Fcp export in ntsc format and burn into IDVD

i need help, when i export my fcp , i have set the settings for ntsc but in IDVD, when payed, it keeps jumping. although i did another one in pal, and things are ok, what setting do i have to put and also mpeg will work also or not. is pal regular in all the dvd players or ntsc?

First, what is your sequence ntsc or pal? ntsc is the standard for north america. and pal is the rest of the world (for the most part). most pal players will play ntsc disks without a problem. and computers will play either pal or ntsc.
You need to describe your workflow from shooting, thru capture, and editing. If you start with ntsc, stay with ntsc. If you start with pal, stay with pal. If you have pal material and need to create an ntsc dvd or vice-versa you need to do a standards conversion to your finished sequence.

Similar Messages

  • Imovie 09 - exporting options for HD and burning with iDVD

    I hope someone can be of help...here it goes
    I shoot my footage in 1080i and import as Full HD into Imovie 09. I would like to export the movie files in 1080i so that I can burn to bluray in the near future. However, I'm currently stuck with burning to DVDs currently.
    1) Does burning to DVD with movie files that are 1080i present any issues with iDVD? If yes, how should I export from imovie 09 to have the best quality?
    2) If exporting as 1080i, should I use: "Export as movie" or "Export as quicktime"
    3) If "export as quicktime", what are the best settings to use?
    Currently, I'm using "export as movie" with "Full HD" and when I go to burn a disc in iDVD, I have to use "high quality" or "profesional quality" due to a popup that says insufficient space...the result doesn't look good. Would the result be better on DVD if I used 960x540 to export and then used that file to burn to DVD?
    My current workflow take about 6 hours to export as 1080i (for 1.5 hours of footage) and then another 4 hours in iDVD to reencode.
    I know, lots of questions
    Thanks for taking time to read post.

    Hi
    As I get it - iMovie'08 & 09 are meant to produce small YouTune movies.
    Not Full HD
    There is NO version of iDVD that can handle HD or Full HD.
    So I think You can export under Share a fairly good QuickTime movie but then You
    need another tool to get it onto a DVD.
    I would use
    • Roxio Toast™ 10 Pro
    • With Blue-Ray component
    • Blue-Ray burner and disks
    Still You need a
    • Blue-Ray Player to be able to view it (Can't be playebacked on DVD-player OR Mac)
    • PlayStation 3 - has a Blur-Ray player
    I would also prepare my movie in FinalCut Express or Pro. One has to cheque
    that Your format can be handled without any limitations.
    Yours Vildly Guessing Bengt W

  • Is it legal to convert the music files, which I have purchased in recent months, to the mp3 format and burn them on to a CD so that they can be played on non-apple music devices that do not support the M4A format?

    Is  it legal to convert the music files, which I have purchased in recent  months, to the mp3 format and burn them on to a CD so that they can be  played on non-apple music devices that do not support the M4A format?

    Hi,
    This is what apple says about converting files http://support.apple.com/kb/PH12167
    Jim

  • Is it legal to convert the music files, which I have purchased in recent months, to the mp3 format and burn them on to a CD so that they can be played in non-apple music devices that dont support the M4A format?

    Is it legal to convert the music files, which I have purchased in recent months, to the mp3 format and burn them on to a CD so that they can be played in non-apple music devices that dont support the M4A format?

    Yes, of course it is legal.
    To convert the format, follow one of these documents:
    iTunes 11 for Windows: Save a copy of a song in a new file format
    iTunes 11 for Mac: Save a copy of a song in a new file format
    Also note that you have the option of buying your files in MP3 format in the first place, from Amazon MP3 or other online retailers.  MP3 files will work in iTunes as well as virtually every other player, program, and device.

  • Audio gets out of sync after export and burn to iDVD - works in iMovie

    I've burned my DVD show twice on iMovie and iDVD and the audio music tracks slowly get displaced over the course of the show (15 min) after exporting and burning to iDVD. It gets pushed back so that it starts later each new track...I've locked the audio to the playhead for each new audio track - however, there are some empty gaps between the tracks, does this have anything to do with the displacement? Or should it not matter since the tracks are locked?
    I had it all synced up in the playback on iMovie and had it aligned with visuals, however, after burning, it gets displaced and everything gets off...
    Any help would be appreciated, thank you
    Chris

    The problem:
    http://www.dvformat.com/htm/features/2000/800/dv_formatfaq.htm
    (Scroll down about two thirds to "What's the difference between locked and unlocked audio?" )
    The solution:
    Always use 16-bit/48kHz audio.
    iMovie: Audio and Video Lose Synchronization
    http://docs.info.apple.com/article.html?artnum=61636
    A few possible solutions here:
    http://www.danslagle.com/mac/iMovie/audio/1001.shtml
    iMovie: Improving audio and video synchronization
    http://docs.info.apple.com/article.html?artnum=42974

  • Workflow for exporting xml from Excel and importing into table in InDesign

    Hello,
    I have worked out how to get data from a .xlsx into a table in InDesign. However, the workflow is still a little clunky and I am looking for way to automate the process further. My current workflow is as follows (files can be download here: http://visual360.co.uk/xml.zip)
    xml is exported from .xlsx by mapping the schema (see what_I_get.xml)
    assign tags to table and individual cells in InDesign
    This is the clunky bit: edit the what_I_get.xml to:
    remove the indentation (this seems necessary as otherwise when I get to stage 4, all the imported text is also indented)
    add tag for table in InDesign (p10_table)
    add tags for individual cells (p10_c11 etc.)
    import the produced what_I_want.xml in the structure panel of InDesign.
    Can anyone point me in the direction of how to automate step 3 above?
    Thanks in advance,
    Nick

    Hi Mike,
    Thanks very much for the reply. I am not at all familiar with XSL/XSLT. I have given it a quick google and it seems like it could be quite a steep learning curve to master. Maybe if I explain the whole context here, it may allow you to point me in the direction of a tutorial that provides a step by step approach to achieve my final goal. Alternatively, you may be able to suggest a whole new workflow.
    I am in the process of updating this document: http://www.ncl.ac.uk/students/insessional/assets/documents/IS_Brochure_2014-15.pdf
    The tables on pages 10-21 contain lots and lots of repeated information. We want the layout to in this format so that each group of students has all the information relevant to them on a single double spread. However, the challenge of using this approach is that it is very high maintenance to ensure the duplicated information is kept in sync - even using a copy / paste approach.
    I was hoping to overcome this by using a single source of data (eg. a spreadsheet) which would then feed into the InDesign. This workflow seems to be overcomplicated by the apparent need to use xml as the "middle-man".
    Ideally, I would like to press the export button in Excel and get this information into the the correct cells in the tables on pages 10-21 without a significant amount of manual labour - after all, my reasons for investigating an automated approach in the first place was to avoid the manual entering of data ie. the scope for error...
    An alternative approach maybe to skip Excel altogether and just use .xml. However, I am not sure that this is possible as Indesign only seems to allow you to import each element once. Maybe you could correct me here...
    I am happy to invest a certain amount of time in developing this approach as once it is in place, it will save a huge of proof-reading time year after year, especially as inconsistencies still persist despite our best efforts to weed them out.
    If you could let me know your thoughts on this and maybe identify a tutorial that would help me, I would be extremely grateful.
    Thanks again!
    Nick

  • Completed QT movie changes format when imported into iDVD and DVD Studio

    I made a few movies and I simply want them on a DVD. I convert them into QT movies and everything looks great. I filmed both movie using my Canon Vixia M30 in 60i and maximum quality. When I move the files into iDVD, it squishes the actual movie into 4:3 even though the original QT movie is 16:9 and iDVD is set up for 16:9 and the quality is horrible. I check the "Project Info" and my 3.1GB file has shrunk down to a 376MB file. I tried to put the file into DVD Studio and the same thing happened.This has happened with the last two movies I made. I'm really getting frustrated. What am I doing wrong? Help!!

    A DVD uses the highly compressed MPEG2 codec. So it is impossible to have it look exactly the same.
    Nothing you can do about that, the DVD video specification is strictly set out.
    First of all, export from FCP. Self contained with Current Settings (same as the Timeline).
    Bring that file into Compressor and apply one of the time based DVD presets that the running time of your video fits into -for example: *DVD 90 mins Best Quality 16:9*. Import the resulting MPEG2 and AC3 files into DVD Studio Pro. You must also tell DVD SP that your film is 16:9.

  • I import in HD and Export in HD 1280x720 and Use the IDVD burner How do I get the best quality? It seems to be a generation down on quality.

    Need help with getting best quality for DVD's.

    The best quality you can get is to first understand that the biggest frame you can play back using a DVD player is 720x480. So no matter how big the image is going into iDVD it is throwing away some information to get it all to fit 720x480. Your best option then is go to Share Menu > Media Browser... Then choose the Large size.
    Open iDVD and find your video project by clicking on the Media button in the iDVD lower right hand corner. Then above that there's the media browser window with the Movies button on the right hand side. Click Movies button and browse for your project under the iMovie star icon.
    Drag that project into a clip and burn the project to a DVD-R.

  • Setting PAL/NTSC format with OneStep in iDVD 5

    I'm trying to create a DVD from some MiniDV tapes I've recorded, but I need to make sure it's recorded in PAL format as it's being sent overseas. I'm using the OneStep option in iDVD, but the only place I could find to set PAL/NTSC is in the preferences, which is only available when you're using a project. I created a dummy project and set it to PAL, then quit iDVD, restarted and went to the OneStep option to burn the DVD. The problem is I think it still recorded in the NTSC format because the DVD played fine on my home DVD player on my tv, which is NTSC. I checked the settings again on iDVD, and it still says PAL, but I'm not convinced it actually recorded with OneStep in PAL since it plays fine on my home system. Can anyone tell me the definitive answer to recording in PAL/NTSC using the OneStep option in iDVD? Thanks in advance.

    I used OneStep once... Don't like it. So I'm not much help there, but...
    I just returned from an Italian-based cruise ship and bought their DVD of the cruise. I became acquainted with the videographer since he was on a few excursions we took. When I bought the DVD, he was there and I asked about whether I needed NTSC for back home. He said: "It doesn't matter with DVDs." Apparently, he was right because I went back to my cabin and played it in my PowerBook without any trouble. Same here in the USA.
    So maybe it doesn't matter, but I can't tell you that with 100% assurance.

  • Dvd keeps ejecting during multiplexing and burning in idvd

    Ok, I realize a lot of other people have had this problem and somehow managed to resolve it. I have done a lot of reading and experimenting but so far NOTHING has worked. So, to recount everything that I have tried and all the details to this problem:
    First of all, I would like to mention that I have successfully burned a number of DVDs in idvd in the past. Then suddenly it just stopped working.
    I have run a verify/ repair disk permissions. I have deleted all the idvd files off my computer, the .plist and preferences file, restarted, and reinstalled iDVD TWICE with a custom install. I have 500 gb of free space on my boot drive. I used a cleaning disc on my SuperDrive, and my regular DVD player. I switched to a better brand of blank dvd. I am now using Sony DVD-r, 4.7 gb discs although memorex DVD+r always worked just fine before. The project I am burning fits on the disc. I am not using chapters. I tried turning on the tv safe area and made sure everything was inside it, but still the same problem. I tried booting up in safe-mode then restarting. Still, same issue. I am burning at 2x speed, using professional quality setting. The project preview works just fine. It goes through the whole idvd process just fine, until the burning and multiplexing. After burning about 10 minutes of the project, the disc ejects suddenly. Idvd says "done" but then at the bottom it says "about one minute left" and the little burning wheel symbol is still spinning. The disc plays fine in my DVD player till about ten minutes in, then freezes and eventually goes back to the main menu. I can see on the disc that it is only partially burned.
       Oh, and I have also tried saving to a disc image and burning with toast and disc utility. Once, this actually did work with toast and resulted in a playable DVD. The weird part was that I still got the error sense key message in toast and thought I had made another coaster, but when I tested the DVD it worked fine in my regular dvd player only (it was not readable in my xbox or ps2). Since that one fluke, however, it hasn't been successful. Disk utility did not work for burning the disc image. I am absolutely at a loss here...somebody PLEASE help.

    I believe I have finally fixed the problem but I am going to post what I went through just in case someone else ever runs into these same issues, maybe I can save them some time. I went through so much troubleshooting and each problem solved seemed to result in new problems, so, let me recap.
    First, computer was working fine. Burned a DVD, it worked. Then a few days later, tried to burn another DVD. It didn't work. I tried different brands of discs, different types of discs, (-r and +r) sometimes there was a partial burn, sometimes no luck at all and an unusable, unplayable disc. The disc would eject early during the burning phase, giving me simultaneous contradictory messages that it was both "done" and had " about one minute left".
    I tried running a verify/ repair disk permissions. Everything came out fine, but still no burned DVDs. I tried uninstalling and reinstalling idvd. I tried a cleaning disc. Still no go. Sometimes idvd would crash or freeze on me or give me error messages. Result varied depending on what i tried, but were never good.
    Then I bought an external drive and tried saving my DVD project as a disc image and burning with toast as many people have suggested. This worked! So, I concluded that my SuperDrive was faulty but I'm not going to bother getting it replaced right now because the external works just fine. I thought my problem was finally solved, but then...
    I noticed that upon restarting, my computer would display a white-gray screen as is normal, with the familiar apple symbol, but now a new addition: a very annoying loading bar that took 5-10 minutes to load. Unacceptable!!! Also, I noticed shortly after that iTunes did not work. It wouldn't even open, but crashed due to an error and asked if it could send a report. I tried deleting and uninstalling iTunes but that didn't work.
    I ran another verify disc permissions with disc utility, and I got a very bad error message. It said there were errors on the drive and it could not be repaired and it said I needed to start up from the Mac OS X install disc and use disc utility to repair the volume. Problem with that...my install disc says it can't install on this computer. I soon learned from one (finally) helpful apple support guy that the reason for this was that I am running snow leopard 10.6.8 and the disc that came with my computer was for 10.5.2 or something.
    On a side note: I had called apple support before and specifically asked if the reason the disc didn't work was because it was for a different version and the guy said he had no idea if that was the reason or not. Jerk. CLEARLY, that was the reason and my ignorant butt didn't know any better and he wanted me to pay 19.99 just to answer that question for me.
    So, I went to the apple store and purchased snow leopard. It was delivered today, I started my computer from the new snow leopard disc and repaired my drive. Restarted. A bit slow restarting but no more loading bar and not as bad as before...iTunes still didn't work but I completely uninstalled a reinstalled it again and this time it seems to be working fine. Idvd is working, I saved another movie to disc might. And am assuming it will still burn fine with toast in the external drive.
    During my arduous troubleshooting I discovered that I most probably have the seagate 1 tb hard drive that was recalled by apple due to its tendency to fail...whether this has been the root of my computer's troubles from the start, I still don't know for sure. But, everything seems to be functioning correctly now at least and since my computer has lasted this long without hard drive failures, maybe it will be ok. It's possible that I somehow caused the errors while I was fiddling around on the computer trying to fix idvd and iTunes. Hope this is helpful to somebody, someday. I did gain a lot of advice from various forums on the web and found many people having one or more of the issues I was running into, so I thought I should record my process here for others as well.

  • I am attempting to convert 8mm video cassettes to dvd using a video cassette player, elgato video capture with rca/usb connections to the mac, editing in imovie and burning on idvd. The picture quality is awful. What can I do?????

    I am attempting to convert 8mm video cassettes to dvd using a video cassette player, elgato video capture with rca/usb connections to the mac then editing in imovie and burning dvd-r using idvd. The picture quality is awful. What can I do??????

    At what point is the video quality bad?  Is it bad on capture?  I would recommend using an s-video 1394 firewire converter instead.  They capture the video at a higher bit rate.  If you have a lot of 8mm tapes to capture, invest in a stand alone DVD recorder.  They capture and compress in one shot.  If you need to rip it back from the DVD into iMovie again, I would recommend using DVDxDV.

  • IPhoto show transfered and burned with iDVD will not play

    Using iLife 6 - I have 425 photos in iPhoto edited and set to run 3 seconds with dissolves. Transfered to iDVD and created menue and sound from iTunes. The show appears to run fine in preview. However, when I burn the disk it will not run on a DVD player. It runs for a while and then studders or stops. Will sometimes start back up and then stop again. I have tried the following:
    Have reduced all of the photos from origonal 4 to 5 MB down to 200 - 400 KB
    Have tried 3 different types of master media.
    Have tried 4 different DVD players. It plays best on my expensive Pioneer PRV
    9200 but still has some small problems and studdering.
    G5   Mac OS X (10.4.5)  

    Is there any way to change the burn speed and settings in iDVD?
    If you create a disk image, you can use Toast to burn and control speed to 4X or slower.
    File/Save As Disc Image...
    http://docs.info.apple.com/article.html?artnum=164927
    This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
    There are variations to this process based on which OS X you are using...
    Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. Then click the Burn button.
    -->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
    Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
    http://docs.info.apple.com/article.html?artnum=93006

  • FCP export in Blackmagic format.

    I am currently using FCP 7. The video source is from Blackmagic converters(OpenGear Converters). Video file has 3 mono audio tracks with 3 different languages. I need to do some editing like adding title and stuff like that on final cut (this part is not important). At the end I want to export the file same as I captured from Blackmagic converters (OpenGear Converters), so that I can upload it though a video system which will automatic generate the video file into 3 single file with different languages. The cloest I can get is missing “Audio channels: 4” on the info. The system is failed to export in this version. I think I need to declarethat the audio has 4 channels in order to let the system do the auto run. Please help! I am wondering is that something I can set in the Composser or Soundtrack Pro? in order to export a video with 4 mono sound tracks.
    Thanks!
    Joe

    First, what is your sequence ntsc or pal? ntsc is the standard for north america. and pal is the rest of the world (for the most part). most pal players will play ntsc disks without a problem. and computers will play either pal or ntsc.
    You need to describe your workflow from shooting, thru capture, and editing. If you start with ntsc, stay with ntsc. If you start with pal, stay with pal. If you have pal material and need to create an ntsc dvd or vice-versa you need to do a standards conversion to your finished sequence.

  • Pal to NTSC conversion and burning disk

    I had problems burning a disk with ilife 5.0, so I bought 6.0. I make a movie using only one picture using iMovie HD. I shared this movie with iDVD and tried to burn a disk. An error message can up saying "are we trying to burn a PAL movie with a NTSC disk? When I procede anyway the disk won't burn. I looked in help to convert a PAL movie to a NTSC movie. When I went through this procedure, I got a disk icon as a Quick time movie. I couldn't burn this using disk utility. What is going on here. Wy does the new iLife 6.0 make a PAL movie. I didn't tell it to do so. Does iLife come programmed to make PAL movies, which I understand are the Euorpean format. I used to make movies just fine when I first got iLife 5.0 so I know how to use the program. Any ideas? Thanks in advance.

    NTSC is the standard deployed in the USA and some other countries (post war countries relying on US for reconstruction). While the "rest of the world" looked for much-needed enhancement to NTSC, which gave birth to PAL and SECAM. Only NTSC and PAL is used for DVDs.
    NTSC and PAL are television (chroma) standards. TV sets strongly rely on their power source for image synchronization. US countries use 110V/60Hz, while the rest of the world rely on (the more efficient) 220V/50Hz (multiplying by 2 the voltage divides by 4 the power rating of appliances). So, frame rate is 60Hz on one side and 50Hz on the other. PAL develops 100 more horizontal lines than NTSC (TV sets). Because of "interlacing" (to artificially reduce screen flicker), video source frame rate is 25 or 30.
    In the end, converting PAL to NTSC and vice-versa is a very tough job: missing frames are "missing" and must be extrapolated. Extraneous frames needs to be dropped. Same for missing/extra lines. This is professionally done by using complex equipment capable of doing these interpolations equally balanced over the timeframes.
    Because of the size of the US market, it is almost impossible to find multi-standard compatible equipments (TV sets, DVD players) in the US. While in Europe the huge majority of equipment are tri-standard (NTSC, PAL, SECAM), - for the video sources such as DVD players and various tape based recorders - and the TV sets also support the various flavors of these standards for the wireless transmission (sub-carriers, polarization, etc).
    In the end, what is the benefit of a conversion? to send a homemade movie to a friend in a country of different format? Then, using a computer as player can be a good palliative.
    This, as my 2 cents.

  • Export same XDcam format and media menagment

    I finished the project and I want to make a master file of the same format that was recorded. 
    In fcp7 I had the option  Export ... Same format.    How to do Export same format in FCP X?
    How to make arhive project only. As media menagment in FCP7.   So I have 100 GB of videos in the Library, I used about 20 GB in the Project, and want to save the project only with those shots + / - 1sec of each clip.

    Okay, this was bugging me a bit so I went back to project from yesterday and did the following:
    1) exported the last version of the project (with filter applied)
    2) duplicated the sequence, opened each clip (5) and turned off the filter, re-rendered and exported.
    #1 with filters = 452MB, #2 without filters = 535MB.
    Most interesting difference: QT reports #1 has a bit rate of 30.5 Mbps, while #2 has a bit rate of 36.1Mbps. Why the codec "chooses" a different bit rate is odd, but clearly very sensitive to picture content!

Maybe you are looking for