FCP ERROR when trying to convert variable frame rate Panasonic P2

Ok, yesterday I was able to convert variable frame rate footage so it rendered out nice slo mo's via DVCPRO HD Frame rate converter in FCP 6.0.4, it worked perfect. I tried it multiple times - So I know it can be done... Today however I created the same "easy setup" in FCP I used yesterday, and it wont work?
it comes up with the error:
"An error occurred during processing, unable to conform source media FCP" is there some setting that by default switches"
has anyone heard of this happening? it seems like a program error... but I could be wrong... I haven't been able to figure it out on my own.
does anyone have any suggestions?
Thanks!
A

Lance,
Sounds like you have done a very thorough job of tracking down your problem and a temporary solution. Just one question. Is the footage from the HDX-900 that you say...
Lance Moody wrote:
Since some footage from the HDX-900 was shot at 60FPS for conversion to 24FPS as slo-mo, I then attempted to use the DVCPRO HD Frame Rate converter to accomplish this.
flagged in camera as being 24fps or are you just trying to convert it after the fact?
o| TonyTony |o

Similar Messages

Error when trying to convert excel files to pdf

I'm getting the following error when trying to convert .xls and .xlsx files to pdf, using the "Create PDF" option:
Error message from the primary converter:
ALC-PDG-010-012-PDFMaker reported an error while printing the document.
Word, Powerpoint and Text files convert without any issues. Also I'm able to opent the excel files and convert them to pdf using the acrobat option in excel.
Livecycle Version: 10.0.2, GM
MS Office Version: 2007
Any help would be appreciated. Thanks in advance.
Regards,
Suhail N.

It is always difficult when you need to convert multiple xls files to pdf or multiple sheets to pdf. If you have a single file to convert then the best method would be to copy your data to doc file and then convert it into PDF . If you have multiple files to convert then it is really difficult to convert all the files manually. Then the better method would be to use converter tool to convert excel to pdf . By doing this you can convert many files in just few seconds.

I'm getting a 9041 error when trying to convert files to AAC -- any ideas on how to fix it? the files files in iTunes show up as Apple Lossless but i can't put them on my iPod

i'm getting a 9041 error when trying to convert files to AAC -- any ideas on how to fix it? the files files in iTunes show up as Apple Lossless but i can't put them on my iPod

"I have been able to convert to AAC by first converting to AIFF and then to AAC. This is a pan though."
this worked for me.
thanks.

I receive an error when trying to convert PDF to word. Pls help, I have a paid acct.

I receive an error when trying to convert PDF to word. Can someone advise on how to resolve?

"an error" really doesn't tell us much.
Assuming that you use the ExportPDF online service, I suggest that you Contact Customer Care - click on the Still need help? button to chat or talk with an agent.
[topic moved to ExportPDF forum]

Please help. Keep getting a conversion error when trying to convert a PDF to a .docx. Advice?

Please help. Keep getting a conversion error when trying to convert a PDF to a .docx. Advice?

Sara,
Please see my answers in bold below.
What browser are you using? Try clearing the cache, or using a different browser. N/A
Are you converting from within Reader, or directly via the ExportPDF website. Within Reader.I disabled the OCR and this did not work either. Try converting from within Reader, and disable OCR as detailed in this document: How to disable Optical Character Recognition (OCR) when converting PDF to Word or Excel.
Are you on a networked computer? Make sure that there aren't any firewall/proxy settings that are preventing you from uploading files to the Internet. Not having problems uploading the file--that works fine.
Make sure the file is within the file-size limit of 100 MB. It is <40.
I get the error message, "File failed to be converted using Adobe ExportPDF online."
Thanks for your help in advance.

Error when trying to convert pdf to word

an error occurs when I try to convert pdf to word, it says, "an error occured when trying to access the service."

how do you fix it?

'unexpected error' when trying to convert PDF to word

THis keeps coming up in the forum and hasnt been answered. trying to convert PDF to word but it says there is an unexpected error. help please.

Hi!
Please send us a copy of the file here with a brief description so we can take a look at it. Thanks! Sorry for the problems.
Dave, Adobe

Reg error when trying to convert planned order to production order

Dear all,
While trying to convert planned order to production order we are getting error CO684,( you cannot make an assignment to make to order stock---create an order with respect to sale order where account assignment to sales order or project is not allowed in settlement profile to chosen order type.
What is to be done to correct it.
Thanks in advance
Regards
madhav

Hi
Check which settlement profile maintained in your order type using OPJH.
Then go to the t.code OKO7 and select the same settlement profile which is there in your order type.
In receivers
Change the sales orders settings to
Sales orders 1 Settlement Optional
If in your scenrio not using sales order the change to Settlement not allowed
try this
Thanks
S.Murali

Getting a 9041 error when trying to convert to AAC

I'm trying to convert some Apple Lossless songs to AAC and every time I try (different songs) I get "Unknown error occurred (9041).
I was able to drag the song to the desktop, open it in QuickTime and export it as an AAC so the files aren't corrupted.
I'm running Lion and the latest version of iTunes

"I have been able to convert to AAC by first converting to AIFF and then to AAC. This is a pan though."
this worked for me.
thanks.

Automator error when trying to convert images

Hi everyone,
I'm trying to create a workflow to convert images from .psd to .jpeg and for some reason when I run the workflow I get an error on the convert images option. All it says is action failed. Anyone have any advice? This is my first time using automator and I successfully set up a workflow to resize images, so I think I get the gist.
Thanks!!

Are you using a photoshop-specific action, or the built-in "Convert to JPEG" action? It's entirely possible that the built-in action might not consider a photoshop file a graphics file. Your choices then are to see if adobe has put out some specialized actions for dealing with psd files, or to switch to applescript and script photoshop directly.

Error when trying to convert 7.1 build script to 2011 lvproj

I have inherited a LabVIEW 7.1 project that must be upgraded to a more recent version of LabVIEW. I have chose 2011.
I am trying to use the recommended method of "Tools->Convert Build Scrip..." but it is not working. I'm getting a message along the lines of
The build was unsuccessful
Possible reasons
Invoke Node in AB_Convert_Add_Source.vi-
AB_Convert_Build_Script.vi -
BuildMonitor_ImportBuildScript.vi -
BuildMonitor_Global_OnCommand.vi-
BuildMonitor_Global_OnCommand.vi.ProxyCaller-
Any knowledge out there?

You're welcome! Glad I could help out.
Would it be possible for you to post the project here so that I can create a report of this particular error and submit it to R&D's database? If the project is too large/proprietary, I understand, but if we can reproduce this error at NI, then we can work on eliminating this bug from future Labview releases.
Best,
Dan N
Applications Engineer
National Instruments

-54 error when trying to convert to ipod/iphone

I moved all my itunes content off the startup drive on my mac, then changed the location in the advanced menu, etc. My movies are encoded to play on an appletv. When I try to convert a movie to iphone/itunes using the advanced menu or right clicking I consistently get an error -54. If in itunes preferences I change the location of the itunes music folder back to the start up drive in an empty folder (leaving the content on the non startup drive) itunes will convert the file and the converted file will end up on the startup drive and the error message goes away. This seems like a bug, and I was wondering if anyone else has experienced this or if there is something that I can do to fix this . . .
Thanks for your help.

It sounds like you do not have administrator rights on the computer. Are you the only user on the account? You can go into the Control Panel and look under user accounts and see if it lists the account as an administrator.

POL-8035 error when trying to use variable sensor

I stumbled across this blog last week while looking for ways to streamline logging in one of my BPEL processes:
http://technology.amis.nl/blog/?p=3326
I followed the procedure outlined in the blog and attempted to test it. I get the following error stack in my OPMN log file (edited here for some brevity):
<2008-07-29 13:14:14,925> <ERROR> <default.collaxa.cube.sensor> <DataRouter::send> error
ORABPEL-20301
Data Publisher failed.
The Reporting Data Publisher LogAction failed.
Please examine the log file for more details.
     at com.collaxa.cube.engine.sensor.sa.DataRouter.send(DataRouter.java:101)
     at com.collaxa.cube.engine.sensor.sa.DataRouter.send(DataRouter.java:133)
     at com.collaxa.cube.engine.sensor.dca.DataCaptureAgency.send(DataCaptureAgency.java:181)
     at com.collaxa.cube.engine.sensor.dca.DataCaptureAgency.onVariableChange(DataCaptureAgency.java:331)
Caused by: ORABPEL-20301
Data Publisher failed.
The Reporting Data Publisher LogAction failed.
Please examine the log file for more details.
     at com.collaxa.cube.engine.sensor.sa.BpelPublisher.publish(BpelPublisher.java:137)
     at com.collaxa.cube.engine.sensor.registry.BpelSensorActionInfo.publish(BpelSensorActionInfo.java:148)
     at com.collaxa.cube.engine.sensor.sa.DataRouter.send(DataRouter.java:93)
     ... 58 more
Caused by: Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.3.0) (Build 070608)): oracle.toplink.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: [POL-8035] no such attribute or methodError Code: -8035
Call:INSERT INTO VARIABLE_SENSOR_VALUES (ID, PROCESS_INSTANCE_ID, NUMBER_VALUE, PROCESS_ID, ACTION_NAME, BLOB_VALUE, REVISION_TAG, CREATION_DATE, SCHEMA_DATATYPE, DATE_VALUE, SCHEMA_NAMESPACE, DOMAIN_REF, SENSOR_NAME, SENSOR_TARGET, ACTION_FILTER, TARGET, CLOB_VALUE, TS_HOUR, DATE_VALUE_TZ, UPDATER_NAME, MODIFY_DATE, UPDATER_TYPE, CRITERIA_SATISFIED, VALUE_TYPE, EVAL_POINT, VARIABLE_NAME, VARCHAR2_VALUE, ACTIVITY_SENSOR_ID) VALUES (151, 490001, NULL, 'TestSensorLogging', 'LogAction', NULL, '1.0', to_timestamp('2008-07-29 13:14:08.097','yyyy-mm-dd HH24:MI:SS.FF'), 'string', NULL, 'http://www.w3.org/2001/XMLSchema', 0, 'LogSensor', '$Variable_LogMessage', NULL, '$Variable_LogMessage', NULL, 13, NULL, 'Assign_ProcessAndInstanceID', NULL, 'assign', NULL, 12, NULL, 'Variable_LogMessage', 'TestSensorLogging:490001: Creation Date : 2008-07-22T15:52:00', NULL)
Query:InsertObjectQuery(com.collaxa.cube.engine.sensor.sa.publisher.toplink.model.VariableSensorValue@ec13e0)
     at oracle.toplink.exceptions.DatabaseException.sqlException(DatabaseException.java:282)
     at oracle.toplink.internal.databaseaccess.DatabaseAccessor.executeDirectNoSelect(DatabaseAccessor.java:669)
Caused by: java.sql.SQLException: [POL-8035] no such attribute or method
     at oracle.lite.poljdbc.LiteThinJDBCConnection.thinSQLError(Unknown Source)
     at oracle.lite.poljdbc.LiteThinJDBCStatement.thinSqlPrepare(Unknown Source)
     at oracle.lite.poljdbc.LiteThinJDBCStatement.executeDirect(Unknown Source)
     at oracle.lite.poljdbc.POLJDBCStatement.executeUpdate(Unknown Source)
     at oracle.oc4j.sql.proxy.StatementBCELProxy.executeUpdate(StatementBCELProxy.java:140)
     at oracle.toplink.internal.databaseaccess.DatabaseAccessor.executeDirectNoSelect(DatabaseAccessor.java:660)
     ... 91 more
What stored procedure is it trying to execute, why isn't it finding it and how can I correct the problem?
Thanks for your time,
Paul Camann

Hi Paul,
Oracle Lite is not certified with 10.1.3.x SOA Suite, see
http://www.oracle.com/technology/software/products/ias/files/oracle_soa_certification_101310.html#BABGIAHB
You might want consider using one of the certified databases
(For example Oracle Database 10g Express Edition 10.2.0.1)
Best Regards,
Ralf

Invalid number error when trying to convert a varchar2 to a number.

I need to extract the middle four numbers from a varchar2(12) and then convert it to a number. The middle four are numbers but the first four can have letters. I've tried
TO_NUMBER(substr(wptk.ext_wo_num,5,4))
TO_NUMBER(LPAD(wptk.ext_wo_num,5,4))
substr(TO_NUMBER(wptk.ext_wo_num) ,5,4)
cast as number
I need to get rid of any 0 that are at the beginning of the four numbers. Some of the data has no 0 and some can have up to three 0 at the beginning. Is there a way to do that?
thanks.

user10426897 wrote:
I came back with 56 rows that look like this 1127-0651-E1. I am trying to translate an ingres view into Oracle that has this in the select statement: INT4(LEFT(TRIM(RIGHT(wptk.ext_wo_num,8)),4))You could use regular expressions...
SQL> with t as (select '065101412354' as num from dual union all
2             select '065106523237' from dual union all
3             select '065206523238' from dual union all
4             select '065606542356' from dual union all
5             select '080101410218' from dual union all
6             select '080102520218' from dual union all
7             select '080106020218' from dual union all
8             select '080201120219' from dual union all
9             select '080601111214' from dual union all
10             select '080801351216' from dual union all
11             select '080802511216' from dual union all
12             select '10000133013' from dual union all
13             select '10000133SC3' from dual union all
14             select '10000133SP4' from dual union all
15             select '10000211011' from dual union all
16             select '10000241011' from dual union all
17             select '10000601S29' from dual union all
18             select '10000601SC1' from dual union all
19             select '10000601SH2' from dual union all
20             select '10000601SP2' from dual union all
21             select '10000602A11' from dual union all
22             select '10000602A50' from dual union all
23             select '10000602A54' from dual union all
24             select '10000602A59' from dual union all
25             select '10000602C06' from dual union all
26             select '10000602E67' from dual union all
27             select '10000602M00' from dual union all
28             select '10000602M01' from dual union all
29             select '10000602M07' from dual union all
30             select '1127-0651-E1' from dual)
31 --
32 select num, to_number(regexp_replace(num,'^.{4}-?([0-9]{4}).*$','\1')) as num_num
33 from t
34 /
NUM            NUM_NUM
065101412354       141
065106523237       652
065206523238       652
065606542356       654
080101410218       141
080102520218       252
080106020218       602
080201120219       112
080601111214       111
080801351216       135
080802511216       251
10000133013        133
10000133SC3        133
10000133SP4        133
10000211011        211
10000241011        241
10000601S29        601
10000601SC1        601
10000601SH2        601
10000601SP2        601
10000602A11        602
10000602A50        602
10000602A54        602
10000602A59        602
10000602C06        602
10000602E67        602
10000602M00        602
10000602M01        602
10000602M07        602
1127-0651-E1       651
30 rows selected.
SQL>

Adobe displays error when trying to convert PDF to Word file

Help! I just bought the Adobe convert pdf's to word package as it was advertised on the right side of a pdf file I was working on. This file advertised itself as non savable but I don't want to spend hours working on this application only to have my computer freeze or shut down and have to repeat the work. On the right side of the document is an advertisement from Adobe to convert PDF's to Word or Excel for a fee. I pay the fee and now the pdf file fails to convert to Word. I know some pdf's are protected and won't convert. How do I know if that is the problem? Why would Adobe advertise that it could convert a pdf to word if it was a protected document? I have no idea how to trouble shoot this.
Thanks

Hi utschy33,
For privacy reasons - we would not allow the advertisement to 'know' the level of security on any document. Sounds like you were accessing via a browser regardless so we cannot control that portion.
Do you happen to know the original author of the document? And if not - what is your intension with the document? To share?
Let us know so I can try to help you futher! Thank you for your time.
Kindest regards, Stacy

FCP ERROR when trying to convert variable frame rate Panasonic P2

Similar Messages

Maybe you are looking for