FCP audio on/off toggle

I am brand new to this software and am under pressure to edit a sequence. Sound works on my computer, I see the meters working with my sequence, I cannot hear it. WHERE is the audio on/off option? I have been searching for more than an hour. PLEASE help. Final Cut Pro

There are several places to look. The above post is a good start. If that doesn't help, look in your audio/video settings in the Final Cut Pro menu and make sure your audio output is set to built in audio if you are using the computer speakers. If you are using a different source to view your footage, make sure you choose that source for the audio output.
Another question... are you getting audio from other apps, like iTunes? If not, your audio output in the System Preferences might not be set to Built In audio either. (I actually find, as the above post states, that I bumped the mute button accidentally...but...)
Matt

Similar Messages

Output: Audio is off synch

Little problem... dont know why! It just started all of a sudden.
I have my Frame Offset (in System Settings) set to 7. This is the only way to have my canvas match my external monitor with external audio. I was able to output the video (no matter how long) and the video in my monitor, external monitor, VTR monitor all synched-up perfectly.
But since yesterday, whenever I output something longer than a few minutes the audio will begin to trail off. After a few minutes, the audio is off-synch even though in the beginning it is synching fine.
Today I had to thrash my settings and set my Frame Offset to 0 in order to output a 10 minute video. But in order to continue editing, I have to go back and set it again to 7.
Did I touch a setting somewhere that might have upset FCP? Thanks for your help guys!
System:
FCP HD (4.5)
AJA IO
G5

Little problem... dont know why! It just started all of a sudden.
I have my Frame Offset (in System Settings) set to 7. This is the only way to have my canvas match my external monitor with external audio. I was able to output the video (no matter how long) and the video in my monitor, external monitor, VTR monitor all synched-up perfectly.
But since yesterday, whenever I output something longer than a few minutes the audio will begin to trail off. After a few minutes, the audio is off-synch even though in the beginning it is synching fine.
Today I had to thrash my settings and set my Frame Offset to 0 in order to output a 10 minute video. But in order to continue editing, I have to go back and set it again to 7.
Did I touch a setting somewhere that might have upset FCP? Thanks for your help guys!
System:
FCP HD (4.5)
AJA IO
G5

HT201335 I checked the apple tv on my iPad and iPhone but no mirroring on/off toggle appeard. How do I make this work?

I checked the apple tv on my iPad and iPhone but no mirroring on/off toggle appeard. How do I make this work?
I am trying to get mirroring to work

Try:
http://www.macworld.com/article/2099925/how-to-stream-ios-audio-to-multiple-airp lay-destinations.html

4G on/off toggle needed for AT&T iPhone 4S

I appreciate that Apple added a feature in iOS 5.1 that actually displays the true HSPA+ ("4G") signal strength on my iPhone 4S. I no longer see 5 bars of 3G while mysteriously getting no data - now I can see that I'm stuck on the HSPA+ network with 0 bars. Thanks for confiming what I already knew - that AT&T's HSPA+ coverage is terrible nationwide, but completely nil in downtown Chicago. The new feature improves nothing, but I appreciate the transparency.
If Apple really wants to help us beleaguered 4S users, not to mention sell more upgrades to our AT&T-using friends that we have warned not to buy the 4S, a 4G on/off toggle needs to be added to let us get back on the 3G network when necessary. It's the only solution until AT&T adds more HSPA+ capacity. And it's a simple one.
If you could give the 3G on/off toggle back to prior-gen iPhone users in 5.1, you can do this for us.
(I've also posted a request on the AT&T boards and I strongly encourage others in the same situation to hound the crap out of both until they fix this problem. We've all paid way too much money to be saddled with bricks.)

http://www.apple.com/feedback/iphone.html
Regards.

HT1657 Help to get audio books off iphone 4s

I tried the following, but after deleting the covers the books are still on my phone-, PLEASE, how do i get these audio books off my phone????? PLEASE be specific! I'm going crazy PLEASE help-
Jan 23, 2012 9:27 PM
After much trial and error, I have finally unlocked the mystery of how to remove Audiobook files from the iphone without changing the file name or type. Here are the steps:
1. Plug in your iPhone to your computer
2. Launch iTunes
3. Click on the left-hand menu option that says "books"
4. All the audiobooks (such as iTunes or Audible) will be here with cover art for each one. If you right click on these titles, you will have the option to "Uncheck Selection" or "Check Selection" depending on whether or not it is on your iPhone.
5. If you want to remove an audiobook from your iPhone, simply right click and select "Uncheck Selection"
6. Sync your iPhone
7. If you are still having problems, you have probably changed your sync options for music. Change them so that you are only syncing selected items(there are 2 different places to control these options, the "Summary" tab(which should have the "Option" "select songs and videos..." checkbox checked) and the "Music" tab(which should have the "selected playlists, artists,..." checkbox checked).
8. Magically those pesky audio books that you know and love are no longer on your iphone
9. Write Apple a nasty email and ask why $10 million in audiobook revenue hasn't warranted a software change to make this easier to understand and do.

I don't know how many contacts you have, but if it is a reasonable # maybe you can enter all of them into icloud and have them sync to your device going forward.

Is there a way to CAPTURE audio/video off the net then run it m.m. prsntn

I'm fairly new to the mac genre. In windows we had apps like Camtasia to
capture audio/video off the net. I was hoping something like that would
be avail for the mac and then once capture it how would I edit it and
include it in a presentation software; for example, keynote?
Is there added hardware req'd (?Capture board)? what would be a good software mac
compatible?

I'd like to capture audio and video for example sometimes just need to capture the
audio if some instruction is coming say over a quicktime or media player for my work.
Then sometimes I need to capture the audio and video when they ware actually showing me
charts and explaining them things like that.
is snap Z the way to go then for quality and fair pricing to get good results.
Do we have any resident applications already on the ilife variety that could be utilized for
something like this or is the only way to go through a 3rd party vendor?

Audio cuts off during fade to black transition

After completing my movie, I tried to add a simple fade in at the very beginning and a fade out at the end. The video image fades fine but the audio is off altogether during both transitions.
What's weird is that if I look at the audio track in the precision editor, it looks like it fades in and out perfectly with the video.
Please help!
Thanks,
Jeremy

Any takers? I'd be very keen to learn how to do this as well.
I have a "fade to black" at the end of my movie but I don't want the audio to fade until the end of the clip.

Audio on/off button is not coming in safari on iPad(iOS6)

Hi,
We have published some content using Captivate 7. We are facing a problem where audio on/off button is not being shown in safari on iPad(iOS6) while this is working fine on desktop browsers.
Thanks
-Manish

There is no reset button. To reset, hold down both the power and home buttons for perhaps 15 seconds and the iDevice will turn itself off.
But the problem you report (a blank lit screen shows for a second then disappears) is what you would get if the battery wasn't charged up. Try plugging it in for a few hours, then turning it on normally.

Intermittent Audio Drop-offs with Airtunes to Apple TV

A number of other threads have similar problems. iMac 2.8 GHz iTunes 8.1 is connect to an updated ATV via new dual-channel ABS on the "n" band. Still there are audio drop offs with AirTunes as it did with the previous ABS Extreme n and previous version of iTunes. So much so, I just gave up and used the Apple Remote on the iPhone to play ATV. Any suggestions would be appreciated.

Switching from WEP to WPA/WPA2 personal seems to have totally cured the dropouts for me.
Also I used an old flying saucer Airport as the receiver via ethernet out for my entreatment center instead of using the AppleTV's wireless.
Also I had a Panasonic security cam that didn't support WPA so I used another flying saucer Airport via ethernet out as its receiver.
So now my setup is,
Airport Extreme in my home office as my main base station with a Motorola ADSL 2200 router feeding it internet.
Flying saucer Airport via ethernet and a hub feeding my AppleTV, DirecTV DVR, and a Mac mini.
Another flying saucer Airport via ethernet feeding my Panasonic security cam.
Airport Express for my bedroom speakers.
All airports are in bridge mode with the Motorola 2200 DSL modem acting as my router. (this seems to be the only way my Vonage adapter recovers without having to be reset if my DSL goes down)
I steam music from my 17" Macbook Pro to the AppleTV and Bedroom speakers all day now without any dropouts.

TS2289 Ever since the new update in iMovie all my audio seems to be there ,but when I get in the middle of the video the audio is off. Help?

Ever since the new update in iMovie all my audio seems to be there ,but when I get in the middle of the video the audio is off. Help?

I think the problem is that the iPod got set to Manually manage music and videos. It needs to be set up for automatic syncing again. Just unchecking that Manually manage music and videos setting does not do it.
In iTunes 12, select the iPod in iTunes (using the device button), so that you see the iPod's "management" screen. In the sidebar (along left side of screen), there are two headings (Settings and On My Device). Under Settings, click on Music. To the right, you see the iPod's Music screen, where you tell iTunes how to sync songs to the iPod.
Check the box at the top for Sync Music. That turns ON automatic syncing for music. Below that, choose the option to sync Entire music library (assuming your music library fits completely on your iPod). Otherwise, you can choose the option to sync Selected playlists, artists, albums, and genres and make your selections below. Then click Apply.

Capturing footage and audio is off sync?

I'm capturing footage and then play it back on the timeline. I notice that the audio is off sync, why is that? I use Sony DVCAM Deck to capture without altering the setting, in Final Cut Pro 6, and the audio became off sync. Any solution?
Thank you
Luis

Is it consistently off-sync? Like is it always 2 frames off? Or does it trail off, like it starts in sync and then it drifts out of sync after several seconds? I recently captured a bunch of stuff that was recorded with a DVX100 and the audio was 2 frames ahead of the video (sometimes it seemed like it was only 1 frame off, but 99% of the time it was 2).
Then another problem that crept up was when it got to the end of a tape, which would confuse Final Cut. It would stop, and then make the last clip captured play at 29.97 when it should have been 23.98, though the audio would play back normally. So it would appear to be in sync for a moment and then it would get way out of sync very quickly. What I had to do then was just babysit the capture of the last scene on the tape and stop it before it got to the end.

Capturing VHS through DV cam to FCP - Audio clipping!!

Hey all,
I'm capturing a VHS through my DV cam (it has analogue to digital version) and when it comes into FCP the audio is clipping (going above 0db)
Is there anyway to lower the input volume?
Thankyou
Paul

The camera doesn't let you change the input volume
What I did was:
Made the VIDEO ONLY go from VCR > DV CAM > MAC
But made the audio go to VCR > PC LINE IN > PC LINE OUT > DV CAM > MAC
When the audio came through my PC - I lowered the LINE IN volume so on the FCP audio level meters the audio peaked at -6dbs.
Not a bad idea hey
Lucky I had all the cables and connectors laying around.

Audio synch off when exporting to HDTV 720p 29.97 high quality

we are exporting 720p native footage to the MPEG2 -> HDTV 720p 29.97 High Quality preset... the audio is off by six or so frames on export, which is noticable on talking heads. find out if anyone has found a fix for this in CS5?
Windows 7 12 gigs ram exporting using raid 3 config

You need to provide full DETAILS of what you are doing, from input files onward
Such as...
Work through all of the steps (ideas) listed at http://forums.adobe.com/thread/459220?tstart=0
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used and your project and output settings

Video playback audio cuts off after few second

Pictures are fine but audio cuts off sometime around 5-10 seconds for the entire duration of the video unless you skip the video further a few seconds where the sound cuts off,audio are back but only for maybe 1 or 2 minutes then if you repeat the same step audio are back but again for only a few minutes,only occurs when not using headphones,but when I am using headphones video and the audio plays fine for the entire duration of the video.It annoys me as I don't usually use earphone.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all videos and resync/redownload
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

When burning iso with disk utility, the audio is off!

I have an ISO file that works fine when I mount it or watch it on VLC. If I burn it using windows (in parallels) it is fine...
But when I burn it with disk utility, the audio is off by a second or so. I can't figure this out since it is a disk image. there shouldn't be a way to dissociate the audio. I did have a previous version of the iso file that was off.. Is it possible that I am trying to burn an iso file and it is burning a mounted version from before (even though I am choosing this from the finder?)
Any thoughts or suggestions?
I though macs just work. Seems a bit more complicated.

I don't recall for sure about "disk utility" and DVD and/or Bluray. It seems to me that Toast is usually used.

FCP audio on/off toggle

Similar Messages

Maybe you are looking for