FCP capture & compatibility problems with JVC BR-HD50 deck

Please help.
I’m looking for someone who has shot w/ JVC GY-HD200 cameras, using JVC Pro HD MINI dv tape stock and uses a JVC BR-HD50 deck and edits on the most recent (6.03 update) version of FCP. Or some amazing, savvy whiz that has solved this problem.
I now know that Apple does not support the JVC BR-HD50 deck. However, Apple does support the JVC GY-HD200 camera.
I have more than 100 plus-hours of footage (shot on JVC proHD mini dv w/ 2 JVC GY-HD200 cam) that is begging to be digitized. I’m not going to ruin my heads by digitizing all this footage from the camera.
I need a straight answer boys…All I need to know is what deck to use…
Can someone please tell me what deck is compatible, is supported by Apple AND is available?
As far as I know there isn’t any” JVC HD deck that’s “currently available” AND “supported” my Mac.” Yes, I’ve been the mac page - Spoke w/ B&H and other outlets and the JVC 6000u is no longer available.
I spoke with a very patient FCP tech-support fellow & he suggested the JVC CJ VHI…or another FCP tech recommended the “no longer available 6000. These don’t work.
The bottom line is that my new deck doesn’t fully communicate w/ FCP. (TC issues) Having consulted many savvy FCP editors, IT pros specializing in video & mac, a smart & determined video guy from “B&H,” as well as the fine gentleman at Apple (never spoke to a woman) who are apparently FCP whizzes—I’ve gotten a lot of, “try this,” or “apple doesn’t support the br-hd50 deck or “it looks like your (brand new, custom loaded tower) doesn’t recognize any component that uses fire wire – you need to take it to an apple store.” Which was not true. My fire wire ports work just fine.
Perhaps Brandon or Jeff (the fantastic mac FCP support) or a few of the folks from JVC could chime in…Kunihiko Sato-san or anyone who is innovative, smart or perhaps wears a black turtleneck. Please only respond with proven results not theories… and “yes” I tried to load video without the latest FCP update, changed cables & tried all the troubleshooting techniques from the Apple FCP support staff. In addition, I “updated “my brand new” JVC deck - Hiromi Minakawa-san?
I’d greatly appreciate some help with this. I’m not a FCP, Mac or super-tech guru. Thank you!

Can you tell us exactly what the problem is? Is the computer not recognising the deck at all or is it importing broken clips with huge gaps? (the usual problem).
If you are using FCP 6 try bringing the footage in as ProRes. This usually brings in the footage with only a small number of frames missing from the beginning of each shot.
This camera is at it's best if you use the DR HD100 onboard hard drive, save yourself hours of digitising and keep the original tapes as archive / backup and no quality loss (or missing frames for that matter). I have clients who post produce themselves who use this camera purely for this feature.

Similar Messages

Compatibility problem with macro media flash active control

I am getting a message on my screen "compatibility problem with macro media flash active control, it isnt compatible with my version of windows (vista). How can this be fixed? why am I suddenly getting it now? I have the latest Adobe flash player installed.
Trisha

the latest flash is probably the problem... it's seems that the latest flash has been causing a boat load of issues. i did a system restore to undo the flash and mozilla upgrades and it's still crashing but not as bad as it was with the upgrades.

Is there compatibility problem with updating OS-X Lion to new Mountain Lion?

is there compatibility problem with updating OS-X Lion to new Mountain Lion?

http://www.apple.com/osx/specs/

SynTPEnh.exe x64 compatibility problem with Cakewalk SONAR X1c.

SynTPEnh.exe x64 compatibility problem with Cakewalk SONAR X1c.
Everytime when I use the middle key (of UltraNav, with blue dots) in the Step Sequencer (or other places, mostly) in Cakewalk SONAR X1c (x64) to try to scroll horizontally, both SONARSTD.exe and SynTPEnh.exe crashes down.
Operating System: Windows 7 SP1 x64
Model: Thinkpad T520 42425FC

Hello,
Can you tell us which version of the SynTPEnh.exe file is installed on your computer?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Yahoo mail tells me to upgrade Safari but I have the latest version of Safari 6.0.1 Is there a compatibility problem with Yahoo mail and Safari?

Yahoo mail tells me to upgrade Safari but I already have the lastest version of Safari. Is there a compatability problem with the Safari 6.0.1 and the latest version of Yahoo mail?

Since Yahoo is web based email, the compatbility issue is on the Yahoo side, not Apple.
You can access your Yahoo account without having to use Safari.
Open the Mac Mail app. From the menu bar click Mail > Preferences then select the Accounts tab then the Account Information tab.
Click + to add your Yahoo account.

EOS 7D Mark II - Has anyone else experienced compatibility problems with the Tamron SP 70-300MM?

Has anyone else experienced compatibility problems with the Tamron SP 70-300MM?

Is the lensora report based on actual testing... or merely theoretical?
I'm wondering ... because there's a well-established history of 3rd party lenses that should be compatible based on the mount, but have problems anyway when a new camera model is introduced that did not exist when the lens was designed.
At the same time, if you contact the lens vendor for support, they may be able to provide better data and sometimes they can re-chip or re-flash firmware into the lens to upgrade it to a compatible state.
Tim Campbell
5D II, 5D III, 60Da

Log & Capture problem with JVC GY100 HD, please help!

Hi guys,
I'm trying to Log & Capture using JVC GY100HD on FCP HD which was shot on 1080i HD. FCP HD won't recognize the camera. It's all hooked up correctly.
Can someone please help me with the Settings & Preferences to get this to recognize?
Thanks in advance,
ZIA

The camera cannot shoot 1080i material; it only shoots 720p. It can however play back 1080i material. The footnote is a little misleading. What they're trying to say is that FCP does not support the JVC's 720p25 or 720p24 formats.
What shot the 1080i material? A Sony? Try using the standard Sony HDV 1080i preset, but don't use the Sony HDV device control preset. Make sure the camera is set in the correct output mode before launching the application.

Final Cut Pro 5 not working with JVC BR-HD50/HD-100U

The footage was shot in 720/30p on the HD-100U which is supposed to work with FCP5. I am using the HD50 deck. I can log the footage but only see black going to the Log & Capture window. I have checked all the settings on the deck and in FCP with no luck. I did get it to capture 853x480 footage that was uncontrollable. FCP does not recognize it on the timeline but does in the viewer. Any suggestions?

welcome to the forum!
You'll get good advice here and it's worth a visit even if you don't have a problem - you'll learn a lot from reading the posts.
This is a good workaround for curing your camera recognition problem:
First, check that your Easy Setup / Timeline / Camera or Deck Settings are all exactly the same, then making sure your camera or deck is in VTR mode, try to capture again.
FCP uses a different form of QT than iMovie for capturing, so if the camera works in iMovie (or if it's listed in System Profiler) but not FCP, it obviously means your Mac can see the VTR but FCP can't, so you need to do this QuickTime fix.
http://docs.info.apple.com/article.html?artnum=301852
Follow the instructions carefully and you should have things running in no time but note that if you have QT Pro, you’ll have to re-purchase it.
If the Camera / Deck isn't recognised by iMovie or System Profiler, try resetting the Firewire Bus . . . Turn off the Mac and disconnect the power and all Firewire cables. Leave it for 30 mins then connect back up.
Still not working? Try a different Firewire cable.
Failing all this, try resetting the PMU (Power Management Unit). The method varies from machine to machine, so visit the Apple site and search for it in support.
Don't use iMovie for capturing - it doesn't give you a timecode and that's very important.
Let us know how you get on!
Andy
G5 Quad 8GB. 250+500 GB HDs. G-Raid 1TB. FCP 5.1.1. Shake 4.1. Sony HVR Z1E Mac OS X (10.4.7)
"I've taught you all I know, and still you know nothing".

FCP Capture Dropped frames with advanced pulldown

Ok so here's my problem, I have Final Cut studio with FCP 4.5 and I'm trying to import 24p advanced pulldown media from my tapes, and getting a dropped frames warning that ends import; but after trying both cameras (the one the footage was shot with and a second one) and different tapes with normal footage and 24P advanced I still get the same error message. Then I went and replaced the firewire cable with no luck, and I just went and got a PCI firewire card qualified for video import same dropped frames.
Now before I put in the PCI card I clean installed FCP studio with no luck, I also went through and triple checked every setting in FCP for any problems; and I'm wondering if it might mean that either, I need to replace the media drive I'm importing to or if I need more then my 1GB of RAM?

I too am having the exact same problem with 4.5 (although no advanced pull down) and 24p. Last week I was importing fine, this week, dropped frames right and left using batch capture after logging my clips.
I'm using a dual 2.0ghz G5 with 3.5gb of RAM, 10.4.9, booting off a 250gb internal (48gb free) disk but using a G-Tech 500gb firewire 800 external firewire drive for scratch(400gb free). Media is miniDV, tape deck is Sony GVD1000 and I've tried my DVX100b for playback as a test. I've gone thru the FCP checklist and used Disk Utility and Disk Warrior (no problems there). I've tried different tapes (including ones that were successfully captured last week).
I'm suspecting that some recent download of QTime, OSX, or iTunes is at fault. Anyone else suspect the same?

Any Sony HX9V dig camera compatability problems with imac?

Hi Anyone aware of compatability problems between the new Sony HX9V dig camera and my Mac before I buy
Cheers Vernon

I don't see any problems.
1. Images
When you connect the camera to your Mac you can copy the JPG images from one of the appearing camera folders to your hard drive.
2. Movies
There is a (little!) problem with best quality movies US format 1080/60p / EU format 1080/50p. These can't be imported directly. (I'm using FCP X.)
But you can use the free Media Converter (http://media-converter.sourceforge.net)* with the free Re-wrap AVCHD plugin (same website) to convert the available MTS files into QuickTime MOV files (1080/60p) which can be imported into FCP X. (Before I import my movies I trim them using QT X.)
(Note: I assume in iMovie you can only use them as 1080/30p (losing every other frame). I'm not 100% sure - I made a test some months ago.)
*) You can also use ClipWrap ($50) but I can't see a difference.

Player compatibility problem with dual layer media

I've created a dual layer DVD and there is a problem with compatibility from player to player.
It plays fine in one of my DVD players but will not load in the other.
The duplicators tested my master on 2 players and it loaded on both, but would lock up if a chapter was selected from the submenu.
It has 4 tracks of content. 3 menus, and a bunch of chapter markers. The original build had stories (replaced with standard chapter markers) but I removed them hoping it would solve the problem.
The imported video tracks were created with Compressor. MPEG-2 2 pass VBR max bit rate 7.5. AC3 audio tracks. 7.7 GB on disc.
I'm already way over my deadline and ahve no idea what to do next other than maybe recompress so the disc is not so close to being maxed out.

Thats just how compatible that media is... +R DL (double layer) & -R DL are not that compatible. Recordable media is less compatible that replicated discs but double and dual layer media can be 50% compatible at best (depending on your target market...)
Good quality media, Verbatim +R DL for example burnt at slow speeds helps improve things,
-Jake

Plug-in 5.8.0 Compatibility Problem with Pr 8.2

Hi Guys
I'm running Win7, SP1 with a NVidia Quadro FX 3800 card. Is it me or is CC2014 a bug laden step backwards?
Apart from the serious CUDA issue users are facing, since a couple of updates ago I get a compatibility problem. Whenever I try to launch Audition or AE (or even SmartSounds) from an open Pr project, I get an error message saying "Premiere Pro version 8.2 is not compatible with Premiere Pro Plug-in version 5.8.0." The issue first appeared in 8.1.
Has anyone else faced this issue and how can I resolve it (before I throw in the towel and go back to CS5!?)
Regards,
Graham

Thanks, Ann. I hadn't realised there was a 5.8.1 update, which seems to have solved the problem (I thought it was something deeper as the error appeared when I tried to open AE through the DL.

Compatibility problem with Portege 7020 / 7200 CT display & docking station

Hi guys,
i am experiencing some problems with the 2 mentioned laptops.
The 1st one is:
I bought a used 7020 to replace the broken screen of 7200. After disassembled the screen, I noticed that the connectors have the same number of wires, but one of the terminal of the 7200's screen has a larger socket. "no problem" I thought, and with patience I picked up the cable of the 7020 adapter an put it into the 7200.
But when i turned it on i saw only colored lines and squares :S :S
If you want i can provide the PN, if it could help...Even if i check the compatibility before order.
2nd problem:
Portege 7200 recognize correctly the docking station, while the 7020 emit some beeps before boot, and obviously it doesn't work with him. I checked on toshiba's site and the dock would be totally compatible!
And for last... Where can i find bios updates?
Sorry for my bad english, i hope that someone could help me!
regards,
Francesco

Hello Francesco
You will be really lucky if anyone here can help you with these old notebook models. I am pretty sure they are about 10 years old.
Without maintenance manuals and enough knowledge is not easy to help you with this display replacement.
This issue with docking station can be related to defective hardware. Both notebooks are so similar and both of them can be used with this docking station. How you can be sure hardware is top on 7020?
BIOS updates are available on http://eu.computers.toshiba-europe.com/innovation/download_bios.jsp but as I can see for Portege 7000 there is no BIOS update, just for 7020.
If you want you can contact nearest Toshiba service provider. they have maintenance manuals for this old notebooks and they can help you offering exact info about parts you need.

MSI GTX 660 OC compatibility problem with MB

I recently got the MSI GeForce GTX 660 OC TwinFrozr III 2GB DDR5 192-bit and Gigabyte GA-B75-D3V.
Problem is: when I start the computer, the monitor doesn't show anything, it's like it's on stand-by. I then connected the GTX 660 to another computer with a pci-e 2.0 motherboard and worked fine (didn't install drivers, just started the computer and saw that it shows stuff on the monitor). I then connected another GPU (Gigabyte GT 420) to my new pc and worked fine aswell (showed stuff on the monitor).
My question is: is there a compatibility problem between the gpu and the motherboard? Do I need to make a bios upgrade?
Thank you for your help!

VGA S/N?
also save current vbios with nvflash http://www.techpowerup.com/downloads/2133/NVFlash_5.118_for_Windows.html
nvflash -b myrom.rom [ENTER]
then upload myrom.rom somewhere and give a link to it

Browser compatibility problem with t:selectOneMenu and JavaScript calendar

I'm having problem with <t:selectOneMenu> and JavaScript calendar on IE. It works fine on Firefox but doesn't work on IE.
The JSF code is as follows:
<tr>
                                   <td align="right">
                                        Archive Date
                                   </td>
                                   <td align="left" colspan="3">
                                   <table cellpadding="0" cellspacing="0" border="0">
                                   <tr>
                                   <td>
                                   <span class="tuny_text">After (Ex. Oct 18, 2007)</span>
                                        <h:outputLabel for="txtArchiveDateAfter" value="Archive Date After" rendered="false"/>
                                        <br/>
                                        <t:inputText required="false" value="#{nonItemImageSearchPage.stringArchiveDateAfter}" name="txtArchiveDateAfter" id="txtArchiveDateAfter" forceId="true" styleClass="inp" style="width: 128px">
                                   </t:inputText>
                                        <t:graphicImage value="/images/calendar.png" id="dtpArchiveDateAfter" name="dtpArchiveDateAfter" forceId="true" style="border: 2px solid #EEE; cursor: pointer"></t:graphicImage>
                                        <br/>
                                        <t:message for="txtArchiveDateAfter" styleClass="form_error" replaceIdWithLabel="true"></t:message>
                                   </td>
                                   <td>
                                   <span class="tuny_text">Before (Ex. Oct 18, 2007)</span>
                                        <h:outputLabel for="txtArchiveDateBefore" value="Archive Date Before" rendered="false"/>
                                        <br/>
                                        <t:inputText value="#{nonItemImageSearchPage.stringArchiveDateBefore}" name="txtArchiveDateBefore" id="txtArchiveDateBefore" forceId="true" style="width:128px" styleClass="inp">
                                   </t:inputText>
                                        <t:graphicImage value="/images/calendar.png" id="dtpArchiveDateBefore" name="dtpArchiveDateBefore" forceId="true" style="border: 2px solid #EEE; cursor: pointer"></t:graphicImage>
                                        <br/>
                                        <t:message for="txtArchiveDateBefore" styleClass="form_error" replaceIdWithLabel="true"></t:message>
                                   </td>
                                   </tr>
                                   </table>
                                   </td>
                              </tr>
                              <tr>
                                   <td align="right" >
                                        <h:outputLabel for="drpBackground" value="Background"/>
                                   </td>
                                   <td align="left" class="right_separator">
                                        <t:selectOneMenu id="drpBackground" forceId="true" value="#{nonItemImageSearchPage.nonItemImageSearchModel.backgroundId}" styleClass="inp" style="width: 150px">
                                        <f:selectItem itemLabel="--------" itemValue="-1"/>
                                        <s:selectItems value="#{nonItemImageSearchPage.backgroundPrefsList}"
                                                  var="backgroundPrefs" itemValue="#{backgroundPrefs.id}" itemLabel="#{backgroundPrefs.description}" />
                                        </t:selectOneMenu>
                                   </td>
                                   <td align="right" class="left_separator">
                                        <h:outputLabel for="drpTheme" value="Theme"/>
                                   </td>
                                   <td align="left" >
                                        <t:selectOneMenu id="drpTheme" forceId="true" value="#{nonItemImageSearchPage.nonItemImageSearchModel.themeId}" styleClass="inp WCHhider" style="width:150px;">
                                        <f:selectItem itemLabel="--------" itemValue="-1"/>
                                             <s:selectItems value="#{nonItemImageSearchPage.themePrefsList}"
                                                  var="themePrefs" itemValue="#{themePrefs.id}" itemLabel="#{themePrefs.description}" />
                                        </t:selectOneMenu>
                                   </td>
                              </tr>
                              <tr>
                                   <td align="right" >
                                        <h:outputLabel for="drpSeason" value="Season"/>
                                   </td>
                                   <td align="left" class="right_separator">
                                        <t:selectOneMenu id="drpSeason" forceId="true" value="#{nonItemImageSearchPage.nonItemImageSearchModel.seasonId}" styleClass="inp" style="width:150px">
                                        <f:selectItem itemLabel="--------" itemValue="-1"/>
                                             <s:selectItems value="#{nonItemImageSearchPage.seasonPrefsList}"
                                                  var="seasonPrefs" itemValue="#{seasonPrefs.id}" itemLabel="#{seasonPrefs.description}" />
                                        </t:selectOneMenu>
                                   </td>
                                   <td align="right" class="left_separator">
                                        <h:outputLabel for="drpClothing" value="Clothing"/>
                                   </td>
                                   <td align="left" >
                                        <t:selectOneMenu id="drpClothing" forceId="true" value="#{nonItemImageSearchPage.nonItemImageSearchModel.clothingId}" styleClass="inp" style="width:150px">
                                        <f:selectItem itemLabel="--------" itemValue="-1"/>
                                             <s:selectItems value="#{nonItemImageSearchPage.clothingPrefsList}"
                                                  var="clothingPrefs" itemValue="#{clothingPrefs.id}" itemLabel="#{clothingPrefs.description}" />
                                        </t:selectOneMenu>
                                   </td>
                              </tr>
                              <tr>
                                   <td align="right" >
                                        <h:outputLabel for="drpToy" value="Toy"/>
                                   </td>
                                   <td align="left" class="right_separator">
                                        <t:selectOneMenu id="drpToy" forceId="true" value="#{nonItemImageSearchPage.nonItemImageSearchModel.toyId}" styleClass="inp" style="width:150px">
                                        <f:selectItem itemLabel="--------" itemValue="-1"/>
                                             <s:selectItems value="#{nonItemImageSearchPage.toyPrefsList}"
                                                  var="toyPrefs" itemValue="#{toyPrefs.id}" itemLabel="#{toyPrefs.description}" />
                                        </t:selectOneMenu>
                                   </td>
                                   <td align="right" class="left_separator">
                                        <h:outputLabel for="drpJuvenile" value="Juvenile"/>
                                   </td>
                                   <td align="left" >
                                        <t:selectOneMenu id="drpJuvenile" forceId="true" value="#{nonItemImageSearchPage.nonItemImageSearchModel.juvenileId}" styleClass="inp" style="width:150px">
                                        <f:selectItem itemLabel="--------" itemValue="-1"/>
                                             <s:selectItems value="#{nonItemImageSearchPage.juvenilePrefsList}"
                                                  var="juvenilePrefs" itemValue="#{juvenilePrefs.id}" itemLabel="#{juvenilePrefs.description}" />
                                        </t:selectOneMenu>
                                   </td>
                              </tr>
                              <tr>
                                   <td align="right">
                                        <h:outputLabel for="drpGroup" value="Grouping"/>
                                   </td>
                                   <td align="left" class="right_separator">
                                        <t:selectOneMenu id="drpGroup" forceId="true" value="#{nonItemImageSearchPage.nonItemImageSearchModel.modelGroupingId}" styleClass="inp" style="width:150px;">
                                        <f:selectItem itemLabel="--------" itemValue="-1"/>
                                             <s:selectItems value="#{nonItemImageSearchPage.groupPrefsList}"
                                                  var="groupPrefs" itemValue="#{groupPrefs.id}" itemLabel="#{groupPrefs.description}" />
                                        </t:selectOneMenu>
                                   </td>
                                   <td class="left_separator"> </td>
                                   <td> </td>
                              </tr>
The JavaScript code is as follows:
<script type="text/javascript" language="javascript">
     var dtpArchiveDateBefore = new MooCal("txtArchiveDateBefore");
     var dtpArchiveDateAfter = new MooCal("txtArchiveDateAfter");
     window.addEvent("domready", function(){
     $("dtpArchiveDateBefore").addEvent("click", function(e){
                var event = new Event(e).stop();
                  var x = (event.client.x)-150;
                  var y = event.client.y;
                  dtpArchiveDateBefore.show(x,y); // Display the calendar at the position of the mouse cursor
                  dtpArchiveDateBefore.minYear = 1800;
                    dtpArchiveDateBefore.maxYear = 2017;
     /*$("txtArchiveDateBefore").addEvent("click", function(e){
             e.target.blur();
                var event = new Event(e).stop();
                  var x = (event.client.x)-150;
                  var y = event.client.y;
                  dtpArchiveDateBefore.show(x,y); // Display the calendar at the position of the mouse cursor
                  dtpArchiveDateBefore.minYear = 1800;
                    dtpArchiveDateBefore.maxYear = 2017;
    $("dtpArchiveDateAfter").addEvent("click", function(e){
                var event = new Event(e).stop();
                  var x = (event.client.x)-150;
                  var y = event.client.y;
                  dtpArchiveDateAfter.show(x,y); // Display the calendar at the position of the mouse cursor
                  dtpArchiveDateAfter.minYear = 1800;
                    dtpArchiveDateAfter.maxYear = 2017;
   /* $("txtArchiveDateAfter").addEvent("click", function(e){
             e.target.blur();
                var event = new Event(e).stop();
                  var x = (event.client.x)-150;
                  var y = event.client.y;
                  dtpArchiveDateAfter.show(x,y); // Display the calendar at the position of the mouse cursor
                  dtpArchiveDateAfter.minYear = 1800;
                    dtpArchiveDateAfter.maxYear = 2017;
     </script>When the calendar is above t:selectOneMenu, it doesn't show up on t:selectOneMenu area. Could anyone help me solve the issue?
Thanks
Rashed

There are dozens of CSS attributes that can (and have to) be handwritten. Trouble with them is that, like text shadows, they don't appear in all browsers. I have nine different browsers installed and test pages in ALL of them before I "finish" building site or page for a template.
I try to build for Firefox, out of personal preference for it, but I have to do things that work with IE because it still holds the market share (46%IE to 42%FF), and I will only go with designs that work in IE, FF, NS, Opera, Safari, and Chrome.
As to your questions.
1. The compatibility check is most likely current with the time of the build. I don't know if that component updates as browsers do, but I'd tend to think it doesn't. I'm using CS4 and there haven't been any updates for it in nearly a year. Firefox has released 4.0, Opera released 11, and Safari released 5 since then. The updater would have found and downloaded something if it was available.
2. I could only guess. Text shadows DON'T show up in design view (or in IE) but they do in browser preview. It's just a UI quirk, and it means "trial and error" is the onyl way to get what you want.
3. The quick-selects which are in DW dropdowns or popouts are the ones most common to CSS designs and have been proven to work with all browsers at the time of release of your particular build of DW.
Hope that helps..

*FCP capture & compatibility problems with JVC BR-HD50 deck*

Similar Messages

Maybe you are looking for

FCP capture & compatibility problems with JVC BR-HD50 deck