Fcp - color - fcp ALL BLURRY in PAL Anamorphic - any ideas?

ok, so admittedly i'm not working on my normal system but i've been using color (and final touch before that) for a while on a number of small and large fcp projects (dv, hdv, prores) and now i'm working on a small tv show for austrian broadcasting.
naturally the project is in pal and it is in standard pal anamorphic.
when i send to color everything looks ok, my viewer is squeezed (there is no pal anamorphic setting for color it seems, just regular pal 4x3) but checking the geometry it all looks good so i wasn't concerned.
i do a correct on a 2-minute section to test everything and it all looks good in color.
i render everything out and send it back to fcp and lo and behold EVERYTHING is BLURRY.
as if a defocus filter has been applied.
i've tried a bunch of different settings, i've removed grades, de-interlace, everything and it still comes back blurry.
any ideas?
thanks,
nick.

FCP issue?
Check the rendered clips OUTSIDE of FCP, ie in Quicktime. There may be a scaling/RTE/proxy thing happening if there is not an exact match between the rendered material and the way FCP wants to handle it. Check Audio/Video settings. The anamorphic nature may be throwing a curve.
jPo

Similar Messages

Everytime I export from FCP using comressor I am lose my audio, any ideas as to why this is happening. Or do I have somthing turned off and I am just missing it? Dual 2.7 Ghz PowerPC G5 1.5 GB DDR SDRAM, Mac OS X (10.4.6)

Everytime I export from FCP using comressor I am lose my audio, any ideas as to why this is happening. Or do I have somthing turned off and I am just missing it? Dual 2.7 Ghz PowerPC G5 1.5 GB DDR SDRAM, Mac OS X (10.4.6)

Exporting via Compressor may be recommended but it is slow and doesn't fully support all available filters, etc.
Try exporting the timeline as a QT Movie (the "normal" export) using Current Settings and them submit the resultant clip to Compression. Works for me...

My ipad was taking really clear photos but now they are blurry and grainy. Any ideas why?

My ipad was taking really clear photos but now they are blurry and grainy. Any ideas why?

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Why is my internet search page gray? I am able to search a topic, but the 'results' part of the screen is a medium gray color and it won't respond. Any ideas?

Why is my internet search page gray? I am able to search a topic, but the 'results' part of the screen is a medium gray color and it won't respond. Any ideas?

Try clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

I cant get into itunes producer keep getting an error my username and password is incorrect. i have made a new one all good still same error any ideas?

I cant get into itunes producer keep getting an error my username and password is incorrect. i have made a new one all good still same error any ideas?

I'm having a very similar problem.
I'm based in the U.K. and am trying to publish an iBook through the iTunes bookstore. I have made my book in iBooks author 2.0. My iTunes is up to date.
When I try and publish the iBook I have passed and ticked the Pre Publish Check; and the Create Account, but when I try and download iTunes Producer through iTunes Connect I'm told "Your Apple ID does not have permission to access iTunes Content."
When I try and re-set my iTunes Store account I'm told "The iTunes Store Account has already applied to distribute content on the iBookstore." Of course it has I just did that.
If I try and sign in to iTunes Connect through the Publishing pane I'm told "Your ID or Password was entered incorrectly." Even though I've just used it to sign into iTunes (and here), so my password and Apple ID work fine elsewhere.
Is my access to the iTunes Connect being delayed while my submission is processed, i.e. the processing of my tax and account details? Or am I stuck in a loop?
If this is still processing (I started this 20 hours ago) I assume that I have to submit the book itself when I can download iTunes Producer at a later date, as I haven't submitted the book yet?
I emailed the problem to iTunes Store and was refered to [email protected], only for them to say they don't read or reply to emails sent to that address??????
I'm not sure which part of the process I've reached - if any. I feel I'm in limbo. I have an iBook ready to go - but where is Apple?
Any help would be most welcome.
Andy

Got to end of trial period for Adobe reader XI and cannot revert back to old version or install another version b/c it says I have a newer more functional version, so now I've got no reader at all and cannot fix. Any ideas how to overcome this?.

Got to end of trial period for Adobe reader XI and cannot revert back to old version or install another version b/c it says I have a newer more functional version, so now I've got no reader at all and cannot fix. Any ideas how to overcome this?.

YOu need to be clear about the products you are using, so we can help you. In particular there is no trial of Adobe Reader, it is free and keeps running. Sounds like you are using some versions of Acrobat - which?
YOu must properly uninstall the trial, don't just delete files or you may get a mess impossible to recover.

Hi, When I try to sync my iphone not all the music in my itunes library syncs successfuly even though I have a lot of space left and I have the 'sync all music' option selected. Any idea? Thanks

Hi, When I try to sync my iphone not all the music in my itunes library syncs successfuly even though I have a lot of space left and I have the 'sync all music' option selected. Any idea? Thanks

While you're correct in that Windows media won't sync to the iPhone (or any i-device), the OP states that all the music is in iTunes. If its in iTunes, it would no longer be in Windows media format since it would have been transcoded to whatever the user sets as their import preference (AAC, mp3, etc.), and once that is done then the media should be able to sync to the iPhone just fine.
To Steph, do the missing songs play OK in iTunes? If not then they could be corrupted in some way. If they play fine in iTunes but don't sync, are they unchecked in iTunes? They won't sync to your iPhone if it is set to ignore unchecked items. Finally, if these are iTunes purchases, are they protected format? (i.e. m4p files) If so, is your computer authorized to play them? (you'd know if you try to play them in iTunes, it would prompt you for the account password if not authorized)

HT201210 My Ipod has an error code of 1604 when trying to restore. I have followed all recommended instructions...any ideas.??

My Ipod has an error code of 1604 when trying to restore. I have followed all recommended instructions...any ideas.??

If you did all of this
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

My phone's speakers only work sometimes. Sometimes it is better when I plug in my headphones, but not all of the time. Any idea's?

My phone's speakers only work sometimes. It started recently, and I just moved to Hawaii so I am at the beach alot. Could sand have something to do with this? Sometimes it is better when I plug in my headphones, but not all of the time. Any idea's?

cmhatch93 wrote:
I just moved to Hawaii so I am at the beach alot. Could sand have something to do with this?
Absolutely!
If you are taking your $500 electronic device to the beach, I recommend you get a case that completely seals the iPhone from the elements (ie. waterproof).
-> http://reviews.cnet.com/8301-19512_7-57587098-233/top-waterproof-iphone-5-and-ip hone-4-4s-cases/

I deleted duplicate files with MacKeeper and now my firefox only shows text. I have reinstalled firefox, java, and checked all of my settings. Any ideas? Safari works fine.

I deleted duplicate files with MacKeeper and now my firefox only shows text. I have reinstalled firefox, java, and checked all of my settings. Any ideas? Safari works fine.

I opened iCal back up, all the dates were blank, so i started to type events into a date.
As soon as I started to double click a date to type an event, magically all the events in all the months reappeared.
I'm still puzzled why it acted this way and if I did delete something that caused it to act this way.

I had my 4S activated at the store, but when I got home to sync up my phone and get all of my contacts, nothing is happening. I backed up my 3GS before switching phones, so it's all on my computer. Any ideas?

I had my 4S activated at the store, but when I got home to sync up my phone and get all of my contacts, nothing is happening. I backed up my 3GS before switching phones, so it's all on my computer. Any ideas?

Launch iTunes. From the menu bar click Store / View My Account
Click: Edit Payment Information
Make sure you have the correct Security Code.
Then click: Done
And try resetting your Apple ID password. https://iforgot.apple.com/cgi-bin/WebObjects/DSiForgot.woa/wa

I have a generation 3 ipod 80 gig. When I updated itunes to 11.1.11 and tried to sync the ipod it erased it and now wont recognize it. I can't seem to make this work I have reset the ipod, reloaded itunes all to no effect. Any ideas?

I have a generation 3 ipod 80 gig. When I updated itunes to 11.1.11 and tried to sync the ipod it erased it and now wont recognize it. I can't seem to make this work I have reset the ipod, reloaded itunes all to no effect. Any ideas?

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

Lost all my pictures in Aperture, any idea where they're hiding?

Any ideas on how to find missing pictures on my Imac in Aperture?

What system, what OS and what version of Aperture? How many disks are on the system? Is the library on the internal or an external disk?
Make sure all external disks are attached, turned on and mounted then:
Open Aperture. Select File->Switch to Library->Other/New
A window will open in which Aperture will list all the libraries it finds on the disks attached to the system. While it is searching a spinning disk will appear at the bottom of the window. Let it run until that stops.
Look in the list, are other libraries listed? Is one possibly the one with the missing images?

HT5622 iPad 3 and my sound has stopped from speakers, but can get from headphones. It's not the side switch and the volume is max in all areas. Anyone got any ideas, what problem is and how to fix it thanks

Hi,
My iPad has just stopped working with sound from the speakers, it works fine with the headphones in. The soft mute button is not made and the volume is at max.
Any ideas what problem is and how to sort. Thanks

System sounds can be muted from the software switch in the task bar as well as from the side switch depending on how you have it set up. This my boilerplate resonse for sound issues.
1. If you have no sound at all, even in the Music App, try rebooting the iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
2. If you lost sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085
3. If you still have no sound at all - except when using headphones ....try cleaning the dock connector opening of the iPad with a soft brush and just a little bit of rubbing alcohol.

Upgraded to BBM 7.0 and LOST all my open chats. Any ideas?

Hi everybody! Hi Dr. Nick!
You can never go wrong with a good Simpson's reference...
I'm a sucker for updating everything when asked. When my Blackberry Torch 9800 asked me if I wanted to upgrade to the new BBM 7.0 in early December I thought, hey why not? After about a couple of hours and a reboot it was installed but when I opened up BBM all of my open chats (I never end a chat, does anybody?) vanished and I don't have a history of anything from anybody prior to December. I know people have reported that they have lost all of their contacts when they upgraded - I'm the complete opposite. I have all my bbm contacts but I lost all of my chat history. Some pretty important stuff to me. Any idea how to get this back or just a simple reason as to why??? Save chat history has never been changed from "never". Anybody in the same boat as me?
Help me Dr. Zaius! <--- Simpsons reference #2

Hi TJD2012,
Check the below Kb article on saving chat history -
KB18406 BlackBerry Messenger conversations are lost following an application load process of a BlackBerry smartphone
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Fcp - color - fcp ALL BLURRY in PAL Anamorphic - any ideas?

Similar Messages

Maybe you are looking for