FCP doesn't recognize device

Suddenly I can no longer capture clips because my computer doesn't recognize the capturing device(s) (Sony GV-D1000).
I have tried this on two of my computers with two different capturing devices.
I suspect some sort of download upgrade is the culprit as it is suddenly happenning on two computers.
All of the firewire ports recognize other external hard drives (Under System Profile/Hardware/Firewire) but not the GV-D1000 or the PD150 camera, and so it appears that the ports are okay.
User groups say to remove the QuickTime receipt files - I have done this.
The A/V -> DV Out is set to off.
Computers are G4 and a Power Book.
Is there a QuickTime update or some other recent update that would cause this? What else should I look for? How do I get rid of the upgrade?
If I need to uninstall and reinstall QuickTime Pro, which I have already paid for, how do I do this without paying for QuickTime Pro again?
Power Book Mac OS X (10.4.9) FCP HD 4.5

Hi:
You can try this:
http://docs.info.apple.com/article.html?artnum=301852
Hope that helps !
Alberto

Similar Messages

Iphone in recovery mode and DFU mode but PC still doesn't recognize device

HELP! My iphone 4 just keeps blinking the apple logo for hours! I tried the recovery mode and DFU mode, the first time went well, but it started to blink again after I restored it. Now I'm doing the same steps going to recovery mode and DFU mode, they work on the phone but for some reason, my laptop doesn't recognize any device connected. I tried everything on the internet and still wont work. WHAT CAN I DO???
by the way, Mine is windows 7.

it needs repair
Peace, Clyde

Media Sync Doesn't Recognize Device

Just got an unlocked Curve 8320. Inserted a media card, and downloaded Media Sync to my PC, not the whole Desktop Manager. Media Sync now doesn't recognize my device; have tried this tons of times! And, my computer itself doesn't recognize it as a USB drive as well. My device does have the 4.5 software loaded. Is it possible to just drag and drop music files to my microSD card since I can't use Media Sync? Also, does my blackberry have to be connected via USB for me to use Roxio Media Manager? Or can I just insert my media card? Didn't want to download the whole Desktop Manager w/ Media Manager since it already doesn't recognize my device. Aagh!
Message Edited by flamencoqueen on 05-12-2009 05:41 PM
Message Edited by flamencoqueen on 05-12-2009 05:47 PM
Message Edited by flamencoqueen on 05-13-2009 12:27 AM
Message Edited by flamencoqueen on 05-13-2009 12:30 AM

Windows Vista
Have not tried another cable, but the phone CAN charge using this same cable
Laptop computer
Using side USB port, have only 2 on the side
Under Universal Serial Bus Controller: Intel Family USB Universal Host Controller-2830, plus other prior ones installed
USB Root Hub
Also, I do not have Desktop Manager or anything else downloaded. Without having that stuff, should my computer be able to recognize my Blackberry; at least as a USB drive?
Message Edited by flamencoqueen on 05-13-2009 12:42 AM

ITunes 11.0.4 Doesn't Recognize Devices

I've recently updated my itunes and plugged in 2 iphone 4Ss and two iPads, iTunes doesn't recognize any of them. I've restarted, reset, etc. I'm running 10.8.4 on my iMac. iPhoto does recognize all devices so the connection to the computer is proven OK.

I had the same problem
Just redownload the 11.0.4 update and itll work fine and sync. Dont delete itunes just redownload the uodate. Goodluck

FCP doesn't recognize VTR mode on HVX camera

I'm new to FCP7 and can't figure out why log and capture doesn't recognize the VTR mode on my Panasonic HVX. I turn on the camera, switch it to VTR (by pressing the MCR/VCR button) and the launch FCP with my MBP connected to the camera by FireWire. When I launch L&C and the click on the now button, I get a black screen that says the camera must be in VTR mode. Yet when I launch iMovie, the capture window will play and record the video on the camera just fine. The video is on a miniDV tape. I don't have a P2 card so can't try that method.

L&C! Did that work?
Works for you & I can do it from my MBP, but evidently not from my iPad. Weird.
OK...the thing you need to do first in FCP is choose the DV/NTSC Easy Setup. THEN try to capture from tape.
Yeah, did that first. I'll try again when I get home tonight.

My ipod shuffle needs to be formatted, and my computer doesn't recognize device, i checked into the driver details and it says that no drivers are downloaded is there a fix for this?

i really need help with this please

Where do you see these "driver details"? Is this via Device Manager?
Did this iPod previously work with this PC before or is the first time you are trying to connect it?
B-rock

FCP doesn't recognize .motn

Just in the last week or so, FCP has taken a strong dislike to Motion. When I select a clip and do "Send to Motion" with "Embed Motion Content" and "Launch Motion" checked, I get the error: "File Error: Wrong Type."
Same error with "Launch Motion" unchecked.
If I uncheck "Embed Motion Content" Motion boots up and I do my work, but when I save and then try to Import the project I get: "File Error: 1 file(s) recognized, 0 access denied, 1 unknown)" and no .motn project imported
I've tried changing the access rules for the folder, and that didn't help. I tried trashing the FCP preferences and the Motion preferences, but that didn't seem to help. I'm really out of ideas. I know I can always render QTs and use them, but I'd like to have the ability to use .motn files right in the timeline.
Anybody have any ideas about this one? Any help would be sorely appreciated.

I seem to be having the exact same issue. I have a series of clips, 4 frames each clip, for a 1 minute piece in a timeline. If I select the clips, go to the "Send to Motion" function and leave "Embed Motion Content" and "Launch Motion" checked, it will prompt me to save, then boom pops up with the exact same error. My timeline is a 23.98 time at 4x3.
Not sure why it is doing this. Have used this function before without issue.

FCP doesn't recognize Motion project file

I've almost completed the lessons in the Apple Pro Training Series "Motion".
When I get to the last lesson and try to import my motion file into Final Cut HD - all motion files are greyed out and not available for import.
What do I need to do to be able to import Motion files into FCP?
Dual 2 GHz Power PC G5 Mac OS X (10.4.4) 512 MB DDR SDRAM

If you only have the trial version of Motion, it does
not support integration.
Do you have the full version?
I am having the same problem with a registered FCP Studio suite. Greyed out .motn files on the import requester.
When I change the "Import File" requester selection to All Files and select a .motn file, I get the error message "File Error: 1 files(s) not recognized, assess denied, 1 unknown."
I have tried re-registering, deleting FCP prefs, repairing permissions, running cron scripts, re-booting.
No good so far.
This is on a two day old, format and complete fresh install partition.
OS 10.4.6, QT 7.0.4, FCP 5.0.4, Motion 2.0.1
G5 Dual 2.0, 5.5GB RAM, 2TB RAID Mac OS X (10.4.5) FCP5 Suite, CineWave, Boris, blah, blah ...

Ovi suite doesn't recognize device

Hello, new problem:
I start ovi suite as always.
I connect my cellphone N97 with usb, as always.
New: ovi suitedont recognice my decive!!
Reinstall Ovi..connect..nothing.
Connectivity N97: usb modus.
I realy dont know what to do.
Does anybody recognise the problem and know the solution for it?
Thanks,
Renee.
Holland

Hi,
I donot have any problem with my N97.
I am not sure this will solve your problem but you can try this?
1. Uninstall Nokia Ovi Suite, PC Connectivity solution and Nokia Connectivity cable drivers from Add/remove
2. Delete the files from here:
C:\Documents and Settings\User\Application Data\Nokia\Ovi Suite
C:\Documents and Settings\user\Local Settings\Application Data\Nokia
C:\Documents and Settings\All Users\Application Data\OviInstallerCache
3. Restart your PC
4. Download and install latest Nokia ovi Suite http://europe.nokia.com/support/download-software/nokia-ovi-suite
5. Restart PC again and try to use NOS
if this does not help then check whether you are using latest phone software or not. you can upgrade your phone software by following bellow mentioned steps...
**** before going for upgrade donot forget to take backup else you might loose your phone data****
1. Download Nokia pc suite and use NSU or Nokia ovisuite (For Windows User only)
2. Try over the Air update (MAC/Windows User)
If your mobile data rates allow, try doing an over the air update. Support varies by phone, variant and software
Go to tools >Utilities> Device manager (location may vary by device)
There should be an updates tab
This functionality may not be available in your device. Contact your service provider for more information
To view or update the current software version of your device or to check the date of a possible previous update, select Menu> Tools> Utilities> Device mngr
To check whether software updates are available select Options> Check for Updates
First off BACK UP YOUR DEVICE! make sure you have a back up of the memory card and also the device memory and make sure that the battery of your device has enough power or connect the chager before starting update. To start the update select access point. The device starts to download the device data.
When the data is downloaded the update description is displayed. Select Accept to accept the download of the update package or cancel to cancel the download. IT may take several minutes and you can use your device during the download but not during installation time.
Server Profile Settings
Menu> tools> utilities> Device Manager
to add a new server profile seleat Options> New server profile.
Contact your service provider for correct settings
Server name- Enter a name for the configuration server
Server Id- Enter the unique ID to identify the configuaration server
Server Password- Enter a password to identify your device to server
Access point- Select the access point to connect to the server
Host Address- Enter the url address of server
Port-Enter the port number of the server
User name & password- Enter your username and password for the server
Allow configuration- To allow receiving configuration settings from this server select yes
Auto Accept all requests-To have your device ask for your confirmation before accepting configuration from this server. Select NO
Network Authentication- Select if network authentication is used. Enter your Network username and Network password to identify your device to the server.
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You

After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

Refer to this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538

When I plug my iPhone in to my computer, iTunes doesn't recognize it as a device. I have deleted and re-downloaded iTunes twice which seems to fix the problem temporarily but then the next time, the device is not recognized.

when I plug my iPhone in to my computer, iTunes doesn't recognize it as a device. I have deleted and re-downloaded iTunes twice which seems to fix the problem temporarily but then the next time I plug my phone in, the device is not recognized.

What happens if you go to iTunes > File > Devices, do you get the option to Sync iPhone?
You could try a reinstall of iTunes. OS X Yosemite: Reinstall apps that came with your Mac

My iTunes suddenly stopped working and doesn't recognize any of my devices and gives me a AMD error. I've tried several times to uninstall all Apple programs and reinstall to no avail. I'm running windows 7 on a Dell laptop. It worked fine for years .

My iTunes suddenly stopped working and doesn't recognize any of my devices and gives me a AMD error. I've tried several times to uninstall all Apple programs and reinstall to no avail. I'm running windows 7 on a Dell laptop. It worked fine for years then I decided to update my iPhone 4S and it didn't recognize it or any other iPod or iPad.
Can someone please help ?

I am having all sorts of problems with 9.1.1.Crashes and not only iTunes but I have to restart all the time.
GET TO WORK APPLE !!!!

I have Ipod Nano 6th generation. My computer recognizes device but Itunes doesn't. Any suggestions?

I have Ipod Nano 6th generation. My computer recognizes device but Itunes doesn't. Any suggestions?

You might have better luck posting in the iPod Nano forum. You posted in the iPod Touch forum. For an iPod Touch one would start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

TS2776 when I connect my I phone to my computer, I Tunes says it doesn't recognize my device. It did just a few days ago! Help

I need help. When I connect my I phone 5 to I Tunes it doesn't load it and I get the message that It doesn't recognize this device. To unplug and try again. I have done this 5 times and always get the same message, but when I plug it in it offers the option to download my pictures. What do I do to get it to reload and Sync?

Reset the device.
Try a different cable.
Try a different USB port.
Reboot the computer.

Macbook Pro 15" USB PORT DOESN'T RECOGNIZE ANY DEVICE.

I got my macbook pro 15" for about 1 year and 2 weeks ago, when I turned on my macbook and put my mouse ( Death Adder) into the USB PORT, my macbook DOESN'T RECOGNIZE IT. There are 2 usb ports on my macbook, I tried both port and there was only one port work correctly, the other one didn't work at all, I also tried to put my memory stick, external hard drive, vodafone 3g usb, ipod,....into that USB PORT but non of them worked. Is there any one here have the same problem???? Can you guy help me please. I stay quite far away from Apple Store so it is hard to bring it to repair. I tried to reset SMC, Update Software,...but still not work...HELP ME PLEASE...

I can't fault your troubleshooting. Sounds like a bad port.
Home remedies are limited. You can grab a magnifier and shine a flashlight in there. If you see any foreign material, use a toothpick or other non-conductive tool to extract it. If you can, give it a good blast of (dry, canned) compressed air to blow any particles loose.
Sometimes you can trick a flaky USB port into working at least intermittently by plugging in an extension cable or right-angle connector. Play with a device that lights up so it's easy to see whether it's working.
Take a hard look inside the connectors at the end of your Death Adder and other frequently-used devices. If you see any corrosion or bent pins, that's what damaged your USB port.
If the port requires physical repair, it's best to use Apple or an authorized dealer because if they make things worse while trying to fix it, they have to make it right. Joe's Appliance isn't similarly accountable.
If you need more USB ports, ExpressCard to USB adapters are dirt cheap.
Good luck.

FCP doesn't recognize device

Similar Messages

Maybe you are looking for