get no access, i.e. it says "Try again"...-Trying the same with the new one gives me the result I mentioned in my first question...
    Now I found out how to do it: I had to erase all accounts-then I could sign in with my Apple-ID. Thanks again.

  • When trying to log into my bank account, I always get a Challenge Page even though I check the box to register my computer as a private computer.

    When trying to log into my bank accounts (2), I always get a security Challenge Page even though I have repeatedly checked the box to register my computer as a private computer. When I attempt to get into these same two accounts using Internet Explorer, I skip the Challenge Page and go directly to the Log In page. What settings do I need to change in Firefox so that I don't get the Challenge Page every time?

    I have had exactly this problem - Firefox - version 11, but when I updated all my plug-ins (go to Customize Firefox - about halfway down - '''''Check your plugins''''') and restarted Firefox the problem vanished. Hope this helps as this seems to be a fairly large issue.

Maybe you are looking for