FCP-firewire-P2 GEAR-sdi-Panny Monitor-Setup

Here's my specs: Dual 2ghz G5/10.4.11/QTime 7.5.5/Final Cut Studio 2 (all recently installed)/P2 Gear/BT-LH1700/DVCPRO HD footage shot on HVX using 720/24pn with the FCP timeline to match and the P2 gear settings matched up in the SYS Format menu setting
Goal: Monitor FCP output via firewire to P2 Gear and to Panny monitor via sdi
What I've tried: All the basics- Different cables, different ports, checking system profiler for Firewire connection to Gear (it's connected), making sure the gear is connected and turned on prior to opening FCP (and even partially opening FCP to the A/V devices window where you must have the devices connected and recognized to be able to pass (the spot where you click check again)), in FCP clicking on the all frames, view, system settings, etc...
Theory: There is some setting in the P2 gear I'm missing. I've scoured the manual, internet (shane ross' blog makes it seem simple, and barry's article on the "gear" mentions it's possible) and endlessly adjusted the settings whether it's 1394 Host, 1394 Device, neither, all the different TC options. (Note, the P2 gear plays clips off of P2 cards on the monitor with no problems.)
Thanks for any help or input, MM

Is your method working simply because you've dropped pn footage into a 30p timeline?
I don't have a 3rd party card right now so I have to monitor via firewire. I like the look of 24pn (as recorded on the HVX200) so the only way I can monitor is putting it into a 30p timeline. It does some funny stuff when paused but plays fine.
Once everything is cool, I simply copy all the material from the 30p timeline to a 24p when it's time to output.
x

Similar Messages

Bad playback with 2-monitor setup

I've got a working 2-monitor setup connected through my ATI X1900 (a Viewsonic A91f+ and a 50" Sony VGA LCD). When I choose to view playback through the Sony (All frames, Digital Cinema Desktop Preview-any setting), the preview only shows the frame where the playback head is parked. If I try to play, I only hear the sound, and the picture stays frozen. If I drag the playback head through the clip or sequence, everything stays caught up. But realtime playback won't work.
All software is current, for FCP 5.1.2. What am I doing wrong?

and your canvas and viewer windows are set to "fit to window"...
N

Best dual monitor setup (or should I say best value)

Hello All,
As I've shared before, I run a non-profit, but have a background in film. I purchased all of the necessary equipment to shoot and edit our own mini documentaries on our work. I've been doing it for about 6 months now. The results are extremely powerful, and the work is tremendously fulfilling.
So, with each successful piece that I produce, I reward myself with a piece of equipment that will make future productions more enjoyable. Examples have been a Pelican Case, mini hard drive, microphone, etc.
I'm now interested in setting up with two monitors. Right now I'm using a MacBook Pro, and a 19" monitor. Although it works, it's kind of funky. I'd like to get two monitors and am seeking a recommendation. I suppose I should also purchase a full-size keyboard at this point as well.
Any recommendations for the monitor setup?
Thanks.
DG

Please forgive the lack of accurate computer language:
I use my MacBook Pro and a monitor connected via the white cable. I then have a PC connected the the same monitor, using the blue cable from the PC. The monitor I'm using has a button called "Exit". When I press this, I can either have two monitors as part of the Mac setup with FCP, or a single monitor with the PC. The MacBook and the monitor have different resolutions, but the way I have it setup for dual monitor work, it's not a problem. The real problem comes in when moving the mouse from MacBook to monitor. As they aren't aligned, it's kind of a pain.
DG

I have 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II. How do I connect? 4000 only has 1 Display Port and 1 DVI. 5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute?

I just bought a 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II. How do I connect? 4000 only has 1 Display Port and 1 DVI. 5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute any work at all? I read where on a PC they would work together, but on a MAC they do not.
I read that Display Port has higher band width than DVI, NEC monitors for best performance they recommend using DIsplay Port.
When I was setting this up I looked at a Nvidia Quadro 4000, unfortunately it was for PC, it had 2 Display Ports, in the Mac version they reduce it to one. I did not think there could be a difference.
Mainly want to use it for CS6 and LR4.
How to proceed???
I do not want to use the Quadro 4000 for both, that would not optimize both monitors, one DP and 1 DVI. Using just the 5770 would work but I do not think the 4000 would be doing anything, and the 5770 has been replaced by the 5870.more bandwidth.
Any ideas, I am a Mac newbie, have not ever tried a Mac Pro, just bought off ebay and now I have these problems.
As a last resort I could sell both and get a 5870. That would work, I'm sure of that, it's just that I wanted the better graphics card.
Thanks,
Bill

The Hatter,
I am a novice at Mac so I read all I can. From what I understand the NEC monitors I bought require Display Port for their maximum performance. The GTX 680 only has DVI outputs. Difference from what I understand is larger bandwidth with the DP.
You said I have the 4000 for CUDA. I am not all that familiar with CUDA and when I do read about it I do not understand it.
A concern I have is, that if I connect the 2 high end NEC monitors via the 5770, using it's 2 Display Ports I would have nothing connected to the 4000. Is the 4000 doing anything with nothing connected? I read where in a PC system the 2 cards would interact but in a Mac system they do not.
Bottom line, as I see it, the 4000 will not be useful at all to me, since I want a dual monitor set-up.
So far the 5870 seems the best choice, higher band width than the 5770, and it has 2 Display Ports to optimize the NEC monitors.
I'm not sure how fine I am splitting hairs, nor do I know how important those hairs are. I am just trying to set up a really fast reliable system that will mainly be used for CS6 and LR4. Those NEC monitors are supposed to be top notch.

External NTSC monitor setup

When I use an external NTSC monitor connected to an Apple DVI to video adaptor then to a Radeon 800XT video card I have many crashes. It seems like these are caused by the External monitor setup. I would to know what sort step up others are using for external video. And what kind of success you are having with them.
Thanks
Ken

I to have had the same problem, in fact, I just posted about it a few days ago. Hopefully Apple's monitoring this forum and looking at the issue. The only solution I've found is to disable the external preview, which is quite frustrating. Just a question have your crashed happened while you're working or when you perform application switching. I've only had problems when I apple-tab to another program and then do the same to get back into Motion.

Dual monitor setup - need laptop on the left

Hi All
I'm running a dual monitor setup - specifically a HP G72 laptop and a widescreen monitor. I use the monitor as the default and sometimes I want to use the Laptop as a secondary screen for watching TV etc. My desktop is Enlightenment, I just changed to it from Gnome. My issue is that I want the laptop to be on the left of the monitor - that's how it is physically positioned - but when I switch the Laptop screen on all my applications shift over to the laptop screen. I've written 2 scripts, attached to hotkeys, one to turn the laptop off and the other to turn the laptop on. The script to turn the laptop on is as follows:
xrandr --output LVDS1 --mode 1600x900 --pos 1600x0 --rotate normal
--output VGA1 --primary --mode 1920x1080 --pos 0x0 --rotate normal --left-of LVDS1
This works fine, applications stay where they should be, except that the physical position is incorrect; VGA1 should be to the right of LVDS1 like this:
xrandr --output LVDS1 --mode 1600x900 --pos 1600x0 --rotate normal
--output VGA1 --primary --mode 1920x1080 --pos 0x0 --rotate normal --right-of LVDS1
However, when I use the second script all of the applications shift to the laptop but at least the physical position is correct. The issue appears to be something to do with laptops, almost as though when it's a laptop the default monitor is forced to be on the left. Has anybody got any suggestions how to get around this issue?
Thanks
Richard

This is due to your window manager treating the two monitors as a larger 'desktop' area - that combined with your specification of the pos=0x0 you are telling it to do this.
If you have only the VGA output on, the top left corner of the VGA monitor is 0x0. If you open a window, and it is placed 10 pixels in and down from the top left, it is at coordinates 10x10 in the x session. Then you turn on the laptop monitor and specify that the top left corner of the laptop monitor should now bo considered 0x0 - but nothing is done to move the windows, so the window with coordinates 10x10 is now near the top left of the laptop monitor.
I see 3 possible ways of acheiving what you want:
1) swap the "pos" parameters in your xrandr commands so that the monitor on the left is always at 0x0 and the one on the right is always at 1920x0 (or whatever). This will leave a large area of available X desktop that is not visible - I don't know how your window manager will treat this. It might try to map windows on the laptop screen space even though that screen is not on. I know openbox is easy to configure where it tries to place windows.
2) Keep the VGA monitor always at 0x0, but place the laptop monitor at a negative offset when you want it on. I don't actually know if X allows negative coordinates like that, but it's worth a shot.
3) Configure your window manager, or use a different window manager, so that it is aware of the two screens and treats them reasonably (e.g. moves windows when the desktop area is changed).
Last edited by Trilby (2014-07-12 12:15:42)

Four monitor setup on 2013 mac pro using old 23" Cinema Displays

My current monitor setup on a 2009 mac pro is four monitors. Three 23" Apple Cinema Displays (aluminum, mid 2000's) and one large Sony HDTV mounted to the wall as a fourth monitor.
I achieve this via 2 Geforce 120 video cards, each with a mini display port and a Dvi port each.
My question is, can I retain this same exact monitor setup on a new 2013 Mac pro cylinder? If so, what adapters will be needed, and do they all plug into the thunderbolt ports?
Hearing all kinds of nightmares about multiple monitor problems with the new MP so want to be sure this will work before I drop big bucks.
Thanks!

Thanks for the quick reply!
For the Tv I'm currently going VGA out of that to a Dvi adapter into the old Mac Pro. The 3 Cinema Displays are all ether direct Dvi to the video card and two I have to use a Dvi to mini display port adapter.
So for the new Mac Pro, assuming I don't use the HDMI port, I would need Dvi to minidisplayport adapters for each of the 3 cinema displays and a VGA to minidisplayport for the TV?
EDIT: And the mini display ports may as well all be active I guess, and they need to plug into the usb bus for power?
Thanks

Maximising Safari on a dual-monitor setup (GUI behaviour in Window XP Pro)

When I maximise Safari on the 2nd monitor of my two-monitor setup, it disappears off-screen (but its icon still remains in the XP taskbar) and I am unable to bring it back into the viewable area. Consequently, I have to close Safari and reopen it to continue.
When I maximise Safari on the 1st monitor it fills the screen as I'd expect.
Windows XP Pro

Confirmed on another Dell D610/Windows XP dual-monitor setup.
However, when I maximise safari on the secondary monitor it still appears on the task bar, enabling me to right-click and Restore the window (whereupon it reappears).
Jon

Dual monitor setup MBA 2013

Hello Everyone,
This is my first post on the Apple Support Community.
Nice to meet al of you!
System information:
Macbook Air medio 2013
Model MacBookAir6,2
Intel Core i7 1,7GHZ
8GB
512GB SSD
I am wondering if it is possible to have a dual monitor setup using the thunderbolt feature daisy-chain.
The configuration i am looking for is:
MBA --> Belkin Thunderbolt™ Express Dock (for using gigabit ethernet) --> Dell U2414H --> Dell U2414H
Specs:
Belkin Thunderbolt™ Express Dock = http://www.belkin.com/us/p/P-F4U055/
Dell U2414H = http://accessories.us.dell.com/sna/productdetail.aspx?c=us&cs=04&l=en&sku=860-BB CG
Do i have a chance this could work?
I'm looking forward to hearing from you all.
Thanks!
Kind regards,
Njamo187

Hello,
I had the same problem with a nVidia GT120 card (2009 Mac Pro standard). OSX wouldn't show the gray screen on the 3090, even when it was connected alone (to the DVI port). Also, the login screen would always revert to the secondary display (connected thru the mini display port to DVI adapter).
After login, all was well.
Now I've solved the problem with an nVidia GTX 285 card. The 3090 is connected to the n.1 DVI port and the secondary display (a 1600x1200 Eizo L997) to the n.2 DVI port, and the Mac Pro boots correctly on the 3090 (gray screen and everything, at full 2560x1600 resolution).
Note that the first time I booted up the Mac after replacing the GT120 with the GTX 285 I had the same problem, and solved it by disconnecting the secondary display and then rebooting with the 3090 alone. Now everything works as it should.
Dont't know if there is a bug somewhere (EFI, maybe) of if the GT120 and your ATI are simply unable to work at full resolution before OSX desktop loading.

Dual monitor setup with seperate resolutions

hey guys!
i currentley run thye latest version of archlinux with the cinnamon desktop environment and an nvidia geforce 7300SE graphics card.
im running a dual monitor setup with one 27" 1920x1080 monitor and one 27" 1024X768 monitor
because they have the same physical size they line up perfectley but because the resolution is different programs/mouse cursor movement doesnt, is there any way (without changing the resolutions) to compensate this effect so that in the eyes of linux/cinnamon the monitors line up so that for example dragging a window goes seamlessley between the 2 monitors.
i HAVE found out the panning option in the nvidia x server settings, but that really isnt what i am looking for...
Last edited by RikSolo (2014-08-04 11:25:02)

A magnifier following the window down to the pixel, zooming to the exact size of 540 pixels the 384 pixels window could create an illusion of just that. It would be highly impractical however, not mention all the hacking time. Even if you would manage to get two screen with different sized icons, so that they match visually, the windows and fonts resizing on the fly, wmctrl might help with windows alone, no their themes (buttons, borders thickness etc.), you would still be left with a visually differently sized mouse cursor. Technically such a feat should be possible, but who is going to code it? Nvidia?
Last edited by emeres (2014-08-04 18:48:59)

Dual monitor setup flashes constantly

I am trying to set up a dual monitor setup with a Lenovo Thinkcentre Edge computer. I reset the BIOS to enable multimonitor support and IGD Active Video. One monitor is plugged into the VGA port. But when I plug the second monitor into the DVI-D port, both monitors flash constantly and the speakers make the sound of a device being disconnected. Unplugging the DVI-D monitor stops the problem on the VGA monitor. I checked the drivers and they are all up to date. Any ideas?

Bad cable?
Disclaimer: While I do work for Lenovo Partner, all my contributions are my personal, non-official and not that of Lenovo or my employer.

Dual monitor setup without using the ADC?

Would it be possible to run a dual monitor setup using a DVI splitter cable from my (2009)Mac Pro?
I've seen some old forums referring to the 2006 models saying that this wouldn't work and instead you'd get the same image on both screens but the newer Mac Pros state they have "Dual-Link DVI ports".
Just wondering whether this means what I think it means and you can connect two monitors via a dual link cable and get essentially, two monitors running independently as opposed to the same thing on both??
Hope it's staightforward and me just being slow.

The GT120 features one Dual Link DVI-I port and one Mini DisplayPort .
The DVI-I is Dual Link capable, and also can be directly adapted to VGA.
Single-Link DVI is a serial interface that carries three data bits in each signaling interval, as well as control signals. In general, Single-Link supports displays up to 1920 wide. Dual Link DVI is the same except that it carries six data bits in each signaling interval, supporting displays over 1920 wide.
DVI screen drawing is very similar to VGA screen drawing, and the data sent are digital "scan lines" left-to-right row data, top-to-bottom with entire screen data sent about every 60 Hertz. Analog VGA signals are sent at the same time on a separate set of pins.
DisplayPort and its Mini variant are inherently a packet interface, but can be coerced to produce a "Dual Mode" signal that approximates Single-Link DVI. Getting Dual-Link DVI or VGA from DisplayPort interface requires a non-trivial converter than contains chips and requires power.
Executive Summary:
If you have one display that is wider than 1920 or VGA, attach to the DVI-I connector with an appropriate cable.
Running a Mini DisplayPort display from the Mini DisplayPort requires only a cable.
Single-Link DVI can be had from the Mini DisplayPort with a cheap adapter.
Dual-Link DVI or VGA requires an expensive Active Powered converter which can cost US$100.

Dual Monitor setup for Mac Mini???

I just bought a VGA Y-cable and split my monitor signal to two monitors. Unfortunatley the same thing is displayed on both screens where as I was looking for an extension to my desktop.
I found this http://www.national-tech.com/catalog/dvisplitter.htm (the top one for $ 146)
I was wondering if I split the signal with a dvi splitter rather than a vga splitter if i could have a dual monitor setup with more screen space...
Thanks,
Paulie
Mac Mini Mac OS X (10.3.9)

This will do it for you: http://shopmatrox.com/usa/products/datasheet.asp?ID=788
ibook g4, mac mini core solo, powermac g4 gigabit ethernet Mac OS X (10.4.5)

Dual monitor setup broken in Leopard

There are numerous problems running an external Cinema Display from a MacBook Pro using Leopard. I've tried with 2 MacBook Pros (one 15", one 17") and 2 different Cinema Displays (24" and 30"). Not to mention everything was fine under Tiger. Both Leopard installations were "clean installs".
1. Closing the lid of the MBP doesn’t remove the screen from Leopard (Or Spaces).
2. When the MBP sleeps with a Display attached it never comes back onto the Display, only the MBP’s LCD.
3. Periodically the MBP refuses to wake when it’s connected to the display.
4. I can no longer use the power button on the Display to sleep/shutdown the MBP.
5. Simply plugging the Display sometimes causes it to wake (while the MBP is closed). In Tiger, I had to have the Power Adapter connected to wake my Sleeping MBP with the lid closed (as stated in the documentation).
Wonder if all this will be fixed in 10.5.1 (hoping)?

Firefox doesn't always play well with a multiple monitor setup and hardware acceleration.
Try to disable hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers

Monitor Profile incorrect on Dual Monitor Setup

Hello,
I've searched the forums and I can't find an answer to my problem. I've read about dual monitor setups in Windows and how to set the defaults and whatnot, but it doesn't seem to fix my problem.
I am running on an nVidia GeForce 8600M GT, Windows 7 x64, Photoshop CS4 x64. I calibrated my main display (Dell Vostro 1700) as well as the attached monitor (ASUS VK246H) using Datacolor Spyder3Elite. Both monitor profiles seem to load just fine. I've also went into Windows' color manager and set the system defaults for each monitor respectively. The problem I'm having is that if I were to load Photoshop on the 2nd monitor, Photoshop only uses the main display's color profile (Vostro 1700) and not the ASUS VK246H profile. What could be going wrong?
Just to clarify, what I mean by "loading PS on the 2nd monitor" is that when I execute Photoshop.exe, the splash screen and main window shows up on the 2nd monitor, not the main monitor (which is what I want).

function(){return A.apply(null,[this].concat($A(arguments)))}
Chris Cox wrote:
What if the image is in between two monitors?
The piece on each display is corrected for the display it is on.
Is it supposed to work that way? Because it doesn't. Not with Photoshop CS5 x64 at least.
As a test I intentionally misconfigured the profile for my Monitor #1 (left) so that it's REALLY OBVIOUS which profile is being used. When set this way, on Monitor #1 red colors will appear pale orange.
An open document, floating in a window:
If COMPLETELY displayed on Monitor #1, Photoshop will use the Monitor #1 profile.
If even 1 pixel of the edge of the image is moved onto Monitor #2, it will use the Monitor #2 profile on the entire image.
See for yourself:
-Noel

FCP-firewire-P2 GEAR-sdi-Panny Monitor-Setup

Similar Messages

Maybe you are looking for