FCP Crashes When Rendering or Converting Project

I have FCP Studio Academic. I have finished a project that is 2 hours and 20 minutes plus. I put several sequences together that are quite lengthy. I couldn't get it to convert using converter, or quicktime, because FCP would crash in converter shortly after it began. In quicktime, it would consistently reach the 80% mark and then crash. So I went to the 115th minute, and nothing was visibly distinct that would make me think that it was a problem.
So I deleted all the preferences stuff that the website tells you to, and nothing happened. I then deleted all of the rendered stuff, so I would have to re-render everything. Lo and behold, I couldn't render the individual sequences by themselves. I can't seem to get this to work, can anyone help??

In addition to the previous post,
subdividing the sequences to render did work. However, I tried to go back to the master sequence and render it, and I got the same result: FCP crashed.
I know that I can go through and subdivide all the sequences to render them and that will work to get them rendered, but I need to convert the project into a file so that I can put it on a disk.
Any Suggestions?

Similar Messages

FCP Crashes when rendering or adjusting attributes of clip

For some reason Final Cut Pro 5 (latest version) crashes whenever I render a specific project. I tried doing a "save as.." and making a new fcp file, but the problem still persists in the project. Any suggestions would be greatly appreciated.
PS: I tried FCP rescue and OnyX, with no luck.

hmm..I don't see why ram should cause Final Cut Pro to crash. When I import one of the .psd files in my project into new project if I double click on it, then FCP crashes! Here is a link to the project file:
http://salsunproductions.sitesled.com/video/ACMVIDEO/ACMPROMO4-fc3.fcp
I realize that you won't have the media files or some of the plug-ins (TMTS), but I would appreciated it if someone could see if it crashes for you. (highlight everything and under render selection check all of the colors, then hit command + r to begin rendering everything).

FCP Crashes when rendering long clips

When I have a 5-10 min project and want to render the whole thing my FCp will crash or stop rendering and give me an out of memory error. Is there something on Macs I need to do to get rid of this issue? Is there any type of maintenance I need to do on macs to clear make the app run better/faster?

50GB out of how much total? You should leave 15% free on that drive to maximize performance.
Try this:
#44: FCP acting weird - Trash Prefs
Shane's Stock Answer #44: FCP acting weird or unusual. Just not like is normally should
If the program was working fine, and now isn't, or just isn't working the way it should, the first things to do are:
1) Trash your FCP preferences. Download the Preference Manager from Digital Rebellion: http://www.digitalrebellion.com/pref_man.htm
http://www.kenstone.net/fcphomepage/trashing_fcpprefs.html
2) Open the Disk Utility and Repair Permissions.
3) Shut down for 10 min. Go for a quick walk around the block and get SOME exercise today. Come back, turn on the computer and see how things are.
4) (optional) Do the Hokey Pokey and turn your self about. Results may vary.
Shane

FCP 5.0.4 freezes when rendering or converting to quicktime on my macbookpr

FCP 5.0.4 freezes when rendering or converting to quicktime on my intel macbookpro. It really is very bothersome because I can't complete projects without rendering. I recently was just told that we should not download any updates at all for any appliction unless it is absolutely neccessary. Is there any truth to this. Would I be better off doing a complete erase and install to get rid of all updates that I have installed. My mac book is a 2.4 ghz with 2 gigs of ram, 200 gb hd, and 512 of vram. Help! My dead line is approaching.

What you've heard about Academic versions is correct. They are not upgradable.
If you want to run a version of FCP that is compatible, you have two options.
1. purchase a used PPC computer (G4/G5) and run your version of FCP 5 on it.
or
2. purchase a version of FCP designed to work on intel processors (v5.1 or higher).
#2 can be satisfied by purchasing a used version of 5.1 (full retail install) on ebay. Alternatively, if you qualify for academic pricing, FCS3 can be had for around $900 rather than the $1300 for the retail version.
On another subject, the MacBook is hardly the ideal editing platform no matter what version of FCP you are running ...
x

Crashes when rendering /Realtek drivr problem

hi,
love 6.5 then 7 but Pro is driving me potty... My system keeps crashing when rendering and also - or maybe becaused of?! - I keep getting 'can't playback audio / audio inputs are deactivated / adobe default sound drivers are in half duplex mode'. Are these problems linked? I've built up a large project - if I reinstall Pro will I lose it? I know I can't open it in 7.0 - pity! All help appreciated thankyou.
Ps ram is not a problem. I'm on vista.

Try this:
Support:kb402308 Realtek HD Audio
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

AE CS4 crashes when rendering

Since the last update to version 9.0.3.8 dva 2.0.0.161039 crashes when rendering.

I have AE 9.0.3, using a windows Intel Core i7-2600 Processor (8M Cache, 3.40 GHz) 4GB RAM.
It a very simple project, with version 9.0.2 to and are already' succeeded in renderind and after the upgrade to 9.0.3 fails more to do, after a good start and fast after a while begins to slow down until total blockade.
Sorry but I do not speak English and it's difficult to explain. Do you understand Italian?

Speed Grade Crashes when rendering

SpeedGrade crashes on me when I try to render graded footage to an h.264 file. I have tried both mts footage from the canon xh-a1 that has been converted to quicktime as well as footage straight out of the 5D Mark 2. I can grade the footage, but every time I try to render the footage I get, 100% render completion and then SpeedGrade crashes. Also no file is ever created from the output. Very Frustrating. Any thoughts on what could be the problem.
Thanks

I have been using the English version and It crashes all the same.
Date: Tue, 29 May 2012 09:33:59 -0600
From: [email protected]
To: [email protected]
Subject: Speed Grade Crashes when rendering
    Re: Speed Grade Crashes when rendering
    created by Dennis Weinmann in SpeedGrade - View the full discussion
Thank you for sending the crash report. This is a known issue and only affects Italian builds. We have isolated this and working on a fix. Please stay tuned and use an English version of SpeedGrade in the meantime. Thanks
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4447743#4447743
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4447743#4447743. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in SpeedGrade by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

PremeierePro CC crash when rendering - not enough memory

I´m on working with a 90 minute project and when trying to render PP CC crash.
PremeierePro CC crash when rendering. It says not enough memory. I´m on a MacBookPro Retina:
Processor 2.8 GHz Intel Core i7
Memory 16 GB 1600 MHz DDR3
Graphics Intel HD Graphics 4000 1024 MB
Software OS X 10.9.1 (13B42)

Kevin said "Update the drivers for both your video cards" so it seems he knows more than I do about Mac's
Read below about some problems/fixes for dual cards
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2

My new iMac with FCPX crashes when rendering complex templates and crashes when exporting with Motion 5

My new iMac with FCPX crashes when rendering complex templates and crashes when exporting with Motion 5
Using Motion 5.0.6 and Final Cut Pro X 10.0.7 on New iMac (December 2012) Mountain Lion,
Intel Core i7 quad-core a 3,4GHz, Turbo Boost fino a 3,9GHz
32GB di SDRAM DDR3 a 1600MHz - 4 x 8GB
Fusion Drive da 3TB
NVIDIA GeForce GTX 680MX 2GB GDDR5
During the rendering of complex FCPX mac crashes and I have to force a restart.
I also happens when I try to export movies with Motion 5.
Does anyone have the same problem with my new iMac?

Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
First, empty the Trash.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Triple-click anywhere in the line below to select it, then drag or copy it — do not type — into the Terminal window:
find . $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl $ 2> /dev/null | wc -l
Press return. The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
The output of this command, on a line directly below what you entered, will be a number such as "35." Please post it in a reply.

Yesterday I installed motion 5. It crashes when creating a new project or opening a template or old project. It runs on macbook 2.1 intel core 2.16 GHz. Thanks or helpful hints.

Yesterday I installed motion 5. It crashes when creating a new project or opening a template or old project. It runs on macbook 2.1 intel core 2.16 GHz. Thanks or helpful hints.

It used to be in there (id 226635 is the last one with it); should I clean it up a bit and put it back with a bit more of a disclaimer?

Why does pre pro cc crash when rendering?

Why does my pre pro cc crash when rendering? It has done this repeatedly

There can be a LOT of reasons. You'll need to start investigating and eliminating variables.
Start by turning GPU acceleration off if it's turned on, and go from there.

After effects crashes when rendering error: (-209)(512)

after effects crashes when rendering , can anyone help me??
after effects error: ..\..\OpenCv\src\video\optflowbm.cpp:103: error: (-209)
(512)
( 25 :: 241 )

We need to know a lot more if we're going to help you. Please provide answers to the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"

After Effects crashes when rendering to H264

Hi,
On one of my computers, After Effects Crashes when rendering to H264. It always chrashes when doing the last frame of a clip. I think its when muxxing the m4a and the m4v together...
Does anyone have a solution? maybe there is some odd codec trash going on?
Thanks in advance!

10.Rick Gerard,
Nov 22, 2012 6:07 AM in reply to espedg
Report
In every version of AE that has been capable of exporting h.264 the quality has been significantly lower than exporting with an app that gives you the option of multi-pass rendering. This has always been true for MPEG codecs that use inter frame (temporal) compression. You just can't get the same quality without multi pass compression. This goes back to the first use of MPEG streams.
AE CS6 may have H.264 encoding broken internally, but any pro has never used AE to render highly compressed delivery codecs because AE was never designed to be the right tool for the job.

Robohelp 8 crashes while opening a converted project from RH7 to RH8

case number: 181233117
when customer when opens a converted project from version 7 to 8, a busy hour glass is dispalyed all the time and robohelp funtionality is unavai
lable most of the time.
Browser: Microsoft IE
Operating System: Windows XP Professional
Application server: WBSPHRV60
have asked the customer to upload the file/project.

What are you expecting from this post?
See www.grainge.org for RoboHelp and Authoring tips

Why would FCP crash when i click within the effect window?

Why would FCP crash when I click within the effect window?

I have an old system, but have not had this problem before.
It is a MAC G5 tower...
FCP 5.1.4
MAC OS X version 10.4.``
Quicktime 7.6.4

FCP Crashes When Rendering or Converting Project

Similar Messages

Maybe you are looking for