FCP cannot see my Deck!!

I just updgraded from FD4.5 to FC Studio. When I log and caputre my Panasonic DV deck is not recognized. I can control the play, stop, rewind, but I do not see an image. In a prior post a person had the same problem and was told it was a quicktime 7 problem. I have Quicktime 7.1 installed it came with the OSX 4.4. Is there anything I can do? Or do I need to purchase another version of Quicktime?
Any help would be appreciated.

http://docs.info.apple.com/article.html?artnum=301852
Remove QuickTime receipts:
Go to /Library/Receipts/
Locate the QuickTime receipts files.
Select all QuickTime receipts that have version numbers as part of their names (but don't select the other QuickTime receipts). Here's an example of what they look like (you may have different receipts on your computer):
Drag the selected receipts to the Trash.
Download and install the latest version of QuickTime for Mac OS X.
After following these steps and restarting your computer, your DV device should interact with Final Cut as expected.

Similar Messages

  • FCP cannot see or add any master templates

    For some unknown reason, my FCP cannot see or add any master templates even thou all of the master templates are there in the right directory. Can someone take me through the steps to correct this issue? I have FCP 6.0.6 and Motion 3.0.2
    I appreciate any help I can get.

    http://docs.info.apple.com/article.html?artnum=301852
    Remove QuickTime receipts:
    Go to /Library/Receipts/
    Locate the QuickTime receipts files.
    Select all QuickTime receipts that have version numbers as part of their names (but don't select the other QuickTime receipts). Here's an example of what they look like (you may have different receipts on your computer):
    Drag the selected receipts to the Trash.
    Download and install the latest version of QuickTime for Mac OS X.
    After following these steps and restarting your computer, your DV device should interact with Final Cut as expected.

  • Fcp 4.5 will not see my deck??

    i have a panasonic ajd250 vtr that is connected to my G5 through firewire. The system profile sees the deck. I-Movie sees it fine and captures off the deck. When i go to FCPHD 4.5 - it wont recognize the deck and it says my firewire is missing!@#$ I am on a tight deadline with a project and this is really frustrating not to be able to capture and see my output which is looped through my deck....any ideas!! Ive tried shutting down and all that stuff but I dont get it!
    Please help -
    Seth

    Upgrade to Quicktime 7 recently?
    #30 - Deck recognition after Tiger Upgrade:
    Shane's Stock Answer #30:
    http://discussions.apple.com/thread.jspa?messageID=1063600&#1063600
    The credit for this goes to Bob Sidebotham:
    I was just walked through a repair procedure by an Apple Care person, and it fixed my camera recognition problems (I have a Canon XL1 and sometime after installing Tiger, then 10.4.1, various patches (including Quicktime 7.1) and the latest Desktop Video patch, I've been unable to use the camera with Final Cut Express, and attempts to capture would result in a FCE crash).
    The workaround is to download Quicktime manually, after removing the "receipts" which indicate that it is loaded. Specifically, I was told to do the following:
    1. Navigate to Library -> Receipts on your main drive (not from your personal folder).
    2. Remove all files of the form QuickTime*.pkg, where "*" is a version number. E.g. QuickTime600.pkg, QuickTime650.pkg, Quicktime700.pkg and QuickTime701.pkg. This simply tells your system that those packages are not installed.
    3. Go to http://www.apple.com/quicktime/downloads and click on the "download Quicktime" link. DO NOT USE THE AUTOMATIC UPDATE UTILITY. Download QuickTimeInstallerX.dmg. Double click this file (probably on your desktop) and then invoke the installer by double clicking QuickTime701.pkg.
    4. After your computer reboots, you should be able to restart FCP and see your camera.
    Shane

  • Cannot see Users folder in Final Cut Pro 10.1.1 (after OS 10.9.3 update)

    I have been working just fine with Final Cut Pro 10.1.1, on an hour long project with still and video content.
    Yesterday, I received a new OS update to 10.9.3 and afterward, when I went to import some content into my project, FCP does not see the User folder. So I cannot find my documents, still photos, etc. or the motion project I had just completed to add credits to my movie.
    My workaround was to copy the .MOV file from the Motion project to an external drive, where FCP can see anything I put in there... but it's very frustrating not to be able to import directly from my User drive, and have to copy everything to an external drive first.
    Anyone else seeing this? Any ideas?
    To be clear: When I click "Import Media" in FCP and select my main drive, I see only the following folders:
    Applications
    A folder with a bunch of numbers (not the User folder inside)
    Library
    Lost + Found
    statistic log (dimmed)
    System
    There used to be a "Users" folder, in which I could find my Documents, Photos, Movile

    Open the AppleScript Editor in the /Applications/Utilities/ folder and run:
    do shell script "chflags nohidden /Users/" with administrator privileges
    You may then need to relaunch the Finder.
    (106836)

  • Cannot see my external hard drive on the desktop

    Hi,
    I am at the tail end of a large documentary project on FCP. Suddenly, this evening my external hard drive (Maxtor One Touch III, Turbo Edition, 1.5TB) becomes sluggish. I shut down (all properly) and restart and the external hard drive is no longer on the desktop (does not mount and cannot be seen anywhere).
    I change ports (from one FW400 to another), try connecting to a different Mac (was running on an iMac, try connecting onto a G5) and still cannot see the hard drive. I try connecting using USB2 and still cannot see it on the desktop. I run disk utility and the hard drive shows up in menu on the left, I am able to run "verify disk" as well as "repair disk" - hard drive is fine, no errors no problems. However, I still am not able to access the drive - just does not show up on the desktop or anywhere else where I can get into it. I run the install disk that came with the hard drive (Maxtor) and a backup utility can detect the drive and shows that 1.37 TB of data is safe (so no data loss) but I can still not detect the Hard drive. I also noticed that the light on the hard drive is active indicating that the drive is being accessed.
    Problem is simply that both my Macs do not show the drive regardless of how I connect them to the drive (FW400, FW800, USB2 and every port has been tried).
    Need help here...please....
    I realize this might be more suited for a general OSX or Hard drive issue, but since I have always got great answers from FCP users that I am posting this question here.

    Hello all,
    Thank you for all your comments and suggestions. I downloaded Disk Warrior 4 from Alsoft - paid $108, followed the instructions to the letter (after reading and rereading sevral times) and ran the utility...it detected the Maxtor HD, pointed out several errors, repaired the errors, and then gave me the option to preview the new and compare to the old HD...this is where things went wrong. There was no HD to be seen - new or old...same problem. HD is not visible on my Finder, on the Disk Warrior Preview or on the desktop. I went ahead and rebuilt the HD...all errors fixed, Disk Warrior states that all is fine and dandy and that my hard drive should be perfect and I can access it...BUT its still not there, I cannot see it on the desktop nor anywhere else.
    It shows up in Disk Utility as a page icon - but I cannot access it.
    So, unfortunately for me...my problem still remains and I am now out a hundred bucks!
    Please, anybody out there - who can give me some direction - I would greatly appreciate it.
    BTW, the data is still all there and the light on the front of the drive keeps flashing indicating something is going on...but drive is not mounted, invisible.
    I read on the Maxtor packaging something about a built in Maxtor DriveLock - a password protected security measure against theft and loss...could I have inadvertently activated that and that is causing the problem...please advise.

  • Why is it that I cannot see my iMessages from my iPad on my iPhone?

    Why is it that I cannot see my iMessages from my iPad on my iPhone? I have both on the iCloud, both have iMessage on, and on my iPhone I show to receive at both my cell phone number and my email address that is linked to my iPad. Any suggestions?

    If its SD DV, check the following:
    · Camera is set to the proper input
    · In FCP, Canvas is set to RGB and sized to "Fit to Window or smaller
    · View->External Video is set to "All Frames"
    Do a search for Shane's Stock Answers ... I belive #8 covers this question.
    -DH

  • Cannot see new SQL 2008 R2 Express instance on Small Business Server 2011!

    Hi,
    As it is stated on the subject line, I'm having a problem after I did a new install of SQL 2008 R2 Express and put a new instance on SBS 2011.
    I'm developing a new program using SQL 2008 in C# and VB.Net. I have SQL 2008 R2 Express installed on my computer called "MSQL8R2EDATA" on my PC. Now I need to deploy it on SBS 2011 so I can do some testing on other workstations.
    I'm currently running Windows 7, 64 bit, and it's named STEVE-PC. The SBS 2011 is named SERVER1, and it's 64 bit as well.
    After installation on SERVER1 (SBS 2011), I then fired up SQL Server Configuration Manager and enabled Named Pipes, TCP/IP, and VIA.
    After I've completed the SQL Configuration on SERVER1, I went back on my PC (STEVE-PC) and I tried to use Management Studio to connect to the  new instance MSQL8R2EDATA on SBS 2011, only problem is, I only see the computer name, not the new instance
    I've installed.
    Back on SBS 2011 (SERVER1), I've verified that all the protocols are enabled, and the SQL Server Browser is automatically loaded and currently running, as well the MSQL8R2EDATA instance is automatically loaded and running, yet I still cannot see
    it from my PC (STEVE-PC). I even switched from dynamic ports to a static port of 64719 (that was what the MSQL8R2EDATA was listening on that port when it was dynamic), and then added new rules to the Windows Firewall for program of the SQLSERVR.EXE, and
    for UDP and TCP for port 64719 to "Allow All Connections" for Domain, Private, and Public; yet I still cannot connect SERVER1\MSQL8R2EDATA. I even disabled the firewall and then trying to connect once again to SBS 2001 and it still fails.
    In case you're wondering, I left it on port 64719 since there are other active SQL Servers on SBS 2011 (SharePoint, SBSMonitoring, and ACT7).
    Interestingly, when I run Management Studio on SBS 2011, I can see STEVE-PC\MSQL8R2EDATA and I'm able to log in and connect to it.
    So what's going on here?!? Why am I able to connect to STEVE-PC which is Windows 7 64 from SBS 2011 (SERVER1), but I cannot connect from my computer to that instance on SBS 2011??
    I really could use some big time help on this.
    EDIT: Sorry for the confusion, but on the Windows Firewall (WF.msc), I did add new rules for incoming connections on:
    Program incoming connections to SQLSERVR.EXE
    TCP Port 64719
    UDP Port 64719
    EDIT: To further assist, I have Management Studio installed on the SBS 2011, and I can locally log in and connect to the MSQL8R2DATA on SERVER1 with success. I even tried tcp:SERVER1\MSQL8R2DATA and again it is successful log-in and connection.
    Thanks in advance!
    Steve

    Hi,
    Thanks for the response, but I have a question:
    Installing SQL Express or SQL Server is not recommended on SBS
    2011 because it is a DC, however technically it will work.
    I'm a newbie when it comes to SBS 2011 and I'm taking a crash course on the subject. Can you explain to me what you mean by "DC"? Also, why
    isn't recommended to install a new instance on SBS 2011?
    As I also stated, I've added "New Rules" to the Windows Firewall to allow incoming connections on port 64719 for both TCP and UDP, and I also allowed incoming connections for SQLSERVR.EXE but no joy to connect to the SERVER1\MSQL8R2EDATA.
    And yes, I can log-in and connect locally on SERVER1 using Management Studio with success. I even used tcp:SERVER1\MSQL8R2EDATA with the same success. It's my workstation STEVE-PC that fails. If that fails, then the rest of the workstations are going to fail.
    Are you suggesting that I put the SQL Server 2008 Express on another workstation and just allow to to be
    accessed that way?

  • I have just dowloaded the icloud control panel on my PC and i am am able to see everything that has been pushed to icloud from my ipad. However i cannot see my email. i can send from the computer using icloud, but i do not see any mail that is being rec.

    i have just dowloaded the icloud control panel on my PC and i am am able to see everything that has been pushed to icloud from my ipad. However i cannot see my email. i can send from the computer using icloud, but i do not see any mail that is being received by my ipad, which is set up with my mail server. What haven't i checked lol?

    turn your ipad off by holding the sleep wake button for 5 seconds and slide to turn off then turn it back on and the apps should be finished and if the apps didnt finish just redownload them

  • I switched from an iPhone to a Galaxy s4.  Everything seems ok except text messaging with people who have an iPhone.  I can send them a text, they can see it, but I cannot see what they text back.  What can I do please?

    I just switched from an iPhone to a Galaxy 4S and I like it except for text messaging.  I can text, they can see it, but I cannot see their response if they are using an iPhone.  Can you help me with this?  What do I do please?

        Congratulations on your new phone kathdogg! Now let's get your messaging working correctly. If you still have your old device, turn it on, go to settings, and turn off iMessaging.
    If you are no longer in possession of your old device, you will need to remove your phone number from your Apple Support Profile. This can be done here: http://bit.ly/1cst2SC 
    Please keep us posted, and let us know if this resolves your issue!
    Thank you,
    MichelleH_VZW
    Follow us on Twitter @VZWSupport

  • Cannot see table in sql developer or sql plus

    I have created a record in application designer. I have then built the table. I can close the record and then find it again in application designer. But if I go to sql plus or sql developer, I cannot see it. Am I missing a step?

    You probably can see all the tables of sysadm because someone else give you proper grant for that on existing sysadm's objects.
    For the new or modified object (drop+create) you should :
    1. connect as sysadm and run
    grant select on new_table_name to your_own_user;2. connect with your own user and run
    create synonym new_table_name for sysadm.new_table_name;Then you'll be able to query that table without using schema name alias.
    Some admin have also a ddl trigger to make it automatically.
    You could also work through a role and public synonym if more than one user needs to access sysadm's objects.
    Nicolas.

  • I cannot see XMLType table in sql*plus

    Hi,
    Although I have wokred extensively with Oracle, I am new to Oracle XMLdb. My problem is I cannot see the XMLType tables created under my schema. I can see the tables when I do a select from user_xml_tables. But if I do a 'desc' or 'select from', I get ORA-04043 or ORA-00942. I can desc an XMLType table owned by xdb. I am using Oralce 10g. Please provide a solution asap as a customer is waiting on this.
    Thanks,
    Jayati Ray

    Raghu !!
    GREAT!!!
    It was a BUG in Oracle sql developer, I installed the new version v3.0, It WORKS like a CHARM.
    Thanks a million for your help!!!
    Cheers
    Tony

  • My  2012 Mini OS 10.7.5 cannot see the Ethernet connection to my Actiontec GT701 WG.  The Network Preferences says "cable unplugged".  The WiFi connection is working fine.  Please Thank You

    My  2012 Mini OS 10.7.5 cannot see the Ethernet connection to my Actiontec GT701 WG.  The Network Preferences says "cable unplugged".  The WiFi connection is working fine.  Please Thank You

    Never mind, problem solved.  When I retunred to the Network tab the message had changed to "connected, no IP address" so I got that from the WiFi tab and configured the Ethernet manually.  Have a nice day @:-)#

  • I cannot see my Hotmail saved messages on my iPad 4.  I do not have this problem on my iPad 2.  All settings look identical.

    I cannot see my Hotmail saved messages onmy iPad 4.  I do not have this problem on my iPad 2.  The settings appear identical.Any suggestions to cure the problem?  Thank you.

    My iPad 2 does exactly the same thing. But I just have to go on to my wifi options and you can either forget this network and then press it again or you can turn wifi off and on again and press that wifi.
    Kind regards,

  • On my Mac pro I cannot see my iTunes library in my slideshow as a music selection

    I cannot see my iTunes library in iPhoto to add music to a slideshow

    Hi Mary3400,
    I'm not sure which version of iPhoto you are using, but see if the troubleshooting in this article helps.
    iPhoto '11: Add music to a slideshow
    The top section explains how to, the second section is for if you don't see your iTunes library as a source.
    Best regards,
    Nubz

  • HP Envy 4500 - cannot see from my IPAD 4 gen, does not airprint

    Dear all,
    I hope you can help me. I cannot see my printer envy4500 from my IPAD 4 gen (IOS7.0.4). I've tried all, following also your instruction (reterived in this forum)to set a manual IP but it does not solve the problem. My router is wireless Belkin Surf N300 and it's on line, the printer is also on line in the same wireless network as also the IPAD. Only if I use the direct wireless I can see the printer, otherwise not. If I use the AiO remote APP I cannot see the printer when it's connected to the wireless network, I can only see when I use direct wireless. If I enter the printer IP address from browser when I am connected to the wireless network, I can see all data from printer, I can see also my router typing it's address. 
    Can some one help me?
    Thanks

    Hi zagar,
    Welcome to the HP Support Forums.  I understand that your iPad is not finding the printer unless it is connect by Wireless Direct. 
    I have included a link to another thread here on the forum addressing a similar issue.  As you read through the thread you will find several steps to try.  Please let me know if none of the steps correct the issue.
    HP Support Forums thread
    http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/airprint-from-iphone...
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

Maybe you are looking for