*** FCP exports a stuttering clip for the web - help.

I'm exporting a clip and it stutters at 2 specific points about 2/3 of the way through. This happens in the same spot no matter how often I encode it. I checked the original file in the timeline and there is no stutter hiccup at all.
I've trashed FCP and QT preferences and re-started but the problem still persists. Can anyone suggest how I may solve this? For reference, the clip in question is here: http://www.cloudninecreative.com/trailers/adtrailer.html
Thanks in advance!

First off...WOW DUDE! That is an AMAZING wedding video! I am really impressed. Holy cow...I wish mine looked that good. Well, mine was filmed by Uncle Larry, but let's not go there. I have seen my friends wedding video and...I have worked on wedding videos...and...they don't compare. Nice.
Second off...what camera did you use to get such GREAT slow motion? HVX? GREAT slow motion, good colors. I am really impressed. Great camera work on that.
We film in HDV with a Sony HVR-Z1U. Nearly every frame is colour-corrected and some have filters applied. Shot with a hand-held steadicam.
Third off...and this is a doozy...where did you get that music? Sounds like a movie soundtrack. We are all big on paying for your music, cause it will sting you. Just curious.
The music is from a film trailer, but just meant for the couple. I know the music thing is a big issue, you just can't get the same impact with royalty-free music IMO.
Now...the stutter...is that when they are leaving the church? You see the low angle of the steeple, then a tilt down that cuts and repeats itself, THEN you cut to the street? that's odd...and you say it is not on the master...
Trash renders...re-render and try again?
Thanks Shane! I didn't think of trashing the render files - good idea!
(GOOD wedding video dude...you are setting the bar pretty high with that one.)
Shane

Similar Messages

Exporting FCP 16:9 to QT for the web in 16:9?

Hello everyone,
I recently began doing my projects in 16:9 mode. I shoot them with my GL2's in 16:9, then capture to FCP as usual. FCP then automatically recognizes the 16:9 footage and adjusts everything perfectly for me. I figured out how to get the footage to DVDSP by 'forcing letterbox'. This plays the true 16:9 footage on a widescreen TV perfectly.
Now, I've come to another bridge that I can't seem to cross... that is... exporting the video to QT for the web in 16:9. I did a lot of searching here and all of the topics related to this did not help me at all. So, what I'm going to do is explain what I used to do when I shot in 4:3 mode:
1. In FCP... File>Export>QT Conversion
2. Format: QT Movie> Options
3. Settings> Sorenson Video 3
4. Frame Rate>15
5. Key Frames: Every 150 frames
6. Compressor> Medium
7. Data Rate: Automatic
8. OK
9. Sound>Settings>Mpeg-4 Audio, 16bit, Stereo
10. OK
11. Prepare for Internet Streaming> Fast Start
12. OK
13. SAVE
This usually turns a full sized 5 minute clip into a nice little presentation for the web no larger than 35 or so MB's. You can see a boat load of files like that on my website at (www.buerhausdesign.com).
Now, what I want to do is get a similar sized video for the web, only in 16:9 as I'm now shooting and editing in 16:9.
Does anyone have step-by-step instructions on how to do this? I know it's possible as I see movie trailors in 16:9 all the time in QT.
Any help would be appreciated:)
Matt

Nope, tried all of that. It stretches the image way beyond 16:9. Currently, if I export as a 4:3 file, the widescreen displays correctly, but I get two black bars at the top and bottom of the frame. Manually sizing to a 16:9 size, to say 720x404, stretches everything... including the unwanted black bars.
When I export to DVDSP, the black bars go away when I 'force letterbox'. There's gotta be a way to get it to work in QT.

Clip for the web

Hi. A client has asked us to create a clip suitable for the web for a project we recently edited for them. What the best programme to use to this? I heard Mpeg Steamclip is good but there is sooo many settings. The clip was edited in FCP 7 its 5 minutes longs. Client simply wants the file so they can upload to their site. could someone please advise settings which result in the clip loading pretty fast while keeping the quality good.
Thanks.

Any serious converter will have many settings for your indulgence. Before you do any conversions ask your client of the size he requires. You can use compressor to convert to H264, or a load of other programmes such as MPEG Streamclip. The problem with other converters is that they cost money whereas compressor is part of FCS and MPEG Streamclip is free.

Exporting widescreen anamorphic video for the web

I have a project in fce which is filmed in widescreen anamorphic at 720, 576 the setup in fce is dv-pal anamorphic and anamorphic is checked in item properties. When I export using quicktime using h.264 encoder it shows at as widescreen in the preview but when I open it after export it is squashed. I know that is because it is anamorphic but how can i export for the web and get the correct image? If I was doing full scale I could just change the resolution from 720 to 1024 but what if I want to do lower resoultion is there a better way? Thanks.

WMA is Windows Media Audio. I think what you meant is WMV (Windows Media Video). To export to that format on a Mac you'll need Flip4ac, available from www.flip4mac.com Once you've installed it, it adds the WMV and WMA export option to QT and other apps such as Sorenson Squeeze.
-DH

Exporting a masked object for the web

Hi everyone,
I've created a pattern tile in Illustrator and need to export it for the web. The problem is that when I do this, the area that is masked out is showing up in the the save for web dialogue box as a blank transparent area.
Anyone know how to avoid this so that only the pattern tile itself is saved for web?
Appreciate any help.

Hi,
I tried filling a square with a pattern fill then expanding it but this doesn't work because the pattern definition is no longer accurate, ie. I need to use the original pattern object in order for it to tile correctly.
I also tried the two previous suggestions, ie. defining an artboard the size of the pattern and then exporting and also tried defining a slice. Both of these methods failed because it seems illustrator is adding an extra 2 pixels to the overall pattern which destroys the tiling effect.
The only way I could get it to work was to copy the pattern tile, paste it into Photoshop and then trim off 2 pixels from all four sides. This seems like an awful lot of work though. I wish there was an easier way.
By the way I'm using CS4.

How best to export a themed slideshow for the web.

I want to export my scrapbook themed slide-show such that I get the best size/quality of movie for use on a web-page. What export settings should I used to accomplish this?
- CDM

All good questions. Should have provided that information up front.
This is for broadband users that have something in the region of aroun 2Mb donwload speed connections.
I already managed this at some point in the past (http://www.ChrisAndSandyMorgan.com) but no longer have the files that I uploaded to inspect and capture the settings from.
- CDM

Compressing for the web[help]

hello is any body there that can tell me why when i try to compress with the .h624 i think it is, a 37 minutes short, it takes a very long time, to compress 15minutes it took 5 hours, now when i checked it said that it needed 35!! more hours!!! sould i up grade? i was told this problem is because my final cut is runing in "ROSSETA"
i have runin in it academic final cut pro 5.0.0
i have a macbook pro .2.16ghz intel core duo
1 gb memory
I Monrroy
MacBook Pro Mac OS X (10.4.8) G4 tower

I would suggest asking this in the Final Cut pro forum.

Compressing video for the web

I have had people ask me to make a short 30 clip for the web say of some of there sporting shots, what is the best way to go about knowing what kind of compression you use and what type of file is best.

Bill bill bill... billy B... Will!!! Willy.... BillyWill...
Search is your friend. This comes up three to two thousand times a week.
Don't expect me to spoon feed you... but export it as a quicktime conversion and use one of the presets.
I really like Broadband High... will be in h.264 and will be roughly 3 megs a minute-- will look a whole lot better than the demo reel you have up on your site right now.
Good luck,
CaptM

Best way to encode Quicktime file for the web?

Hello all and thanks in advance for your help with this problem.
I need to know the best way to encode a quicktime clip for the web.
This was my first try:
http://www.denmothers.net/trailer-big.htm
It works fine in safari, firefox, and ie for mac, provided they have quicktime 6 or later but it seems not to work on pc browsers. The file is encoded as an .mp4 using compressor and played with the browser's quicktime plugin. I've read that encoding files as a .mov provides greater compatibility but when i compress it as a .mov using the mpeg4 codec the file sizes are huge and when i use the photo-jpeg codec the quality is poor. h.264 looks great and has low file sizes but then my viewers have to have quicktime 7 which i think is too limiting because many will have older computers.
How should I encode my file such that it works best across browsers and platforms and has the highest quality at the lowest size?
Best,
Keegan

If you open an .mp4 file in quicktime pro you can then select File->Save-As and you are presented with two options:
Save as self-contained: This will create a .mov that is the same size as your .mp4 but is playable on any system w/ QuickTime 6 and the Mpeg-4 codec. (PC's included).
Save as reference: This will create a small (>500kb) file that will simply reference the .mp4. If they're in the same folder the .mov created will open the .mp4. Without the .mp4 the .mov in this case is useless.
For what you're trying to do I suggest going with self-contained.

Is there a way to stop colors flattening when encoding for the web and DVD

Hi. I am in post prod on my first feature film, which has some great horror dream sequences, lit red and green in the Mario Bava tradition. They really do look stunning in the original footage, with highly saturated crisp colors (We had a really great cinematographer) But when I try to create clips for the web, the colors flatten a lot. They look better on my i-phone than my Lcd computer monitor. doing DVD outputs also looses something, but less so. It depends on the playback equip. My plasma TV and upscaling dvd player make them look fairly good. The footage is progressive scan 25 frames per sec HD. (16:9 cropped to 2:35:1) Does anyone know the optimum settings for web encoding have just used 310x710 pixels using H264 compressor at 3000 kbts per sec

Hi
YEs you can read the ALE model data.
    CALL FUNCTION 'OWN_LOGICAL_SYSTEM_GET'
      IMPORTING
        own_logical_system             = sending_system
      EXCEPTIONS
        own_logical_system_not_defined = 01.
    SELECT   * FROM tbd05 INTO TABLE i_tbd05
    WHERE    sndsystem = sending_system
    AND      mestyp     = message_type.
Regards,
Vijay V

Exporting Clipped images for the Web... CONFUSED! ? Help ..? AI CS3

Hi folks,
I don't use Illustrator as much as I'd like, since my workflow is mostly on
the web, but I'm finding it nearly impossible to export images I receive
from print designers for web use. Many of these images are EPS or AI.
They are clipped images, which is great, BUT when I try to Save for the Web,
the error comes back that they are too large for the web and may crash AI.
OR if I export to PNG or PSD, the files lose their transparency and I have
to extract them manually from the white backgrounds, which defeats the whole
purpose. I have tried opening in Fireworks and Photoshop with the same
result. I've changed the originals from CMYK to RGB, but it doesn't help.
Plus the images export with a huge crop area instead of just the image
itself.
I'd really like to be able to use AI, but I'm finding this situation
unworkable. I am sure I'm missing something simple , but I'd appreciate any
help greatly!
Thanks
Jeff
~~~~~~~~~~~~
Jefferis Peterson, Pres.
Web Design and Marketing
http://www.PetersonSales.com

Thanks for your help Jean et al.
I only use Illustrator occasionally and when I have to. Not because I don't
like the idea, but I'm almost completely web oriented and I find its layout
is not as instinctive and smooth as Fireworks, and I use Photoshop for
original layered images. The problem comes when I get a file from a printer
who uses Quark and knows nothing about web prep and exporting for other
uses. He couldn't export a layered file for some reason even though he had
the backgrounds layered for print work.
You are right, I've opened the tiff and eps docs from the printer before and
played with them in AI, and saved them to ai native formats. I *thought* the
eps files were created in ai by the printer, because they had the clipping
paths and artboards. Obviously they were not. They had just opened with the
default 14400 artboard which is why I thought they had been "set." So when I
set the new 30x30 custom, I started seeing these files with a new
artboard...
So, in sum, I first tried to use these files in Photoshop, but they open
as flat files and the clipping paths are lost. Only by experimenting with
ai, did I find the files had clipping paths. I guess what threw me was that
ai could extract clipping paths from eps that Photoshop could not.
Jeff
~~~~~~~~~~~~
Jefferis Peterson, Pres.
Web Design and Marketing
http://www.PetersonSales.com

HDV Aspect Ratio and Exporting For the Web

INTRODUCTION
I am trying to export an HDV video for the first time and have managed to confuse myself. I want to upload it to blip.tv and they transcoded videos into Flash with 4:3 aspect ratio. But more than that, I want to understand how this all works so I don't have to guess about the settings that will give me what I want.
BACKGROUND DATA
4/3 is 1.333...
16/9 is 1.777...
1440/1080 is 1.333... (if the pixels are square)
1920/1080 is 1.777... (if the pixels are square)
In FCP my clip format says:
Frame Size: 1440 x 1080
Pixel Aspect: HD (1440 x 1080) (Does this mean the pixels are 1.333... times wider than it is high?)
EXPORT USING QUICKTIME CONVERSION
When I go to export this clip using Quicktime Conversion under the Options... Size... dialog and look at the Dimensions dropdown, (I assume this is the dimensions of the exported video. Is that correct?)
Some of the settings are (the settings are in quotes, my notes are in parentheses.):
"HD 1440 x 1080 16:9" (if pixels are square this is 4/3)
"HD 1920 X 1080 16:9" (if pixels are square this is 16/9)
So both of these settings claim to be 16:9 but they both can't be true unless they have different pixel aspect ratios (which I find hard to believe). This makes me think I don't really know what they mean when they notate something as 16:9. Can anyone give a definition that will help me here?
EXPORTING FOR THE WEB
Using FCS2, what settings should I use to export this clip undistorted for the web (with letterbox if needed)?
Thanks for the help,
Rob:-]

What I find with HDV 16x9 1440x1080 footage, is that when you output for the web you have to hard code the size you want the result to be. 320x180 or 640x360 for example scale things nicely. If you want bigger, just do the math.
I don't know why but whenever I select a predefined output size, it always screws it up (I don't work with 4:3 ever, so I'm speaking only of 16x9). So I always enter the size I want.
And as far as Compressor 3, I really can't get that to set the size I want correctly either. Mostly its due to me being lazy and not wanting to spend a year reading the Compressor manual. A package that should basically have the easiest interface known to man is now so complicated that unless I have to hand-holding tutorial, or get to drag/drop one of their presets, I end up screwing things up with it. Not to mention that you get to wait for hours just to see how you screwed up the settings of your output.

Exporting for the Web and mobile devices

This question was posted in response to the following article: http://help.adobe.com/en_US/premierepro/cs/using/WS1c9bc5c2e465a58a91cf0b1038518aef7-7c7da .html

This a quick-start tutorial from Clay Asbury for quickly getting up to speed with Premiere Pro (CS4, 5, 5.5)
Import, Edit, & Exporting for the web are covered in this 13 minute tutorial.
http://www.claygasbury.com/2011/05/premiere-basic-tutorial-import-edit-export/

Exporting video for the web for windows Media player

What software can i use to compress an AVI file for the web. The finished product will be WMA file.

WMA is Windows Media Audio. I think what you meant is WMV (Windows Media Video). To export to that format on a Mac you'll need Flip4ac, available from www.flip4mac.com Once you've installed it, it adds the WMV and WMA export option to QT and other apps such as Sorenson Squeeze.
-DH

Export for the Web and File Naming : Batch problem in Photoshop CC

Is it possible to use "File Naming" when you are using in a batch "Save for the Web" export ?
What I want to do:
I have images that I need to resize, crop and rename (change "filename.jpg" to "filename_850x490.jpg" and make an optimisation for the web
I want to create an action that I can use in a batch
What is working :
I can use my action (resize, crop, save) and use file renaming option if I use "save as" options
I can use my action (resize, crop, save for the web ...) but the file renaming option are not use at the export,
So I have to create two actions (one for resize, crop and rename and an other to compress images with "save for the web"
==> What's wrong with "File rename" and "save for the web"?
Thank You for support !
My Environement :
Photoshop CC : last update
OS : Windows 8 Entreprise - 64 bits
Proc : Intel Xeon CPU E5 3.00 GHz - Ram : 8 GB - GPU : AMD FirePro V5900 (FireGL V)

Probably a lot easier if you use the Image Processor Pro script
(part of Dr. Brown’s Services 2.3.1)
http://www.russellbrown.com/scripts.html

*** FCP exports a stuttering clip for the web - help.

Similar Messages

Maybe you are looking for