Fcp gone back wards not capturing

ive gone backwards cant capture to fcp 6 dont know what has gone wrong. on imac, firewire, canopus 110 playing out of a Panasonic dvc pro deck no time code playing apart from what is displayed on vtr just want to play it in how?????

As noted in your thread from 3 minutes ago ....
http://discussions.apple.com/thread.jspa?messageID=10700479#10700479

Similar Messages

My FCP 5 will not capture video any more. How do I get it back

I have a 2005 G5 operating on version 10.5.7. I have *FCP 5*. I do a lot of video editing and have been using this system since 2005. I have *4 gig Ram*. Suddenly it won't capture and when I try to go into that mode I get a message: *UNABLE TO INITIALIZE VIDEO DECK*. My cameras are a new *Canon XH-A1S and a older Canon XH-A1*, they both won't initialize. So I uninstalled all FCP software and reloaded only to get the same message. I now have 20 hours of tape waiting to be edited.
*+_PLEASE HELP_+*

Did it. No luck, However while repairing my permissions four of them came up: Warning: SUID file "System/Library/Filesystems/AppleShare/afpLoad" has been modified and will not be repaired.
There's one for "System/Library/PrivateFrameworks/DiscManagement etc and "sbin/umount" and "usr/bin/quota" On all of the other permissions it says they "differ". Anyway it didn't help and I did it to my two internal hard drives.
iMovie will upload and control my camera but I'm capturing much of it in electric green and pink. Boy am I confused. It's not like I'm a novice, I've been doing this for years. This is driving me nuts. I'm worried if I were to purchase a new FCP it still wouldn't capture (not that I could afford it)

The newest version of firefox is NOT STABLE. I have gone back to Firefox 3.0.5, and that works fine. FIX IT

I have a Macbook- I'm running OSX version 10.5.8. Previous versions of firefox have always worked fine. I downloaded the newest version of firefox, and have had all sorts of problems with it. After about 6 weeks of struggling with it, I have gone back to version 3.0.5. I know it's an earlier version, but the performance is way better. Windows and tabs open quickly, there are no loading problems on any sites, and other browsers work fine now, too. I run safari and google chrome also. I was almost at the point where I was going to pass on firefox altogether. In my opinion, the newest version is NOT STABLE and unless you fix the problems, I will not use it. This was a terrible experience and I will not try a new version right now. I'm just happy that I have a stable version of firefox again. And by the way, the older version is way faster loading pages, too.

Going all the way back to Firefox 3.0.5 is shear foolishness, it is 14 security versions behind the last 3.0.19 release. And that version is missing at least a dozen security updates that were applied to the 3.5 and 3.6 versions after support for 3.0.x ended.
If you are not happy with Firefox 4, you should have installed Firefox 3.6.17. That is very similar to the 3.0 and has all the security fixes that have been released since support for Firefox 3.0.x ended last year.

My iphone has been water damaged and in the mean time ive gone back to using my old phone. But i need to get all the contacts from my iphone i had synced to my laptop, but i don't know where to find them and im not sure if ive backed them up to anything!

my iphone has been water damaged and in the mean time ive gone back to using my old phone. But i need to get all the contacts from my iphone i had synced to my laptop, but i don't know where to find them and im not sure if ive backed them up to anything!

If your contacts are synced to your computer then they are in the supported app you are syncing with.
When you set up syncing of contacts on your device, which application did you select?

I updated my iPod Touch to 6.0.1. after much prompting. Now my music is gone! (along with apps, photos and podcasts). After syncing a bunch of times some of it came back, but not all of it. How odd is that? How can I get my music back on it??

I updated my iPod Touch to 6.0.1. -- after much prompting from iTunes. Now my music is GONE (along with apps, photos and podcasts). After syncing a bunch of times some of it came back, but not all of it. How odd is that? How can I get my music back?? I'm really bummed! Everything shows in iTunes, but it's not synching right. So glad I updated. NOT.

Go to iTunea>Preferences>Devices and see if there is a backupright at the time you did the update. Then try restoring from that backup. If the apps are in your iTunes library, any app data will be restored to the iPod.
When restoring from an iOS 4 (or later) backup, if the device had a passcode set, iTunes will ask if you want to set a passcode (and remind you that you had protected your device with a passcode). iTunes will not ask you to set a passcode when restoring from iOS 3.x and prior backups.
Therefore, remembe the passcode that you enter this time.
It appears that if you restore from a backup, that backup is not subseqyently overwritten by the next backup.

After recent QuickTime updates fcp and QuickTime will not open .mov files captured on my FS-H200. Iran

After recent QuickTime updates fcp and QuickTime will not open .mov files captured on my FS-H200. I put this onthe quick time thread and they sent me here.

and NEVER do a software update unless you've got a clone of your startup drive so you can restore your system to it's working state if something goes wrong.
https://discussions.apple.com/docs/DOC-2494

HT200166 I have a Canon XL2 that will not capture video properly in fcp 10, where it does capture properly in fcp6 and 7. How can I "fix" fcp 10 to do this correctly?

My Canon XL2 (1394/firewire 400) will not capture correctly in fcp10, but it did when I had fcp 7 on the same computer. Is there a software fix that will allow me to use the XL2 with this program?

I just want to get this clear.
With FCP 7 and earlier you could capture a whole tape in one continuous 60 minute long clip.
FCP X cannot do that. It is designed to split the tape into its individual clips, however long they may be.
Are you saying that when you try to capture clips of 10 seconds or so, it only captures the first 4 seconds?
All I can suggest is that you trash the preferences with this free app.
Many weird things happen as a result of corrupt preferences which can create a vast range of different symptoms, so whenever FCP X stops working properly in any way, trashing the preferences should be the first thing you do using this free app.
http://www.digitalrebellion.com/prefman/
Shut down FCP X, open PreferenceManager and in the window that appears:-
1. Ensure that only FCP X is selected.
2. Click Trash
The job is done instantly and you can re-open FCP X.
There is absolutely no danger in trashing preferences and you can do it as often as you like.
The preferences are kept separately from FCP X and if there aren't any when FCP X opens it automatically creates new ones . . . instantly.

Had to restore my ipod most apps have gone back on no probs but three are saying they are not compatible any suggestions please

had to restore my ipod, most apps have gone back on with no probs but three of them saying incompatible can anyone help please

Hi Skydiver119
Thank you so much for taking the time to reply to my problem.
Yes the purchases were made though my apple id.
I have looked at a few other questions on this topic and I have read that the app data is stored in the backup file but the apps themselves need to be synced back onto the ipad. Someome has mentioned right clicking on sync my ipad but I don't know where to find that to right click on!! Lol.
Again, I really appreciate your time and if by any chance you know where I can 'right click' I would really appreciate you letting me know as I can't get my ipad to sync with my pc at all, although it is being picked up in itunes and it has backed up to itunes okay. GGrrr. Maybe I have something wrong in the settings which is not making them compatible?

HT201210 feeling a little lost. i was updating to new phone software now phone has gone back to new mode. it recognises my phone but wont allow me to ststem backup from itunes as it does not like the passwords i use as it says system restore already done

having problems with passwords since i upgraded software on itunes as phone gone back to configure mode but wont allow to restore from back up in itunes as it does not like passwords i use. any ideas to solve?

unhappy@apple wrote:
but t say's that it will delet all the my stuff i have on their, can i get some other way?
Not if it is in Recovery mode.
-> http://support.apple.com/kb/HT1808
You can restore from backup.
-> http://support.apple.com/kb/HT1766

HT5457 I have an iphone 3Gs, it was on contract from O2 which is now terminated. I have had it unlocked by O2 and have tried updating it to the current software via Itunes. It seems to have gone back to factory settings and not its telling me it cannot ac

Hello
I have an iphone 3Gs, no longer on contract and unlocked by network provider. I've tried updating the software and it has gone back to factory settings, but it's telling me that it cannot activate the phone due to activation server is unavailable. Is there anything I can do to get the phone working again?

Did you get the 'Congratulations. Your iPhone is now unlocked." message?
Was your iPhone hacked or jailbroken prior to the unlock attempt?
Does the app Cydia appear on your iPhone?

Can not capture from Sony HDV 1080i (recording in 60i)

Hello
We are trying to capture from the above camera to a Mac Dual G5. We are using FinalCutPro 5.1.2. We are using a FireWire 400 cable to connect to the front of the computer (have also tryed back of Cinema Display). The footage was captured in HDV1080/60i, and we have tried the corresponding formats in Easy Setup (Basic, standard, Apple Intermediate).
The problem: we can control the camera from the Log and Capture windows, but when starting capture, no data is coming in, and the program therefor gives up after a few seconds (displaying a no data error message).
We have tried Batch and Now capture. We can log clips, and get the correct time code, but can not capture those clips due to the no data problem.

This is a good workaround for curing your camera recognition problem with FCP (if that's what it is):
First, check that your Easy Setup / Timeline / Camera or Deck Settings are all exactly the same, then making sure your camera or deck is in VTR mode, try to capture again.
FCP uses a different form of QT than iMovie for capturing, so if the camera works in iMovie (or if it's listed in System Profiler) but not FCP, it obviously means your Mac can see the VTR but FCP can't, so you need to do this QuickTime fix.
http://docs.info.apple.com/article.html?artnum=301852
Follow the instructions carefully and you should have things running in no time - it's quite safe but you must Trash the Receipts AND re-install QT from the link provided.
If the Camera / Deck isn't recognised by iMovie or System Profiler, try resetting the Firewire Bus . . . Turn off the Mac and disconnect the power and all Firewire cables. Leave it for 30 mins then connect back up.
Still not working? Try a different Firewire cable.
Failing all this, try resetting the PMU (Power Management Unit). The method varies from machine to machine, so visit the Apple site and search for it in support.
Don't use iMovie for capturing - it doesn't give you a timecode and that's very important.
Let us know how you get on!
Andy
Quad 8GB. 250+500 HDs. G-Raid 1TB. NORTON. FCP 5.1.2. QT 7.1.3. Sony HVR Z1E Mac OS X (10.4.7)
"I've taught you all I know, and still you know nothing".

Will there be a fix for Firefox's problems with Hotmail. I have gone back to 3.5.9 but mostly I am disappointed by the lack of action on this serious problem where a major and critical feature of a major international website is unavailable in the Firefox

Will there be a fix for Firefox's problems with Hotmail. I have gone back to 3.5.9 but mostly I am disappointed by the lack of action on this serious problem where a major and critical feature of a major international website is unavailable in the Firefox browser.
== URL of affected sites ==
http://www.hotmail.com

We've reached out to the Hotmail team and they've determined that this is a bug in their code. (It was masked by a timing issue in 3.5 that was fixed in 3.6.) We've worked with them to develop a fix but they may not have deployed it yet.

Since upgrading to Firefox 5, I can no longer browse for attachments in AOL Webmail, and every time I open Firefox, it asks me if Mozilla can make changes to my hard drive. I've gone back to Internet Explorer.

I upgraded to the latest version of Mozilla Firefox and ever since then, every time I open Firefox it asks me if I want to allow Mozilla to make changes to my hard drive. I have to answer "Yes" or else it won't open Firefox. Then when I open my AOL Webmail and try to browse for an attachment, it freezes up the browser window and I have to open the Task Manager to close Firefox. I have now gone back to Internet Explorer which does not have either one of these problems.

Maybe just corrupted Disk Utility preferences ...
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Preferences/com.apple.DiskUtility.plist
Click Go then move the com.apple.DiskUtility.plist file to the Trash.
Restart your Mac then try creating a .dmg file.

BED is not capturing in the J1IIN

Dear Experts,
I have created commercial invoice ,in which i have entered only BED (Condition type JMAN) manually (Rest of the duties like Cess and Ecess will appear automatically)then i created excise invoice with the help of J1IIN, while creating excise invoice manually entered BED is not capturing and not generating accounting entry also for BED but the other duties (Cess Ecess) is capturing properly in the excise invoice and entries also generating.
i have check the other commercial document also, wherever we entered BED manually the same problem we are facing and if BED is coming automatically, where we are not facing the problem.
So please help me to resolve the issue urgently
Shibu

Sir,
,i have gone through the path as you suggested, where JMAN is not maintained. the thing is that we are not able to maintain JMAN in Tax Defualt information because we are entering occasionally (JMAN ) manual excise duty. mostly the excise duty is coming from preceding document. if i change the JEXP and maintain JMAN in Tax Defualt Information, i hope i will face problem if BED is coming from preceding document automatically, in that case i have to change again the JEXP instead of JMAN.
Please give me help for resolving the isse
Shibu Chandran

Can not capture

Upgraded Premiere Pro, Have bought the new mac computer. Using a Canon DV camera, and can not capture any footage from my DV tapes. Have tried everything!!! Premiere just say Capture Device Offline,. Read through many threads and have got no idea how to fix. Help me Please... I just bought this MAC and now its useless if i can't use it to edit
Even tried all the steps on the web bpage, i do not have a firewire, the USB port i use to plug in are through an AV device (yellow, red, white cables) that then filter through top a USB port cable and plugged into the back of my computer.

I mean it's the new Mac do it's just a thin screen, I would rather leave it and have an external cord.
Why has Mac not allowed for this, they are suppose to be the best & up to date with video software?
Unfortunately, Apple knows best, and will dictate that to its loyal users. They must adapt to the "party line," or move to a PC. That is just the way they think.
Sorry for the bad news,
Hunt

Fcp gone back wards not capturing

Similar Messages

Maybe you are looking for