FCP behaves funky when SOUND SOAP is applied

I'm wondering if anyone else has run into this situation....
When I go to apply my SOUND SOAP filter to an audio clip in my timeline, FCP slowly begins to show strange behavior. This is what happens:
1). I can no longer access features using keyboard shortcuts
2). Eventually I am no longer able to access drop down menus from the top bar (File, Sequence, Effects, Modify, etc)
3). Pretty soon I am no longer able to even save my work and very soon after that, my computer freezes up all together and even a FORCE QUIT doesn't work. I end up having to shut off the computer cold, unplugging it for a few minutes and then plugging it back in.
From there the FCP software and computer work fine.
When I don't apply a sound soap filter, things run fine. When working in another project (that doesn't have audio clips with Sound Soap on them), things work fine. It's just when I work with projects containing sound soap clips that things start to get weird.
Has anyone else had this problem with Sound Soap 2? Technically I could have posted this question under the USING YOUR MACPRO thread but since it was affecting FCP, I thought it was relevant here.
I have a MacPro 2x2.8 GHz Quad-core Intel Xeon with 4GB 800 MHz DDR2 FB-DIMM and I'm running FCS2 version 6.0.5 under MacOS X (10.5.7)

That's a good point but what I'm trying to do is remove unwanted background noise from a clip. Sound Soap 2 does 90% of this in a single click and that's why I use it. Does Soundtrack Pro have a similar feature? I don't dabble too much in that program (for audio repair).
I'm trying to remove the constant sound of an air conditioning unit that's running in the background. I've used Sound Soap 2's "Learn Noise" feature many times in the past for removing such "constant" background noises and then if there is any residual noise left over, I'll apply a simple "3 band graphic eq" filter from the FCP audio filters selection to lower the high end gain and frequency.
The problem is...
Sound Soap seems to be tripping up this particular computer.
Anyway, just thought I'd throw it out there on the chance someone else had the same issue.
Thanks for the suggestion!

Similar Messages

Computer Freezes using Sound Soap 2

* I have previously posted this question on the Final Cut Pro discussion forum but also wanted to post it here since my entire computer seems to freeze up when I apply this app. (not just Final Cut Pro). So here goes...
I'm wondering if anyone else has run into this situation....
When I go to apply my SOUND SOAP filter to an audio clip in my timeline, FCP slowly begins to show strange behavior. This is what happens:
1). I can no longer access features using keyboard shortcuts
2). Eventually I am no longer able to access drop down menus from the top bar (File, Sequence, Effects, Modify, etc)
3). Pretty soon I am no longer able to even save my work and very soon after that, my computer freezes up all together and even a FORCE QUIT doesn't work. I end up having to shut off the computer cold, unplugging it for a few minutes and then plugging it back in.
From there the FCP software and computer work fine.
When I don't apply a sound soap filter, things run fine. When working in another project (that doesn't have audio clips with Sound Soap on them), things work fine. It's just when I work with projects containing sound soap clips that things start to get weird.
Has anyone else had this problem with Sound Soap 2? Technically I could have posted this question under the USING YOUR MACPRO thread but since it was affecting FCP, I thought it was relevant here.
I have a MacPro 2x2.8 GHz Quad-core Intel Xeon with 4GB 800 MHz DDR2 FB-DIMM and I'm running FCS2 version 6.0.5 under MacOS X (10.5.7)

Same here. I called Apple phone support today and they confirmed it is a known issue that is being worked on. No possibility to get an update on when this issue is resolved.
Just out of curiosity, apparantly this is not an issue for everyone otherwise there would be more views and replies in this forum. So what could we have in common:
* I upgraded from Leopard.
* Did you install any additional media players? I installed vlc, mythtv frontend and Quicktime 7 legacy support from the optional software on the snow leopard install CD.
* Do you have a recent model (i bought my Mac Book Pro 2 weeks ago)
Best regards,
Dirk-Jan

STP vs. Sound Soap?

Has anyone compared the sound reduction capabilities of STP vs. Sound Soap from Bias? And in a situation where STP's Set Noise Print / Reduce Noise function doesn't help make the voice all that much clearer, would Sound Soap possibly be better equipped to keep the baby while throwing out the bath water?
I'm currently needing to transcribe a 17-minute speech heard over a ballroom PA system, and recorded as an experiemnt on a tiny digital pocket memo recorder using its built in mic (the kind of thing where you'd normally hold it close to your mouth and go "memo to self...").
Needless to say, there's a LOT of hiss, and it appears to be across the full frequency spectrum. You can understand the speaker when he puts some oomph in his delivery, but when he goes a bit soft it's often a struggle to make out the exact words he's saying. Have tried STP's noise reduction feature (in various degrees), but am finding that the more noise I remove, the more "warped" the voice becomes, and as for intelligibility (which is all I'm trying for) it's pretty much a wash (pardon the pun).
So should I shell out for Sound Soap and give it a try, or am I likely to hear that much of a difference?
John Bertram
Toronto
G5 dual 1.8 Mac OS X (10.4.3)

We use both SoundSoap and STP. STP seems to work best with consistent low level 'airy" type background noise. It tends to chirp badly as you apply higher levels of effect. One suggestion we have used is to keep the level of noise reduction minimal but make several passes to target as narrow a frequency range as possible. On the type of noise you are describing we have had some limited success using STP.
We also use SoundSoap for more broadband type noise. It works remarkably well and is efficient. It also will chirp badly when you apply too much effect. It unfortunatly doesn't work too well when applied in successive passes. Like STP it has an "enhanced" slider to adjust for frequency loss and seems to work reasonably well.
For me it is nearly a toss up when it comes to the two apps performance. As the earlier writer said, if the noise is in the same frequency range as the recorded voice you will lose some of the vocal and even the best noise reduction software won't prevent that. You are likely going to have to settle for some noise in the background.
One last suggestion is to use the graphic equalizer in FCP to target the specific region of voice you want to hear. You can use this EQ to knock out the very high frequencies and most pervasive rumbles and boost the vocal frequencies that are closest to your speakers natural range. Careful not to over do it because it will cause the voice to digitally quantize and sound awful if you apply too much gain to the frequencies. Try this on a small clip and save it out as an aiff before running the noise reduction in STP on the clip. This will accentuate the noise but give you a stronger signal for the noise reduction to work on. I have used this technique to lift a female voice from a room with an air conditioner droning in the background with fairly decent results.

Bc4j not behaving correctly when details are repeatedly added/removed

Hi,
     I'm having problems creating a form with a master detail relationship. Seems like bc4j is not behaving correctly when details with the same keys are repeatedly added and removed.
     I've 3 entities maintenance order, maintenance and maintenance type with the relationships maintenance order 1:n maintenance n:1 maintenance type. My application module data model has one view for each of these entities and a view link between maintenance order and maintenance.
     In the maintenance order form, I can choose which maintenance types apply to a maintenance order by marking checkboxes. The struts action that saves the maintenance order, I remove/add maintenance records base on the selected/unselected checkboxes.
Sequence of events:
1) Open maintenance order - Maintenance order shown with all maintenances selected
2) Uncheck all maintenances and save order - all maintenances removed from db
3) Open maintenance order - Maintenance order shown with no maintenances selected as expected
4) Check all maintenances and save order - all maintenances saved to db
5) Open maintenance order - Maintenance order shown with all maintenances selected as expected
6) Uncheck all maintenances and save order - NO maintenances removed from db
7) Open maintenance order - Maintenance order shown with NO maintenances selected, even thought there are maintenances in the db
8) Check all maintenances and save order - bc4j tried to insert new maintenance records in the db and an exception was raised due to unique constraint violation
My environment is: Sun JDK 1.4.1_01, JDeveloper 9.0.3.4 (build 1247), testing with the embedded server
Server log produced with jbo.debugoutput=console:
[17] BC4J Property jbo.default.language='pt' -->(MetaObjectManager) from System Default
[18] BC4J Property jbo.default.country='BR' -->(MetaObjectManager) from System Default
[19] BC4J Property DeployPlatform='LOCAL' -->(SessionImpl) from Client Environment
[20] Skipping empty Property ConnectionMode from System Default
[21] Skipping empty Property HostName from System Default
[22] Skipping empty Property ConnectionPort from System Default
[23] BC4J Property jbo.locking.mode='pessimistic' -->(MetaObjectManager) from System Default
[24] Skipping empty Property ApplicationPath from System Default
[25] BC4J Property AppModuleJndiName='br.com.cvrd.logistica.kitbordo.sinalizacao.model.service.CadastroDeManutencaoModule' -->(SessionImpl) from Client Environment
[26] Skipping empty Property java.naming.security.principal from System Default
[27] Skipping empty Property java.naming.security.credentials from System Default
[28] Skipping empty Property jbo.user.principal from System Default
[29] Skipping empty Property jbo.object.marshaller from System Default
[30] BC4J Property jbo.use.pers.coll='false' -->(SessionImpl) from System Default
[31] BC4J Property jbo.pers.max.rows.per.node='70' -->(SessionImpl) from System Default
[32] BC4J Property jbo.pers.max.active.nodes='30' -->(SessionImpl) from System Default
[33] Skipping empty Property jbo.pcoll.mgr from System Default
[34] BC4J Property jbo.txn_table_name='PS_TXN' -->(SessionImpl) from System Default
[35] BC4J Property jbo.txn_seq_name='PS_TXN_seq' -->(SessionImpl) from System Default
[36] BC4J Property jbo.control_table_name='PCOLL_CONTROL' -->(MetaObjectManager) from System Default
[37] BC4J Property jbo.stringmanager.factory.class='use_default' -->(SessionImpl) from System Default
[38] BC4J Property jbo.fetch.mode='AS.NEEDED' -->(MetaObjectManager) from System Default
[39] BC4J Property jbo.323.compatible='false' -->(MetaObjectManager) from System Default
[40] Skipping empty Property JBODynamicObjectsPackage from System Default
[41] BC4J Property MetaObjectContextFactory='oracle.jbo.mom.xml.DefaultMomContextFactory' -->(MetaObjectManager) from System Default
[42] BC4J Property jbo.load.components.lazily='false' -->(MetaObjectManager) from System Default
[43] BC4J Property MetaObjectContext='oracle.jbo.mom.xml.XMLContextImpl' -->(MetaObjectManager) from System Default
[44] BC4J Property java.naming.factory.initial='oracle.jbo.common.JboInitialContextFactory' -->(SessionImpl) from Client Environment
[45] BC4J Property IsLazyLoadingTrue='true' -->(MetaObjectManager) from /oracle/jbo/server/jboserver.properties resource
[46] BC4J Property ActivateSharedDataHandle='false' -->(MetaObjectManager) from System Default
[47] Skipping empty Property HandleName from System Default
[48] Skipping empty Property Factory-Substitution-List from System Default
[49] BC4J Property jbo.project='Sinalizacao' -->(Configuration) from Client Environment
[50] BC4J Property jbo.max.cursors='50' -->(MetaObjectManager) from System Default
[51] BC4J Property jbo.dofailover='true' -->(Configuration) from System Default
[52] BC4J Property jbo.doconnectionpooling='false' -->(Configuration) from System Default
[53] BC4J Property jbo.recyclethreshold='10' -->(Configuration) from System Default
[54] BC4J Property jbo.ampool.dynamicjdbccredentials='true' -->(Configuration) from System Default
[55] BC4J Property jbo.ampool.resetnontransactionalstate='true' -->(SessionImpl) from System Default
[56] BC4J Property jbo.ampool.sessioncookiefactoryclass='oracle.jbo.http.HttpSessionCookieFactory' -->(Configuration) from Client Environment
[57] BC4J Property jbo.ampool.connectionstrategyclass='oracle.jbo.common.ampool.DefaultConnectionStrategy' -->(Configuration) from System Default
[58] BC4J Property jbo.ampool.maxpoolsize='2147483647' -->(Configuration) from System Default
[59] BC4J Property jbo.ampool.initpoolsize='0' -->(Configuration) from System Default
[60] BC4J Property jbo.ampool.monitorsleepinterval='600000' -->(Configuration) from System Default
[61] BC4J Property jbo.ampool.minavailablesize='5' -->(Configuration) from System Default
[62] BC4J Property jbo.ampool.maxavailablesize='25' -->(Configuration) from System Default
[63] BC4J Property jbo.ampool.maxinactiveage='600000' -->(Configuration) from System Default
[64] BC4J Property jbo.ampool.doampooling='true' -->(Configuration) from System Default
[65] BC4J Property jbo.passivationstore='null' -->(MetaObjectManager) from System Default
[66] BC4J Property jbo.saveforlater='false' -->(SessionImpl) from System Default
[67] BC4J Property jbo.snapshotstore.undo='persistent' -->(SessionImpl) from System Default
[68] BC4J Property jbo.maxpassivationstacksize='10' -->(SessionImpl) from System Default
[69] BC4J Property jbo.txn.handleafterpostexc='false' -->(SessionImpl) from System Default
[70] BC4J Property jbo.maxpoolcookieage='-1' -->(Configuration) from System Default
[71] BC4J Property PoolClassName='oracle.jbo.common.ampool.ApplicationPoolImpl' -->(Configuration) from System Default
[72] BC4J Property jbo.maxpoolsize='2147483647' -->(Configuration) from System Default
[73] BC4J Property jbo.initpoolsize='0' -->(Configuration) from System Default
[74] BC4J Property jbo.poolrequesttimeout='30000' -->(Configuration) from System Default
[75] BC4J Property jbo.poolmonitorsleepinterval='600000' -->(Configuration) from System Default
[76] BC4J Property jbo.poolminavailablesize='5' -->(Configuration) from System Default
[77] BC4J Property jbo.poolmaxavailablesize='25' -->(Configuration) from System Default
[78] BC4J Property jbo.poolmaxinactiveage='600000' -->(Configuration) from System Default
[79] BC4J Property RELEASE_MODE='Stateful' -->(MetaObjectManager) from System Default
[80] BC4J Property jbo.assoc.consistent='true' -->(MetaObjectManager) from System Default
[81] BC4J Property jbo.viewlink.consistent='false' -->(MetaObjectManager) from /oracle/jbo/server/jboserver.properties resource
[82] BC4J Property jbo.passivation.TrackInsert='true' -->(MetaObjectManager) from System Default
[83] Skipping empty Property jbo.ViewCriteriaAdapter from System Default
[84] BC4J Property jbo.SQLBuilder='Oracle' -->(MetaObjectManager) from /oracle/jbo/server/jboserver.properties resource
[85] BC4J Property jbo.ConnectionPoolManager='oracle.jbo.server.ConnectionPoolManagerImpl' -->(MetaObjectManager) from System Default
[86] BC4J Property jbo.TypeMapEntries='Oracle' -->(MetaObjectManager) from /oracle/jbo/server/jboserver.properties resource
[87] Skipping empty Property jbo.sql92.JdbcDriverClass from System Default
[88] BC4J Property jbo.sql92.LockTrailer='FOR UPDATE' -->(MetaObjectManager) from System Default
[89] BC4J Property jbo.jdbc.trace='false' -->(MetaObjectManager) from System Default
[90] BC4J Property jbo.sql92.DbTimeQuery='select sysdate from dual' -->(MetaObjectManager) from System Default
[91] BC4J Property oracle.jbo.defineColumnLength='as_chars' -->(MetaObjectManager) from System Default
[92] Skipping empty Property jbo.tmpdir from System Default
[93] Skipping empty Property jbo.server.internal_connection from System Default
[94] Skipping empty Property SessionClass from System Default
[95] Skipping empty Property TransactionFactory from System Default
[96] BC4J Property jbo.debugoutput='console' -->(Diagnostic) from System Property
[97] BC4J Property jbo.debug.prefix='DBG: ' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
[98] BC4J Property jbo.logging.show.timing='false' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
[99] BC4J Property jbo.logging.show.function='false' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
[100] BC4J Property jbo.logging.show.level='false' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
[101] BC4J Property jbo.logging.show.linecount='true' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
[102] BC4J Property jbo.logging.trace.threshold='6' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
[103] BC4J Property jbo.jdbc.driver.verbose='false' -->(Diagnostic) from System Default
[104] Skipping empty Property oracle.home from System Default
[105] Skipping empty Property oc4j.name from System Default
[106] BC4J Property jbo.ejb.txntimeout='1830' -->(SessionImpl) from System Default
[107] BC4J Property jbo.ejb.txntype='global' -->(SessionImpl) from System Default
[108] BC4J Property jbo.ejb.txn.disconnect_on_completion='false' -->(SessionImpl) from System Default
[109] Skipping empty Property oracle.jbo.schema from System Default
[110] BC4J Property jbo.xml.validation='false' -->(MetaObjectManager) from System Default
[111] BC4J Property ord.RetrievePath='ordDeliverMedia' -->(MetaObjectManager) from System Default
[112] BC4J Property ord.HttpMaxMemory='102400' -->(MetaObjectManager) from System Default
[113] Skipping empty Property ord.HttpTempDir from System Default
[114] BC4J Property ord.wmp.classid='clsid:22D6F312-B0F6-11D0-94AB-0080C74C7E95' -->(MetaObjectManager) from System Default
[115] BC4J Property ord.qp.classid='clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B' -->(MetaObjectManager) from System Default
[116] BC4J Property ord.rp.classid='clsid:CFCDAA03-8BE4-11cf-B84B-0020AFBBCCFA' -->(MetaObjectManager) from System Default
[117] BC4J Property ord.wmp.codebase='http://activex.microsoft.com/activex/controls/mplayer/en/nsmp2inf.cab#Version=5,1,52,701' -->(MetaObjectManager) from System Default
[118] BC4J Property ord.qp.codebase='http://www.apple.com/qtactivex/qtplugin.cab' -->(MetaObjectManager) from System Default
[119] Skipping empty Property ord.rp.codebase from System Default
[120] BC4J Property ord.wmp.plugins.page='http://www.microsoft.com/isapi/redir.dll?prd=windows&sbp=mediaplayer&ar=Media&sba=Plugin&' -->(MetaObjectManager) from System Default
[121] BC4J Property ord.qp.plugins.page='http://www.apple.com/quicktime/download/' -->(MetaObjectManager) from System Default
[122] BC4J Property ord.rp.plugins.page='http://www.real.com/player/' -->(MetaObjectManager) from System Default
[123] BC4J Property jbo.security.enforce='None' -->(SessionImpl) from System Default
[124] BC4J Property jbo.security.loginmodule='oracle.security.jazn.tools.Admintool' -->(SessionImpl) from System Default
[125] BC4J Property jbo.server.useNullDbTransaction='false' -->(SessionImpl) from System Default
[126] Copying unknown Client property (DBconnection='jdbc:oracle:thin:@cdsvandromeda:1521:dctm') to session
[127] Copying unknown Client property (password='kitbordo') to session
[128] Copying unknown Client property (JDBCName='Kitbordo') to session
[129] Copying unknown Client property (jbo.jndi.use_default_context='true') to session
[130] Copying unknown Client property (user='kitbordo') to session
[131] Copying unknown Client property (jbo.applicationmoduleclassname='br.com.cvrd.logistica.kitbordo.sinalizacao.model.service.CadastroDeManutencaoModule') to session
[132] Copying unknown Client property (ApplicationName='br.com.cvrd.logistica.kitbordo.sinalizacao.model.service.CadastroDeManutencaoModule') to session
[133] WARNING: Unused property: LC='Calling Function' found in /oracle/jbo/common/Diagnostic.properties resource
[134] }} finished loading BC4J properties
[135] -----------------------------------------------------------
Diagnostics: (Properties (re)loaded) Routing diagnostics to standard output (use -Djbo.debugoutput=silent to remove)
[136] Diagnostic Properties: Timing:false Functions:false Linecount:true Threshold:6
[137] JavaVMVersion: 1.4.1_01-b01
[138] JavaVMVendor: Sun Microsystems Inc.
[139] JavaVMName: Java HotSpot(TM) Client VM
[140] OperatingSystemName: Windows 2000
[141] OperatingSystemVersion: 5.0
[142] OperatingSystemUsername: Lbueno
[143] Jbo323Compatible Flag: false, str: false
[144] Loading from Sinalizacao.jpx file
[145] Loading from indvidual XML files
[146] Loading the Containees for the Package 'Sinalizacao.Sinalizacao'.
[147] Connected to Oracle JBO Server - Version: 9.0.3.11.88
[148] BC4J: Instrumentation disabled
[149] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/service/service.xml file
[150] Loading from indvidual XML files
[151] Loading the Containees for the Package 'br.com.cvrd.logistica.kitbordo.sinalizacao.model.service.service'.
[152] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/service/CadastroDeManutencaoModule.xml file
[153] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/view/view.xml file
[154] Loading from indvidual XML files
[155] Loading the Containees for the Package 'br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.view'.
[156] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/view/TipoManutencaoBoiaView.xml file
[157] ViewObjectImpl's default fetch mode = 0
[158] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/entity/entity.xml file
[159] Loading from indvidual XML files
[160] Loading the Containees for the Package 'br.com.cvrd.logistica.kitbordo.sinalizacao.model.entity.entity'.
[161] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/entity/TipoManutencaoBoiaEntity.xml file
[162] Loading Typemap entries from oracle.jbo.common.OracleTypeMapEntries
[163] Stringmanager using default locale: 'pt_BR'
[164] CSMessageBundle (language base) being initialized
[165] OracleSQLBuilder reached getInterface
[166] Oracle SQL Builder Version 3.2.0.0.0
[167] ViewRowSetImpl's jbo.viewlink.consistent = false (0)
[168] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/view/BoiasPorCanalView.xml file
[169] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/entity/BoiaEntity.xml file
[170] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/view/HistoricoManutencaoBoiaView.xml file
[171] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/entity/HistoricoManutencaoBoiaEntity.xml file
[172] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/view/ManutencaoBoiaView.xml file
[173] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/entity/ManutencaoBoiaEntity.xml file
[174] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/view/ManutencaoBoiaViewLink.xml file
[175] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/entity/ManutencaoBoiaAssociation.xml file
[176] Using DatabaseTransactionFactory implementation oracle.jbo.server.DatabaseTransactionFactory
[177] mUsePersColl is false
[178] ViewObjectImpl.mDefaultMaxRowsPerNode is 70
[179] ViewObjectImpl.mDefaultMaxActiveNodes is 30
[180] DBTransactionImpl Max Cursors is 50
[181] Created root application module: 'br.com.cvrd.logistica.kitbordo.sinalizacao.model.service.CadastroDeManutencaoModule'
[182] Locale is: 'pt_BR'
[183] DefaultConnectionStrategy is establishing an application module connection
[184] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[185] Creating a new pool resource
[186] Trying connection/2: url='jdbc:oracle:thin:@cdsvandromeda:1521:dctm' info='{user=kitbordo, password=kitbordo}' ...
[187] Successfully logged in
[188] JDBCDriverVersion: 9.0.1.4.0
[189] DatabaseProductName: Oracle
[190] DatabaseProductVersion: Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production With the Partitioning, OLAP and Oracle Data Mining options JServer Release 9.2.0.1.0 - Production
[191] **PCollManager.resolveName** tabName=PS_TXN
[192] **retrieve** id=-1, collid=6838, keyonly=falseGetting a connection for internal use...
[193] Creating internal connection...
[194] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[195] Creating a new pool resource
[196] Trying connection/2: url='jdbc:oracle:thin:@cdsvandromeda:1521:dctm' info='{user=kitbordo, password=kitbordo, dll=ocijdbc9, protocol=thin}' ...
[197] , parid=0, ret=oracle.jdbc.driver.OracleBlobInputStream
[198] stmt: select parentId, content from "PS_TXN" where id=:1 and collid=:2
[199] **retrieve** id=1, collid=6838, keyonly=false, parid=-1, ret=oracle.jdbc.driver.OracleBlobInputStream
[200] stmt: select parentId, content from "PS_TXN" where id=:1 and collid=:2
[201] Clearing VO cache for TipoManutencaoBoiaView
[202] Clear QueryCollection in cache...
[203] Clearing VO cache for BoiasPorCanalView
[204] Clear QueryCollection in cache...
[205] Clearing VO cache for HistoricoManutencaoBoiaView
[206] Clear QueryCollection in cache...
[207] Getting a connection for internal use...
[208] Creating internal connection...
[209] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[210] Clearing VO cache for BoiasPorCanalView
[211] Clear QueryCollection in cache...
07/09/2004 12:07:51 org.apache.struts.util.PropertyMessageResources <init>
INFO: Initializing, config='org.apache.struts.actions.LocalStrings', returnNull=true
[212] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/view/HistoricoManutencaoViewLink.xml file
[213] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/entity/HistoricoDeManutencaoDeBoiaAssociation.xml file
[214] Column count: 23
[215] ViewObject : Created new QUERY statement
[216] SELECT Boia.H55SCANA, Boia.H55CODBO, Boia.H55LATGR, Boia.H55LATMI, Boia.H55LATSE, Boia.H55INDLA, Boia.H55VALEX, Boia.H55LONGR, Boia.H55LONMI, Boia.H55LONSE, Boia.H55INDLO, Boia.H55VALEY, Boia.H55CORLP, Boia.H55REMOV, Boia.H55NRORD, Boia.H55PROJE, Boia.H55PINTU, Boia.H55CARAC, Boia.H55EQLUM, Boia.H55FOLUM, Boia.H55EQFUN, Boia.H55EQMON FROM H55BOIAT Boia WHERE Boia.H55SCANA = :1
[217] Binding param 1: 21
[218] Clearing VO cache for TipoManutencaoBoiaView
[219] Clear QueryCollection in cache...
[220] Column count: 2
[221] ViewObject : Created new QUERY statement
[222] SELECT TipoManutencaoBoiaEntity.H5PSTPMB, TipoManutencaoBoiaEntity.H5PNOMAN FROM H5PTPMBT TipoManutencaoBoiaEntity ORDER BY TipoManutencaoBoiaEntity.H5PNOMAN ASC
07/09/2004 12:07:52 org.apache.struts.util.PropertyMessageResources <init>
INFO: Initializing, config='org.apache.struts.taglib.bean.LocalStrings', returnNull=true
07/09/2004 12:07:52 org.apache.struts.util.PropertyMessageResources <init>
INFO: Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
07/09/2004 12:07:52 org.apache.struts.util.PropertyMessageResources <init>
INFO: Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
07/09/2004 12:07:52 org.apache.struts.util.PropertyMessageResources <init>
INFO: Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
07/09/2004 12:07:52 org.apache.struts.util.PropertyMessageResources <init>
INFO: Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
[223] Application Module failover is enabled
[224] Getting a connection for internal use...
[225] Creating internal connection...
[226] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[227] <AM MomVer="0">
<cd/>
<TXN Def="0" New="0" Lok="1"/>
<VO>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.TipoManutencaoBoiaView" Name="TipoManutencaoBoiaView"/>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.BoiasPorCanalView" Name="BoiasPorCanalView">
<args ct="1">
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
<VO It="1" Sz="10" St="0" im="1" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.HistoricoManutencaoBoiaView" Name="HistoricoManutencaoBoiaView">
<args ct="2">
<arg>
<![CDATA[XPPP ]]>
</arg>
<arg>
07/09/2004 12:07:52 org.apache.struts.util.PropertyMessageResources <init>
INFO: Initializing, config='org.apache.struts.taglib.logic.LocalStrings', returnNull=true
<![CDATA[21]]>
</arg>
</args>
</VO>
</VO>
</AM>
[228] **insert** id=1, parid=-1, collid=6844, keyArr.len=-1, cont.len=1043
[229] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[230] **commit** #pending ops=1
[231] **insert** id=-1, parid=0, collid=6844, keyArr.len=-1, cont.len=665
[232] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[233] **commit** #pending ops=1
[234] Getting a connection for internal use...
[235] Creating internal connection...
[236] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[237] **deleteAll** collid=6838
[238] stmt: delete "PS_TXN" where collid=:1
[239] **commit** #pending ops=1
[240] Reusing a cached session application module instance
[241] Getting a connection for internal use...
[242] Creating internal connection...
[243] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[244] Column count: 5
[245] ViewObject : Created new QUERY statement
[246] SELECT HistoricoManutencaoBoia.H56CODBO, HistoricoManutencaoBoia.H56DTMAN, HistoricoManutencaoBoia.H56DESCR, HistoricoManutencaoBoia.H56SCANA FROM H56HIMAT HistoricoManutencaoBoia WHERE HistoricoManutencaoBoia.H56CODBO = ? and HistoricoManutencaoBoia.H56SCANA = ?
[247] Binding param 1: XPPP
[248] Binding param 2: 21
[249] Clearing VO cache for HistoricoManutencaoBoiaView
[250] Clear QueryCollection in cache...
[251] Column count: 5
[252] ViewObject : Reusing defined prepared Statement
[253] Binding param 1: XPPP
[254] Binding param 2: 21
[255] Application Module failover is enabled
[256] Getting a connection for internal use...
[257] Creating internal connection...
[258] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[259] <AM MomVer="0">
<cd/>
<TXN Def="0" New="0" Lok="1"/>
<VO>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.TipoManutencaoBoiaView" Name="TipoManutencaoBoiaView"/>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.BoiasPorCanalView" Name="BoiasPorCanalView">
<args ct="1">
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
<VO It="1" Sz="10" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.HistoricoManutencaoBoiaView" Name="HistoricoManutencaoBoiaView">
<args ct="2">
<arg>
<![CDATA[XPPP ]]>
</arg>
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
</VO>
</AM>
[260] **insert** id=1, parid=-1, collid=6847, keyArr.len=-1, cont.len=1036
[261] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[262] **commit** #pending ops=1
[263] **insert** id=-1, parid=0, collid=6847, keyArr.len=-1, cont.len=665
[264] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[265] **commit** #pending ops=1
[266] Getting a connection for internal use...
[267] Creating internal connection...
[268] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[269] **deleteAll** collid=6844
[270] stmt: delete "PS_TXN" where collid=:1
[271] **commit** #pending ops=1
[272] Reusing a cached session application module instance
[273] Getting a connection for internal use...
[274] Creating internal connection...
[275] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[276] Column count: 6
[277] ViewObject close prepared statements...
[278] ViewObject : Created new QUERY statement
[279] SELECT ManutencaoBoiaEntity.H6ASCANA, ManutencaoBoiaEntity.H6ACODBO, ManutencaoBoiaEntity.H6ADTMAN, ManutencaoBoiaEntity.H6ASTPMB, TipoManutencaoBoiaEntity.H5PSTPMB AS CODIGO_TIPO_MANUTENCAO_BOIA1, TipoManutencaoBoiaEntity.H5PNOMAN FROM H6AMABOT ManutencaoBoiaEntity, H5PTPMBT TipoManutencaoBoiaEntity WHERE (ManutencaoBoiaEntity.H6ASCANA = :1 AND ManutencaoBoiaEntity.H6ACODBO = :2 AND ManutencaoBoiaEntity.H6ADTMAN = :3)
[280] Binding param 1: 21
[281] Binding param 2: XPPP
[282] Binding param 3: 2004-06-02
07/09/2004 12:08:19 org.apache.struts.util.PropertyMessageResources <init>
INFO: Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
[283] Application Module failover is enabled
[284] Getting a connection for internal use...
[285] Creating internal connection...
[286] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[287] <AM MomVer="0">
<cd/>
<TXN Def="0" New="0" Lok="1"/>
<VO>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.TipoManutencaoBoiaView" Name="TipoManutencaoBoiaView"/>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.BoiasPorCanalView" Name="BoiasPorCanalView">
<args ct="1">
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
<VO It="1" Sz="10" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.HistoricoManutencaoBoiaView" Name="HistoricoManutencaoBoiaView">
<args ct="2">
<arg>
<![CDATA[XPPP ]]>
</arg>
<arg>
<![CDAT07/09/2004 12:08:19 org.apache.struts.util.PropertyMessageResources <init>
INFO: Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
07/09/2004 12:08:20 org.apache.struts.util.PropertyMessageResources <init>
INFO: Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
A[21]]>
</arg>
</args>
</VO>
</VO>
</AM>
[288] **insert** id=1, parid=-1, collid=6849, keyArr.len=-1, cont.len=1036
[289] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[290] **commit** #pending ops=1
[291] **insert** id=-1, parid=0, collid=6849, keyArr.len=-1, cont.len=665
[292] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[293] **commit** #pending ops=1
[294] Getting a connection for internal use...
[295] Creating internal connection...
[296] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[297] **deleteAll** collid=6847
[298] stmt: delete "PS_TXN" where collid=:1
[299] **commit** #pending ops=1
[300] Reusing a cached session application module instance
[301] Getting a connection for internal use...
[302] Creating internal connection...
[303] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[304] OracleSQLBuilder Executing Select on: H56HIMAT (true)
[305] Built select: 'SELECT H56CODBO, H56DTMAN, H56DESCR, H56SCANA FROM H56HIMAT HistoricoManutencaoBoiaEntity'
[306] Executing LOCK...SELECT H56CODBO, H56DTMAN, H56DESCR, H56SCANA FROM H56HIMAT HistoricoManutencaoBoiaEntity WHERE H56CODBO=:1 AND H56DTMAN=:2 AND H56SCANA=:3 FOR UPDATE NOWAIT
[307] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/entity/RelatoriosSetorSinalizacaoNauticaBoiaAssociation.xml file
[308] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/entity/RelatorioSetorSinalizacaoNauticaEntity.xml file
[309] OracleSQLBuilder Executing Select on: H55BOIAT (true)
[310] Built select: 'SELECT H55SCANA, H55CODBO, H55LATGR, H55LATMI, H55LATSE, H55INDLA, H55VALEX, H55LONGR, H55LONMI, H55LONSE, H55INDLO, H55VALEY, H55CORLP, H55REMOV, H55NRORD, H55PROJE, H55PINTU, H55CARAC, H55EQLUM, H55FOLUM, H55EQFUN, H55EQMON FROM H55BOIAT BoiaEntity'
[311] Executing LOCK...SELECT H55SCANA, H55CODBO, H55LATGR, H55LATMI, H55LATSE, H55INDLA, H55VALEX, H55LONGR, H55LONMI, H55LONSE, H55INDLO, H55VALEY, H55CORLP, H55REMOV, H55NRORD, H55PROJE, H55PINTU, H55CARAC, H55EQLUM, H55FOLUM, H55EQFUN, H55EQMON FROM H55BOIAT BoiaEntity WHERE H55SCANA=:1 AND H55CODBO=:2 FOR UPDATE NOWAIT
[312] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/entity/TipoManutencaoBoiaAssociation.xml file
[313] OracleSQLBuilder Executing Select on: H6AMABOT (true)
[314] Built select: 'SELECT H6ASCANA, H6ACODBO, H6ADTMAN, H6ASTPMB FROM H6AMABOT ManutencaoBoiaEntity'
[315] Executing LOCK...SELECT H6ASCANA, H6ACODBO, H6ADTMAN, H6ASTPMB FROM H6AMABOT ManutencaoBoiaEntity WHERE H6ASCANA=:1 AND H6ACODBO=:2 AND H6ADTMAN=:3 AND H6ASTPMB=:4 FOR UPDATE NOWAIT
[316] QueryCollection: afterRemove(0)
[317] ViewRowCache: removeReference
[318] ViewRowCache: removeReference
[319] QueryCollection: afterRemove(5)
[320] ViewRowCache: removeReference
[321] ViewRowCache: removeReference
[322] QueryCollection: afterRemove(10)
[323] ViewRowCache: removeReference
[324] ViewRowCache: removeReference
[325] QueryCollection: afterRemove(15)
[326] ViewRowCache: removeReference
[327] ViewRowCache: removeReference
[328] QueryCollection: afterRemove(20)
[329] ViewRowCache: removeReference
[330] ViewRowCache: removeReference
[331] QueryCollection: afterRemove(25)
[332] ViewRowCache: removeReference
[333] ViewRowCache: removeReference
[334] OracleSQLBuilder Executing Select on: H6AMABOT (true)
[335] Reusing prepared LOCK statement
[336] QueryCollection: afterRemove(0)
[337] ViewRowCache: removeReference
[338] ViewRowCache: removeReference
[339] QueryCollection: afterRemove(4)
[340] ViewRowCache: removeReference
[341] ViewRowCache: removeReference
[342] QueryCollection: afterRemove(8)
[343] ViewRowCache: removeReference
[344] ViewRowCache: removeReference
[345] QueryCollection: afterRemove(12)
[346] ViewRowCache: removeReference
[347] ViewRowCache: removeReference
[348] QueryCollection: afterRemove(16)
[349] ViewRowCache: removeReference
[350] ViewRowCache: removeReference
[351] QueryCollection: afterRemove(20)
[352] ViewRowCache: removeReference
[353] ViewRowCache: removeReference
[354] OracleSQLBuilder Executing Select on: H6AMABOT (true)
[355] Reusing prepared LOCK statement
[356] QueryCollection: afterRemove(0)
[357] ViewRowCache: removeReference
[358] ViewRowCache: removeReference
[359] QueryCollection: afterRemove(3)
[360] ViewRowCache: removeReference
[361] ViewRowCache: removeReference
[362] QueryCollection: afterRemove(6)
[363] ViewRowCache: removeReference
[364] ViewRowCache: removeReference
[365] QueryCollection: afterRemove(9)
[366] ViewRowCache: removeReference
[367] ViewRowCache: removeReference
[368] QueryCollection: afterRemove(12)
[369] ViewRowCache: removeReference
[370] ViewRowCache: removeReference
[371] QueryCollection: afterRemove(15)
[372] ViewRowCache: removeReference
[373] ViewRowCache: removeReference
[374] OracleSQLBuilder Executing Select on: H6AMABOT (true)
[375] Reusing prepared LOCK statement
[376] QueryCollection: afterRemove(0)
[377] ViewRowCache: removeReference
[378] ViewRowCache: removeReference
[379] QueryCollection: afterRemove(2)
[380] ViewRowCache: removeReference
[381] ViewRowCache: removeReference
[382] QueryCollection: afterRemove(4)
[383] ViewRowCache: removeReference
[384] ViewRowCache: removeReference
[385] QueryCollection: afterRemove(6)
[386] ViewRowCache: removeReference
[387] ViewRowCache: removeReference
[388] QueryCollection: afterRemove(8)
[389] ViewRowCache: removeReference
[390] ViewRowCache: removeReference
[391] QueryCollection: afterRemove(10)
[392] ViewRowCache: removeReference
[393] ViewRowCache: removeReference
[394] OracleSQLBuilder Executing Select on: H6AMABOT (true)
[395] Reusing prepared LOCK statement
[396] QueryCollection: afterRemove(0)
[397] ViewRowCache: removeReference
[398] ViewRowCache: removeReference
[399] QueryCollection: afterRemove(1)
[400] ViewRowCache: removeReference
[401] ViewRowCache: removeReference
[402] QueryCollection: afterRemove(2)
[403] ViewRowCache: removeReference
[404] ViewRowCache: removeReference
[405] QueryCollection: afterRemove(3)
[406] ViewRowCache: removeReference
[407] ViewRowCache: removeReference
[408] QueryCollection: afterRemove(4)
[409] ViewRowCache: removeReference
[410] ViewRowCache: removeReference
[411] QueryCollection: afterRemove(5)
[412] ViewRowCache: removeReference
[413] ViewRowCache: removeReference
[414] OracleSQLBuilder Executing Select on: H6AMABOT (true)
[415] Reusing prepared LOCK statement
[416] QueryCollection: afterRemove(0)
[417] ViewRowCache: removeReference
[418] ViewRowCache: removeReference
[419] QueryCollection: afterRemove(0)
[420] ViewRowCache: removeReference
[421] ViewRowCache: removeReference
[422] QueryCollection: afterRemove(0)
[423] ViewRowCache: removeReference
[424] ViewRowCache: removeReference
[425] QueryCollection: afterRemove(0)
[426] ViewRowCache: removeReference
[427] ViewRowCache: removeReference
[428] QueryCollection: afterRemove(0)
[429] ViewRowCache: removeReference
[430] ViewRowCache: removeReference
[431] QueryCollection: afterRemove(0)
[432] ViewRowCache: removeReference
[433] ViewRowCache: removeReference
[434] OracleSQLBuilder Executing DML on: H56HIMAT (Atualizar)
[435] BEGIN UPDATE H56HIMAT HistoricoManutencaoBoiaEntity SET H56CODBO=:1,H56DTMAN=:2,H56DESCR=:3 WHERE H56CODBO=:4 AND H56DTMAN=:5 AND H56SCANA=:6 RETURNING H56CODBO INTO :7; END;
[436] OracleSQLBuilder Executing DML on: H6AMABOT (Deletar)
[437] DELETE FROM H6AMABOT ManutencaoBoiaEntity WHERE H6ASCANA=:1 AND H6ACODBO=:2 AND H6ADTMAN=:3 AND H6ASTPMB=:4
[438] OracleSQLBuilder Executing DML on: H6AMABOT (Deletar)
[439] DELETE FROM H6AMABOT ManutencaoBoiaEntity WHERE H6ASCANA=:1 AND H6ACODBO=:2 AND H6ADTMAN=:3 AND H6ASTPMB=:4
[440] OracleSQLBuilder Executing DML on: H6AMABOT (Deletar)
[441] DELETE FROM H6AMABOT ManutencaoBoiaEntity WHERE H6ASCANA=:1 AND H6ACODBO=:2 AND H6ADTMAN=:3 AND H6ASTPMB=:4
[442] OracleSQLBuilder Executing DML on: H6AMABOT (Deletar)
[443] DELETE FROM H6AMABOT ManutencaoBoiaEntity WHERE H6ASCANA=:1 AND H6ACODBO=:2 AND H6ADTMAN=:3 AND H6ASTPMB=:4
[444] OracleSQLBuilder Executing DML on: H6AMABOT (Deletar)
[445] DELETE FROM H6AMABOT ManutencaoBoiaEntity WHERE H6ASCANA=:1 AND H6ACODBO=:2 AND H6ADTMAN=:3 AND H6ASTPMB=:4
[446] OracleSQLBuilder Executing DML on: H6AMABOT (Deletar)
[447] DELETE FROM H6AMABOT ManutencaoBoiaEntity WHERE H6ASCANA=:1 AND H6ACODBO=:2 AND H6ADTMAN=:3 AND H6ASTPMB=:4
[448] BaseSQLBuilder: releaseSavepoint 'BO_SP' ignored
[449] BaseSQLBuilder: releaseSavepoint 'BO_SP' ignored
[450] TipoManutencaoBoiaView notify COMMIT ...
[451] BoiasPorCanalView notify COMMIT ...
[452] HistoricoManutencaoBoiaView notify COMMIT ...
[453] ManutencaoBoiaEntity_ManutencaoBoiaAssociation_ManutencaoBoiaView notify COMMIT ...
[454] EntityCache close prepared statement
[455] EntityCache close prepared statement
[456] EntityCache close prepared statement
[457] Clearing VO cache for BoiasPorCanalView
[458] Clear QueryCollection in cache...
[459] Column count: 23
[460] ViewObject : Reusing defined prepared Statement
[461] Binding param 1: 21
[462] Clearing VO cache for TipoManutencaoBoiaView
[463] Clear QueryCollection in cache...
[464] Column count: 2
[465] ViewObject : Reusing defined prepared Statement
[466] Application Module failover is enabled
[467] Getting a connection for internal use...
[468] Creating internal connection...
[469] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[470] <AM MomVer="0">
<cd/>
<TXN Def="0" New="0" Lok="1"/>
<VO>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.TipoManutencaoBoiaView" Name="TipoManutencaoBoiaView"/>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.BoiasPorCanalView" Name="BoiasPorCanalView">
<args ct="1">
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
<VO It="1" Sz="10" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.HistoricoManutencaoBoiaView" Name="HistoricoManutencaoBoiaView">
<args ct="2">
<arg>
<![CDATA[XPPP ]]>
</arg>
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
</VO>
</AM>
[471] **insert** id=1, parid=-1, collid=6850, keyArr.len=-1, cont.len=1036
[472] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[473] **commit** #pending ops=1
[474] **insert** id=-1, parid=0, collid=6850, keyArr.len=-1, cont.len=665
[475] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[476] **commit** #pending ops=1
[477] Getting a connection for internal use...
[478] Creating internal connection...
[479] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[480] **deleteAll** collid=6849
[481] stmt: delete "PS_TXN" where collid=:1
[482] **commit** #pending ops=1
[483] Reusing a cached session application module instance
[484] Getting a connection for internal use...
[485] Creating internal connection...
[486] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[487] Application Module failover is enabled
[488] Getting a connection for internal use...
[489] Creating internal connection...
[490] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[491] <AM MomVer="0">
<cd/>
<TXN Def="0" New="0" Lok="1"/>
<VO>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.TipoManutencaoBoiaView" Name="TipoManutencaoBoiaView"/>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.BoiasPorCanalView" Name="BoiasPorCanalView">
<args ct="1">
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
<VO It="1" Sz="10" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.HistoricoManutencaoBoiaView" Name="HistoricoManutencaoBoiaView">
<args ct="2">
<arg>
<![CDATA[XPPP ]]>
</arg>
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
</VO>
</AM>
[492] **insert** id=1, parid=-1, collid=6851, keyArr.len=-1, cont.len=1036
[493] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[494] **commit** #pending ops=1
[495] **insert** id=-1, parid=0, collid=6851, keyArr.len=-1, cont.len=665
[496] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[497] **commit** #pending ops=1
[498] Getting a connection for internal use...
[499] Creating internal connection...
[500] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[501] **deleteAll** collid=6850
[502] stmt: delete "PS_TXN" where collid=:1
[503] **commit** #pending ops=1
[504] Reusing a cached session application module instance
[505] Getting a connection for internal use...
[506] Creating internal connection...
[507] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[508] OracleSQLBuilder Executing Select on: H56HIMAT (true)
[509] Built select: 'SELECT H56CODBO, H56DTMAN, H56DESCR, H56SCANA FROM H56HIMAT HistoricoManutencaoBoiaEntity'
[510] Executing LOCK...SELECT H56CODBO, H56DTMAN, H56DESCR, H56SCANA FROM H56HIMAT HistoricoManutencaoBoiaEntity WHERE H56CODBO=:1 AND H56DTMAN=:2 AND H56SCANA=:3 FOR UPDATE NOWAIT
[511] OracleSQLBuilder Executing Select on: H55BOIAT (true)
[512] Built select: 'SELECT H55SCANA, H55CODBO, H55LATGR, H55LATMI, H55LATSE, H55INDLA, H55VALEX, H55LONGR, H55LONMI, H55LONSE, H55INDLO, H55VALEY, H55CORLP, H55REMOV, H55NRORD, H55PROJE, H55PINTU, H55CARAC, H55EQLUM, H55FOLUM, H55EQFUN, H55EQMON FROM H55BOIAT BoiaEntity'
[513] Executing LOCK...SELECT H55SCANA, H55CODBO, H55LATGR, H55LATMI, H55LATSE, H55INDLA, H55VALEX, H55LONGR, H55LONMI, H55LONSE, H55INDLO, H55VALEY, H55CORLP, H55REMOV, H55NRORD, H55PROJE, H55PINTU, H55CARAC, H55EQLUM, H55FOLUM, H55EQFUN, H55EQMON FROM H55BOIAT BoiaEntity WHERE H55SCANA=:1 AND H55CODBO=:2 FOR UPDATE NOWAIT
[514] OracleSQLBuilder Executing DML on: H56HIMAT (Atualizar)
[515] BEGIN UPDATE H56HIMAT HistoricoManutencaoBoiaEntity SET H56CODBO=:1,H56DTMAN=:2,H56DESCR=:3 WHERE H56CODBO=:4 AND H56DTMAN=:5 AND H56SCANA=:6 RETURNING H56CODBO INTO :7; END;
[516] OracleSQLBuilder Executing DML on: H6AMABOT (Inserir)
[517] BEGIN INSERT INTO H6AMABOT(H6ASCANA,H6ACODBO,H6ADTMAN,H6ASTPMB) VALUES (:1,:2,:3,:4) RETURNING H6ACODBO INTO :5; END;
[518] OracleSQLBuilder Executing DML on: H6AMABOT (Inserir)
[519] BEGIN INSERT INTO H6AMABOT(H6ASCANA,H6ACODBO,H6ADTMAN,H6ASTPMB) VALUES (:1,:2,:3,:4) RETURNING H6ACODBO INTO :5; END;
[520] OracleSQLBuilder Executing DML on: H6AMABOT (Inserir)
[521] BEGIN INSERT INTO H6AMABOT(H6ASCANA,H6ACODBO,H6ADTMAN,H6ASTPMB) VALUES (:1,:2,:3,:4) RETURNING H6ACODBO INTO :5; END;
[522] OracleSQLBuilder Executing DML on: H6AMABOT (Inserir)
[523] BEGIN INSERT INTO H6AMABOT(H6ASCANA,H6ACODBO,H6ADTMAN,H6ASTPMB) VALUES (:1,:2,:3,:4) RETURNING H6ACODBO INTO :5; END;
[524] OracleSQLBuilder Executing DML on: H6AMABOT (Inserir)
[525] BEGIN INSERT INTO H6AMABOT(H6ASCANA,H6ACODBO,H6ADTMAN,H6ASTPMB) VALUES (:1,:2,:3,:4) RETURNING H6ACODBO INTO :5; END;
[526] OracleSQLBuilder Executing DML on: H6AMABOT (Inserir)
[527] BEGIN INSERT INTO H6AMABOT(H6ASCANA,H6ACODBO,H6ADTMAN,H6ASTPMB) VALUES (:1,:2,:3,:4) RETURNING H6ACODBO INTO :5; END;
[528] BaseSQLBuilder: releaseSavepoint 'BO_SP' ignored
[529] BaseSQLBuilder: releaseSavepoint 'BO_SP' ignored
[530] TipoManutencaoBoiaView notify COMMIT ...
[531] BoiasPorCanalView notify COMMIT ...
[532] HistoricoManutencaoBoiaView notify COMMIT ...
[533] ManutencaoBoiaEntity_ManutencaoBoiaAssociation_ManutencaoBoiaView notify COMMIT ...
[534] EntityCache close prepared statement
[535] EntityCache close prepared statement
[536] Clearing VO cache for BoiasPorCanalView
[537] Clear QueryCollection in cache...
[538] Column count: 23
[539] ViewObject : Reusing defined prepared Statement
[540] Binding param 1: 21
[541] Clearing VO cache for TipoManutencaoBoiaView
[542] Clear QueryCollection in cache...
[543] Column count: 2
[544] ViewObject : Reusing defined prepared Statement
[545] Application Module failover is enabled
[546] Getting a connection for internal use...
[547] Creating internal connection...
[548] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[549] <AM MomVer="0">
<cd/>
<TXN Def="0" New="0" Lok="1"/>
<VO>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.TipoManutencaoBoiaView" Name="TipoManutencaoBoiaView"/>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.BoiasPorCanalView" Name="BoiasPorCanalView">
<args ct="1">
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
<VO It="1" Sz="10" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.HistoricoManutencaoBoiaView" Name="HistoricoManutencaoBoiaView">
<args ct="2">
<arg>
<![CDATA[XPPP ]]>
</arg>
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
</VO>
</AM>
[550] **insert** id=1, parid=-1, collid=6853, keyArr.len=-1, cont.len=1036
[551] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[552] **commit** #pending ops=1
[553] **insert** id=-1, parid=0, collid=6853, keyArr.len=-1, cont.len=665
[554] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[555] **commit** #pending ops=1
[556] Getting a connection for internal use...
[557] Creating internal connection...
[558] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[559] **deleteAll** collid=6851
[560] stmt: delete "PS_TXN" where collid=:1
[561] **commit** #pending ops=1
[562] Reusing a cached session application module instance
[563] Getting a connection for internal use...
[564] Creating internal connection...
[565] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[566] Application Module failover is enabled
[567] Getting a connection for internal use...
[568] Creating internal connection...
[569] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[570] <AM MomVer="0">
<cd/>
<TXN Def="0" New="0" Lok="1"/>
<VO>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.TipoManutencaoBoiaView" Name="TipoManutencaoBoiaView"/>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.BoiasPorCanalView" Name="BoiasPorCanalView">
<args ct="1">
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
<VO It="1" Sz="10" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.HistoricoManutencaoBoiaView" Name="HistoricoManutencaoBoiaView">
<args ct="2">
<arg>
<![CDATA[XPPP ]]>
</arg>
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
</VO>
</AM>
[571] **insert** id=1, parid=-1, collid=6854, keyArr.len=-1, cont.len=1036
[572] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[573] **commit** #pending ops=1
[574] **insert** id=-1, parid=0, collid=6854, keyArr.len=-1, cont.len=665
[575] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[576] **commit** #pending ops=1
[577] Getting a connection for internal use...
[578] Creating internal connection...
[579] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[580] **deleteAll** collid=6853
[581] stmt: delete "PS_TXN" where collid=:1
[582] **commit** #pending ops=1
[583] Reusing a cached session application module instance
[584] Getting a connection for internal use...
[585] Creating internal connection...
[586] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[587] OracleSQLBuilder Executing Select on: H56HIMAT (true)
[588] Built select: 'SELECT H56CODBO, H56DTMAN, H56DESCR, H56SCANA FROM H56HIMAT HistoricoManutencaoBoiaEntity'
[589] Executing LOCK...SELECT H56CODBO, H56DTMAN, H56DESCR, H56SCANA FROM H56HIMAT HistoricoManutencaoBoiaEntity WHERE H56CODBO=:1 AND H56DTMAN=:2 AND H56SCANA=:3 FOR UPDATE NOWAIT
[590] OracleSQLBuilder Executing Select on: H55BOIAT (true)
[591] Built select: 'SELECT H55SCANA, H55CODBO, H55LATGR, H55LATMI, H55LATSE, H55INDLA, H55VALEX, H55LONGR, H55LONMI, H55LONSE, H55INDLO, H55VALEY, H55CORLP, H55REMOV, H55NRORD, H55PROJE, H55PINTU, H55CARAC, H55EQLUM, H55FOLUM, H55EQFUN, H55EQMON FROM H55BOIAT BoiaEntity'
[592] Executing LOCK...SELECT H55SCANA, H55CODBO, H55LATGR, H55LATMI, H55LATSE, H55INDLA, H55VALEX, H55LONGR, H55LONMI, H55LONSE, H55INDLO, H55VALEY, H55CORLP, H55REMOV, H55NRORD, H55PROJE, H55PINTU, H55CARAC, H55EQLUM, H55FOLUM, H55EQFUN, H55EQMON FROM H55BOIAT BoiaEntity WHERE H55SCANA=:1 AND H55CODBO=:2 FOR UPDATE NOWAIT
[593] OracleSQLBuilder Executing Select on: H6AMABOT (true)
[594] Built select: 'SELECT H6ASCANA, H6ACODBO, H6ADTMAN, H6ASTPMB FROM H6AMABOT ManutencaoBoiaEntity'
[595] Executing LOCK...SELECT H6ASCANA, H6ACODBO, H6ADTMAN, H6ASTPMB FROM H6AMABOT ManutencaoBoiaEntity WHERE H6ASCANA=:1 AND H6ACODBO=:2 AND H6ADTMAN=:3 AND H6ASTPMB=:4 FOR UPDATE NOWAIT
[596] QueryCollection: afterRemove(0)
[597] ViewRowCache: removeReference
[598] OracleSQLBuilder Executing Select on: H6AMABOT (true)
[599] Reusing prepared LOCK statement
[600] QueryCollection: afterRemove(0)
[601] ViewRowCache: removeReference
[602] OracleSQLBuilder Executing Select on: H6AMABOT (true)
[603] Reusing prepared LOCK statement
[604] QueryCollection: afterRemove(0)
[605] ViewRowCache: removeReference
[606] OracleSQLBuilder Executing Select on: H6AMABOT (true)
[607] Reusing prepared LOCK statement
[608] QueryCollection: afterRemove(0)
[609] ViewRowCache: removeReference
[610] OracleSQLBuilder Executing Select on: H6AMABOT (true)
[611] Reusing prepared LOCK statement
[612] QueryCollection: afterRemove(0)
[613] ViewRowCache: removeReference
[614] OracleSQLBuilder Executing Select on: H6AMABOT (true)
[615] Reusing prepared LOCK statement
[616] QueryCollection: afterRemove(0)
[617] ViewRowCache: removeReference
[618] OracleSQLBuilder Executing DML on: H56HIMAT (Atualizar)
[619] BEGIN UPDATE H56HIMAT HistoricoManutencaoBoiaEntity SET H56CODBO=:1,H56DTMAN=:2,H56DESCR=:3 WHERE H56CODBO=:4 AND H56DTMAN=:5 AND H56SCANA=:6 RETURNING H56CODBO INTO :7; END;
[620] BaseSQLBuilder: releaseSavepoint 'BO_SP' ignored
[621] BaseSQLBuilder: releaseSavepoint 'BO_SP' ignored
[622] TipoManutencaoBoiaView notify COMMIT ...
[623] BoiasPorCanalView notify COMMIT ...
[624] HistoricoManutencaoBoiaView notify COMMIT ...
[625] ManutencaoBoiaEntity_ManutencaoBoiaAssociation_ManutencaoBoiaView notify COMMIT ...
[626] EntityCache close prepared statement
[627] EntityCache close prepared statement
[628] EntityCache close prepared statement
[629] Clearing VO cache for BoiasPorCanalView
[630] Clear QueryCollection in cache...
[631] Column count: 23
[632] ViewObject : Reusing defined prepared Statement
[633] Binding param 1: 21
[634] Clearing VO cache for TipoManutencaoBoiaView
[635] Clear QueryCollection in cache...
[636] Column count: 2
[637] ViewObject : Reusing defined prepared Statement
[638] Application Module failover is enabled
[639] Getting a connection for internal use...
[640] Creating internal connection...
[641] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[642] <AM MomVer="0">
<cd/>
<TXN Def="0" New="0" Lok="1"/>
<VO>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.TipoManutencaoBoiaView" Name="TipoManutencaoBoiaView"/>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.BoiasPorCanalView" Name="BoiasPorCanalView">
<args ct="1">
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
<VO It="1" Sz="10" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.HistoricoManutencaoBoiaView" Name="HistoricoManutencaoBoiaView">
<args ct="2">
<arg>
<![CDATA[XPPP ]]>
</arg>
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
</VO>
</AM>
[643] **insert** id=1, parid=-1, collid=6855, keyArr.len=-1, cont.len=1036
[644] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[645] **commit** #pending ops=1
[646] **insert** id=-1, parid=0, collid=6855, keyArr.len=-1, cont.len=665
[647] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[648] **commit** #pending ops=1
[649] Getting a connection for internal use...
[650] Creating internal connection...
[651] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[652] **deleteAll** collid=6854
[653] stmt: delete "PS_TXN" where collid=:1
[654] **commit** #pending ops=1
[655] Reusing a cached session application module instance
[656] Getting a connection for internal use...
[657] Creating internal connection...
[658] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[659] Application Module failover is enabled
[660] Getting a connection for internal use...
[661] Creating internal connection...
[662] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[663] <AM MomVer="0">
<cd/>
<TXN Def="0" New="0" Lok="1"/>
<VO>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.TipoManutencaoBoiaView" Name="TipoManutencaoBoiaView"/>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.BoiasPorCanalView" Name="BoiasPorCanalView">
<args ct="1">
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
<VO It="1" Sz="10" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.HistoricoManutencaoBoiaView" Name="HistoricoManutencaoBoiaView">
<args ct="2">
<arg>
<![CDATA[XPPP ]]>
</arg>
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
</VO>
</AM>
[664] **insert** id=1, parid=-1, collid=6856, keyArr.len=-1, cont.len=1036
[665] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[666] **commit** #pending ops=1
[667] **insert** id=-1, parid=0, collid=6856, keyArr.len=-1, cont.len=665
[668] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[669] **commit** #pending ops=1
[670] Getting a connection for internal use...
[671] Creating internal connection...
[672] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[673] **deleteAll** collid=6855
[674] stmt: delete "PS_TXN" where collid=:1
[675] **commit** #pending ops=1
[676] Reusing a cached session application module instance
[677] Getting a connection for internal use...
[678] Creating internal connection...
[679] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[680] OracleSQLBuilder Executing Select on: H56HIMAT (true)
[681] Built select: 'SELECT H56CODBO, H56DTMAN, H56DESCR, H56SCANA FROM H56HIMAT HistoricoManutencaoBoiaEntity'
[682] Executing LOCK...SELECT H56CODBO, H56DTMAN, H56DESCR, H56SCANA FROM H56HIMAT HistoricoManutencaoBoiaEntity WHERE H56CODBO=:1 AND H56DTMAN=:2 AND H56SCANA=:3 FOR UPDATE NOWAIT
[683] OracleSQLBuilder Executing Select on: H55BOIAT (true)
[684] Built select: 'SELECT H55SCANA, H55CODBO, H55LATGR, H55LATMI, H55LATSE, H55INDLA, H55VALEX, H55LONGR, H55LONMI, H55LONSE, H55INDLO, H55VALEY, H55CORLP, H55REMOV, H55NRORD, H55PROJE, H55PINTU, H55CARAC, H55EQLUM, H55FOLUM, H55EQFUN, H55EQMON FROM H55BOIAT BoiaEntity'
[685] Executing LOCK...SELECT H55SCANA, H55CODBO, H55LATGR, H55LATMI, H55LATSE, H55INDLA, H55VALEX, H55LONGR, H55LONMI, H55LONSE, H55INDLO, H55VALEY, H55CORLP, H55REMOV, H55NRORD, H55PROJE, H55PINTU, H55CARAC, H55EQLUM, H55FOLUM, H55EQFUN, H55EQMON FROM H55BOIAT BoiaEntity WHERE H55SCANA=:1 AND H55CODBO=:2 FOR UPDATE NOWAIT
[686] EntityCache:add WARNING - a new row with a key equal to a removed row
[687] EntityCache:add WARNING - a new row with a key equal to a removed row
[688] EntityCache:add WARNING - a new row with a key equal to a removed row
[689] EntityCache:add WARNING - a new row with a key equal to a removed row
[690] EntityCache:add WARNING - a new row with a key equal to a removed row
[691] EntityCache:add WARNING - a new row with a key equal to a removed row
[692] OracleSQLBuilder Executing DML on: H56HIMAT (Atualizar)
[693] BEGIN UPDATE H56HIMAT HistoricoManutencaoBoiaEntity SET H56CODBO=:1,H56DTMAN=:2,H56DESCR=:3 WHERE H56CODBO=:4 AND H56DTMAN=:5 AND H56SCANA=:6 RETURNING H56CODBO INTO :7; END;
[694] OracleSQLBuilder Executing DML on: H6AMABOT (Inserir)
[695] BEGIN INSERT INTO H6AMABOT(H6ASCANA,H6ACODBO,H6ADTMAN,H6ASTPMB) VALUES (:1,:2,:3,:4) RETURNING H6ACODBO INTO :5; END;
[696] OracleSQLBuilderImpl.doEntityDML failed...
[697] X/Open SQL State is: 23000
[698] java.sql.SQLException: ORA-00001: restriÃ§Ã£o exclusiva (KITBORDO.PK_H6AMABOT) violada
ORA-06512: em line 1
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:187)
     at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:241)
     at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:543)
     at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1477)
     at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:888)
     at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:2004)
     at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:1924)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2562)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:452)
     at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:526)
     at oracle.jbo.server.OracleSQLBuilderImpl.doEntityDML(OracleSQLBuilderImpl.java:370)

Hi Sung, Thanks for your reply.
Leonardo:
If I understand your msg correctly, I'm wondering if
the data model as you described is complete.
You state that you have MaintenanceType, Maintenance,
and MaintenanceOrder, but don't you need
MaintenanceOrderLine?MaintenanceOrderLine is what I'm calling Maintenance. A Maintenace record is used just to link a MaintenanceOrder to a MaintenanceType
>
Otherwise, you say that you removed all Maintenance's
in step 2). How did you form a list of all
Maintenance's in step 4)? How do you form this
list?
was raised due to unique constraint violationAt step 3) I'm using a view object, MaintenanceTypeView, to create a list of checkboxes, one for each MaintenanceType.
At step 4), for each MaintenanceType selected in the form, I'm creating a new Maintenance using:
//All codes of maintenance types, that already have a
//respective maintenance record in the db, have already
//been remove from the maintenancesToInsert list at this
//point
for (Iterator iter = maintenancesToInsert.iterator(); iter.hasNext();) {
MaintenanceViewRow maintenanceRow = (MaintenanceViewRow) maintenanceView.createRow();
maintenanceRow.setMaintenanceTypeCode(Integer.valueOf((String)iter.next()));
maintenanceView.insertRow(maintenanceRow);
>
Sung

Why does "Link Media" behave differently when used as a keyboard shortcut vs when right clicked???

Not sure whether anyone else is encountering this, but the "Link Media" command behaves differently when right clicked as opposed to when used as a keyboard shortcut.
When you right click to select that option for an offline file, you get only the corresponding disconnected source media. But when you execute "Link Media" via a keyboard shortcut, PP brings up a huge list of all other offline media. Why does it only do that when you use the keyboard shortcut for "Link Media" but not when you right click "Link Media".
I'd like to get the Link Media command to behave via the keyboard shortcut the same way it behaves when right clicked. I don't want to have to deal with relinking a hundred other files, but just the single offline file I'm working on.

Among the alternatives not mentioned... Using a TiVo DVR, rather than the X1; a Roamio Plus or Pro would solve both the concern over the quality of the DVR, as well as providing the MoCA bridge capability the poster so desperately wanted the X1 DVR to provide. (Although the TiVo's support only MoCA 1.1.) Just get a third-party MoCA adapter for the distant location. Why the hang-up on having a device provided by Comcast? This seems especially ironic given the opinions expressed regarding payments over time to Comcast. If a MoCA 2.0 bridge was the requirement, they don't exist outside providers. So couldn't the poster have simply requested a replacement XB3 from the local office and configured it down to only providing MoCA bridging -- and perhaps as a wireless access point? Comcast would bill him the monthly rate for the extra device, but such is the state of MoCA 2.0. Much of the OP sounds like frustration over devices providing capabilities the poster *thinks* they should have.

Sound Soap equivalent in Soundtrack Pro 2?

Does anyone know if there is an equivalent to Bias Sound Soap in Soundtrack Pro 2? Sound Soap clears hum and etc. while preserving the good sound. It has an easy to use interface - particularly important for newbies like me.

I haven't seen SoundSoap but Soundtrack Pro 2.0 has a "Noise Reduction" feature.
Here are the instructions :-
Noise Reduction
Some audio files contain unwanted noise, making it difficult to hear the voices, music, or
other content of the file. Soundtrack Pro features two commands, Set Noise Print and
Reduce Noise, that you can use together to reduce noise in an audio file or selection.
Set Noise Print
The Set Noise Print command lets you select part of an audio file containing only the
noise that you want to remove as a “noise print.” The noise print provides a signature of
the frequencies to reduce or remove from the file.
Setting the noise print before reducing noise is optional. If you do not set a noise print
before using the Reduce Noise command, Soundtrack Pro extracts a noise print from
the selected part of the audio file. If there is an existing noise print, it will be used, even
if it is from a different audio file, unless you set a new noise print.
To set part of an audio file as a noise print:
1 In the waveform display, select the part of the audio file containing only the noise you
want to reduce.
2 Choose Process > Noise Reduction > Set Noise Print.
The selected noise is stored as a noise print.
Reduce Noise
The Reduce Noise command uses the frequency content of the noise print to reduce
noise in the audio file or selection.
To reduce noise using the noise print:
1 In the waveform display, select the part of the audio file in which you want to reduce noise.
2 Choose Process > Noise Reduction > Reduce Noise.
The Reduce Noise dialog appears. In the Reduce Noise dialog, you can optionally set
the noise threshold and tone for noise reduction. You can also preview the noise
reduction with the dialog open.
The noise threshold determines the level below which audio in the noise print is
considered to be noise. Lowering the threshold results in only very low signals being
reduced, while raising the threshold results in more high-level signals being reduced.
To set the threshold of the noise reduction:
m In the Reduce Noise dialog, drag the Noise Threshold slider left to lower the threshold,
or drag it right to raise the threshold. You can also type a value (in decibels) in the
Noise Threshold field.
To set the amount of noise reduction:
m Drag the Reduction slider left to decrease the amount of noise reduction, or drag it
right to increase the amount of noise reduction.
To change the tone of the noise reduction:
m In the Reduce Noise dialog, drag the Tone Control slider left to preserve more
low-frequency content (bass), or drag it right to preserve high-frequency content
(treble) during noise reduction.
You can preview noise reduction with the Reduce Noise dialog open and adjust the
threshold and tone of noise reduction. You can also hear the audio file or selection with
and without noise reduction, or hear only the noise to be removed.
To preview the file with noise reduction:
m Click the Play button in the lower part of the Reduce Noise dialog.
To set the preview volume level:
m Drag the Volume slider in the lower part of the Reduce Noise dialog left to lower the
volume or right to raise the volume.
To compare the file with and without noise reduction:
m Click the Bypass button to hear the file without noise reduction. Click the button again
to hear the file with noise reduction.
To hear only the noise to be removed:
m Select the Noise Only checkbox.
To use a noise reduction preset:
1 In the Reduce Noise dialog, click Show Presets.
The Presets drawer appears.
2 In the Presets drawer, select a preset from either the Factory Presets or User Presets list.
3 Click Apply.
Is that simple enough ?
You can also set and add ambient noise.
Ian.

Issue With Page Break When Sorting is also applied on group

Hi
I am facing an issue with Page break only when I have sorting applied on the grouping that I have in the template.
The following is the sample XML
<ROWSET>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Accounts</ORGANIZATION>
<FULL_NAME>test1,</FULL_NAME>
<ELEMENT_NAME>TEST BONUS</ELEMENT_NAME>
<CLASSIFICATION>Supplemental Earnings</CLASSIFICATION>
<RUN_VALUE>250</RUN_VALUE>
<MONTH_VALUE>500</MONTH_VALUE>
<QUARTER_VALUE>500</QUARTER_VALUE>
<YEAR_VALUE>500</YEAR_VALUE>
</ROW>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Finance</ORGANIZATION>
<FULL_NAME>test2</FULL_NAME>
<ELEMENT_NAME>VOLUNTARY AD AND D</ELEMENT_NAME>
<CLASSIFICATION>Voluntary Deductions</CLASSIFICATION>
<RUN_VALUE>5.19</RUN_VALUE>
<MONTH_VALUE>10.38</MONTH_VALUE>
<QUARTER_VALUE>10.38</QUARTER_VALUE>
<YEAR_VALUE>10.38</YEAR_VALUE>
</ROW>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Finance</ORGANIZATION>
<FULL_NAME>test3</FULL_NAME>
<ELEMENT_NAME>HMO MEDICAL</ELEMENT_NAME>
<CLASSIFICATION>Pre-Tax Deductions</CLASSIFICATION>
<RUN_VALUE>19.67</RUN_VALUE>
<MONTH_VALUE>39.34</MONTH_VALUE>
<QUARTER_VALUE>39.34</QUARTER_VALUE>
<YEAR_VALUE>39.34</YEAR_VALUE>
</ROW>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Finance</ORGANIZATION>
<FULL_NAME>test4</FULL_NAME>
<ELEMENT_NAME>PENSION NR DC</ELEMENT_NAME>
<CLASSIFICATION>Pre-Tax Deductions</CLASSIFICATION>
<RUN_VALUE>0</RUN_VALUE>
<MONTH_VALUE>360</MONTH_VALUE>
<QUARTER_VALUE>360</QUARTER_VALUE>
<YEAR_VALUE>360</YEAR_VALUE>
</ROW>
</ROWSET>
In the template I group the data based on CLASSIFICATION and then sort on the same column CLASSIFICATION. I have a page-break applied for every group.
When I generate the PDF, I am not getting the page-breaks for every group. Instead some of them are displayed in the same page.
But when I remove the sorting that I had in the template on the column CLASSIFICATION, I am getting the output in the desired way but not in a sorted order.
kumar

Hi All,
I am using MS-WORD 2007 and BI Publisher desktop 10.1.3.3.3.
When I use split-by-page-break, splitting is performed for every line .. but not for group of lines.
Can anybody throw some light on this?
FYI...
I am using this code:
?if: position() mod 6= 0?
?split-by-page-break:?
?end if?
(Of course with in tags)
in G_LINES loop.
Can anybody help me out :-(
--Saritha

My 2008 Mac Pro running Lion will not play HDV1080i60 footage in FCP 7. When I open the sequence settings, all HDV codecs are hdv1, hdv2, hdv3, and so forth. Anyone have any idea how to fix this?

My 2006 - 2008 Mac Pro running Lion will not play HDV 1080i60 footage in FCP 7. When I open the sequence settings, all HDV codecs are hdv1, hdv2, hdv3, and so forth. However, when I open the project on my other Mac Pro running Snow Leopard and FCP 6, the footage works fine as it does on my newer Imac running Mavericks and FCP 7. I have tried a Quicktime update on the Mac Pro that the footage doesn't work on but it says that I already have the newest version of Quicktime installed. I have also tried reinstalling the Final Cut Pro Studio twice, still no fix. I'm completely out of solutions and need to be able to edit HDV footage on this machine. Any help would be great. Thanks.

there was a recent software update that seemed to screw HDV up. Do some searching here over the last month or 2 and you'll find a bunch of posts and some possible solutions.
Worst case scenario, do as Shane suggests. But might I suggest you take a look at the user tips section of the forum. there are some great tips on how to prevent these sorts of problems by cloning your startup drive, etc.

I am unable to apply my downloaded update. When I try to apply it and restart firefox, it still says 'apply downloaded update now...'. Why can't I apply this update and what do I do about it?

I am unable to apply my downloaded update. When I try to apply it and restart firefox, it still says 'apply downloaded update now...'. Why can't I apply this update and what do I do about it?

Checked out that link and everything seems to be in order on this machine at this time.
I only have CC installed on this one machine, not even my secondary machine like is permitted. it seems odd that I'm asked to re-accept the Licence Agreement as often as I am. If I had to guess, it's almost every week, if not multiple times some weeks, that all the software will decide I should have to view the licence agreement.
Edit: I've never had any noticeable "errors" activating or anything like that. I just get asked to do it quite frequently.
This activation screen isn't too annoying (it involves clicking one single button), but like I stated earlier, if I'm trying to launch the software by double-clicking on a PSD, AI, PPROJ, AEP, etc... that file will fail to open.
I feel like that's probably not really a bug, but it is frustrating, since I did launch the application with the intent to edit that specific file I tried to open.
Again, something that you guys may consider working on.
Another annoyance is that: agreeing to the licence agreement is a per-application task, so if I see that Licence Agreement dialogue window by opening Photoshop (for example), I know that every other piece of software I have in the suite (Illustrator, Premiere, After Effects, Audition) will be showing me that screen on it's next launch. Probably deliberate for legal purposes that I can't just agree once for the whole suite, but heck, it would save me a lot of minor headaches if it was a unified agreement.

Open pdf says "please fill out the following form" when I attempt to apply redactions, I get an error message. How do I "turn off" the form portion of the document? I assume that is the problem since I have not had this issue with any of the other files

I am attempting to redact a large pdf file. When I open the file, it has a bar across the top with the message "please fill out the following form". I can mark redactions, but when I attempt to apply them I get a message saying, "In order to proceed Digital Signatures must be removed and the document must be fully authorized. Do you want to make these changes and continue?" I click "ok". Then I get a message saying, "an internal error occurred." How do I get around this problem?

You cannot redact a signed document. This is because one of the things signatures guarantee is access to the OLDER document (i.e. there will be an unredacted copy in there).
In general you cannot remove signatures, but sometimes you can. Look under the Signatures tab (right click on left vertical bar if there isn't one) to see if it is removable.

September 2011 MacBookAir4,2 1.7 GHz White noise even when sound turned off

Since new this MacAir has had a white noise like a tv not tuned in even when sound is off. Gets worse as it gets warmer. Seems to be getting worse then ever.(summer). Usually connected to a Thunderbolt Display and makes noise only when display is attached. Disconnect the display and the noise goes quite after a few minutes till display is again attached.
Mountain Lion OS X 10.8.2 (12C60)
I think it is the Cooling Fans making the noise and the Thunderbolt connector gets hot after a few minutes.
Rom Ver MBA41.0077.B0F
Regards
Barry

Hello and Welcome to Apple Discussions.
Try checking the hard disk for errors just in case.
Open Disk Utility, in the Utilities folder in the Applications folder.
Insert your Mac OS X Install disc in your computer’s optical drive or an optical drive connected to your computer, and then restart your computer. When you hear the startup tone, hold down the C key until you see the progress indicator, which looks like a spinning gear.
Follow the onscreen instructions until the menu bar appears with the Utilities menu in it, choose Utilities > Disk Utility, click First Aid, and then click Verify. Of Disk Utility reports errors, click Repair. When it's finished, from the Menu Bar, select Utilities/Startup Disk. In the Startup Disk window select MacintoshHD 10.x.x and click Restart.
Also, while you have Disk Utility open, Repair Disk Permissions, reboot and see if the sound anomaly still exists.
Carolyn

Error when calling SOAP Runtime functions

Hi Guys,
I have a requirement in which i have to consume a webservice and get a response from it but when i consumed the web service and tried to test it i got the below error please let me know solution for this as it is very urgent and also i am very new to web services stuff
Error when calling SOAP Runtime functions: SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_CONNECTION_FAILED")
Thanks
shivraj

Hi,
Have a look at this blog from Michal Krawczyk to find a solution:
The specified item was not found.
Hope this helps,
Grzegorz

Why doesn't OTM display the Count of test cases when a Filter is applied

Hi,
I would like to know if there is a way to get the count of test cases returned when a filter is applied in OTM
Though the Group By condition returns the number/count of test case, why a particular filter when applied, does not display/return the count of test cases?

User just wants to get a count when a filter applied? If a report has to be created for a query/filter, then that conveys that OTM lacks usability.
How about users who does not access to Reports Tab, users who dont have access to create reports?

Does Sountrack Pro have a plug-in similar to "Sound Soap'?

Long film. Lot of difficult interview material ... noise noise.
Would like to be able to do fixes while doing a final mix in Soundtrack Pro - without having to scrub all interview material with Sound Soap before hand.
Is there any effect plug-in, or combination, that might do the job right in Soundtrack Pro?
All ears,
Ben

Dr. mlehmann
Thank you. Lovely find. As good as Sound Soap.
Very much appreciated.
Ben

Error when calling SOAP Runtime functions - Please help!

Hi,
Very new to SAP. I just installed SAPNW7.0ABAPTrialSP12 (sandbox server, with default options) and setup the
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/db/7c623cf568896be10000000a11405a/content.htm">Flight Data</a>.
I wanted to invoke some of the Flight Data functions through SOAP. So I invoked the following URL:
http://localhost:8000/sap/bc/srt/rfc/sap/BAPI_FLIGHT_GETDETAIL?sap-client=000&wsdl=1.1
I get the following error:
The following error text was processed in the system NSP : Error when calling SOAP Runtime functions
The error occurred on the application server hs_NSP_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
      Method: HANDLE_REQUEST of program CL_SOAP_TRANSPORT_EXTENSN_ROOTCP
      Method: HANDLE_REQUEST of program CL_SOAP_HTTP_EXTENSION========CP
      Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_SOAP_HTTP_EXTENSION========CP
      Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
      Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
      Module: %_HTTP_START of program SAPMHTTP
FROM Runtime Error Log:
Runtime Errors                     UNCAUGHT_EXCEPTION
Exception                          CX_SOAP_CORE
     Termination occurred in the ABAP program "CL_SOAP_TRANSPORT_EXTENSN_ROOTCP" -
           in "HANDLE_REQUEST".
The main program was "SAPMHTTP ".
In the source code you have the termination point in line 37
          of the (Include) program "CL_SOAP_TRANSPORT_EXTENSN_ROOTCM004".
Does anyone have any ideas on what is going on? Thanks in advance.

Hi,
Have a look at this blog from Michal Krawczyk to find a solution:
The specified item was not found.
Hope this helps,
Grzegorz

FCP behaves funky when SOUND SOAP is applied

Similar Messages

Maybe you are looking for